ssh: update to OpenSSH v8.9p1

Release notes are available at https://www.openssh.com/txt/release-8.9

Some highlights:

* ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for
restricting forwarding and use of keys added to ssh-agent(1)

* ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid
ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the
default KEXAlgorithms list (after the ECDH methods but before the
prime-group DH ones). The next release of OpenSSH is likely to
make this key exchange the default method.

* sshd(8), portable OpenSSH only: this release removes in-built
support for MD5-hashed passwords. If you require these on your
system then we recommend linking against libxcrypt or similar.

Future deprecation notice
=========================

A near-future release of OpenSSH will switch scp(1) from using the
legacy scp/rcp protocol to using SFTP by default.

Legacy scp/rcp performs wildcard expansion of remote filenames (e.g.
"scp host:* .") through the remote shell. This has the side effect of
requiring double quoting of shell meta-characters in file names
included on scp(1) command-lines, otherwise they could be interpreted
as shell commands on the remote side.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.8p1.

Approved by: re (kib@)

Upgrade to OpenSSH 7.7p1.

Upgrade to OpenSSH 7.2p2.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Upgrade to OpenSSH 6.2p1. The most important new features are support
for a key revocation list and more fine-grained authentication control.

Polish diff against upstream.

- Revert unneeded whitespace changes.
- Revert modifications to loginrec.c, as the upstream version already
does the right thing.
- Fix indentation and whitespace of local changes.

Approved by: des
MFC after: 1 month

Upgrade to OpenSSH 5.8p2.

Upgrade to OpenSSH 5.5p1.

Upgrade to OpenSSH 5.4p1.

MFC after: 1 month

Add a missing $FreeBSD$ string.

I was requested to add this string to any file that was modified by my
commit, which I forgot to do so.

Requested by: des

Make OpenSSH work with utmpx.

- Partially revert r184122 (sshd.c). Our ut_host is now big enough to
fit proper hostnames.

- Change config.h to match reality.

- defines.h requires UTMPX_FILE to be set by <utmpx.h> before it allows
the utmpx code to work. This makes no sense to me. I've already
mentioned this upstream.

- Add our own platform-specific handling of lastlog. The version I will
send to the OpenSSH folks will use proper autoconf generated
definitions instead of `#if 1'.

Upgrade to OpenSSH 5.2p1.

MFC after: 3 months

At some point, construct_utmp() was changed to use realhostname() to fill
in the struct utmp due to concerns about the length of the hostname buffer.
However, this breaks the UseDNS option. There is a simpler and better
solution: initialize utmp_len to the correct value (UT_HOSTSIZE instead of
MAXHOSTNAMELEN) and let get_remote_name_or_ip() worry about the size of the
buffer.

PR: bin/97499
Submitted by: Bruce Cran <bruce@cran.org.uk>
MFC after: 1 week

Upgrade to OpenSSH 5.1p1.

I have worked hard to reduce diffs against the vendor branch. One
notable change in that respect is that we no longer prefer DSA over
RSA - the reasons for doing so went away years ago. This may cause
some surprises, as ssh will warn about unknown host keys even for
hosts whose keys haven't changed.

MFC after: 6 weeks

Properly flatten openssh/dist.

Merge conflicts.

MFC after: 1 week

Vendor import of OpenSSH 4.4p1.

Revert inadvertant commit of debugging code.

Introduce a namespace munging hack inspired by NetBSD to avoid polluting
the namespace of applications which inadvertantly link in libssh (usually
through pam_ssh)

Suggested by: lukem@netbsd.org
MFC after: 6 weeks

Merge conflicts.

Vendor import of OpenSSH 4.3p1.

Resolve conflicts.

Vendor import of OpenSSH 4.2p1.

Resolve conflicts.

Vendor import of OpenSSH 4.0p1.

Resolve conflicts

Vendor import of OpenSSH 3.9p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8.1p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8p1.

Resolve conflicts and remove obsolete files.

Sponsored by: registrar.no

Vendor import of OpenSSH 3.7.1p2.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.6.1p1.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.5p1.

Use realhostname_sa(3) so the IP address will be used instead of the
hostname if the latter is too long for utmp.

Submitted by: ru
MFC after: 3 days

Vendor import of OpenSSH 3.3p1.

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.8p1.

Approved by: re (kib@)

Upgrade to OpenSSH 7.7p1.

Upgrade to OpenSSH 7.2p2.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Upgrade to OpenSSH 6.2p1. The most important new features are support
for a key revocation list and more fine-grained authentication control.

Polish diff against upstream.

- Revert unneeded whitespace changes.
- Revert modifications to loginrec.c, as the upstream version already
does the right thing.
- Fix indentation and whitespace of local changes.

Approved by: des
MFC after: 1 month

Upgrade to OpenSSH 5.8p2.

Upgrade to OpenSSH 5.5p1.

Upgrade to OpenSSH 5.4p1.

MFC after: 1 month

Add a missing $FreeBSD$ string.

I was requested to add this string to any file that was modified by my
commit, which I forgot to do so.

Requested by: des

Make OpenSSH work with utmpx.

- Partially revert r184122 (sshd.c). Our ut_host is now big enough to
fit proper hostnames.

- Change config.h to match reality.

- defines.h requires UTMPX_FILE to be set by <utmpx.h> before it allows
the utmpx code to work. This makes no sense to me. I've already
mentioned this upstream.

- Add our own platform-specific handling of lastlog. The version I will
send to the OpenSSH folks will use proper autoconf generated
definitions instead of `#if 1'.

Upgrade to OpenSSH 5.2p1.

MFC after: 3 months

At some point, construct_utmp() was changed to use realhostname() to fill
in the struct utmp due to concerns about the length of the hostname buffer.
However, this breaks the UseDNS option. There is a simpler and better
solution: initialize utmp_len to the correct value (UT_HOSTSIZE instead of
MAXHOSTNAMELEN) and let get_remote_name_or_ip() worry about the size of the
buffer.

PR: bin/97499
Submitted by: Bruce Cran <bruce@cran.org.uk>
MFC after: 1 week

Upgrade to OpenSSH 5.1p1.

I have worked hard to reduce diffs against the vendor branch. One
notable change in that respect is that we no longer prefer DSA over
RSA - the reasons for doing so went away years ago. This may cause
some surprises, as ssh will warn about unknown host keys even for
hosts whose keys haven't changed.

MFC after: 6 weeks

Properly flatten openssh/dist.

Merge conflicts.

MFC after: 1 week

Vendor import of OpenSSH 4.4p1.

Revert inadvertant commit of debugging code.

Introduce a namespace munging hack inspired by NetBSD to avoid polluting
the namespace of applications which inadvertantly link in libssh (usually
through pam_ssh)

Suggested by: lukem@netbsd.org
MFC after: 6 weeks

Merge conflicts.

Vendor import of OpenSSH 4.3p1.

Resolve conflicts.

Vendor import of OpenSSH 4.2p1.

Resolve conflicts.

Vendor import of OpenSSH 4.0p1.

Resolve conflicts

Vendor import of OpenSSH 3.9p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8.1p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8p1.

Resolve conflicts and remove obsolete files.

Sponsored by: registrar.no

Vendor import of OpenSSH 3.7.1p2.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.6.1p1.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.5p1.

Use realhostname_sa(3) so the IP address will be used instead of the
hostname if the latter is too long for utmp.

Submitted by: ru
MFC after: 3 days

Vendor import of OpenSSH 3.3p1.

Polish diff against upstream.

- Revert unneeded whitespace changes.
- Revert modifications to loginrec.c, as the upstream version already
does the right thing.
- Fix indentation and whitespace of local changes.

Approved by: des
MFC after: 1 month

A new jail(8) with a configuration file, to replace the work currently done
by /etc/rc.d/jail.

MFH OpenSSH 5.4p1

Create the altix project branch. The altix project will add support
for the SGI Altix 350 to FreeBSD/ia64. The hardware used for porting
is a two-module system, consisting of a base compute module and a
CPU expansion module. SGI's NUMAFlex architecture can be an excellent
platform to test CPU affinity and NUMA-aware features in FreeBSD.

Add a missing $FreeBSD$ string.

I was requested to add this string to any file that was modified by my
commit, which I forgot to do so.

Requested by: des

Make OpenSSH work with utmpx.

- Partially revert r184122 (sshd.c). Our ut_host is now big enough to
fit proper hostnames.

- Change config.h to match reality.

- defines.h requires UTMPX_FILE to be set by <utmpx.h> before it allows
the utmpx code to work. This makes no sense to me. I've already
mentioned this upstream.

- Add our own platform-specific handling of lastlog. The version I will
send to the OpenSSH folks will use proper autoconf generated
definitions instead of `#if 1'.

At some point, construct_utmp() was changed to use realhostname() to fill
in the struct utmp due to concerns about the length of the hostname buffer.
However, this breaks the UseDNS option. There is a simpler and better
solution: initialize utmp_len to the correct value (UT_HOSTSIZE instead of
MAXHOSTNAMELEN) and let get_remote_name_or_ip() worry about the size of the
buffer.

PR: bin/97499
Submitted by: Bruce Cran <bruce@cran.org.uk>
MFC after: 1 week

- Import the HEAD csup code which is the basis for the cvsmode work.

Merge conflicts.

MFC after: 1 week

Vendor import of OpenSSH 4.4p1.

Revert inadvertant commit of debugging code.

Introduce a namespace munging hack inspired by NetBSD to avoid polluting
the namespace of applications which inadvertantly link in libssh (usually
through pam_ssh)

Suggested by: lukem@netbsd.org
MFC after: 6 weeks

Merge conflicts.

Vendor import of OpenSSH 4.3p1.

Resolve conflicts.

Vendor import of OpenSSH 4.2p1.

Resolve conflicts.

Vendor import of OpenSSH 4.0p1.

Resolve conflicts

Vendor import of OpenSSH 3.9p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8.1p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8p1.

Resolve conflicts and remove obsolete files.

Sponsored by: registrar.no

Vendor import of OpenSSH 3.7.1p2.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.6.1p1.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.5p1.

Use realhostname_sa(3) so the IP address will be used instead of the
hostname if the latter is too long for utmp.

Submitted by: ru
MFC after: 3 days

Vendor import of OpenSSH 3.3p1.