ssh: Update to OpenSSH 9.3p1

This release fixes a number of security bugs and has minor new
features and bug fixes. Security fixes, from the release notes
(https://www.openssh.com/txt/release-9.3):

This release contains fixes for a security problem and a memory
safety problem. The memory safety problem is not believed to be
exploitable, but we report most network-reachable memory faults as
security bugs.

* ssh-add(1): when adding smartcard keys to ssh-agent(1) with the
per-hop destination constraints (ssh-add -h ...) added in OpenSSH
8.9, a logic error prevented the constraints from being
communicated to the agent. This resulted in the keys being added
without constraints. The common cases of non-smartcard keys and
keys without destination constraints are unaffected. This problem
was reported by Luci Stanescu.

* ssh(1): Portable OpenSSH provides an implementation of the
getrrsetbyname(3) function if the standard library does not
provide it, for use by the VerifyHostKeyDNS feature. A
specifically crafted DNS response could cause this function to
perform an out-of-bounds read of adjacent stack data, but this
condition does not appear to be exploitable beyond denial-of-
service to the ssh(1) client.

The getrrsetbyname(3) replacement is only included if the system's
standard library lacks this function and portable OpenSSH was not
compiled with the ldns library (--with-ldns). getrrsetbyname(3) is
only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This
problem was found by the Coverity static analyzer.

Sponsored by: The FreeBSD Foundation

ssh: fix double-free caused by compat_kex_proposal()

Security: CVE-2023-25136
Obtained from: OpenSSH-portable commit 12da78233364
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH 9.1p1

Release notes are available at https://www.openssh.com/txt/release-9.1

9.1 contains fixes for three minor memory safety problems; these have
lready been merged to the copy of OpenSSH 9.0 that is in the FreeBSD base
system.

Some highlights copied from the release notes:

Potentially-incompatible changes
--------------------------------

* ssh(1), sshd(8): SetEnv directives in ssh_config and sshd_config
are now first-match-wins to match other directives. Previously
if an environment variable was multiply specified the last set
value would have been used. bz3438

* ssh-keygen(8): ssh-keygen -A (generate all default host key types)
will no longer generate DSA keys, as these are insecure and have
not been used by default for some years.

New features
------------

* ssh(1), sshd(8): add a RequiredRSASize directive to set a minimum
RSA key length. Keys below this length will be ignored for user
authentication and for host authentication in sshd(8).

* sftp-server(8): add a "users-groups-by-id@openssh.com" extension
request that allows the client to obtain user/group names that
correspond to a set of uids/gids.

* sftp(1): use "users-groups-by-id@openssh.com" sftp-server
extension (when available) to fill in user/group names for
directory listings.

* sftp-server(8): support the "home-directory" extension request
defined in draft-ietf-secsh-filexfer-extensions-00. This overlaps
a bit with the existing "expand-path@openssh.com", but some other
clients support it.

* ssh-keygen(1), sshd(8): allow certificate validity intervals,
sshsig verification times and authorized_keys expiry-time options
to accept dates in the UTC time zone in addition to the default
of interpreting them in the system time zone. YYYYMMDD and
YYMMDDHHMM[SS] dates/times will be interpreted as UTC if suffixed
with a 'Z' character.

Also allow certificate validity intervals to be specified in raw
seconds-since-epoch as hex value, e.g. -V 0x1234:0x4567890. This
is intended for use by regress tests and other tools that call
ssh-keygen as part of a CA workflow. bz3468

* sftp(1): allow arguments to the sftp -D option, e.g. sftp -D
"/usr/libexec/sftp-server -el debug3"

* ssh-keygen(1): allow the existing -U (use agent) flag to work
with "-Y sign" operations, where it will be interpreted to require
that the private keys is hosted in an agent; bz3429

MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v8.8p1

OpenSSH v8.8p1 was motivated primarily by a security update and
deprecation of RSA/SHA1 signatures. It also has a few minor bug fixes.

The security update was already applied to FreeBSD as an independent
change, and the RSA/SHA1 deprecation is excluded from this commit but
will immediately follow.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.8p1.

Approved by: re (kib@)

Upgrade to OpenSSH 7.7p1.

Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1.

This completely removes client-side support for the SSH 1 protocol,
which was already disabled in 12 but is still enabled in 11. For that
reason, we will not be able to merge 7.6p1 or newer back to 11.

Upgrade to OpenSSH 7.5p1.

Upgrade to OpenSSH 7.3p1.

Upgrade to OpenSSH 7.1p2.

Remove RCS tags from files in which we no longer have any local
modifications, and add them to two files in which we do.

Upgrade to OpenSSH 7.0p1.

Upgrade to OpenSSH 6.9p1.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.7p1, retaining libwrap support (which has been removed
upstream) and a number of security fixes which we had already backported.

MFC after: 1 week

As previously threatened, remove the HPN patch from OpenSSH.

Remove /* $FreeBSD$ */ from files that already have __RCSID("$FreeBSD$").

Apply upstream patch for EC calculation bug and bump version addendum.

Add a pre-merge script which reverts mechanical changes such as added
$FreeBSD$ tags and man page dates.

Add a post-merge script which reapplies these changes.

Run both scripts to normalize the existing code base. As a result, many
files which should have had $FreeBSD$ tags but didn't now have them.

Partly rewrite the upgrade instructions and remove the now outdated
list of tricks.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Upgrade to OpenSSH 6.2p1. The most important new features are support
for a key revocation list and more fine-grained authentication control.

Upgrade OpenSSH to 6.1p1.

Add support for dynamically adjusted buffers to allow the full use of
the bandwidth of long fat pipes (i.e. 100Mbps+ trans-oceanic or
trans-continental links). Bandwidth-delay products up to 64MB are
supported.

Also add support (not compiled by default) for the None cypher. The
None cypher can only be enabled on non-interactive sessions (those
without a pty where -T was not used) and must be enabled in both
the client and server configuration files and on the client command
line. Additionally, the None cypher will only be activated after
authentication is complete. To enable the None cypher you must add
-DNONE_CIPHER_ENABLED to CFLAGS via the make command line or in
/etc/make.conf.

This code is a style(9) compliant version of these features extracted
from the patches published at:

http://www.psc.edu/networking/projects/hpn-ssh/

Merging this patch has been a collaboration between me and Bjoern.

Reviewed by: bz
Approved by: re (kib), des (maintainer)

Upgrade to OpenSSH 5.2p1.

MFC after: 3 months

Upgrade to OpenSSH 5.1p1.

I have worked hard to reduce diffs against the vendor branch. One
notable change in that respect is that we no longer prefer DSA over
RSA - the reasons for doing so went away years ago. This may cause
some surprises, as ssh will warn about unknown host keys even for
hosts whose keys haven't changed.

MFC after: 6 weeks

Yet another file with no local changes.

Properly flatten openssh/dist.

Merge conflicts.

MFC after: 1 week

Vendor import of OpenSSH 4.4p1.

Resolve conflicts.

Vendor import of OpenSSH 4.0p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8p1.

Resolve conflicts and remove obsolete files.

Sponsored by: registrar.no

Vendor import of OpenSSH 3.7.1p2.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.6.1p1.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.5p1.

Forcibly revert to mainline.

Resolve conflicts. Known issues:

- sshd fails to set TERM correctly.
- privilege separation may break PAM and is currently turned off.
- man pages have not yet been updated

I will have these issues resolved, and privilege separation turned on by
default, in time for DP2.

Sponsored by: DARPA, NAI Labs

Vendor import of OpenSSH 3.3.

Fix conflicts.

Vendor import of OpenSSH 3.1

Fix conflicts for OpenSSH 2.9.

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

Make password attacks based on traffic analysis harder by requiring that
"non-echoed" characters are still echoed back in a null packet, as well
as pad passwords sent to not give hints to the length otherwise.

Obtained from: OpenBSD

Update to OpenSSH 2.3.0 with FreeBSD modifications. OpenSSH 2.3.0
new features description elided in favor of checking out their
website.

Important new FreeBSD-version stuff: PAM support has been worked
in, partially from the "Unix" OpenSSH version, and a lot due to the
work of Eivind Eklend, too.

This requires at least the following in pam.conf:

sshd auth sufficient pam_skey.so
sshd auth required pam_unix.so try_first_pass
sshd session required pam_permit.so

Parts by: Eivind Eklend <eivind@FreeBSD.org>

Import of OpenSSH 2.3.0 (virgin OpenBSD source release).

Initial import of OpenSSH post-2.2.0 snapshot dated 2000-09-09

Initial import of OpenSSH snapshot from 2000/05/30

Obtained from: OpenBSD

Initial import of OpenSSH v2.1.

Vendor import of OpenSSH.

ssh: fix double-free caused by compat_kex_proposal()

Security: CVE-2023-25136
Obtained from: OpenSSH-portable commit 12da78233364
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH 9.1p1

Release notes are available at https://www.openssh.com/txt/release-9.1

9.1 contains fixes for three minor memory safety problems; these have
lready been merged to the copy of OpenSSH 9.0 that is in the FreeBSD base
system.

Some highlights copied from the release notes:

Potentially-incompatible changes
--------------------------------

* ssh(1), sshd(8): SetEnv directives in ssh_config and sshd_config
are now first-match-wins to match other directives. Previously
if an environment variable was multiply specified the last set
value would have been used. bz3438

* ssh-keygen(8): ssh-keygen -A (generate all default host key types)
will no longer generate DSA keys, as these are insecure and have
not been used by default for some years.

New features
------------

* ssh(1), sshd(8): add a RequiredRSASize directive to set a minimum
RSA key length. Keys below this length will be ignored for user
authentication and for host authentication in sshd(8).

* sftp-server(8): add a "users-groups-by-id@openssh.com" extension
request that allows the client to obtain user/group names that
correspond to a set of uids/gids.

* sftp(1): use "users-groups-by-id@openssh.com" sftp-server
extension (when available) to fill in user/group names for
directory listings.

* sftp-server(8): support the "home-directory" extension request
defined in draft-ietf-secsh-filexfer-extensions-00. This overlaps
a bit with the existing "expand-path@openssh.com", but some other
clients support it.

* ssh-keygen(1), sshd(8): allow certificate validity intervals,
sshsig verification times and authorized_keys expiry-time options
to accept dates in the UTC time zone in addition to the default
of interpreting them in the system time zone. YYYYMMDD and
YYMMDDHHMM[SS] dates/times will be interpreted as UTC if suffixed
with a 'Z' character.

Also allow certificate validity intervals to be specified in raw
seconds-since-epoch as hex value, e.g. -V 0x1234:0x4567890. This
is intended for use by regress tests and other tools that call
ssh-keygen as part of a CA workflow. bz3468

* sftp(1): allow arguments to the sftp -D option, e.g. sftp -D
"/usr/libexec/sftp-server -el debug3"

* ssh-keygen(1): allow the existing -U (use agent) flag to work
with "-Y sign" operations, where it will be interpreted to require
that the private keys is hosted in an agent; bz3429

MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v8.8p1

OpenSSH v8.8p1 was motivated primarily by a security update and
deprecation of RSA/SHA1 signatures. It also has a few minor bug fixes.

The security update was already applied to FreeBSD as an independent
change, and the RSA/SHA1 deprecation is excluded from this commit but
will immediately follow.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.8p1.

Approved by: re (kib@)

Upgrade to OpenSSH 7.7p1.

Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1.

This completely removes client-side support for the SSH 1 protocol,
which was already disabled in 12 but is still enabled in 11. For that
reason, we will not be able to merge 7.6p1 or newer back to 11.

Upgrade to OpenSSH 7.5p1.

Upgrade to OpenSSH 7.3p1.

Upgrade to OpenSSH 7.1p2.

Remove RCS tags from files in which we no longer have any local
modifications, and add them to two files in which we do.

Upgrade to OpenSSH 7.0p1.

Upgrade to OpenSSH 6.9p1.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.7p1, retaining libwrap support (which has been removed
upstream) and a number of security fixes which we had already backported.

MFC after: 1 week

As previously threatened, remove the HPN patch from OpenSSH.

Remove /* $FreeBSD$ */ from files that already have __RCSID("$FreeBSD$").

Apply upstream patch for EC calculation bug and bump version addendum.

Add a pre-merge script which reverts mechanical changes such as added
$FreeBSD$ tags and man page dates.

Add a post-merge script which reapplies these changes.

Run both scripts to normalize the existing code base. As a result, many
files which should have had $FreeBSD$ tags but didn't now have them.

Partly rewrite the upgrade instructions and remove the now outdated
list of tricks.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Upgrade to OpenSSH 6.2p1. The most important new features are support
for a key revocation list and more fine-grained authentication control.

Upgrade OpenSSH to 6.1p1.

Add support for dynamically adjusted buffers to allow the full use of
the bandwidth of long fat pipes (i.e. 100Mbps+ trans-oceanic or
trans-continental links). Bandwidth-delay products up to 64MB are
supported.

Also add support (not compiled by default) for the None cypher. The
None cypher can only be enabled on non-interactive sessions (those
without a pty where -T was not used) and must be enabled in both
the client and server configuration files and on the client command
line. Additionally, the None cypher will only be activated after
authentication is complete. To enable the None cypher you must add
-DNONE_CIPHER_ENABLED to CFLAGS via the make command line or in
/etc/make.conf.

This code is a style(9) compliant version of these features extracted
from the patches published at:

http://www.psc.edu/networking/projects/hpn-ssh/

Merging this patch has been a collaboration between me and Bjoern.

Reviewed by: bz
Approved by: re (kib), des (maintainer)

Upgrade to OpenSSH 5.2p1.

MFC after: 3 months

Upgrade to OpenSSH 5.1p1.

I have worked hard to reduce diffs against the vendor branch. One
notable change in that respect is that we no longer prefer DSA over
RSA - the reasons for doing so went away years ago. This may cause
some surprises, as ssh will warn about unknown host keys even for
hosts whose keys haven't changed.

MFC after: 6 weeks

Yet another file with no local changes.

Properly flatten openssh/dist.

Merge conflicts.

MFC after: 1 week

Vendor import of OpenSSH 4.4p1.

Resolve conflicts.

Vendor import of OpenSSH 4.0p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8p1.

Resolve conflicts and remove obsolete files.

Sponsored by: registrar.no

Vendor import of OpenSSH 3.7.1p2.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.6.1p1.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.5p1.

Forcibly revert to mainline.

Resolve conflicts. Known issues:

- sshd fails to set TERM correctly.
- privilege separation may break PAM and is currently turned off.
- man pages have not yet been updated

I will have these issues resolved, and privilege separation turned on by
default, in time for DP2.

Sponsored by: DARPA, NAI Labs

Vendor import of OpenSSH 3.3.

Fix conflicts.

Vendor import of OpenSSH 3.1

Fix conflicts for OpenSSH 2.9.

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

Make password attacks based on traffic analysis harder by requiring that
"non-echoed" characters are still echoed back in a null packet, as well
as pad passwords sent to not give hints to the length otherwise.

Obtained from: OpenBSD

Update to OpenSSH 2.3.0 with FreeBSD modifications. OpenSSH 2.3.0
new features description elided in favor of checking out their
website.

Important new FreeBSD-version stuff: PAM support has been worked
in, partially from the "Unix" OpenSSH version, and a lot due to the
work of Eivind Eklend, too.

This requires at least the following in pam.conf:

sshd auth sufficient pam_skey.so
sshd auth required pam_unix.so try_first_pass
sshd session required pam_permit.so

Parts by: Eivind Eklend <eivind@FreeBSD.org>

Import of OpenSSH 2.3.0 (virgin OpenBSD source release).

Initial import of OpenSSH post-2.2.0 snapshot dated 2000-09-09

Initial import of OpenSSH snapshot from 2000/05/30

Obtained from: OpenBSD

Initial import of OpenSSH v2.1.

Vendor import of OpenSSH.

ssh: update to OpenSSH v8.8p1

OpenSSH v8.8p1 was motivated primarily by a security update and
deprecation of RSA/SHA1 signatures. It also has a few minor bug fixes.

The security update was already applied to FreeBSD as an independent
change, and the RSA/SHA1 deprecation is excluded from this commit but
will immediately follow.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.8p1.

Approved by: re (kib@)

Upgrade to OpenSSH 7.7p1.

Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1.

This completely removes client-side support for the SSH 1 protocol,
which was already disabled in 12 but is still enabled in 11. For that
reason, we will not be able to merge 7.6p1 or newer back to 11.

Upgrade to OpenSSH 7.5p1.

Upgrade to OpenSSH 7.3p1.

Upgrade to OpenSSH 7.1p2.

Remove RCS tags from files in which we no longer have any local
modifications, and add them to two files in which we do.

Upgrade to OpenSSH 7.0p1.

Upgrade to OpenSSH 6.9p1.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.7p1, retaining libwrap support (which has been removed
upstream) and a number of security fixes which we had already backported.

MFC after: 1 week

As previously threatened, remove the HPN patch from OpenSSH.

Remove /* $FreeBSD$ */ from files that already have __RCSID("$FreeBSD$").

Apply upstream patch for EC calculation bug and bump version addendum.

Add a pre-merge script which reverts mechanical changes such as added
$FreeBSD$ tags and man page dates.

Add a post-merge script which reapplies these changes.

Run both scripts to normalize the existing code base. As a result, many
files which should have had $FreeBSD$ tags but didn't now have them.

Partly rewrite the upgrade instructions and remove the now outdated
list of tricks.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Upgrade to OpenSSH 6.2p1. The most important new features are support
for a key revocation list and more fine-grained authentication control.

Upgrade OpenSSH to 6.1p1.

Add support for dynamically adjusted buffers to allow the full use of
the bandwidth of long fat pipes (i.e. 100Mbps+ trans-oceanic or
trans-continental links). Bandwidth-delay products up to 64MB are
supported.

Also add support (not compiled by default) for the None cypher. The
None cypher can only be enabled on non-interactive sessions (those
without a pty where -T was not used) and must be enabled in both
the client and server configuration files and on the client command
line. Additionally, the None cypher will only be activated after
authentication is complete. To enable the None cypher you must add
-DNONE_CIPHER_ENABLED to CFLAGS via the make command line or in
/etc/make.conf.

This code is a style(9) compliant version of these features extracted
from the patches published at:

http://www.psc.edu/networking/projects/hpn-ssh/

Merging this patch has been a collaboration between me and Bjoern.

Reviewed by: bz
Approved by: re (kib), des (maintainer)

Upgrade to OpenSSH 5.2p1.

MFC after: 3 months

Upgrade to OpenSSH 5.1p1.

I have worked hard to reduce diffs against the vendor branch. One
notable change in that respect is that we no longer prefer DSA over
RSA - the reasons for doing so went away years ago. This may cause
some surprises, as ssh will warn about unknown host keys even for
hosts whose keys haven't changed.

MFC after: 6 weeks

Yet another file with no local changes.

Properly flatten openssh/dist.

Merge conflicts.

MFC after: 1 week

Vendor import of OpenSSH 4.4p1.

Resolve conflicts.

Vendor import of OpenSSH 4.0p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8p1.

Resolve conflicts and remove obsolete files.

Sponsored by: registrar.no

Vendor import of OpenSSH 3.7.1p2.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.6.1p1.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.5p1.

Forcibly revert to mainline.

Resolve conflicts. Known issues:

- sshd fails to set TERM correctly.
- privilege separation may break PAM and is currently turned off.
- man pages have not yet been updated

I will have these issues resolved, and privilege separation turned on by
default, in time for DP2.

Sponsored by: DARPA, NAI Labs

Vendor import of OpenSSH 3.3.

Fix conflicts.

Vendor import of OpenSSH 3.1

Fix conflicts for OpenSSH 2.9.

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

Make password attacks based on traffic analysis harder by requiring that
"non-echoed" characters are still echoed back in a null packet, as well
as pad passwords sent to not give hints to the length otherwise.

Obtained from: OpenBSD

Update to OpenSSH 2.3.0 with FreeBSD modifications. OpenSSH 2.3.0
new features description elided in favor of checking out their
website.

Important new FreeBSD-version stuff: PAM support has been worked
in, partially from the "Unix" OpenSSH version, and a lot due to the
work of Eivind Eklend, too.

This requires at least the following in pam.conf:

sshd auth sufficient pam_skey.so
sshd auth required pam_unix.so try_first_pass
sshd session required pam_permit.so

Parts by: Eivind Eklend <eivind@FreeBSD.org>

Import of OpenSSH 2.3.0 (virgin OpenBSD source release).

Initial import of OpenSSH post-2.2.0 snapshot dated 2000-09-09

Initial import of OpenSSH snapshot from 2000/05/30

Obtained from: OpenBSD

Initial import of OpenSSH v2.1.

Vendor import of OpenSSH.

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.8p1.

Approved by: re (kib@)

Upgrade to OpenSSH 7.7p1.

Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1.

This completely removes client-side support for the SSH 1 protocol,
which was already disabled in 12 but is still enabled in 11. For that
reason, we will not be able to merge 7.6p1 or newer back to 11.

Upgrade to OpenSSH 7.5p1.

Upgrade to OpenSSH 7.3p1.

Upgrade to OpenSSH 7.1p2.

Remove RCS tags from files in which we no longer have any local
modifications, and add them to two files in which we do.

Upgrade to OpenSSH 7.0p1.

Upgrade to OpenSSH 6.9p1.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.7p1, retaining libwrap support (which has been removed
upstream) and a number of security fixes which we had already backported.

MFC after: 1 week

As previously threatened, remove the HPN patch from OpenSSH.

Remove /* $FreeBSD$ */ from files that already have __RCSID("$FreeBSD$").

Apply upstream patch for EC calculation bug and bump version addendum.

Add a pre-merge script which reverts mechanical changes such as added
$FreeBSD$ tags and man page dates.

Add a post-merge script which reapplies these changes.

Run both scripts to normalize the existing code base. As a result, many
files which should have had $FreeBSD$ tags but didn't now have them.

Partly rewrite the upgrade instructions and remove the now outdated
list of tricks.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Upgrade to OpenSSH 6.2p1. The most important new features are support
for a key revocation list and more fine-grained authentication control.

Upgrade OpenSSH to 6.1p1.

Add support for dynamically adjusted buffers to allow the full use of
the bandwidth of long fat pipes (i.e. 100Mbps+ trans-oceanic or
trans-continental links). Bandwidth-delay products up to 64MB are
supported.

Also add support (not compiled by default) for the None cypher. The
None cypher can only be enabled on non-interactive sessions (those
without a pty where -T was not used) and must be enabled in both
the client and server configuration files and on the client command
line. Additionally, the None cypher will only be activated after
authentication is complete. To enable the None cypher you must add
-DNONE_CIPHER_ENABLED to CFLAGS via the make command line or in
/etc/make.conf.

This code is a style(9) compliant version of these features extracted
from the patches published at:

http://www.psc.edu/networking/projects/hpn-ssh/

Merging this patch has been a collaboration between me and Bjoern.

Reviewed by: bz
Approved by: re (kib), des (maintainer)

Upgrade to OpenSSH 5.2p1.

MFC after: 3 months

Upgrade to OpenSSH 5.1p1.

I have worked hard to reduce diffs against the vendor branch. One
notable change in that respect is that we no longer prefer DSA over
RSA - the reasons for doing so went away years ago. This may cause
some surprises, as ssh will warn about unknown host keys even for
hosts whose keys haven't changed.

MFC after: 6 weeks

Yet another file with no local changes.

Properly flatten openssh/dist.

Merge conflicts.

MFC after: 1 week

Vendor import of OpenSSH 4.4p1.

Resolve conflicts.

Vendor import of OpenSSH 4.0p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8p1.

Resolve conflicts and remove obsolete files.

Sponsored by: registrar.no

Vendor import of OpenSSH 3.7.1p2.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.6.1p1.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.5p1.

Forcibly revert to mainline.

Resolve conflicts. Known issues:

- sshd fails to set TERM correctly.
- privilege separation may break PAM and is currently turned off.
- man pages have not yet been updated

I will have these issues resolved, and privilege separation turned on by
default, in time for DP2.

Sponsored by: DARPA, NAI Labs

Vendor import of OpenSSH 3.3.

Fix conflicts.

Vendor import of OpenSSH 3.1

Fix conflicts for OpenSSH 2.9.

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

Make password attacks based on traffic analysis harder by requiring that
"non-echoed" characters are still echoed back in a null packet, as well
as pad passwords sent to not give hints to the length otherwise.

Obtained from: OpenBSD

Update to OpenSSH 2.3.0 with FreeBSD modifications. OpenSSH 2.3.0
new features description elided in favor of checking out their
website.

Important new FreeBSD-version stuff: PAM support has been worked
in, partially from the "Unix" OpenSSH version, and a lot due to the
work of Eivind Eklend, too.

This requires at least the following in pam.conf:

sshd auth sufficient pam_skey.so
sshd auth required pam_unix.so try_first_pass
sshd session required pam_permit.so

Parts by: Eivind Eklend <eivind@FreeBSD.org>

Import of OpenSSH 2.3.0 (virgin OpenBSD source release).

Initial import of OpenSSH post-2.2.0 snapshot dated 2000-09-09

Initial import of OpenSSH snapshot from 2000/05/30

Obtained from: OpenBSD

Initial import of OpenSSH v2.1.

Vendor import of OpenSSH.

Remove RCS tags from files in which we no longer have any local
modifications, and add them to two files in which we do.

As previously threatened, remove the HPN patch from OpenSSH.

Remove /* $FreeBSD$ */ from files that already have __RCSID("$FreeBSD$").

Add a pre-merge script which reverts mechanical changes such as added
$FreeBSD$ tags and man page dates.

Add a post-merge script which reapplies these changes.

Run both scripts to normalize the existing code base. As a result, many
files which should have had $FreeBSD$ tags but didn't now have them.

Partly rewrite the upgrade instructions and remove the now outdated
list of tricks.

Add support for dynamically adjusted buffers to allow the full use of
the bandwidth of long fat pipes (i.e. 100Mbps+ trans-oceanic or
trans-continental links). Bandwidth-delay products up to 64MB are
supported.

Also add support (not compiled by default) for the None cypher. The
None cypher can only be enabled on non-interactive sessions (those
without a pty where -T was not used) and must be enabled in both
the client and server configuration files and on the client command
line. Additionally, the None cypher will only be activated after
authentication is complete. To enable the None cypher you must add
-DNONE_CIPHER_ENABLED to CFLAGS via the make command line or in
/etc/make.conf.

This code is a style(9) compliant version of these features extracted
from the patches published at:

http://www.psc.edu/networking/projects/hpn-ssh/

Merging this patch has been a collaboration between me and Bjoern.

Reviewed by: bz
Approved by: re (kib), des (maintainer)

A new jail(8) with a configuration file, to replace the work currently done
by /etc/rc.d/jail.

Create the altix project branch. The altix project will add support
for the SGI Altix 350 to FreeBSD/ia64. The hardware used for porting
is a two-module system, consisting of a base compute module and a
CPU expansion module. SGI's NUMAFlex architecture can be an excellent
platform to test CPU affinity and NUMA-aware features in FreeBSD.

- Import the HEAD csup code which is the basis for the cvsmode work.

Yet another file with no local changes.

Merge conflicts.

MFC after: 1 week

Vendor import of OpenSSH 4.4p1.

Resolve conflicts.

Vendor import of OpenSSH 4.0p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8p1.

Resolve conflicts and remove obsolete files.

Sponsored by: registrar.no

Vendor import of OpenSSH 3.7.1p2.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.6.1p1.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.5p1.

Forcibly revert to mainline.

Resolve conflicts. Known issues:

- sshd fails to set TERM correctly.
- privilege separation may break PAM and is currently turned off.
- man pages have not yet been updated

I will have these issues resolved, and privilege separation turned on by
default, in time for DP2.

Sponsored by: DARPA, NAI Labs

Vendor import of OpenSSH 3.3.

Fix conflicts.

Vendor import of OpenSSH 3.1

Fix conflicts for OpenSSH 2.9.

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

Make password attacks based on traffic analysis harder by requiring that
"non-echoed" characters are still echoed back in a null packet, as well
as pad passwords sent to not give hints to the length otherwise.

Obtained from: OpenBSD

Update to OpenSSH 2.3.0 with FreeBSD modifications. OpenSSH 2.3.0
new features description elided in favor of checking out their
website.

Important new FreeBSD-version stuff: PAM support has been worked
in, partially from the "Unix" OpenSSH version, and a lot due to the
work of Eivind Eklend, too.

This requires at least the following in pam.conf:

sshd auth sufficient pam_skey.so
sshd auth required pam_unix.so try_first_pass
sshd session required pam_permit.so

Parts by: Eivind Eklend <eivind@FreeBSD.org>

Import of OpenSSH 2.3.0 (virgin OpenBSD source release).

Initial import of OpenSSH post-2.2.0 snapshot dated 2000-09-09

Initial import of OpenSSH snapshot from 2000/05/30

Obtained from: OpenBSD

Initial import of OpenSSH v2.1.

Vendor import of OpenSSH.