Copy stable/9 to releng/9.3 as part of the 9.3-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC r241144, r241160:
Implement SATA revision (speed) control for legacy SATA controller for
both boot (via loader tunables) and run-time (via `camcontrol negotiate`).
Tested to work at least on NVIDIA MCP55 chipset.

MFC: r237235

Document the hw.ahci.force tunable here, too, as it's also used by
ataahci(4) and atanvidia(4).

MFC r232380:
Fix names of some Marvell SATA chips. It looks like chips with proprietary
interface supported by mvs(4) are 88SX, while AHCI-like chips are 88SE.

PR: kern/165271

Copy head to stable/9 as part of 9.0-RELEASE release cycle.

Approved by: re (implicit)

Wording, grammar and markup cleanup.

PR: 159948
Submitted by: Ben Kaduk <kaduk@mit.edu>
Approved by: re (kib)

Update ata(4) manual page, reflecting migration to CAM-based ATA stack
(`options ATA_CAM` enabled by default).

Approved by: re (kib)

Re-encode files from ISO-8859-1 to UTF-8

document that most of ioctl requests in cd(4) are implemented by acd(4)..

Add VIA VX900 to the list of supported chipsets.

Cosmetic change:
Wrap lines for SiS and Promise entries to 80 columns.
This doesn't change appearance in page rendered with troff or man.cgi.

PR: docs/146195
Approved by: kib (mentor)
MFC after: 1 week

Revert changes of 'assure' to 'ensure' made in r211936.

Approved by: rrs (mentor)

Fix incorrect usage of 'assure' and 'insure'.

Approved by: rrs (mentor)

Fix a bunch of typos and spelling mistakes.

Add ata(4) ability to limit initial ATA mode for devices via device hints.
After boot this mode can be changed with atacontrol/camcontrol as usual.
It works for both legacy and ATA_CAM wrapper mode.

PR: kern/123980

Add some more supported controllers.
Crosslink with CAM ATA man pages.

Refer more recently added Marvell chips.

Document support for more chips.

Document new hint.atapci.X.msi and hint.ata.X.pm_level tunables.

Note recently added ICH10 support

ITE IT8213F support.

Fix mdoc markup in r181825.

Document the addition of the hw.ata.ata_dma_check_80pin tunable.

Submitted by: Patrick Lamaizière <patfbsd -at- davenulle.org>
MFC after: 1 week

AMD CS5536 and VIA 8237S support.

Approved by: re (blanket)

Update for ICH9 support.

Submitted by: simon
Approved by: re (blanket)

Document Silicon Image SiI 3124 and SiI 3132 support.

Document NetCell NC3000 and NC5000 support.

Document Marvell 6101/6145 support.

New supported JMicron, ALI and ServerWorks chipsets.

MFC after: 3 days

document that NCQ is not yet supported.

PR: kern/106343

Document VIA 8237A support.

Note Intel ICH8 and ESB2 support.

Document ServerWorks HT1000 support.

Document JMicron JMB361, 365 and 366 support.

MFC after: 3 days

JMicron JMB363 support.

Document JMicron JMB360.

Document new support for Marvell chipsets.

Add Via VT8251 support.

Add support for ATI IXP[234]00.

s/PDC2061/PDC20621

Approved by: brueffer (mentor)

* Be more specific about supported ALI-chipsets.

* Add two missing dots.

Approved by: brueffer (mentor)

Update hardware section:

* Document existing support for:
- CMD 646U2
- Highpoint HPT372N
- Intel 6300ESB
- Intel ICH7
- Nvidia nForce2 MCP
- Nvidia nForce3 MCP
- Nvidia nForce3 Pro
- Nvidia nForce4
- Promise PDC20571
- Promise PDC20575
- Promise PDC20579
- Promise PDC20580
- Promise PDC20621
- Promise PDC20622
- Promise PDC40518
- Promise PDC40519
- SIS 180
- SIS 181
- SIS 182
- SIS 965
- VIA VT6410
- VIA VT6420
- VIA VT6421

* Remove HPT366 duplicate

Approved by: brueffer (mentor)

Promise PDC4071[89] support.

Document ITE IT8211F support.

hw.ata.wc can cause data loss on crashes too. This brings the
description of the hw.ata.wc in sync with tuning(7)

PR: docs/84264
Submitted by: Gary W. Swearingen

Intel 31244 support.

Xref ataraid(4).

Document support for the ITE IT8212F.

MFC after: 3 days

Note that the ICH6 controller is supported.

Reviewed by: sos

And this, kids, is what happens if you act on a patch without looking
at the mailing list to see if there isn't any more discussion just
around the corner. Here's the update to the other part of the manpage
that deals with the hw.ata.atapi_dma loader tunable and initializing
ATAPI devices in PIO or DMA mode.

PR: 75021
Submitted by: Craig Rodrigues <rodrigc@crodrigues.org>
Spotted by: Joel Dahl <joel@automatvapen.se>

Reflect the change of the hw.ata.atapi_dma sysctl default in rev. 1.217 of
src/sys/dev/ata/ata-all.c from PIO to DMA.

Submitted by: Craig Rodrigues <rodrigc@crodrigues.org>
MFC after: 1 week

Spelling fixes.

Assorted markup, spelling, and grammar fixes.

Add SiI3512.

Fix sorting in the device list

Add SIS964 to the list of supported chipsets

Submitted by: bmah

Back out rev. 1.40

The hardware notes were wrong WRT supported chipsets (northbridges are not
ata related)

Submitted by: bmah

Sync the list of supported SiS chips with the hardware notes

Add SiI3114 to the list of supported chipsets

Grammar.

PR: docs/60158
Submitted by: Lukas Ertl
MFC after: 1 week

Update.

mdoc(7) cleanup:
- Add reference to atapicam(4).
- Fix hard sentence breaks.
- Fix spelling of .Nm macro.
- Remove a bit of EOL whitespace.

Start of new ATA man page that reflects the curretn state of art.
mdoc handling possibly fragile :)

Add support for the PC98 platform to the ATA driver.
This mostly consists of functionality to serialize accesses to
the two ATA channels (which can also be used to "fix" certain
PCI based controllers).
Add support for Acard controllers.
Enable the ATA driver in PC98 GENERIC, and add device hints.
Update man page with latest support.

The PC98 core team has kindly provided me with a PC98
machine that made this all possible, thanks to all that
contributed to that effort, without that this would
probably newer have been possible..

Approved by: re@

mdoc(7) police: scheduled sweep.

Approved by: re

write caching is enabled by default -- reflect this in manpage

Approved by: sos
MFC after: 0 days

Update supported chipset list.

GXP ATA drives also supports TQ

Document support for VIA 82C596 ATA-33 and ATA-66.

Fix alignment of the chipsets to the largest one described.

Document HPT372 support.

We support the Intel ICH3 [ATA-100] chipset as well.

Update man pages in the section 4 to match the reality in -CURRENT.

- Change lines referring to kernel configuration file:
device foo0 at isa port xxx irq yyy...
to
device foo
Describe resource "hints" in /boot/device.hints.

- Try to describe resource allocation and probe/attach behavior in the
newbus framework.

Update with latest chipset supports.

Fix alphabetical order of supported chipsets.

mdoc(7) police: add missing punctuation.

Be consistent with the way we talk about sysctl values.

PR: docs/30343
Submitted by: Giorgos Keramidas <charon@labs.gr>

Removed whitespace at end-of-line; no content changes. I simply did
cd src/share; find man[1-9] -type f|xargs perl -pi -e 's/[ \t]+$//'

BTW, what editors are the culprits? I'm using vim and it shows
me whitespace at EOL in troff files with a thick blue block...

Reviewed by: Silence from cvs diff -b
MFC after: 7 days

mdoc(7) police: removed HISTORY info from the .Os call.

mdoc(7) police: normalize .Nd.

mdoc(7) police: add a missing comma in the SEE ALSO.

Added burncd to the SEE ALSO section.

Idea by: "Akinori MUSHA" <knu@iDaemons.org>

mdoc(7) police: apply formatting fixes to rev 1.14.

Remove the ATA_ENABLE_ATAPI_DMA, ATA_ENABLE_WC and ATA_ENABLE_TAGS
options, add the tuneables for this purpose.

Update woith latest chipsets and options

mdoc(7) police: removed history info from the .Os FreeBSD call.

mdoc(7) police: do not split author names in the AUTHORS section.

Spell the sos's name correctly.

Add the ATA_ENABLE_TAGS option

Update with all the new chipsets..

- link ata.4 to {acd,ad,afd,ast}.4
- add the reference to ad.4 in da.4.

MFC candidate.

Submitted by: sheldonh, mpp

Fix alphabetical ordering of supported ATA-chipsets.

Explain static numbering.

Reviewed by: asmodai

Minor style fixes: freebsd.org -> FreeBSD.org

Update man page to match the driver.

Remove the i386 bit from the manpage which was left there due
to my misunderstanding.

Fix misunderstanding that ata(4) is i386 only. Since this file has
no history, it does not warrant repo action.