#
359722 |
|
08-Apr-2020 |
freqlabs |
MFC r359303
MFOpenZFS: ZVOLs should not be allowed to have children
zfs create, receive and rename can bypass this hierarchy rule. Update both userland and kernel module to prevent this issue and use pyzfs unit tests to exercise the ioctls directly.
Note: this commit slightly changes zfs_ioc_create() ABI. This allow to differentiate a generic error (EINVAL) from the specific case where we tried to create a dataset below a ZVOL (ZFS_ERR_WRONG_PARENT).
Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Approved by: mav (mentor) openzfs/zfs@d8d418ff0cc90776182534bce10b01e9487b63e4
|
#
342941 |
|
11-Jan-2019 |
avg |
MFC r342541: MFV r342532: 5882 Temporary pool names
Note that this commit brings only formatting changes that were done during the final review of the illumos change, because FreeBSD got the main changes before illumos.
|
#
339142 |
|
03-Oct-2018 |
mav |
MFC r337215: MFV 337214: 9621 Make createtxg and guid properties public
illumos/illumos-gate@e8d4a73c868afb740396041be80ed2b141065e76
Reviewed by: Andy Stormont <astormont@racktopsystems.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Yuri Pankov <yuripv@yuripv.net> Approved by: Robert Mustacchi <rm@joyent.com> Author: Josh Paetzel <josh@tcbug.org>
|
#
339111 |
|
03-Oct-2018 |
mav |
MFC r337007: MFV r336991, r337001: 9102 zfs should be able to initialize storage devices
The first access to a disk block can incur a performance penalty on some platforms (e.g. AWS's EBS, VMware VMDKs). Therefore it is recommended that volumes be "thick provisioned", where supported by the platform (VMware). Thick provisioning is time consuming and often is ignored. If the thick provision step is omitted, customers will see suboptimal performance until we have written to all parts of the LUN. ZFS should be able to initialize any unused storage to remove any first-write penalty that exists.
illumos/illumos-gate@094e47e980b0796b94b1b8f51f462a64d246e516
Reviewed by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Approved by: Richard Lowe <richlowe@richlowe.net> Author: George Wilson <george.wilson@delphix.com>
|
#
339034 |
|
01-Oct-2018 |
sef |
MFC r334844, r336180, r336458
r334844
This originated from ZFS On Linux, as https://github.com/zfsonlinux/zfs/commit/d4a72f23863382bdf6d0ae33196f5b5decbc48fd
During scans (scrubs or resilvers), it sorts the blocks in each transaction group by block offset; the result can be a significant improvement. (On my test system just now, which I put some effort to introduce fragmentation into the pool since I set it up yesterday, a scrub went from 1h2m to 33.5m with the changes.) I've seen similar rations on production systems.
r336180
Fix up some missed and mis-merges from the sequential scan code (r334844). Most of the changes involve moving some code around to reduce conflicts with future merges. One of the missing changes included a notification on scrub cancellation.
r336458
Fix a couple of typos in r334844 noticed by Richard Kojedzinszky
Approved by: mav Sponsored by: iXsystems, Inc
|
#
333194 |
|
03-May-2018 |
avg |
MFC r332426: allow ZFS pool to have temporary name for duration of current import
The change adds -t <name> option to zpool create and -t option to zpool import in its form with an old name and a new name. This allows to import (or create) a pool under a name that's different from its real, permanent name without affecting that name. This is useful when working with VM images or images of other physical systems if they happen to have a ZFS pool with the same name as the host system.
Sponsored by: Panzura (porting)
|
#
332550 |
|
16-Apr-2018 |
mav |
MFC r331707: MFV r331706: 9235 rename zpool_rewind_policy_t to zpool_load_policy_t
illumos/illumos-gate@5dafeea3ebd2dd77affc802bcb90f63faf01589f
We want to be able to pass various settings during import/open of a pool, which are not only related to rewind. Instead of adding a new policy and duplicate a bunch of code, we should just rename rewind_policy to a more generic term like load_policy.
For instance, we'd like to set spa->spa_import_flags from the nvlist, rather from a flags parameter passed to spa_import as in some cases we want those flags not only for the import case, but also for the open case. One such flag could be ZFS_IMPORT_MISSING_LOG (as used in zdb) which would allow zfs to open a pool when logs are missing.
Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Author: Pavel Zakharov <pavel.zakharov@delphix.com>
|
#
332547 |
|
16-Apr-2018 |
mav |
MFC r331701: MFV r331695, 331700: 9166 zfs storage pool checkpoint
illumos/illumos-gate@8671400134a11c848244896ca51a7db4d0f69da4
The idea of Storage Pool Checkpoint (aka zpool checkpoint) deals with exactly that. It can be thought of as a “pool-wide snapshot” (or a variation of extreme rewind that doesn’t corrupt your data). It remembers the entire state of the pool at the point that it was taken and the user can revert back to it later or discard it. Its generic use case is an administrator that is about to perform a set of destructive actions to ZFS as part of a critical procedure. She takes a checkpoint of the pool before performing the actions, then rewinds back to it if one of them fails or puts the pool into an unexpected state. Otherwise, she discards it. With the assumption that no one else is making modifications to ZFS, she basically wraps all these actions into a “high-level transaction”.
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Approved by: Richard Lowe <richlowe@richlowe.net> Author: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
|
#
332536 |
|
16-Apr-2018 |
mav |
MFC r329798: MFV r329793, r329795: 9075 Improve ZFS pool import/load process and corrupted pool recovery
illumos/illumos-gate@6f7938128a2c5e23f4b970ea101137eadd1470a1
Some work has been done lately to improve the debugability of the ZFS pool load (and import) process. This includes:
https://www.illumos.org/issues/7638: Refactor spa_load_impl into several functions https://www.illumos.org/issues/8961: SPA load/import should tell us why it failed https://www.illumos.org/issues/7277: zdb should be able to print zfs_dbgmsg's
To iterate on top of that, there's a few changes that were made to make the import process more resilient and crash free. One of the first tasks during the pool load process is to parse a config provided from userland that describes what devices the pool is composed of. A vdev tree is generated from that config, and then all the vdevs are opened.
The Meta Object Set (MOS) of the pool is accessed, and several metadata objects that are necessary to load the pool are read. The exact configuration of the pool is also stored inside the MOS. Since the configuration provided from userland is external and might not accurately describe the vdev tree of the pool at the txg that is being loaded, it cannot be relied upon to safely operate the pool. For that reason, the configuration in the MOS is read early on. In the past, the two configurations were compared together and if there was a mismatch then the load process was aborted and an error was returned.
The latter was a good way to ensure a pool does not get corrupted, however it made the pool load process needlessly fragile in cases where the vdev configuration changed or the userland configuration was outdated. Since the MOS is stored in 3 copies, the configuration provided by userland doesn't have to be perfect in order to read its contents. Hence, a new approach has been adopted: The pool is first opened with the untrusted userland configuration just so that the real configuration can be read from the MOS. The trusted MOS configuration is then used to generate a new vdev tree and the pool is re-opened.
When the pool is opened with an untrusted configuration, writes are disabled to avoid accidentally damaging it. During reads, some sanity checks are performed on block pointers to see if each DVA points to a known vdev; when the configuration is untrusted, instead of panicking the system if those checks fail we simply avoid issuing reads to the invalid DVAs.
This new two-step pool load process now allows rewinding pools accross vdev tree changes such as device replacement, addition, etc. Loading a pool from an external config file in a clustering environment also becomes much safer now since the pool will import even if the config is outdated and didn't, for instance, register a recent device addition.
With this code in place, it became relatively easy to implement a long-sought-after feature: the ability to import a pool with missing top level (i.e. non-redundant) devices. Note that since this almost guarantees some loss Of data, this feature is for now restricted to a read-only import.
Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Andrew Stormont <andyjstormont@gmail.com> Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org> Author: Pavel Zakharov <pavel.zakharov@delphix.com>
|
#
332525 |
|
16-Apr-2018 |
mav |
MFC r329732: MFV r329502: 7614 zfs device evacuation/removal
illumos/illumos-gate@5cabbc6b49070407fb9610cfe73d4c0e0dea3e77
https://www.illumos.org/issues/7614: This project allows top-level vdevs to be removed from the storage pool with “zpool remove”, reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now “indirect”) vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev.
The size of the in-memory mapping table will be reduced when its entries become “obsolete” because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been “remapped” in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be “remapped” to their new (concrete) locations if possible. This process can be accelerated by using the “zfs remap” command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs.
Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. Therefore, mirror and raidz devices can not be removed.
Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Approved by: Garrett D'Amore <garrett@damore.org> Author: Prashanth Sreenivasa <pks@delphix.com>
|
#
331397 |
|
23-Mar-2018 |
mav |
MFC r329690: MFV r319737: 6939 add sysevents to zfs core for commands
illumos/illumos-gate@ce1577b04976f1d8bb5f235b6eaaab15b46a3068 https://github.com/illumos/illumos-gate/commit/ce1577b04976f1d8bb5f235b6eaaab15b46a3068
https://www.illumos.org/issues/6939 Originally created https://smartos.org/bugview/OS-4489 sysevents should be fired in the kernel from ZFS whenever a command is run that is logged in zpool history. Example output Terminal 1 root - gz sunos ~ # zfs create zones/foobar root - gz sunos ~ # zfs set quota=10g zones/foobar root - gz sunos ~ # zfs destroy zones/foobar Terminal 2 root - gz sunos ~ # sysevent EC_zfs nvlist version: 0 date = 2016-04-28T14:50:08.964Z vendor = SUNW publisher = zfs class = EC_zfs subclass = ESC_ZFS_history_event pid = 0 data = (embedded nvlist) nvlist version: 0 pool_name = zones pool_guid = 0x40c964e8f9a7a694 history_record = (embedded nvlist) nvlist version: 0 dsname = zones/foobar dsid = 0x1525 history internal str = internal_name = create history txg = 0x4c4ef3
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com> Reviewed by: Joshua M. Clulow <jmc@joyent.com> Reviewed by: Josh Wilsdon <jwilsdon@joyent.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Alan Somers <asomers@gmail.com> Reviewed by: Andrew Stormont <andyjstormont@gmail.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Author: Dave Eddy <dave@daveeddy.com>
|
#
331395 |
|
22-Mar-2018 |
mav |
MFC r329681: MFV r318941: 7446 zpool create should support efi system partition
illumos/illumos-gate@7855d95b30fd903e3918bad5a29b777e765db821 https://github.com/illumos/illumos-gate/commit/7855d95b30fd903e3918bad5a29b777e765db821
https://www.illumos.org/issues/7446 Since we support whole-disk configuration for boot pool, we also will need whole disk support with UEFI boot and for this, zpool create should create efi- system partition. I have borrowed the idea from oracle solaris, and introducing zpool create - B switch to provide an way to specify that boot partition should be created. However, there is still an question, how big should the system partition be. For time being, I have set default size 256MB (thats minimum size for FAT32 with 4k blocks). To support custom size, the set on creation "bootsize" property is created and so the custom size can be set as: zpool create B - o bootsize=34MB rpool c0t0d0 After pool is created, the "bootsize" property is read only. When -B switch is not used, the bootsize defaults to 0 and is shown in zpool get output with value ''. Older zfs/zpool implementations are ignoring this property. https://www.illumos.org/rb/r/219/
Reviewed by: Andrew Stormont <andyjstormont@gmail.com> Reviewed by: Yuri Pankov <yuri.pankov@gmail.com> Approved by: Dan McDonald <danmcd@kebe.com> Author: Toomas Soome <tsoome@me.com>
This commit makes no sense for FreeBSD, that is why I blocked the option, but it should be good to stay closer to upstream.
|
#
329493 |
|
18-Feb-2018 |
mav |
MFC r328252: MFV r328251: 8652 Tautological comparisons with ZPROP_INVAL
illumos/illumos-gate@4ae5f5f06c6c2d1db8167480f7d9e3b5378ba2f2
https://www.illumos.org/issues/8652: Clang and GCC prefer to use unsigned ints to store enums. With Clang, that causes tautological comparison warnings when comparing a zfs_prop_t or zpool_prop_t variable to the macro ZPROP_INVAL. It's likely that error handling code is being silently removed as a result.
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Igor Kozhukhov <igor@dilos.org> Approved by: Gordon Ross <gwr@nexenta.com> Author: Alan Somers <asomers@gmail.com>
|
#
329484 |
|
18-Feb-2018 |
mav |
MFC r328224: MFV r328220: 8677 Open-Context Channel Programs
illumos/illumos-gate@a3b2868063897ff0083dea538f55f9873eec981f
https://www.illumos.org/issues/8677 We want to be able to run channel programs outside of synching context. This would greatly improve performance of channel program that just gather information, as we won't have to wait for synching context anymore.
This feature should introduce the following: - A new command line flag in "zfs program" to specify our intention to run in open context. - A new flag/option within the channel program ioctl which selects the context. - Appropriate error handling whenever we try a channel program in open-context that contains zfs.sync* expressions. - Documentation for the new feature in the manual pages.
Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Chris Williamson <chris.williamson@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Author: Serapheim Dimitropoulos <serapheim@delphix.com>
|
#
325534 |
|
08-Nov-2017 |
avg |
MFC r324163: MFV r323530,r323533,r323534: 7431 ZFS Channel Programs, and followups
Also MFC-ed are the following fixes: - r324164 Add several new files to the files enabled by ZFS kernel option - r324178 unbreak kernel builds on sparc64 and powerpc - r324194 fix incorrect use of getzfsvfs_impl in r324163 - r324292 really unbreak kernel builds on sparc64 and powerpc64
|
#
324010 |
|
26-Sep-2017 |
avg |
MFC r323355: MFV r323107: 8414 Implemented zpool scrub pause/resume
illumos/illumos-gate@1702cce751c5cb7ead878d0205a6c90b027e3de8 https://github.com/illumos/illumos-gate/commit/1702cce751c5cb7ead878d0205a6c90b027e3de8
FreeBSD note: rather than merging the zpool.8 update I copied the zpool scrub section from the illumos zpool.1m to FreeBSD zpool.8 almost verbatim. Now that the illumos page uses the mdoc format, it was an easier option. Perhaps the change is not in perfect compliance with the FreeBSD style, but I think that it is acceptible.
https://www.illumos.org/issues/8414 This issue tracks the port of scrub pause from ZoL: https://github.com/zfsonlinux/zfs/pull/6167 Currently, there is no way to pause a scrub. Pausing may be useful when the pool is busy with other I/O to preserve bandwidth.
Description
This patch adds the ability to pause and resume scrubbing. This is achieved by maintaining a persistent on-disk scrub state. While the state is 'paused' we do not scrub any more blocks. We do however perform regular scan housekeeping such as freeing async destroyed and deadlist blocks while paused.
Motivation and Context
Scrub pausing can be an I/O intensive operation and people have been asking for the ability to pause a scrub for a while. This allows one to preserve scrub progress while freeing up bandwidth for other I/O.
Reviewed by: George Melikov <mail@gmelikov.ru> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Approved by: Dan McDonald <danmcd@joyent.com> Author: Alek Pinchuk <apinchuk@datto.com>
|
#
308914 |
|
21-Nov-2016 |
avg |
MFC r308089: zfsbootcfg: a simple tool to set next boot (one time) options for zfsboot
|
#
307277 |
|
14-Oct-2016 |
mav |
MFC r305331: MFV r304155: 7090 zfs should improve allocation order and throttle allocations
illumos/illumos-gate@0f7643c7376dd69a08acbfc9d1d7d548b10c846a https://github.com/illumos/illumos-gate/commit/0f7643c7376dd69a08acbfc9d1d7d548b 10c846a
https://www.illumos.org/issues/7090 When write I/Os are issued, they are issued in block order but the ZIO pipelin e will drive them asynchronously through the allocation stage which can result i n blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able t o detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocatio n is successfully completed it's scheduled on a given top-level vdev. Each top- level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied.
Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Author: George Wilson <george.wilson@delphix.com>
|
#
307112 |
|
11-Oct-2016 |
mav |
MFC r305222: MFV r302993: 7104 increase indirect block size
illumos/illumos-gate@4b5c8e93cab28d3c65ba9d407fd8f46e3be1db1c https://github.com/illumos/illumos-gate/commit/4b5c8e93cab28d3c65ba9d407fd8f46e3 be1db1c
https://www.illumos.org/issues/7104 The current default indirect block size is 16KB. We can improve performance by increasing it to 128KB. This is especially helpful for any workload that needs to read most of the metadata, e.g. scrub/resilver, file deletion, filesystem deletion, and zfs send. We also need to fix a few space estimation errors to make the tests pass.
Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Dan McDonald <danmcd@omniti.com> Approved by: Robert Mustacchi <rm@joyent.com> Author: Matthew Ahrens <mahrens@delphix.com>
|
#
307108 |
|
11-Oct-2016 |
mav |
MFC r305209: MFV r302660: 6314 buffer overflow in dsl_dataset_name
illumos/illumos-gate@9adfa60d484ce2435f5af77cc99dcd4e692b6660 https://github.com/illumos/illumos-gate/commit/9adfa60d484ce2435f5af77cc99dcd4e6 92b6660
https://www.illumos.org/issues/6314 Callers of dsl_dataset_name pass a buffer of size ZFS_MAXNAMELEN, but dsl_dataset_name copies the datasets' name PLUS the snapshot name to it, resulting in a max of 2 * ZFS_MAXNAMELEN + '@'.
Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com> Approved by: Dan McDonald <danmcd@omniti.com> Author: Matthew Ahrens <mahrens@delphix.com>
|
#
302408 |
|
07-Jul-2016 |
gjb |
Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle. Prune svn:mergeinfo from the new branch, as nothing has been merged here.
Additional commits post-branch will follow.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
299441 |
|
11-May-2016 |
mav |
MFV r299440: 6736 ZFS per-vdev ZAPs
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Don Brady <don.brady@intel.com> Reviewed by: Dan McDonald <danmcd@omniti.com> Approved by: Richard Lowe <richlowe@richlowe.net> Author: Joe Stein <joe.stein@delphix.com>
openzfs/openzfs@215198a6ad15cf4832370e2f19247abeb36b951a
|
#
298472 |
|
22-Apr-2016 |
avg |
MFV r298471: 6052 decouple lzc_create() from the implementation details
illumos/illumos-gate@26455f9efcf9b1e44937d4d86d1ce37b006f25a9 https://github.com/illumos/illumos-gate/commit/26455f9efcf9b1e44937d4d86d1ce37b006f25a9
https://www.illumos.org/issues/6052 At the moment type parameter of lzc_create() is of dmu_objset_type_t type. That exposes an implementation detail and requires sys/fs/zfs.h to be included in libzfs_core.h creating unnecessary coupling between libzfs_core interface and ZFS internals. I think that dmu_objset_type_t should be replaced with a libzfs_core enumeration of supported dataset types. For ABI reasons the new enumeration could be bit-compatible with dmu_objset_type_t. For example: typedef enum { LZC_DST_ZFS = 2, LZC_DST_ZVOL } lzc_dataset_type_t;
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Approved by: Richard Lowe <richlowe@richlowe.net> Author: Andriy Gapon <andriy.gapon@clusterhq.com>
MFC after: 2 weeks Sponsored by: ClusterHQ
|
#
297763 |
|
09-Apr-2016 |
mav |
MFV r297760: 6418 zpool should have a label clearing command
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Author: Will Andrews <will@firepipe.net>
Closes #83 Closes #32
openzfs/openzfs@9663688425131744221ea99f9e66b9ed964492ae
FreeBSD already had `zpool labelclear` functionality, so this is mostly just a diff reduction.
MFC after: 1 month
|
#
296519 |
|
08-Mar-2016 |
mav |
MFV r296518: 5027 zfs large block support (add copyright)
Author: Matthew Ahrens <matt@mahrens.org>
illumos/illumos-gate@c3d26abc9ee97b4f60233556aadeb57e0bd30bb9
|
#
289362 |
|
15-Oct-2015 |
mav |
MFV r289312: 2605 want to resume interrupted zfs send
Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@9c3fd1216fa7fb02cfbc78a2518a686d54b48ab8
For more info, see: - slides http://www.slideshare.net/MatthewAhrens/openzfs-send-and-receive - video https://www.youtube.com/watch?v=iY44jPMvxog - manpage changes (for zfs resume -s and zfs send -t) - upcoming talk at the OpenZFS Developer Summit
The TL;DR is: Use "zfs receive -s" to save the partially received state on failure. On failure, get the receive token with "zfs get receive_resume_token <fs>" Resume the send with "zfs send -t <token_value>"
Relnotes: yes
|
#
274337 |
|
10-Nov-2014 |
delphij |
MFV r274273:
ZFS large block support.
Please note that booting from datasets that have recordsize greater than 128KB is not supported (but it's Okay to enable the feature on the pool). This *may* remain unchanged because of memory constraint.
Limited safety belt is provided for mounted root filesystem but use caution is advised.
Illumos issue: 5027 zfs large block support
MFC after: 1 month
|
#
269118 |
|
26-Jul-2014 |
delphij |
MFV r269010:
Import Illumos changes to address the following Illumos issues: 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4984 device selection should use fragmentation metric
MFC after: 2 weeks
|
#
268128 |
|
01-Jul-2014 |
delphij |
MFV r268122:
4929 want prevsnap property
illumos/illumos-gate@b461c7460e5e77cf65f00151162e654220c6e2fb
MFC after: 2 weeks
|
#
268079 |
|
01-Jul-2014 |
delphij |
MFV r267566:
4390 i/o errors when deleting filesystem/zvol can lead to space map corruption
MFC after: 2 weeks
|
#
266771 |
|
27-May-2014 |
delphij |
MFV r266766:
Add a new zfs property, "redundant_metadata" which can have values "all" or "most". The default will be "all", which is the current behavior. When set to all, ZFS stores an extra copy of all metadata. If a single on-disk block is corrupt, at worst a single block of user data (which is recordsize bytes long) can be lost.
Setting to "most" will cause us to only store 1 copy of level-1 indirect blocks of user data files. This can improve performance of random writes, because less metadata has to be written. In practice, at worst about 100 blocks (of recordsize bytes each) of user data can be lost if a single on-disk block is corrupt.
The exact behavior of which metadata blocks are stored redundantly may change in future releases.
Illumos issue: 3835 zfs need not store 2 copies of all metadata
MFC after: 2 weeks
|
#
264835 |
|
23-Apr-2014 |
delphij |
MFV r264829:
3897 zfs filesystem and snapshot limits
MFC after: 2 weeks
|
#
264145 |
|
05-Apr-2014 |
mav |
Add property and sysctl to control how ZVOLs are exposed to OS.
New ZFS property volmode and sysctl vfs.zfs.vol.mode allow switching ZVOL between three modes: geom -- existing fully functional behavior (default); dev -- exposing volumes only as raw disk device file in devfs; none -- not exposing volumes outside ZFS.
The "dev" mode is less functional (can't be partitioned, mounted, etc), but it is faster, and in some scenarios with untrusted consumers safer. It can be useful for NAS, VM block storages, etc. The "none" mode may be convenient for backup servers, etc. that don't need direct data access.
Due to the way ZVOL is integrated with main ZFS code, those property and sysctl are checked only during pool import and volume creation.
MFC after: 1 month Sponsored by: iXsystems, Inc.
|
#
260183 |
|
02-Jan-2014 |
delphij |
MFV r260154 + 260182:
4369 implement zfs bookmarks 4368 zfs send filesystems from readonly pools
Illumos/illumos-gate@78f171005391b928aaf1642b3206c534ed644332
MFC after: 2 weeks
|
#
254591 |
|
21-Aug-2013 |
gibbs |
Enhance the ZFS vdev layer to maintain both a logical and a physical minimum allocation size for devices. Use this information to automatically increase ZFS's minimum allocation size for new top-level vdevs to a value that more closely matches the optimum device allocation size.
Use GEOM's stripesize attribute, if set, as the physical sector size of the GEOM.
Calculate the minimum blocksize of each metaslab class. Use the calculated value instead of SPA_MINBLOCKSIZE (512b) when determining the likelyhood of compression yeilding a reduction in physical space usage.
Report devices with sub-optimal block size configuration in "zpool status". Also properly fail attempts to attach devices with a logical block size greater than 8kB, since this will cause corruption to ZFS's label area.
Sponsored by: Spectra Logic Corporaion MFC after: 2 weeks
Background ========== Many modern devices use physical allocation units that are much larger than the minimum logical allocation size accessible by external commands. Two prevalent examples of this are 512e disk drives (512b logical sector, 4K physical sector) and flash devices (512b logical sector, 4K or larger allocation block size, and 128k or larger erase block size). Operations that modify less than the physical sector size result in a costly read-modify-write or garbage collection sequence on these devices.
Simply exporting the true physical sector of the device to ZFS would yield optimal performance, but has two serious drawbacks:
1) Existing pools created with devices that have different logical and physical block sizes, but were configured to use the logical block size (e.g. because the OS version used for pool construction reported the logical block size instead of the physical block size) will suddenly find that the vdev allocation size has increased. This can be easily tolerated for active members of the array, but ZFS would prevent replacement of a vdev with another identical device because it now appears that the smaller allocation size required by the pool is not supported by the new device.
2) The device's physical block size may be too large to be supported by ZFS. The optimal allocation size for the vdev may be quite large. For example, a RAID controller may export a vdev that requires read-modify-write cycles unless accessed using 64k aligned/sized requests. ZFS currently has an 8k minimum block size limit.
Reporting both the logical and physical allocation sizes for vdevs solves these problems. A device may be used so long as the logical block size is compatible with the configuration. By comparing the logical and physical block sizes, new configurations can be optimized and administrators can be notified of any existing pools that are sub-optimal.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/spa.h: Add the SPA_ASHIFT constant. ZFS currently has a hard upper limit of 13 (8k) for ashift and this constant is used to both document and enforce this limit.
sys/cddl/contrib/opensolaris/uts/common/sys/fs/zfs.h: Add the VDEV_AUX_ASHIFT_TOO_BIG error code.
Add fields for exporting the configured, logical, and physical ashift to the vdev_stat_t structure.
Add VDEV_STAT_VALID() macro which can be used to verify the presence of required vdev_stat_t fields in nvlist data.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c: Provide a SYSCTL_PROC handler for "max_auto_ashift". Since the limit is only referenced long after boot when a create operation occurs, there's no compelling need for it to be a boot time configurable tunable. This also allows the validation code for the max_auto_ashift value to be contained within the sysctl handler.
Populate the new fields in the vdev_stat_t structure.
Fail vdev opens if the vdev reports an ashift larger than SPA_MAXASHIFT.
Propogate vdev_logical_ashift and vdev_physical_ashift between child and parent vdevs as is done for vdev_ashift.
In vdev_open(), restore code that fails opens for devices where vdev_ashift grows. This can only happen now if the device's logical ashift grows, which means it really isn't safe to use the device.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/vdev_impl.h: sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c: sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_file.c: sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c: sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_mirror.c: sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_missing.c: sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_raidz.c: sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_root.c: Update the vdev_open() API so that both logical (what was just ashift before) and physical ashift are reported.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/vdev_impl.h: Add two new fields, vdev_physical_ashift and vdev_logical_ashift, to vdev_t.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c: sys/cddl/contrib/opensolaris/uts/common/fs/zfs/spa_config.c: sys/cddl/contrib/opensolaris/uts/common/fs/zfs/spa.c: Add vdev_ashift_optimize(). Call it anytime a new top-level vdev is allocated.
cddl/contrib/opensolaris/cmd/zpool/zpool_main.c: Add text for the VDEV_AUX_ASHIFT_TOO_BIG error.
For each sub-optimally configured leaf vdev, report configured and native block sizes.
cddl/contrib/opensolaris/cmd/zpool/zpool_main.c: cddl/contrib/opensolaris/lib/libzfs/common/libzfs.h: cddl/contrib/opensolaris/lib/libzfs/common/libzfs_status.c: Introduce a new zpool status: ZPOOL_STATUS_NON_NATIVE_ASHIFT. This status is reported on healthy pools containing vdevs configured to use a block size smaller than their reported physical block size.
cddl/contrib/opensolaris/lib/libzfs/common/libzfs_status.c: Update find_vdev_problem() and supporting functions to provide the full vdev_stat_t structure to problem checking routines, and to allow decent into replacing vdevs.
Add a vdev_non_native_ashift() validator which is used on the full vdev tree to check for ZPOOL_STATUS_NON_NATIVE_ASHIFT.
cddl/contrib/opensolaris/lib/libzpool/common/kernel.c: cddl/contrib/opensolaris/lib/libzpool/common/sys/zfs_context.h: Enhance sysctl userland stubs now that a SYSCTL_PROC handler is used in vdev.c.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/metaslab.c: sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/metaslab_impl.h: When the group membership of a metaslab class changes (i.e. when a vdev is added or removed from a pool), walk the group list to determine the smallest block size currently available and record this in the metaslab class.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/metaslab.h: sys/cddl/contrib/opensolaris/uts/common/fs/zfs/metaslab.c: Add the metaslab_class_get_minblocksize() accessor.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zio_compress.h: sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zio_compress.c: sys/cddl/contrib/opensolaris/uts/common/fs/zfs/arc.c: In zio_compress_data(), take the minimum blocksize as an input parameter instead of assuming SPA_MINBLOCKSIZE.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/arc.c: In l2arc_compress_buf(), pass SPA_MINBLOCKSIZE as the minimum blocksize of the device. The l2arc code performs has it's own code for deciding if compression is worth while, so this effectively disables zio_compress_data() from second guessing the original decision.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zio.c: In zio_write_bp_init(), use the minimum blocksize of the normal metaslab class when compressing data.
|
#
254112 |
|
08-Aug-2013 |
delphij |
MFV r254079:
Illumos ZFS issues: 3957 ztest should update the cachefile before killing itself 3958 multiple scans can lead to partial resilvering 3959 ddt entries are not always resilvered 3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth 3961 freed gang blocks are not resilvered and can cause pool to suspend 3962 ztest should print out zfs debug buffer before exiting
|
#
253819 |
|
30-Jul-2013 |
delphij |
MFV r253781 + r253871:
Illumos ZFS issues: 3894 zfs should not allow snapshot of inconsistent dataset
MFC after: 2 weeks
|
#
248571 |
|
21-Mar-2013 |
mm |
Merge libzfs_core branch: includes MFV 238590, 238592, 247580
MFV 238590, 238592: In the first zfs ioctl restructuring phase, the libzfs_core library was introduced. It is a new thin library that wraps around kernel ioctl's. The idea is to provide a forward-compatible way of dealing with new features. Arguments are passed in nvlists and not random zfs_cmd fields, new-style ioctls are logged to pool history using a new method of history logging.
http://blog.delphix.com/matt/2012/01/17/the-future-of-libzfs/
MFV 247580 [1]: To address issues of several deadlocks and race conditions the locking code around dsl_dataset was rewritten and the interface to synctasks was changed.
User-Visible Changes: "zfs snapshot" can create more arbitrary snapshots at once (atomically) "zfs destroy" destroys multiple snapshots at once "zfs recv" has improved performance
Backward Compatibility: I have extended the compatibility layer to support full backward compatibility by remapping or rewriting the responsible ioctl arguments. Old utilities are fully supported by the new kernel module.
Forward Compatibility: New utilities work with old kernels with the following restrictions: - creating, destroying, holding and releasing of multiple snapshots at once is not supported, this includes recursive (-r) commands
Illumos ZFS issues: 2882 implement libzfs_core 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once 3464 zfs synctask code needs restructuring
References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2900 https://www.illumos.org/issues/3464 [1]
MFC after: 1 month Sponsored by: Hybrid Logic Inc. [1]
|
#
247585 |
|
01-Mar-2013 |
mm |
MFV r247316: Merge new read-only zfs properties from vendor (illumos)
Illumos ZFS issues: 3588 provide zfs properties for logical (uncompressed) space used and referenced
References: https://www.illumos.org/issues/3588
MFC after: 2 weeks
|
#
238926 |
|
30-Jul-2012 |
mm |
Partial MFV (illumos-gate 13753:2aba784c276b) 2762 zpool command should have better support for feature flags
References: https://www.illumos.org/issues/2762
MFC after: 2 weeks
|
#
236884 |
|
11-Jun-2012 |
mm |
Introduce "feature flags" for ZFS pools (bump SPA version to 5000). Add first feature "com.delphix:async_destroy" (asynchronous destroy of ZFS datasets). Implement features support in ZFS boot code.
Illumos revisions merged: 13700:2889e2596bd6 13701:1949b688d5fb 2619 asynchronous destruction of ZFS file systems 2747 SPA versioning with zfs feature flags
References: https://www.illumos.org/issues/2619 https://www.illumos.org/issues/2747
Obtained from: illumos (issue #2619, #2747) MFC after: 1 month
|
#
236155 |
|
27-May-2012 |
mm |
Import illumos changeset 13570:3411fd5f1589 1948 zpool list should show more detailed pool information
Display per-vdev information with "zpool list -v". The added expandsize property has currently no value on FreeBSD. This changeset allows adding expansion support to individual vdevs in the future.
References: https://www.illumos.org/issues/1948
Obtained from: illumos (issue #1948) MFC after: 2 weeks
|
#
235222 |
|
10-May-2012 |
mm |
Import illumos changeset 13686:4bc0783f6064 2703 add mechanism to report ZFS send progress
If the zfs send command is used with the -v flag, the amount of bytes transmitted is reported in per second updates.
References: https://www.illumos.org/issues/2703
Obtained from: illumos (issue #2703) MFC after: 2 weeks
|
#
228103 |
|
28-Nov-2011 |
mm |
Merge new ZFS features from illumos:
1644 add ZFS "clones" property https://www.illumos.org/issues/1644
1645 add ZFS "written" and "written@..." properties https://www.illumos.org/issues/1645
1646 "zfs send" should estimate size of stream https://www.illumos.org/issues/1646
1647 "zfs destroy" should determine space reclaimed by destroying multiple snapshots https://www.illumos.org/issues/1647
1693 persistent 'comment' field for a zpool https://www.illumos.org/issues/1693
1708 adjust size of zpool history data https://www.illumos.org/issues/1708
1748 desire support for reguid in zfs https://www.illumos.org/issues/1748
Obtained from: illumos (changesets 13514, 13524, 13525) MFC after: 1 month
|
#
224174 |
|
18-Jul-2011 |
mm |
Resurrect the ZFS "aclmode" property Change default of "aclmode" to "discard".
Illumos-gate changeset: 13370:8c04143bd318
Obtained from: Illumos (Feature #742) MFC after: 2 weeks
|
#
223623 |
|
28-Jun-2011 |
mm |
Add a new "REFCOMPRESSRATIO" property.
For snapshots, this is the same as COMPRESSRATIO, but for filesystems/volumes, the COMPRESSRATIO is based on the data "USED" (ie, includes blocks in children, but not blocks shared with the origin).
This is needed to figure out how much space a filesystem would use if it were not compressed (ignoring snapshots).
Illumos-gate revision: 13387
Obtained from: Illumos (Feature #1092) MFC after: 2 weeks
|
#
219089 |
|
27-Feb-2011 |
pjd |
Finally... Import the latest open-source ZFS version - (SPA) 28.
Few new things available from now on:
- Data deduplication. - Triple parity RAIDZ (RAIDZ3). - zfs diff. - zpool split. - Snapshot holds. - zpool import -F. Allows to rewind corrupted pool to earlier transaction group. - Possibility to import pool in read-only mode.
MFC after: 1 month
|
#
209962 |
|
12-Jul-2010 |
mm |
Merge ZFS version 15 and almost all OpenSolaris bugfixes referenced in Solaris 10 updates 141445-09 and 142901-14.
Detailed information: (OpenSolaris revisions and Bug IDs, Solaris 10 patch numbers)
7844:effed23820ae 6755435 zfs_open() and zfs_close() needs to use ZFS_ENTER/ZFS_VERIFY_ZP (141445-01)
7897:e520d8258820 6748436 inconsistent zpool.cache in boot_archive could panic a zfs root filesystem upon boot-up (141445-01)
7965:b795da521357 6740164 zpool attach can create an illegal root pool (141909-02)
8084:b811cc60d650 6769612 zpool_import() will continue to write to cachefile even if altroot is set (N/A)
8121:7fd09d4ebd9c 6757430 want an option for zdb to disable space map loading and leak tracking (141445-01)
8129:e4f45a0bfbb0 6542860 ASSERT: reason != VDEV_LABEL_REMOVE||vdev_inuse(vd, crtxg, reason, 0) (141445-01)
8188:fd00c0a81e80 6761100 want zdb option to select older uberblocks (141445-01)
8190:6eeea43ced42 6774886 zfs_setattr() won't allow ndmp to restore SUNWattr_rw (141445-01)
8225:59a9961c2aeb 6737463 panic while trying to write out config file if root pool import fails (141445-01)
8227:f7d7be9b1f56 6765294 Refactor replay (141445-01)
8228:51e9ca9ee3a5 6572357 libzfs should do more to avoid mnttab lookups (141909-01) 6572376 zfs_iter_filesystems and zfs_iter_snapshots get objset stats twice (141909-01)
8241:5a60f16123ba 6328632 zpool offline is a bit too conservative (141445-01) 6739487 ASSERT: txg <= spa_final_txg due to scrub/export race (141445-01) 6767129 ASSERT: cvd->vdev_isspare, in spa_vdev_detach() (141445-01) 6747698 checksum failures after offline -t / export / import / scrub (141445-01) 6745863 ZFS writes to disk after it has been offlined (141445-01) 6722540 50% slowdown on scrub/resilver with certain vdev configurations (141445-01) 6759999 resilver logic rewrites ditto blocks on both source and destination (141445-01) 6758107 I/O should never suspend during spa_load() (141445-01) 6776548 codereview(1) runs off the page when faced with multi-line comments (N/A) 6761406 AMD errata 91 workaround doesn't work on 64-bit systems (141445-01)
8242:e46e4b2f0a03 6770866 GRUB/ZFS should require physical path or devid, but not both (141445-01)
8269:03a7e9050cfd 6674216 "zfs share" doesn't work, but "zfs set sharenfs=on" does (141445-01) 6621164 $SRC/cmd/zfs/zfs_main.c seems to have a syntax error in the translation note (141445-01) 6635482 i18n problems in libzfs_dataset.c and zfs_main.c (141445-01) 6595194 "zfs get" VALUE column is as wide as NAME (141445-01) 6722991 vdev_disk.c: error checking for ddi_pathname_to_dev_t() must test for NODEV (141445-01) 6396518 ASSERT strings shouldn't be pre-processed (141445-01)
8274:846b39508aff 6713916 scrub/resilver needlessly decompress data (141445-01)
8343:655db2375fed 6739553 libzfs_status msgid table is out of sync (141445-01) 6784104 libzfs unfairly rejects numerical values greater than 2^63 (141445-01) 6784108 zfs_realloc() should not free original memory on failure (141445-01)
8525:e0e0e525d0f8 6788830 set large value to reservation cause core dump (141445-01) 6791064 want sysevents for ZFS scrub (141445-01) 6791066 need to be able to set cachefile on faulted pools (141445-01) 6791071 zpool_do_import() should not enable datasets on faulted pools (141445-01) 6792134 getting multiple properties on a faulted pool leads to confusion (141445-01)
8547:bcc7b46e5ff7 6792884 Vista clients cannot access .zfs (141445-01)
8632:36ef517870a3 6798384 It can take a village to raise a zio (141445-01)
8636:7e4ce9158df3 6551866 deadlock between zfs_write(), zfs_freesp(), and zfs_putapage() (141909-01) 6504953 zfs_getpage() misunderstands VOP_GETPAGE() interface (141909-01) 6702206 ZFS read/writer lock contention throttles sendfile() benchmark (141445-01) 6780491 Zone on a ZFS filesystem has poor fork/exec performance (141445-01) 6747596 assertion failed: DVA_EQUAL(BP_IDENTITY(&zio->io_bp_orig), BP_IDENTITY(zio->io_bp))); (141445-01)
8692:692d4668b40d 6801507 ZFS read aggregation should not mind the gap (141445-01)
8697:e62d2612c14d 6633095 creating a filesystem with many properties set is slow (141445-01)
8768:dfecfdbb27ed 6775697 oracle crashes when overwriting after hitting quota on zfs (141909-01)
8811:f8deccf701cf 6790687 libzfs mnttab caching ignores external changes (141445-01) 6791101 memory leak from libzfs_mnttab_init (141445-01)
8845:91af0d9c0790 6800942 smb_session_create() incorrectly stores IP addresses (N/A) 6582163 Access Control List (ACL) for shares (141445-01) 6804954 smb_search - shortname field should be space padded following the NULL terminator (N/A) 6800184 Panic at smb_oplock_conflict+0x35() (N/A)
8876:59d2e67b4b65 6803822 Reboot after replacement of system disk in a ZFS mirror drops to grub> prompt (141445-01)
8924:5af812f84759 6789318 coredump when issue zdb -uuuu poolname/ (141445-01) 6790345 zdb -dddd -e poolname coredump (141445-01) 6797109 zdb: 'zdb -dddddd pool_name/fs_name inode' coredump if the file with inode was deleted (141445-01) 6797118 zdb: 'zdb -dddddd poolname inum' coredump if I miss the fs name (141445-01) 6803343 shareiscsi=on failed, iscsitgtd failed request to share (141445-01)
9030:243fd360d81f 6815893 hang mounting a dataset after booting into a new boot environment (141445-01)
9056:826e1858a846 6809691 'zpool create -f' no longer overwrites ufs infomation (141445-01)
9179:d8fbd96b79b3 6790064 zfs needs to determine uid and gid earlier in create process (141445-01)
9214:8d350e5d04aa 6604992 forced unmount + being in .zfs/snapshot/<snap1> = not happy (141909-01) 6810367 assertion failed: dvp->v_flag & VROOT, file: ../../common/fs/gfs.c, line: 426 (141909-01)
9229:e3f8b41e5db4 6807765 ztest_dsl_dataset_promote_busy needs to clean up after ENOSPC (141445-01)
9230:e4561e3eb1ef 6821169 offlining a device results in checksum errors (141445-01) 6821170 ZFS should not increment error stats for unavailable devices (141445-01) 6824006 need to increase issue and interrupt taskqs threads in zfs (141445-01)
9234:bffdc4fc05c4 6792139 recovering from a suspended pool needs some work (141445-01) 6794830 reboot command hangs on a failed zfs pool (141445-01)
9246:67c03c93c071 6824062 System panicked in zfs_mount due to NULL pointer dereference when running btts and svvs tests (141909-01)
9276:a8a7fc849933 6816124 System crash running zpool destroy on broken zpool (141445-03)
9355:09928982c591 6818183 zfs snapshot -r is slow due to set_snap_props() doing txg_wait_synced() for each new snapshot (141445-03)
9391:413d0661ef33 6710376 log device can show incorrect status when other parts of pool are degraded (141445-03)
9396:f41cf682d0d3 (part already merged) 6501037 want user/group quotas on ZFS (141445-03) 6827260 assertion failed in arc_read(): hdr == pbuf->b_hdr (141445-03) 6815592 panic: No such hold X on refcount Y from zfs_znode_move (141445-03) 6759986 zfs list shows temporary %clone when doing online zfs recv (141445-03)
9404:319573cd93f8 6774713 zfs ignores canmount=noauto when sharenfs property != off (141445-03)
9412:4aefd8704ce0 6717022 ZFS DMU needs zero-copy support (141445-03)
9425:e7ffacaec3a8 6799895 spa_add_spares() needs to be protected by config lock (141445-03) 6826466 want to post sysevents on hot spare activation (141445-03) 6826468 spa 'allowfaulted' needs some work (141445-03) 6826469 kernel support for storing vdev FRU information (141445-03) 6826470 skip posting checksum errors from DTL regions of leaf vdevs (141445-03) 6826471 I/O errors after device remove probe can confuse FMA (141445-03) 6826472 spares should enjoy some of the benefits of cache devices (141445-03)
9443:2a96d8478e95 6833711 gang leaders shouldn't have to be logical (141445-03)
9463:d0bd231c7518 6764124 want zdb to be able to checksum metadata blocks only (141445-03)
9465:8372081b8019 6830237 zfs panic in zfs_groupmember() (141445-03)
9466:1fdfd1fed9c4 6833162 phantom log device in zpool status (141445-03)
9469:4f68f041ddcd 6824968 add ZFS userquota support to rquotad (141445-03)
9470:6d827468d7b5 6834217 godfather I/O should reexecute (141445-03)
9480:fcff33da767f 6596237 Stop looking and start ganging (141909-02)
9493:9933d599bc93 6623978 lwb->lwb_buf != NULL, file ../../../uts/common/fs/zfs/zil.c, line 787, function zil_lwb_commit (141445-06)
9512:64cafcbcc337 6801810 Commit of aligned streaming rewrites to ZIL device causes unwanted disk reads (N/A)
9515:d3b739d9d043 6586537 async zio taskqs can block out userland commands (142901-09)
9554:787363635b6a 6836768 zfs_userspace() callback has no way to indicate failure (N/A)
9574:1eb6a6ab2c57 6838062 zfs panics when an error is encountered in space_map_load() (141909-02)
9583:b0696cd037cc 6794136 Panic BAD TRAP: type=e when importing degraded zraid pool. (141909-03)
9630:e25a03f552e0 6776104 "zfs import" deadlock between spa_unload() and spa_async_thread() (141445-06)
9653:a70048a304d1 6664765 Unable to remove files when using fat-zap and quota exceeded on ZFS filesystem (141445-06)
9688:127be1845343 6841321 zfs userspace / zfs get userused@ doesn't work on mounted snapshot (N/A) 6843069 zfs get userused@S-1-... doesn't work (N/A)
9873:8ddc892eca6e 6847229 assertion failed: refcount_count(&tx->tx_space_written) + delta <= tx->tx_space_towrite in dmu_tx.c (141445-06)
9904:d260bd3fd47c 6838344 kernel heap corruption detected on zil while stress testing (141445-06)
9951:a4895b3dd543 6844900 zfs_ioc_userspace_upgrade leaks (N/A)
10040:38b25aeeaf7a 6857012 zfs panics on zpool import (141445-06)
10000:241a51d8720c 6848242 zdb -e no longer works as expected (N/A)
10100:4a6965f6bef8 6856634 snv_117 not booting: zfs_parse_bootfs: error2 (141445-07)
10160:a45b03783d44 6861983 zfs should use new name <-> SID interfaces (N/A) 6862984 userquota commands can hang (141445-06)
10299:80845694147f 6696858 zfs receive of incremental replication stream can dereference NULL pointer and crash (N/A)
10302:a9e3d1987706 6696858 zfs receive of incremental replication stream can dereference NULL pointer and crash (fix lint) (N/A)
10575:2a8816c5173b (partial merge) 6882227 spa_async_remove() shouldn't do a full clear (142901-14)
10800:469478b180d9 6880764 fsync on zfs is broken if writes are greater than 32kb on a hard crash and no log attached (142901-09) 6793430 zdb -ivvvv assertion failure: bp->blk_cksum.zc_word[2] == dmu_objset_id(zilog->zl_os) (N/A)
10801:e0bf032e8673 (partial merge) 6822816 assertion failed: zap_remove_int(ds_next_clones_obj) returns ENOENT (142901-09)
10810:b6b161a6ae4a 6892298 buf->b_hdr->b_state != arc_anon, file: ../../common/fs/zfs/arc.c, line: 2849 (142901-09)
10890:499786962772 6807339 spurious checksum errors when replacing a vdev (142901-13)
11249:6c30f7dfc97b 6906110 bad trap panic in zil_replay_log_record (142901-13) 6906946 zfs replay isn't handling uid/gid correctly (142901-13)
11454:6e69bacc1a5a 6898245 suspended zpool should not cause rest of the zfs/zpool commands to hang (142901-10)
11546:42ea6be8961b (partial merge) 6833999 3-way deadlock in dsl_dataset_hold_ref() and dsl_sync_task_group_sync() (142901-09)
Discussed with: pjd Approved by: delphij (mentor) Obtained from: OpenSolaris (multiple Bug IDs) MFC after: 2 months
|
#
201143 |
|
28-Dec-2009 |
delphij |
Apply OpenSolaris revision 8012 which brings our zpool to version 14, making it possible for zpools created on OpenSolaris 2009.06 be used on FreeBSD.
PR: kern/141800 Submitted by: mm Reviewed by: pjd, trasz Obtained from: OpenSolaris MFC after: 2 weeks
|
#
185029 |
|
17-Nov-2008 |
pjd |
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
|
#
177698 |
|
28-Mar-2008 |
jb |
Forced commit to note that these files were repo copied.
|
#
168509 |
|
08-Apr-2007 |
pjd |
Move zpool.cache from /etc/zfs/ to /boot/zfs/, so we can keep it on dedicated /boot/ file system and use ZFS for the root file system.
|
#
168498 |
|
08-Apr-2007 |
pjd |
MFp4: Synchronize with recent OpenSolaris changes.
|
#
168404 |
|
05-Apr-2007 |
pjd |
Please welcome ZFS - The last word in file systems.
ZFS file system was ported from OpenSolaris operating system. The code in under CDDL license.
I'd like to thank all SUN developers that created this great piece of software.
Supported by: Wheel LTD (http://www.wheel.pl/) Supported by: The FreeBSD Foundation (http://www.freebsdfoundation.org/) Supported by: Sentex (http://www.sentex.net/)
|