Copy stable/10@r272459 to releng/10.1 as part of
the 10.1-RELEASE process.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Mark bundle as unused in case we're compiled with NORADIUS.

Fix a warning

Submitted by: Stefan Farfeleder <stefanf at FreeBSD dot org>

Make ppp WARNS=5 clean

Don't trust the MPPE key lengths passed back from the RADIUS server.
Instead, use the correct values based on the number of bits actually
negotiated.

Spotted by: Sergey Korolew <ds@rt.balakovo.ru>

When a RADIUS server is being used, don't use MPPE unless the RADIUS
server says it's ok.

Understand the following Microsoft Vendor Specific RADIUS attributes:

RAD_MICROSOFT_MS_MPPE_ENCRYPTION_POLICY
RAD_MICROSOFT_MS_MPPE_ENCRYPTION_TYPES
RAD_MICROSOFT_MS_MPPE_RECV_KEY
RAD_MICROSOFT_MS_MPPE_SEND_KEY

These attributes may be supplied by a RADIUS server when MSCHAPv2 is
used to authenticate.

It *should* now be possible to build ppp with -DNODES and still support
CHAP/MSCHAP/MSCHAPv2/MPPE via a RADIUS server, but the code isn't yet
smart enough to do that (building with -DNODES just looses these
facilities).

Sponsored by: Monzoon

Put back <string.h>

o Clean up some #includes
o Bump version number to 3.0.4
o When talking to a RADIUS server, provide a NAS-Port-Type.

When the NAS-Port-Type is Ethernet, provide a NAS-Port value equal
to the SESSIONID from the environment in direct mode or the
NGM_PPPOE_SESSIONID message in other modes. If no SESSIONID is found,
default to the interface index in client mode or zero in server mode.

When the NAS-Port-Type is ISDN, set the NAS-Port to the minor number
of the physical device (ie, the N in /dev/i4brbchN).

This makes it easier for the RADIUS server to identify the client
WRT accounting data etc.

Prompted by: lsz8425 <lsz8425@mail.cd.hn.cn>

Fix a syntax error

We don't need to include arpa/inet.h here. In fact, only FreeBSD needs
netinet/in.h.

#include netinet/in.h when !__FreeBSD__ to silence some warnings from
the inclusion of arpa/inet.h

Make the way FSM options are processed easier to read by using structures
instead of u_char *.

The changes are cosmetic except:

RecvConfigAck() now displays the options that are being ACK'd
Huge (bogus) options sent from the peer won't cause an infinite loop
SendIdent and ReceiveIdent are displayed consistenlty with other FSM data
LCP AUTHPROTO options that aren't understood are NAK'd, not REJ'd

Include arpa/inet.h

Merge the NETGRAPH branch into HEAD. tty devices now use netgraph's line
discipline to do the async escaping, but no other benefits are available yet.

Change ``ifdef HAVE_DES'' to ``ifndef NODES'' for consistency.

Make the Makefile a little more sane WRT RELEASE_CRUNCH.

Use the return value from snprintf() to keep a track of the length of
the display string in MPPEDispOpts.

PR: 35836
MFC After: 2 weeks

o Move NTOHL() and associated macros into <sys/param.h>. These are
deprecated in favor of the POSIX-defined lowercase variants.
o Change all occurrences of NTOHL() and associated marcros in the
source tree to use the lowercase function variants.
o Add missing license bits to sparc64's <machine/endian.h>.
Approved by: jake
o Clean up <machine/endian.h> files.
o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>.
o Remove prototypes for non-existent bswapXX() functions.
o Include <machine/endian.h> in <arpa/inet.h> to define the
POSIX-required ntohl() family of functions.
o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>,
and <sys/param.h>.
o Prepend underscores to the ntohl() family to help deal with
complexities associated with having MD (asm and inline) versions, and
having to prevent exposure of these functions in other headers that
happen to make use of endian-specific defines.
o Create weak aliases to the canonical function name to help deal with
third-party software forgetting to include an appropriate header.
o Remove some now unneeded pollution from <sys/types.h>.
o Add missing <arpa/inet.h> includes in userland.

Tested on: alpha, i386
Reviewed by: bde, jake, tmm

Correct alignment issues

Obtained from: OpenBSD

Send a reset request for every packet received when our encryption
dictionaries are out of sync.

This avoids the complications that happen when our original reset
request gets lost in transit (quite likely in hind sight, given a
lossy link) when we end up ignoring the peer for the next (up to)
256 packets.

Submitted by: Nick Sayer <nsayer@quack.kfu.com>

When we miss one or more packets in stateful mode *and* need to
perform a key change, *and* our sequence numbers have wrapped,
ensure that the number of key changes is calculated correctly.

The previous code counted down from a negative number to zero,
re-encrypting the current key on each iteration - this took some
time and strangely enough got the answer wrong !!!

Fix a(nother) spelling mistake while I'm there.

Reduce the interface MTU by 2 when MPPE has been successfully negotiated.

This is necessary because MPPE will combine the protocol id with the
payload received on the tun interface, encrypt it, then prepend its
own protocol id, effectively increasing the payload by two bytes.

Add support for stateful MPPE (microsoft encryption) providing
encryption compatibility with Windows 2000. Stateful encryption
uses less CPU but is bad on lossy transports.

The ``set mppe'' command has been expanded. If it's used with any
arguments, ppp will insist on encryption, closing LCP if the other
end refuses.

Unfortunately, Microsoft have abused the CCP reset request so that
receiving a reset request does not result in a reset ack when using
MPPE...

Sponsored by: Monzoon Networks AG and FreeBSD Services Limited

Add a ``Usable'' function to the ccp switch. The function
is called prior to sending a CCP configure request for a
given protocol. The default is to send the request, but
this is overridden for MPPE which checks to see if the lcp
negotiations agreed CHAP81, and if not fails.

Use the same function to decide if we should reject peer
requests for MPPE.

This should get rid of those boring messages about not being
able to initialise MPPE when we don't negotiate CHAP81.

Make the MPPE MasterKey Invalid messages a bit clearer (it now
complains that you can't do MPPE without CHAP81).

Reset MasterKeyValid to zero when we hit phase DEAD.

Log the ``MPPE: MasterKey is invalid...'' message as a CCP
diagnostic rather than a warning.

Introduce another global (MPPE_IsServer) so that we initiate the
MPPE session keys correctly.

I'm a bit dubious about this code. It seems that the session keys
are initialised differently based on whether you're the client or
the server. One side is the server if it issues the first challenge,
but of course you can issue a challenge from both sides.... at the
same time. Sounds like another wonderful M$ assumption...

Ppp can now talk to itself correctly using encryption.

Problem solved by: Ustimenko Semen <semen@iclub.nsu.ru>
Hair torn out by: me

Merge some OpenBSD/NetBSD fixes to the recent MPPE/CHAP0x81 update.

Various whitespace changes.
Make some functions static.

Add MPPE and MSChap v2 support (denied and disabled by default)

Submitted by: Ustimenko Semen <semen@iclub.nsu.ru>