Copy stable/10@r272459 to releng/10.1 as part of
the 10.1-RELEASE process.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

If the peer REJects our MRU request and that request is for a value
less than the current MTU, set our mtu to the value requested.

Integrate some OpenBSD alignment fixes. This hopefully also fixes PR 38058...

Obtained from: Brad <brad@comstyle.com>

Implement an ``enable/disable echo'' option, defaults to off.
This allows LCP ECHOs to be enabled independently of LQR reports.

Note: This introduces a change in the default behaviour (search for lqr and
echo in the man page). I'll update UPDATING to reflect this.

PR: 74821

Fix the build on 64-bit platforms.

Make ppp WARNS=5 clean

Include the correct file (stdarg.h) and use va_list rather than _BSD_VA_LIST_

Suggested by: mike

Remove whitespace at the end of lines.

o Clean up some #includes
o Bump version number to 3.0.4
o When talking to a RADIUS server, provide a NAS-Port-Type.

When the NAS-Port-Type is Ethernet, provide a NAS-Port value equal
to the SESSIONID from the environment in direct mode or the
NGM_PPPOE_SESSIONID message in other modes. If no SESSIONID is found,
default to the interface index in client mode or zero in server mode.

When the NAS-Port-Type is ISDN, set the NAS-Port to the minor number
of the physical device (ie, the N in /dev/i4brbchN).

This makes it easier for the RADIUS server to identify the client
WRT accounting data etc.

Prompted by: lsz8425 <lsz8425@mail.cd.hn.cn>

Allow the peer to modify the LQR interval

Make the way FSM options are processed easier to read by using structures
instead of u_char *.

The changes are cosmetic except:

RecvConfigAck() now displays the options that are being ACK'd
Huge (bogus) options sent from the peer won't cause an infinite loop
SendIdent and ReceiveIdent are displayed consistenlty with other FSM data
LCP AUTHPROTO options that aren't understood are NAK'd, not REJ'd

Merge the NETGRAPH branch into HEAD. tty devices now use netgraph's line
discipline to do the async escaping, but no other benefits are available yet.

Change ``ifdef HAVE_DES'' to ``ifndef NODES'' for consistency.

Make the Makefile a little more sane WRT RELEASE_CRUNCH.

Add a ``log'' command for logging specific information.
Add an ``UPTIME'' variable to indicate the bundle uptime.

It's now possible to put something like this in ppp.linkdown
for a server setup:

MYADDR:
log Session closing: User USER, address HISADDR, up UPTIME

Fixed some memory leakage with commands that expand words.
Made some functions static.
Fixed a diagnostic bug (iface add .... SIOCDIFADDR)

Fix AUTH callback negotiations.

MFC after: 1 week

When the peer fails to specify an MRU and a 1500 byte MRU is not
allowed either because of the transport or configuration, send a
MRU NAK only once, then allow the negotiations to proceed.

rfc1661 says that 1500 should always be allowed and rfc2516 says
that 1492 is the maximum for PPPoE. This changes ppp so that it
only weakly suggests 1492, then goes with the default (leaving
the problem in the hands of the peer WRT how they set their MTU).

MFC after: 1 week

sigpause() -> sigsuspend()
sigblock() -> sigprocmask()

o Add ipv6 support, abstracting most NCP addresses into opaque
structures (well, they're treated as opaque).

It's now possible to manage IPv6 interface addresses and routing
table entries and to filter IPV6 traffic whether encapsulated or
not.

IPV6CP support is crude for now, and hasn't been tested against
any other implementations.

RADIUS and IPv6 are independent of eachother for now.

ppp.linkup/ppp.linkdown aren't currently used by IPV6CP

o Understand all protocols(5) in filter rules rather than only a select
few.

o Allow a mask specification for the ``delete'' command. It's now
possible to specifically delete one of two conflicting routes.

o When creating and deleting proxy arp entries, do it for all IPv4
interface addresses rather than doing it just for the ``current''
peer address.

o When iface-alias isn't in effect, don't blow away manually (via ``iface
add'') added interface addresses.

o When listening on a tcp server (diagnostic) socket, bind so that a
tcp46 socket is created -- allowing both IPv4 and IPv6 connections.

o When displaying ICMP traffic, don't display the icmp type twice.
When display traffic, display at least some information about unrecognised
traffic.

o Bump version

Inspired after filtering work by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>

If the peer REJects our MRU REQ, stop REQing it -- *EVEN* if we're
doing PPPoE and the default MRU is therefore too big.

When negotiating with win2k, we ask for MRU 1492 and the win2k box
NAKs us saying ``MRU 1492''. This doesn't make sense to me. When
we continue to request MRU 1492, the win2k box eventually REJs our
MRU. This fix allows negotiations to continue at that point,
bringing the link up and potentially allowing the win2k box to send
us frames that are too large. AFAICT this is better than failing
to bring the link up.... probably !

I have no idea how to do the equivalent of ``route get'' or
``ifconfig -a'' under win2k, so I can't tell what MTU it actually
ends up using.

I believe the bug is in win2k (it's certainly mis-negotiating).
I'll MFC given the release engineers permission as code freeze
begins on August 1.

PR: 29277
MFC after: 3 days

Handle peer REQ/NAKs of >1500 byte MRUs when we have no preference.

MFC after: 3 days

Ignore (with a warning message) mtu/mru configurations that are greater
than the maximum physical values.

MFC after: 1 week

Don't accept chap80lm by default - it doesn't work.

MFC after: 1 week

Handle hardware-imposed MTU/MRU limitations. PPPoE will no longer
allow MRU/MTU negotiations to exceed 1492.

Add an optional ``max'' specifier to ``set m[rt]u'', ie.

set mtu max 1480

Bump the ppp version number.

Sponsored by: Monzoon Networks AG and FreeBSD Services Limited

Convert IIJ copyrights to BSD copyrights.

Approved by: Toshiharu OHNO <tohno@sirius.ocn.ne.jp>

Call MSCHAP CHAP80 in ``show lcp'' so that it's consistent with CHAP81.

Accept MSCHAPv2 by default.
Enable and accept MPPE by default.

Various whitespace changes.
Make some functions static.

Add MPPE and MSChap v2 support (denied and disabled by default)

Submitted by: Ustimenko Semen <semen@iclub.nsu.ru>

Support link identification from rfc1570
Two new commands are available; ``ident'' and ``sendident''.

Don't assign an MTU based on the peers first-link MRU in MP mode.
Use the peers MRRU as we're supposed to.

When ppp can't identify the relevant name, don't use "???", use
<nnn> or <0xxxx> instead.

Add a bunch of `const's and fix a typo.

Submitted by: Rich Neswold <rneswold@MCS.Net>

Cosmetic: Make struct mbuf more like kernel mbufs.

$Id$ -> $FreeBSD$

Silence a warning about uninitialized variables.

Initialise `mp'.

Allow our endpoint discriminator to be enabled, disabled, accepted
and denied. This is necessary for some MP implementations that
get confused if you accept their endpoint discriminator but reject
their MRRU.

o Alter the mbuf type as it's processed by different layers.
o Show more information about missing MP fragments in ``show mp''.
o Do away with mbuf_Log(). It was showing mbuf stats twice on
receipt of LCP/CCP/IPCP packets.... ???!!?
o Pre-allocate a bit extra when creating LQR packets to avoid having
to allocate another mbuf in mbuf_Prepend().

Deal with the fact that as we now mbuf_Read the fsm
header in fsm_Input() we often end up with a NULL mbuf.

Deal with a possible NULL mbuf being passed into
mbuf_Prepend().

Adjust some spacing to make things more consistent.

o Redesign the layering mechanism and make the aliasing code part of
the layering.

We now ``stack'' layers as soon as we open the device (when we figure
out what we're dealing with). A static set of `dispatch' routines are
also declared for dealing with incoming packets after they've been
`pulled' up through the stacked layers.

Physical devices are now assigned handlers based on the device type
when they're opened. For the moment there are three device types;
ttys, execs and tcps.

o Increment version number to 2.2
o Make an entry in [uw]tmp for non-tty -direct invocations (after
pap/chap authentication).
o Make throughput counters quad_t's
o Account for the absolute number of mbuf malloc()s and free()s in
``show mem''.
o ``show modem'' becomes ``show physical''.

Revert the ACCMAP changes where we OR the peers accmap
with our own if there are differing bits (last two revisions
of lcp.c). This change broke at least one negotiation
session.
Instead, we just use an OR of the two accmap values when
we're doing the ASYNC framing.

If we adjust our required ACCMAP due to a more restrictive
ACCMAP being REQuested by the peer, also increment our FSM
id so that we don't end up sending out a new REQ with the
same ID and different data (the changed ACCMAP).

When negotiating ACCMAPs, sync our ACCMAP with the
peers by ORing the two together and NAKing or REQing
the result rather than allowing seperate local/peer
values.
If the peer REJs our ACCMAP and our ACCMAP isn't 0,
warn about it and ignore the rejection.

Allow control over the number of ConfigREQ & TermREQ attempts
that are made in each of the FSMs (LCP, CCP & IPCP) and the
number of REQs/Challenges for PAP/CHAP by accepting more arguments
in the ``set {c,ip,l}cpretry'' and ``set {ch,p}apretry'' commands.

Change the non-convergence thresholds to 3 times the number of configured
REQ tries (rather than the previous fixed ``10''). We now notice
repeated NAKs and REJs rather than just REQs.

Don't suggest that CHAP 0x05 isn't supported when it's not configured.

Fix some bugs that expose themselves with smaller numbers of retries:
o Handle instantaneous disconnects (set device /dev/null) correctly
by stopping all fsm timers in fsm2initial.
o Don't forget to uu_unlock() devices that are files but are not
ttys (set device /dev/zero).

Fix a *HORRENDOUS* bug in RFC1661 (already fixed for an Open event in state
``Closed''):
According to the state transition table, a RCR+ or RCR- received in
the ``Stopped'' state are supposed to InitRestartCounter, SendConfigReq
and SendConfig{Ack,Nak}. However, in ``Stopped'', we haven't yet
done a TLS (or the last thing we did is a TLF). We must therefore
do the TLS at this point !

This was never noticed before because LCP and CCP used not use
LayerStart() for anything interesting, and IPCP tends to go into
Stopped then get a Down because of an LCP RTR rather than getting a
RCR again.

Fully support both NT and LANMan CHAP type 0x80 as both
authenticator and authenticatee.

Initial RADIUS support (using libradius). See the man page for
details. Compiling with -DNORADIUS (the default for `release')
removes support.

TODO: The functionality in libradius::rad_send_request() needs
to be supplied as a set of routines so that ppp doesn't
have to wait indefinitely for the radius server(s). Instead,
we need to get a descriptor back, select() on the descriptor,
and ask libradius to service it when necessary.
For now, ppp blocks SIGALRM while in rad_send_request(), so
it misses PAP/CHAP retries & timeouts if they occur.

Only PAP is functional. When CHAP is attempted, libradius
complains that no User-Password has been specified... rfc2138
says that it *mustn't* be used for CHAP :-(

Sponsored by: Internet Business Solutions Ltd., Switzerland

If we've configured CBCP *and* another not-so-important
CALLBACK protocol and end up agreeing CBCP, DTRT and go
into CBCP phase rather than mistakenly terminating as
if CBCP wasn't agreed.
Problem reported by: Alexander Dubinin <alex@nstl.nnov.ru>

Warn that the specific chap protocol isn't supported when
rejecting CHAP because of byte 5.
Suggested by: Daniel O'Callaghan <danny@hilink.com.au>

Initialise lcp::his_mru to the ``set mtu'' value if it's less
than DEF_MRU, allowing our interface mtu to be decreased
despite negotiation with the peer.

Don't cast potentially unaligned addresses to pointers to
non-char types on non-i386 architectures.
On Alpha and Sparc we get a bus error if we do.

o Support callback types NONE, E.164, AUTH and CBCP.
(see the new ``set callback'' and ``set cbcp'' commands)
o Add a ``cbcp'' log level and mbuf type.
o Don't dump core when \T is given in ``set login'' or
``set hangup''.
o Allow ``*'' and blanks as placeholders in ppp.secret and
allow a fifth field for specifying auth/cbcp dialback
parameters.
o Remove a few extraneous #includes
o Define the default number of REQs (restart counter) in defs.h
rather than hardcoding ``5'' all over the place.
o Fix a few man page inconsistencies.

o Fix remaining sizeof problems for 64 bit machines.
o Allow ``set ....'' when we have multiple links but aren't in
multilink mode.
o Do a TLS when we receive a ``Open'' event in ``Closed'' state,
despite the rfc state transition table. This is clearly an
error in the RFC as TLS cannot have yet been called (without
TLF) in the ``Closed'' state.
I've posted a message to comp.protocols.ppp for confirmation.

Add ``ipcp'' as an optional argument to ``open'', and make
open capable of re-negotiatiating the various layers.

It is now possible to change various link options and then
re-open the relevant layer, making the changes effective -
for example, switching off VJ compression or starting ECHO
LQRs on-the-fly.

Fix a rather nasty use of `static'. This caused a SEGV
when running ``link * load label'' as we ended up recursing
back into command_Interpret after nuking our command arg list.

Some documentation corrections & typo fixes....

MFMP: Make ppp multilink capable.
See the file README.changes, and re-read the man page.

Merge from MP branch:
Correct magic number format string

Remove unused #includes.
Make various bits static.
Remove unused variables.
Submitted by: eivind

Allow an optional delay when specifying "set openmode active".
The delay defaults to 1 sec (as it always has) unless we've done
a ~p in interactive mode or we've actually detected a HDLC frame.
This is now cleanly implemented (via async timers) so that it is
possible for LCP to come up despite the delay if an LCP REQ is
received.

This will hopefully solve situations with slow servers or slirp
scenarios (where ECHO is left on the port for a second or so before
the peer enters packet mode).

Also, ~p in interactive mode no longer changes the value of the default
openmode delay and -dedicated mode enters packet mode in the right state
according to the value of openmode.

Lose <net/if_var.h> !
This'll require a `make installworld'.

Make things work when sizeof(long) != 32 (hopefully)

Cosmetic (style):
sizeof(var) -> sizeof var
sizeof type -> sizeof(type)

Suggested by: J Wunsch <j@uriah.heep.sax.de>

Fix PAP, CHAP & LQR req (I broke the byte ordering when
I did the deflate re-org).
Make PAP & CHAP negotiation prettier in the log file.
If both PAP & CHAP are `enabled' and the peer NAKs CHAP
suggesting PAP, be friendly and REQ PAP the next time.
This is in line with the rfc.

Abstract the CCP layer a level.
Add DEFLATE support.

Fix prototypes.
Remove extraneous decls.
Add ``const'' to several places.
Allow ``make NOALIAS=1'' to remove IP aliasing.
Merge with OpenBSD - only the Makefiles vary.

We can now survive a compile with
-Wall -Wbad-function-cast -Wcast-align -Wcast-qual
-Winline -Wmissing-declarations -Wmissing-prototypes
-Wnested-externs -Wpointer-arith -Wredundant-decls
-Wshadow -Wstrict-prototypes -Wwrite-strings -Wchar-subscripts
(although the Makefile just contains -Wall).

Add throughput logging (disabled by default).
Use "enable throughput" to see modem & IPCP throughput.
Removed an extraneous prompt()

Abstract data read from and written to the tun device,
allowing for a possible header on the front of all packets.
In OpenBSD, there's a structure containing the address
family here.
If we're building under OpenBSD, set up the ``flags'' part
of struct tuninfo (not there under FreeBSD) so that we config
the interface as POINTOPOINT.
Prefix prototypes with ``extern'' in os.c for consistency.

These changes are cosmetic under FreeBSD, but allow ppp to
build & work under OpenBSD (bar the srandomdev() stuff,
the inclusing of <net/if_var.h> and some Makefile symantecs).

Update the cftypes arrays according to rfc1700.
Log IPCP reqests as IPCP.

Fix typo that causes CHAP RESPONSEs to *always*
be damned M$ responses if you've got DES.

Don't pass global vars as args.
Remove local/global conflicts.

o Bump version to 1.3 to reflect major changes
o Report modem connect time properly
o Report bytes in/out over physical media
o Fix phases (TERMINATE is *higher than* DEAD)
o Do a LayerFinish from LcpDown
o Bring down IPCP & CCP when we enter PHASE_TERMINATE
o Give a new prompt when we go to PHASE_DEAD
o Stop the modem timer properly when idle
o Treat sig 15 like an exiting carrier loss
o Log (DEBUG) offline & online transitions

Cosmetic:
Move prototypes into the correct headers.

Cosmetic (no functional changes):
o Add missing $Id$s
o Move extern decls from .c -> .h files
o Staticize
o Remove #includes from .h files
o style(9)ify includes
o bcopy -> memcpy
bzero -> memset
bcmp -> memcmp
index -> strchr
rindex -> strrchr
o Move timeout.h -> timer.h (making it consistent w/ timer.c)
o Add -Wmissing-prototypes

Initialise LCP, IPCP and CCP as soon as LCP is down.
Without this, in -auto mode, we stay in ST_STOPPING
and never check our dial filters to see if it's time
to bring the line up again.

This may make "set stopped" redundant.

Change things around a bit when bringing down the layers.

o LcpLayerDown() no longer does a NewPhase(PHASE_TERMINATE).
Instead, it's done in LcpLayerFinish(). LayerFinish() gets
called by the FSM after the LCP FSM goes through the Stopping
and Stopped states.

o -direct and -background mode exit at PHASE_TERMINATE, not
PHASE_DEAD.

The result is that LCP, CCP & IPCP are brought down cleanly on both
sides of the link (not just our side). Killing ppp rather than just
closing it still makes it get out after the LCP SendTerminateReq().
I'll have a look at that soon. We're probably not actually sending
the REQ :-(

If "set mtu" is used, *and* the mtu is less than the
value requested by the peer, NAK using this value
rather than silently just changing the interface
mtu.

Don't depend on time.h including sys/types.h

Allow Microsoft CHAP authentication.
This is a combination of MD4 & DES.
Submitted by: Gabor Kincses <gabor@acm.org>

Undo botched commit (local changes got in)

Don't allow accept/deny when it's not appropriate.
Log PAP/CHAP users in utmp & wtmp, allowing it to
be avoided with "disable utmp"

Don't pause for one second before starting LCP
negotiation. Instead, incrementally pause after
receiving LCPs with the same magic. We can now
suffer a server that waits more than 1 second before
responding. Pauses greater than a second get
hopelessly confusing as when the server eventually
starts, it sees a flood of Config Requests followed
by config NAKs and changes of magic. This causes the
server to change its magic over and over.....

Sleep for a second before sending the first LCP
config request. This stops us from squirting stuff
down a line that still has ECHO turned on because the
peer hasn't had a chance to start yet.
Lead to the cause by: Greg Lehey <grog@lemis.com>

Bring CCP and IPCP layers down properly when LCP
comes down. Give a count of bytes sent/received
in IPCP log.

Allow the transition from an idle timeout value
of zero (no timeout) while IPCP is up.
Move some prototypes into .h files and re-order
some includes.

Cosmetic: Make LogPrintf() calls consistent.

Make the code format more in line with style(9).
Update loadalias to use the new libalias api.
Update to version 1.1.

Expand the "set stopped" command so that it can
idependently time out any of the FSMs.

Split LCP logging into LCP, IPCP and CCP logging,
and make room in "struct fsm" for the log level
that the state machine should use.

Remove extraneous prototypes.

Remove srandomdev fallback code

Overhaul ppp:
o Use syslog
o Remove references to stdout/stderr (incl perror())
o Introduce VarTerm - the interactive terminal or zero
o Allow "set timeout" to affect current session
o Change "set debug" to "set log"
o Allow "set log [+|-]flag"
o Make MSEXT and PASSWDAUTH stuff the default
o Move all #ifdef DEBUG stuff into the code - this
shouldn't be too much overhead. It's now controlled
with "set log +debug"
o Add "set log command, debug, tun, warn, error, alert"
o Remove cdefs.h, and assume an ansi compiler.
o Improve all diagnostic output
o Don't trap SIGSEGV
o SIGHUP now terminates again (log files are controlled
by syslog)
o Call CloseModem() when changing devices
o Fix parsing of third arg of "delete"

I think this fixes the "magic is same" problems that some
people have been experiencing.
The man page is being rewritten. It'll follow soon.

Remove initial startup printf's in -direct mode.
Make "same magic" error send a NAK (as per rfc).

De-couple ppp from libalias. If libalias isn't there, the
alias commands simply won't work. Only root may specify the
location of the alias lib (otherwise, it's hard-coded).

Make logprintf silently fail if LogOpen hasn't been called.

Suggested by: eivind

Fix the reconnect option, and add an explanation to vars.h

Mega update to sort out bad implementations
of reconnect & -background.

o Fix reconnect anomolies.
o Make reconnect apply to failed LQR hangups (& mention in man page).
o Make reconnect effective in -background mode.
o Listen on socket in -background mode.
o Try all phone numbers in -background mode.
o Insist on system arg in -background mode.
o Make a control-connection close command exit in -background mode.
o Output status message to stdout on exit of parent in -background mode.
o Don't notify parent of success too soon.
o Describe termination EX_* code.
o Miscelaneous diagnostic corrections.
o Remove redundant connect_time from modem.c.
o Don't repeatedly DownConnection().

Cosmetique

Print out reject masks on "show lcp"

Use random() for GenerateMagic()

Tidy up the code - bounds checking, return
value checking etc.

Submitted by: eivind

Make ppp exit on loss of carrier in -background mode.

Submitted by: Jim Carroll <jim@carroll.com>

Closes pr 2711
Fix -background option. Parent returns after the line is established
(or not established).
Definitely a candidate for 2.2

Revert $FreeBSD$ to $Id$

Make the long-awaited change from $Id$ to $FreeBSD$

This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.

1. Room to calculate MD5 for CHAP negotiation is shorter than
required. a core is not dumped at first connecting time and
dumped at second or third time. (patch I)
2. A routine for "show route" refers out of allocated space.
Values pointed by "lp" should be read as CHAR, I think.
there is also no free() for disallocation. (patch II)

Here is also a patch for an improvement: In current imprementation,
even if PPP connection is disconnected by time out, prompt of
interactive mode does not change from "PPP>" to "ppp>" to
indicate the disconnection on a terminal.
So I modified the code to do that. (patch III)

Submitted-By: NAKAMURA Motonori <motonori@econ.kyoto-u.ac.jp>

Here is a diff of /usr/src/usr.sbin/ppp against current. The diffs
add some logging functionality which I find very useful.
'set debug link' will record just link up/down and address assignments.
'set debug connect' will record the entire chat dialog
'set debug carrier' will record just chat lines including 'CARRIER'
(so that I can be sure I'm getting a 28.8 line).

There was a global change required to permit LogPrintf to take a bit
mask instead of a bit position value (to permit logging some events
on either of two flags, so that no change in 'set debug lcp' would
result from the code supporting 'link'. Thus the diffs are rather
long for such a small change. The man page is also touched.

Oh, and there was a slight syntax problem in route.c

Reviewed by: phk
Submitted by: Tony Kimball <alk@Think.COM>

Some patches to ppp which improve stability. I have been running a
ppp based on these patches for about 3 weeks with no downtime.

The original submitters comments:

Two features iijppp has over kernel ppp that I like are predictor1
compression and demand dialing. Here are a few bug fixes.

I expanded the priority queueing scheme and discovered it was broken
due to the assignment at ip.c line 300. All packets were being
queued at the same priority.

Fixing priority queueing broke predictor1 compression. Packets
were compressed before being queued and predictor1 worked as long
as the packets were popped off the queue in the same order they
were pushed onto the queue.

There were a few byte order problems in IP header tests also.

There is a recursion problem in SendLqrReport(). LcpClose() is
called when "Too many echo packets are lost" which winds up in
SendLqrReport() again. I believe the original intention was to
just stop the LQR timer with the call to StopLqr() but the side
effects hurt.

Submitted by: John Capo <jc@irbs.com>

Final cleanup for now. -Wall is now silent. A couple of bogons found.

1. All fragments (except the first one) of a fragmented packet were
dropped - devet@adv.IAEhv.nl (Arjan de Vet)
2. Will not read data from telnet connection - John Capo <jc@irbs.com>
3. Using LQM option could be drop the link due to LcpLayerDown() doesn't
stop LQR timer. - Brian <brian@awfulhak.demon.co.uk>
4. Allow to describe a syntax of filters that is not only port number
but also by name in /etc/service. - Rich Murphey <rich@lamprey.utmb.edu>

Reviewed by: Atsushi Murai <amurai@spec.co.jp>
Submitted by: devet@adv.IAEhv.nl, jc@irbs.com, brian@awfulhak.demon.co.uk,
rich@lamprey.utmb.edu

>Number: 591
>Category: bin
>Synopsis: SPAP request REJexted in stead of NAKed
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs (FreeBSD bugs mailing list)
>State: open
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Jul 5 01:40:01 1995
>Originator: Dick van den Burg
>Organization:
>Release: FreeBSD 2.0.5-RELEASE i386
>Environment:
>Description:

When trying to connect with ppp to a Shiva Lanrover (version 3.2) the
authentication fails because the SPAP (Shiva Secure PAP) configuration
request the is sent by Shive is REJected by ppp in stead of NAKed.

Reviewed by: amurai@spec.c.jp and friends
Submitted by: burg@is.ge.com

Remove trailing whitespace.

1.Reducing cpu usage at off connection.
2.Implment Redail function as working correctly.
3.Clean up a code as I notice.
4.Now, RTT getting close to 50ms with ISDN/TA 38400bps !!

Reviewed by: amurai@spec.co.jp
Submitted by: amurai@spec.co.jp

New user Process PPP based on iij-ppp0.94beta2.

o Supporting SYNC SIO device (But need a device driver)
- add "set speed sync"
o Fixing bug for Predictor-1 function.
o Add new parameter that re-sent interval for set timeout commands.
o Improving RTT (Round Trip Time) and reducing processor time.
- Previous Timer service was using polling, and now using
SIGALRM ;-)
- A 0.94beta2 will not work correctly....

-- Follows are additinal feature not including 0.94beta2
o Support Proxy ARP
- add "enable/disable proxy" commands
o Marging common routine in CHAP/PAP.
o Enhancing LCP/IPCP log information.
o Support local Authfication connection on port 300x and tty.
- You can set up pair of your "hostname -s" and
password in ppp.secret. if either ppp.secret file nor
your hostname line don't exist, It will notify a message
and working as same as previous version.(Backword compatibility)
- If you did set up them, It's allow connection but nothing to do
except help and passwd command.
- add "passwd yourpasswd" commands
o Support afilter - keep Alive filter that a packet can send/receiving
according to ifilter/ofilter but doesn't count it as preventing idle
timer expires.
- Same syntax of other filters.
o Fixing bugs reported by current user for previous one. Thanks !!

Reviewed by: Atsushi Murai (amurai@spec.co.jp)

This commit was generated by cvs2svn to compensate for changes in r6059,
which included commits to RCS files with non-trunk default branches.