Copy stable/10@r272459 to releng/10.1 as part of
the 10.1-RELEASE process.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC r267921, r267934, r267949, r267959, r267966, r268202, r268276,
r268427, r268428, r268521, r268638, r268639, r268701, r268777,
r268889, r268922, r269008, r269042, r269043, r269080, r269094,
r269108, r269109, r269281, r269317, r269700, r269896, r269962,
r269989.

Catch bhyve up to CURRENT.

Lightly tested with FreeBSD i386/amd64, Linux i386/amd64, and
OpenBSD/amd64. Still resolving an issue with OpenBSD/i386.

Many thanks to jhb@ for all the hard work on the prior MFCs !

r267921 - support the "mov r/m8, imm8" instruction
r267934 - document options
r267949 - set DMI vers/date to fixed values
r267959 - doc: sort cmd flags
r267966 - EPT misconf post-mortem info
r268202 - use correct flag for event index
r268276 - 64-bit virtio capability api
r268427 - invalidate guest TLB when cr3 is updated, needed for TSS
r268428 - identify vcpu's operating mode
r268521 - use correct offset in guest logical-to-linear translation
r268638 - chs value
r268639 - chs fake values
r268701 - instr emul operand/address size override prefix support
r268777 - emulation for legacy x86 task switching
r268889 - nested exception support
r268922 - fix INVARIANTS build
r269008 - emulate instructions found in the OpenBSD/i386 5.5 kernel
r269042 - fix fault injection
r269043 - Reduce VMEXIT_RESTARTs in task_switch.c
r269080 - fix issues in PUSH emulation
r269094 - simplify return values from the inout handlers
r269108 - don't return -1 from the push emulation handler
r269109 - avoid permanent sleep in vm_handle_hlt()
r269281 - list VT-x features in base kernel dmesg
r269317 - Mark AHCI fatal errors as not completed
r269700 - Support PCI extended config space in bhyve
r269896 - Minor cleanup
r269962 - use max guest memory when creating IOMMU domain
r269989 - fix interrupt mode names

MFC 266125:
Implement a PCI interrupt router to route PCI legacy INTx interrupts to
the legacy 8259A PICs.

MFC 261904,261905,262143,262184,264921,265211,267169,267292,267294:
Various PCI fixes:
- Allow PCI devices to be configured on all valid bus numbers from 0 to 255.
- Tweak the handling of PCI capabilities in emulated devices to remove
the non-standard zero capability list terminator.
- Add a check to validate that memory BARs of passthru devices are 4KB
aligned.
- Respect and track the enable bit in the PCI configuration address word.
- Handle quad-word access to 32-bit register pairs.

MFC 262744:
Add SMBIOS support.

A new option, -U, can be used to set the UUID in the System
Information (Type 1) structure.

MFC 258859,259081,259085,259205,259213,259275,259482,259537,259702,259779:
Several changes to the local APIC support in bhyve:
- Rename 'vm_interrupt_hostcpu()' to 'vcpu_notify_event()'.
- If a vcpu disables its local apic and then executes a 'HLT' then spin
down the vcpu and destroy its thread context. Also modify the 'HLT'
processing to ignore pending interrupts in the IRR if interrupts have
been disabled by the guest. The interrupt cannot be injected into the
guest in any case so resuming it is futile.
- Use callout(9) to drive the vlapic timer instead of clocking it on each
VM exit.
- When the guest is bringing up the APs in the x2APIC mode a write to the
ICR register will now trigger a return to userspace with an exitcode of
VM_EXITCODE_SPINUP_AP.
- Change the vlapic timer lock to be a spinlock because the vlapic can be
accessed from within a critical section (vm run loop) when guest is using
x2apic mode.
- Fix the vlapic version register.
- Add a command to bhyvectl to inject an NMI on a specific vcpu.
- Add an API to deliver message signalled interrupts to vcpus. This allows
callers to treat the MSI 'addr' and 'data' fields as opaque and also lets
bhyve implement multiple destination modes: physical, flat and clustered.
- Rename the ambiguously named 'vm_setup_msi()' and 'vm_setup_msix()' to
'vm_setup_pptdev_msi()' and 'vm_setup_pptdev_msix()' respectively.
- Consolidate the virtual apic initialization in a single function:
vlapic_reset()
- Add a generic routine to trigger an LVT interrupt that supports both
fixed and NMI delivery modes.
- Add an ioctl and bhyvectl command to trigger local interrupts inside a
guest. In particular, a global NMI similar to that raised by SERR# or
PERR# can be simulated by asserting LINT1 on all vCPUs.
- Extend the LVT table in the vCPU local APIC to support CMCI.
- Flesh out the local APIC error reporting a bit to cache errors and
report them via ESR when ESR is written to. Add support for asserting
the error LVT when an error occurs. Raise illegal vector errors when
attempting to signal an invalid vector for an interrupt or when sending
an IPI.
- Export table entries in the MADT and MP Table advertising the stock x86
config of LINT0 set to ExtInt and LINT1 wired to NMI.

MFC 260206:
Rework the DSDT generation code a bit to generate more accurate info about
LPC devices. Among other things, the LPC serial ports now appear as
ACPI devices.

MFC 259826,259997,259998:
Support soft power-off via the ACPI S5 state for bhyve guests and wire
up a virtual power button to SIGTERM:
- Implement the PM1_EVT and PM1_CTL registers required by ACPI.
- Emulate the Reset Control register at I/O port 0xcf9.
- Advertise an _S5 package.
- Implement an SMI_CMD register with commands to enable and disable ACPI.
Currently the only change when ACPI is enabled is to enable the virtual
power button via SIGTERM.
- Implement a fixed-feature power button when ACPI is enabled by asserting
PWRBTN_STS in PM1_EVT when SIGTERM is received.
- Add support for EVFILT_SIGNAL events to mevent.
- Implement support for the ACPI system command interrupt (SCI) and assert
it when needed based on the values in PM1_EVT. Mark the SCI as active-low
and level triggered in the MADT and MP Table.

MFC 257422,257661,258075,258476,258494,258579,258609,258699:
Several enhancements to the I/O APIC support in bhyve including:
- Move the I/O APIC device model from userspace into vmm.ko and add
ioctls to assert and deassert I/O APIC pins.
- Add HPET device emulation including a single timer block with 8 timers.
- Remove the 'vdev' abstraction.

Approved by: neel

MFC r256657,r257018,r257347,r257423,r257729,r257767,
r257933,r258609,r258614,r258668,r258673,r258855

Pull in some minor bugfixes and functionality enhancements
from CURRENT. These are candidates to be moved to 10.0-release.

r258855
mdoc: quote string properly.

r258673
Don't create an initial value for the host filesystem of "/".

r258668
Allow bhyve and bhyveload to attach to tty devices.

r258614
The 22-bit Data Byte Count (DBC) field of a Physical Region Descriptor was
being read as a 32-bit quantity by the bhyve AHCI driver.

r258609
Fix discrepancy between the IOAPIC ID advertised by firmware tables and the
actual value read by the guest.

r257933
Route the legacy timer interrupt (IRQ0) to pin 2 of the IOAPIC.

r257767
Fix an off-by-one error when iterating over the emulated PCI BARs.

r257729
Add the VM name to the process name with setproctitle().

r257423
Make the virtual ioapic available unconditionally in a bhyve virtual machine.

r257347
Update copyright to include the author of the LPC bridge emulation code.

hand-merge r257018
Tidy usage messages for bhyve and bhyveload.

r256657
Add an option to bhyveload(8) that allows setting a loader environment variable
from the command line.

Discussed with: neel

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Go way past 11 and bump bhyve's max vCPUs to 16.

This should be sufficient for 10.0 and will do
until forthcoming work to avoid limitations
in this area is complete.

Thanks to Bela Lubkin at tidalscale for the
headsup on the apic/cpu id/io apic ASL parameters
that are actually hex values and broke when
written as decimal when 11 vCPUs were configured.

Approved by: re@

Simplify the assignment of memory to virtual machines by requiring a single
command line option "-m <memsize in MB>" to specify the memory size.

Prior to this change the user needed to explicitly specify the amount of
memory allocated below 4G (-m <lowmem>) and the amount above 4G (-M <highmem>).

The "-M" option is no longer supported by 'bhyveload' and 'bhyve'.

The start of the PCI hole is fixed at 3GB and cannot be directly changed
using command line options. However it is still possible to change this in
special circumstances via the 'vm_set_lowmem_limit()' API provided by
libvmmapi.

Submitted by: Dinakar Medavaram (initial version)
Reviewed by: grehan
Obtained from: NetApp

Reorder code to avoid the stat buffer being used uninitialized.

Obtained from: NetApp

Specify the length of the mapping requested from 'paddr_guest2host()'.

This seems prudent to do in its own right but it also opens up the possibility
of not having to mmap the entire guest address space in the 'bhyve' process
context.

Discussed with: grehan
Obtained from: NetApp

Merge projects/bhyve to head.

'bhyve' was developed by grehan@ and myself at NetApp (thanks!).

Special thanks to Peter Snyder, Joe Caradonna and Michael Dexter for their
support and encouragement.

Obtained from: NetApp

Rename fbsdrun.* -> bhyverun.*

bhyve is intended to be a generic hypervisor, and not FreeBSD-specific.

(renaming internal routines will come later)

Reviewed by: neel
Obtained from: NetApp

- Add in an XSDT to stop acpidump from exiting with a
'XSDT corrupted' error
- Fix up OEMID/OEM Table ID string padding in the DSDT.

Output on a verbose boot now looks like

...
ACPI: RSDP 0xf0400 00024 (v02 BHYVE )
ACPI: XSDT 0xf0480 00034 (v01 BHYVE BVXSDT 00000001 INTL 20120320)
ACPI: APIC 0xf0500 0004A (v01 BHYVE BVMADT 00000001 INTL 20120320)
ACPI: FACP 0xf0600 0010C (v05 BHYVE BVFACP 00000001 INTL 20120320)
ACPI: DSDT 0xf0800 000F2 (v02 BHYVE BVDSDT 00000001 INTL 20120320)
ACPI: FACS 0xf0780 00040
...

Obtained from: NetApp

ACPI support for bhyve.

The -A option will create the minimal set of required ACPI tables in
guest memory. Since ACPI mandates an IOAPIC, the -I option must also
be used.

Template ASL files are created, and then passed to the iasl compiler
to generate AML files. These are then loaded into guest physical mem.

In support of this, the ACPI PM timer is implemented, in 32-bit mode.

Tested on 7.4/8.*/9.*/10-CURRENT.

Reviewed by: neel
Obtained from: NetApp
Discussed with: jhb (a long while back)