Copy stable/10@r272459 to releng/10.1 as part of
the 10.1-RELEASE process.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Remove all legacy ATA code parts, not used since options ATA_CAM enabled in
most kernels before FreeBSD 9.0. Remove such modules and respective kernel
options: atadisk, ataraid, atapicd, atapifd, atapist, atapicam. Remove the
atacontrol utility and some man pages. Remove useless now options ATA_CAM.

No objections: current@, stable@
MFC after: never

Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH.
This makes our naming scheme more closely match other systems and the
expectations of much third-party software. MIPS builds which are little-endian
should require and exhibit no changes. Big-endian TARGET_ARCHes must be
changed:
From: To:
mipseb mips
mipsn32eb mipsn32
mips64eb mips64

An entry has been added to UPDATING and some foot-shooting protection (complete
with warnings which should become errors in the near future) to the top-level
base system Makefile.

Remove pty(4) from our kernel configurations.

As of FreeBSD 8, this driver should not be used. Applications that use
posix_openpt(2) and openpty(3) use the pts(4) that is built into the
kernel unconditionally. If it turns out high profile depend on the
pty(4) module anyway, I'd rather get those fixed. So please report any
issues to me.

The pty(4) module is still available as a kernel module of course, so a
simple `kldload pty' can be used to run old-style pseudo-terminals.

o) Use ABI, not ISA_* options, to determine whether to compile bits if libkern
required for the ABI the kernel is being built for.
XXX This is implemented in a kind-of nasty way that involves including source
files, but it's still an improvement.
o) Retire ISA_* options since they're unused and were always wrong.

Use new option names for NFS client and NFS server

See UPDATING entry for 20110427

Move 'cpu CPU_RMI' to std.xlr, this is common for all XLR cpus.

Re-format XLR configuartion files and remove obsolete options.

ldscript and conf cleanup for MIPS

- Remove sys/conf/ldscript.mips.64 and sys/conf/ldscript.mips.n32 and use
ldscript.mips for all ABIs. The default OUTPUT_FORMAT of the toolchain
is correct.
- Remove LDSCRIPT_NAME entires from XLR n32 and n64 conf files.
- Remove TARGET_BIG_ENDIAN from XLR conf files.
- Fix machine entry in XLRN32

I2C drivers for XLR/XLS processors.

- Major update to xlr_i2c.c: do multi-byte ops correctly, remove unnecessary
code, add mutex to protect bus operations, style(9) fixes.
- Drivers for I2C devices on XLR/XLS engineering boards, ds1374u RTC, max6657
temparature sensor and at24co2n EEPROM.

Submitted by: Sreekanth M. S. (kanthms at netlogicmicro com)

Remove the 'machine mips' from DEFAULTS. Put the proper 'machine mips
mipsel' or 'machine mips mipseb' into the config file (with a few 64's
tossed in for good measure). This will let us build the proper
kernels with different worlds as part of make universe.

Switch to the new network driver nlge, the old rge driver is deprecated now.

Rename TARGET_XLR_XLS to CPU_RMI to match other CPU_xxx definitions.
use CPU_RMI all XLR configurations. Update ident string for N32 and
N64 kernels.

This pushes all of JC's patches that I have in place. I
am now able to run 32 cores ok.. but I still will hang
on buildworld with a NFS problem. I suspect I am missing
a patch for the netlogic rge driver.

JC check and see if I am missing anything except your
core-mask changes

Obtained from: JC

Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had
the illusion of a tunable setting but was always turned on regardless.

MFC after: 1 week

Get rid of unused options: KERNPHYSADDR, KERNVIRTADDR, PHYSADDR, PHYS_ADDR_64BIT

Discussed with: gonzo, imp

Adjust style (following the already existing rules) for the newly
introduced option DEADLKRES.

Reported by: danfe, julian, avg

Add the options DEADLKRES (introducing the deadlock resolver thread) in
the 'debugging' section of any HEAD kernel and enable for the mainstream
ones, excluding the embedded architectures.
It may, of course, enabled on a case-by-case basis.

Sponsored by: Sandvine Incorporated
Requested by: emaste
Discussed with: kib

My current conf, that comes up but
locks up in make buildworld.

You need to follow the mips wiki for building
the nfs partition and setup things to mount there
(in the conf and in your bootp setup).

Fix svn properties and remove a P4 keyword.

Using svn cp rather than cp to copy these files over had the benefit
of preserving their history. It had the problem that it also copied
over mergeinfo data. Since we're retiring the projects/mips branch,
I'm removing the svn:mergeinfo property from them all.

Submitted by: jhb

Merge from projects/mips to head by hand:

Copy over XLR kernel config file.

My NFS configured version.

Ok it helps if you add the bootp options too
so that you can get an address ;-)

Try moving to NFS mount of entire root

Ok With this commit we actually get through
the mi_startup (or to the last of it).. and
hit a panic after :

uart0: <16550 or compatible> on iodi0
Trap cause = 2 (TLB miss....)

I did have to take the pci bus OUT of the
build to get this far, hit a cache error with
the PCI code in. Interesting thing is the machine
reboots too ;-)

adds XLR config