Copy stable/10@r272459 to releng/10.1 as part of
the 10.1-RELEASE process.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC r268808:
Increase maximal number of SCSI ports in CTL from 32 to 128.

After I gave each iSCSI target its own port, the old limit appeared to be
not so big. This change almost proportionally increases per-LUN memory
use, but it is still three times better then it was before r268807.

MFC r268302:
Pass through iSCSI session ISID from LOGIN request to the CTL frontend.

ISID is an important part of initiator transport ID for iSCSI. It is not
used now, but should be to properly implement persistent reservation.

MFC r268291:
Create separate CTL port for every iSCSI target (and maybe portal group).

Having single port for all iSCSI connections makes problematic implementing
some more advanced SCSI functionality in CTL, that require proper ports
enumeration and identification.

This change extends CTL iSCSI API, making ctld daemon to control list of
iSCSI ports in CTL. When new target is defined in config fine, ctld will
create respective port in CTL. When target is removed -- port will be
also removed after all active commands through that port properly aborted.
This change require ctld to be rebuilt to match the kernel.

As a minor side effect, this allows to have iSCSI targets without LUNs.
While that may look odd and not very useful, that is not incorrect.

MFC r268284:
Introduce new IOCTL CTL_PORT_LIST reporting in more flexible XML format.

Leave old CTL_GET_PORT_LIST in place so far. Garbage-collect it later.

MFC r264530:

Properly pass the initiator address when running in proxy mode.

Sponsored by: The FreeBSD Foundation

MFC r264526:

Properly identify target portal when running in proxy mode. While here,
remove CTL_ISCSI_CLOSE, it wasn't used or implemented anyway.

Sponsored by: The FreeBSD Foundation

MFC r264525:

Add some stuff to make it easier to figure out for the system administrator
whether the ICL_KERNEL_PROXY stuff got compiled in correctly.

Sponsored by: The FreeBSD Foundation

MFC r264524:

Make it possible for the iSCSI target side to operate in both normal
and ICL_KERNEL_PROXY mode, and fix some bit rot so the latter actually
works again.

Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Add some spare fields to structs used by the new iSCSI stack - some just
in case, some for future MC/S support.

This requires kernel and world rebuild.

Approved by: re (blanket)
Sponsored by: FreeBSD Foundation

Bring in the new iSCSI target and initiator.

Reviewed by: ken (parts)
Approved by: re (delphij)
Sponsored by: FreeBSD Foundation

Add LUN resizing to CTL. Also make it possible to explicitly set
size when creating file-backed or device-backed LUN.

Reviewed by: ken (earlier version)
Sponsored by: The FreeBSD Foundation

Add the CAM Target Layer (CTL).

CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.

It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.

Some CTL features:

- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.

(1) HA Support is just an API stub, and needs much more to be fully
functional.

ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.

ctl.h: Basic function declarations and data structures.

ctl_backend.c,
ctl_backend.h: The basic CTL backend API.

ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.

ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.

ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.

ctl_debug.h: Debugging support.

ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.

ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.

ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.

ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.

ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.

ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.

ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.

ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.

ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.

ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.

ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.

ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.

scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.

README.ctl.txt: CTL code features, roadmap, to-do list.

usr.sbin/Makefile: Add ctladm.

ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.

usr.bin/Makefile: Add ctlstat.

ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.

sys/conf/files: Add CTL files.

sys/conf/NOTES: Add device ctl.

sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.

Add several mode page definitions for CTL.

sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.

sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.

scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.

amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.

i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.

Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month