Copy stable/10@r272459 to releng/10.1 as part of
the 10.1-RELEASE process.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC UEFI loader

This MFC consists of the following SVN revisions:
258741 261568 261603 261668 263115 263117 263968 264078 264087 264088
264092 264095 264115 264132 264208 264261 264262 264263 264319 265028
265057 268974

Detailed commit messages:

r258741: Note that libstand is 32-bit on amd64 and powerpc64

r261568: Build libstand as a 64-bit library on amd64

The 32-bit bootloaders now link against libstand.a in
sys/boot/libstand32, so there is no need to force /usr/lib/libstand.a
to be 32-bit.

r261603: Don't force efi to a 32-bit build on amd64

r261668: Build libstand as a 64-bit library on ppc64

The 32-bit bootloaders now link against libstand.a in
sys/boot/libstand32, so there is no need to force /usr/lib/libstand.a
to be 32-bit.

This is equivalent to r261568 for amd64.

r263115: Add amd64 EFI headers

r263117: Connect 64-bit boot ficl to the build

It is not yet used, but this will ensure it doesn't get broken.

r263968: Use EFI types for EFI values (silences warnings).

EFI UINTN is actually a 64-bit type on 64-bit processors.

r264078: Put each source file on a separate line

This will simplify rebasing the amd64 UEFI patch set.

r264087: Build boot/ficl as 64-bit library on amd64

The 32-bit bootloaders on amd64 now use the 32-bit version in ficl32,
as is done with libstand32. The native 64-bit ficl will be used by the
upcoming UEFI loader.

r264088: Merge efilib changes from projects/uefi

r247216: Add the ability for a device to have an "alias" handle.

r247379: Fix network device registration.

r247380: Adjust our load device when we boot from CD under UEFI.

The process for booting from a CD under UEFI involves adding a FAT
filesystem containing your loader code as an El Torito boot image.
When UEFI detects this, it provides a block IO instance that points
at the FAT filesystem as a child of the device that represents the CD
itself. The problem being that the CD device is flagged as a "raw
device" while the boot image is flagged as a "logical partition".
The existing EFI partition code only looks for logical partitions and
so the CD filesystem was rendered invisible.

To fix this, check the type of each block IO device. If it's found to
be a CD, and thus an El Torito boot image, look up its parent device
and add that instead so that the loader will then load the kernel from
the CD filesystem. This is done by using the handle for the boot
filesystem as an alias.

Something similar to this will be required for booting from other media
as well as the loader will live in the EFI system partition, not on the
partition containing the kernel.

r247381: Remove a scatalogical debug printf that crept in.

r264092: Add -fPIC for amd64

r264095: Support UEFI booting on amd64 via loader.efi

This is largely the work from the projects/uefi branch, with some
additional refinements. This is derived from (and replaces) the
original i386 efi implementation; i386 support will be restored later.

Specific revisions of note from projects/uefi:

r247380:

Adjust our load device when we boot from CD under UEFI.

The process for booting from a CD under UEFI involves adding a FAT
filesystem containing your loader code as an El Torito boot image.
When UEFI detects this, it provides a block IO instance that points at
the FAT filesystem as a child of the device that represents the CD
itself. The problem being that the CD device is flagged as a "raw
device" while the boot image is flagged as a "logical partition". The
existing EFI partition code only looks for logical partitions and so
the CD filesystem was rendered invisible.

To fix this, check the type of each block IO device. If it's found to
be a CD, and thus an El Torito boot image, look up its parent device
and add that instead so that the loader will then load the kernel from
the CD filesystem. This is done by using the handle for the boot
filesystem as an alias.

Something similar to this will be required for booting from other
media as well as the loader will live in the EFI system partition, not
on the partition containing the kernel.

r246231:

Add necessary code to hand off from loader to an amd64 kernel.

r246335:

Grab the EFI memory map and store it as module metadata on the kernel.

This is the same approach used to provide the BIOS SMAP to the kernel.

r246336:

Pass the ACPI table metadata via hints so the kernel ACPI code can
find them.

r246608:

Rework copy routines to ensure we always use memory allocated via EFI.

The previous code assumed it could copy wherever it liked. This is not
the case. The approach taken by this code is pretty ham-fisted in that
it simply allocates a large (32MB) buffer area and stages into that,
then copies the whole area into place when it's time to execute. A more
elegant solution could be used but this works for now.

r247214:

Fix a number of problems preventing proper handover to the kernel.

There were two issues at play here. Firstly, there was nothing
preventing UEFI from placing the loader code above 1GB in RAM. This
meant that when we switched in the page tables the kernel expects to
be running on, we are suddenly unmapped and things no longer work. We
solve this by making our trampoline code not dependent on being at any
given position and simply copying it to a "safe" location before
calling it.

Secondly, UEFI could allocate our stack wherever it wants. As it
happened on my PC, that was right where I was copying the kernel to.
This did not cause happiness. The solution to this was to also switch
to a temporary stack in a safe location before performing the final
copy of the loaded kernel.

r246231:

Add necessary code to hand off from loader to an amd64 kernel.

r246335:

Grab the EFI memory map and store it as module metadata on the kernel.

This is the same approach used to provide the BIOS SMAP to the kernel.

r246336:

Pass the ACPI table metadata via hints so the kernel ACPI code can
find them.

r246608:

Rework copy routines to ensure we always use memory allocated via EFI.

The previous code assumed it could copy wherever it liked. This is not
the case. The approach taken by this code is pretty ham-fisted in that
it simply allocates a large (32MB) buffer area and stages into that,
then copies the whole area into place when it's time to execute. A more
elegant solution could be used but this works for now.

r247214:

Fix a number of problems preventing proper handover to the kernel.

There were two issues at play here. Firstly, there was nothing
preventing UEFI from placing the loader code above 1GB in RAM. This
meant that when we switched in the page tables the kernel expects to
be running on, we are suddenly unmapped and things no longer work. We
solve this by making our trampoline code not dependent on being at any
given position and simply copying it to a "safe" location before
calling it.

Secondly, UEFI could allocate our stack wherever it wants. As it
happened on my PC, that was right where I was copying the kernel to.
This did not cause happiness. The solution to this was to also switch
to a temporary stack in a safe location before performing the final
copy of the loaded kernel.

r247216:

Use the UEFI Graphics Output Protocol to get the parameters of the
framebuffer.

r264115: Fix printf format mismatches

r264132: Connect sys/boot/amd64 to the build

r264208: Do not build the amd64 UEFI loader with GCC

The UEFI loader causes buildworld to fail when building with (in-tree)
GCC, due to a typedef redefinition. As it happens the in-tree GCC
cannot successfully build the UEFI loader anyhow, as it does not support
__attribute__((ms_abi)). Thus, just avoid trying to build it with GCC,
rather than disconnecting it from the build until the underlying issue
is fixed.

r264261: Correct a variable's type for 64-bit Ficl

FICL_INT is long.

r264262: Fix printf args for 64-bit archs

r264263: Add explicit casts to quiet warnings in libefi

r264319: Fix EFI loader object tree creation on 9.x build hosts

Previously ${COMPILER_TYPE} was checked in sys/boot/amd64, and the efi
subdirectory was skipped altogether for gcc (since GCC does not support
a required attribute). However, during the early buildworld stages
${COMPILER_TYPE} is the existing system compiler (i.e., gcc on 9.x build
hosts), not the compiler that will eventually be used. This caused
"make obj" to skip the efi subdirectory. In later build stages
${COMPILER_TYPE} is "clang", and then the efi loader would attempt to
build in the source directory.

r265028 (dteske): Disable the beastie menu for EFI console ...

which doesn't support ANSI codes (so things like `at-xy', `clear', and
other commands don't work making it impossible to generate a living
menu).

r265057 (nwhitehorn): Turn off various fancy instruction sets...

as well as deduplicate some options. This makes the EFI loader build
work with CPUTYPE=native in make.conf on my Core i5.

r268974 (sbruno): Supress clang warning for FreeBSD printf %b and %D formats

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

r261567: Build a 32-bit libstand under sys/boot/

A 32-bit libstand is needed on 64-bit platforms for use by various
bootloaders. Previously only the 32-bit version was built, installed
as /usr/lib/libstand.a.

A new 64-bit libstand consumer will arrive in the near future, so move
the bootloader-specific 32-bit version to sys/boot/libstand32/.

Explicitly link against this version in the 32-bit loaders.

r261614: Build a 32-bit libstand under sys/boot/ for ppc64

This change is equivalent to r261567 for i386/amd64.

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Hook in new files menusets.4th and manual.

Approved by: adrian (co-mentor) (implicit)

Reduce the number of attempts to detect proper kld format for the amd64
loader.

Remove unneeded flag.

Import work done under project/nand (@235533) into head.

The NAND Flash environment consists of several distinct components:
- NAND framework (drivers harness for NAND controllers and NAND chips)
- NAND simulator (NANDsim)
- NAND file system (NAND FS)
- Companion tools and utilities
- Documentation (manual pages)

This work is still experimental. Please use with caution.

Obtained from: Semihalf
Supported by: FreeBSD Foundation, Juniper Networks

i386 zfsloader: rename LIBZFS to LIBZFSBOOT

... to avoid name clash with the other libzfs

MFC after: 1 month

- Whitespaces fixed only

Approved by: rwatson (mentor)

New boot loader menus from Devin Teske.
Discussed on hackers and recommended for inclusion into 9.0 at the devsummit.
All support email to devin dteske at vicor dot ignoreme dot com .

Submitted by: dteske at vicor dot ignoreme dot com
Reviewed by: me and many others

For consistency, change all 'i386' and MACHINE_ARCH to x86.

Reviewed by: jhb
MFC after: 1 week

MF tbemd: Minor tweaks, prefer MACHINE_CPUARCH generally to MACHINE_ARCH

Correctly setup LDADD with regards to libstand. The submitter points
out that "on amd64, libstand.a is compiled for i386, but is still installed
under ${WORLDTMP}/usr/lib instead of ${WORLDTMP}/usr/lib32. Even if it
would be installed there, ld on amd64 is set up incorrectly with a
${TOOLS_PREFIX}/usr/lib/i386 default path, so it wouldn't link. The reason
it does link under gcc is that gcc passes -L${WORLDTMP}/usr/lib twice,
even for -m32 builds, which is also incorrect, but accidentally works in
this case."

Submitted by: Dimitry Andric <dimitry at andric.com>

Create a seperate ZFS enabled loader.

This adds zfsloader which will be called by zfsboot/gptzfsboot code rather
than the tradional loader. This eliminates the need to set the
LOADER_ZFS_SUPPORT variable in order to get a ZFS enabled loader.

Note however, that you must reinstall your bootcode (zfsboot/gptzfsboot)
in order for the boot process to use the new loader.

New installations will no longer be required to build a ZFS enabled
loader for a working ZFS boot system. Installing zfsboot/gptzfsboot is
sufficient for acknowledging the use of CDDL code and therefore the ZFS
enabled loader.

Based on a previous patch from jhb@

Reviewed by: jhb@
MFC after: 2 weeks

- Make it possible to disable GPT support by setting LOADER_NO_GPT_SUPPORT
in make.conf or src.conf.
- When GPT is enabled (which it is by default), use memory above 1 MB and
leave the memory from the end of the bss to the end of the 640k window
purely for the stack. The loader has grown and now it is much more
common for the heap and stack to grow into each other when both are
located in the 640k window.

PR: kern/129526
MFC after: 1 week

Fix build when WITH_SSP is set explicitly.

Submitted by: Jeremie Le Hen

Fix building without ZFS (can't find library)

Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.

This bring huge amount of changes, I'll enumerate only user-visible changes:

- Delegated Administration

Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.

- L2ARC

Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.

- slog

Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).

- vfs.zfs.super_owner

Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.

- chflags(2)

Not all the flags are supported. This still needs work.

- ZFSBoot

Support to boot off of ZFS pool. Not finished, AFAIK.

Submitted by: dfr

- Snapshot properties

- New failure modes

Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests

- Refquota, refreservation properties

Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.

- Sparse volumes

ZVOLs that don't reserve space in the pool.

- External attributes

Compatible with extattr(2).

- NFSv4-ACLs

Not sure about the status, might not be complete yet.

Submitted by: trasz

- Creation-time properties

- Regression tests for zpool(8) command.

Obtained from: OpenSolaris

Enable GCC stack protection (aka Propolice) for userland:
- It is opt-out for now so as to give it maximum testing, but it may be
turned opt-in for stable branches depending on the consensus. You
can turn it off with WITHOUT_SSP.
- WITHOUT_SSP was previously used to disable the build of GNU libssp.
It is harmless to steal the knob as SSP symbols have been provided
by libc for a long time, GNU libssp should not have been much used.
- SSP is disabled in a few corners such as system bootstrap programs
(sys/boot), process bootstrap code (rtld, csu) and SSP symbols themselves.
- It should be safe to use -fstack-protector-all to build world, however
libc will be automatically downgraded to -fstack-protector because it
breaks rtld otherwise.
- This option is unavailable on ia64.

Enable GCC stack protection (aka Propolice) for kernel:
- It is opt-out for now so as to give it maximum testing.
- Do not compile your kernel with -fstack-protector-all, it won't work.

Submitted by: Jeremie Le Hen <jeremie@le-hen.org>

MFp4: add FireWire/dcons support in loader for i386/amd64.

It is disabled by default. You need to put
LOADER_FIREWIRE_SUPPORT=yes in /etc/make.conf
and rebuild loader to enable it.
(cd /sys/boot/i386 && make clean && make && make install)

You can find a short introduction of dcons at
http://wiki.freebsd.org/DebugWithDcons

Don't unconditionally compile-in the bcache code. It's only used on
i386/amd64 and pc98. Remove useless calls to bcache_init() from the
ia64 and sparc64 loaders, as well as from the OFW common code.

Reimplementation of world/kernel build options. For details, see:

http://lists.freebsd.org/pipermail/freebsd-current/2006-March/061725.html

The src.conf(5) manpage is to follow in a few days.

Brought to you by: imp, jhb, kris, phk, ru (all bugs are mine)

Add back some bits.

Temperarly disable building in the bzip2 support by default so we can fit
on the i386 floppies. Sigh, I hate floppies.

Put bzip2 support on equal footing with gzip support.
Enable bzip2 support by default, set LOADER_NO_BZIP2_SUPPORT to disable it.

Pointy hat to: sobomax

NOFORTH -> NO_FORTH

Pick up loader.rc from its old home.

Disable the beastie menu. It offends some and annoys everyone else, and I'm
frankly tired of the controversy. When people ask me why FreeBSD isn't user-
friendly, I'll tell them that I tried. RIP.

For some reason crt0.o needs to be linked first for pxeboot(8) to
work. This is odd because loader(8) doesn't suffer from this problem.
Perhaps pxeboot bootstrap can be fixed to handle this better.
Anyway, PXE booting should work again.

Clean CLEANFILES.

kzip(8) is long dead.

- Factor out -nostdlib to an upper level Makefile.inc.

- Now that bsd.prog.mk deals with programs linked with -nostdlib
better, and has a notion of an "internal" program, use PROG
where possible. This has a good impact on the contents of
.depend files and causes programs to be linked with cc(1).

XXX: boot2 couldn't be converted as it's actually two programs.

Tested on: i386, amd64

Argh, unbreak "make depend" for AMD64.

Reported by: kris

- Removed -elf which is not a valid gcc(1) option anymore.
- Removed -ffreestanding; it's enforced by ../Makefile.inc.

Untangle building of AMD64 boot code.

Tested on: amd64 (sledge)

First round of cleanups to sys/boot/ makefiles:

- do not use PROG for what's not a real C program,
- use sys.mk transformation rules where possible,
- only create the "machine" symlink on AMD64,
- removed MAINTAINER lines in individual makefiles,
- added the LIBSTAND defitinion to <bsd.libnames.mk>,
- somewhat better contents in .depend files.

Tested on: i386, amd64
Prodded by: bde

Inherit BINDIR from a parent Makefile.inc.

Only include ../Makefile.inc once in loader/Makefile.

Build on amd64. Yes, I know this isn't particularly nice.

Enable the new bootloader for i386 only. The new loader.rc is will only
be installed if an old one does not exist, i.e. only during install, not
during upgrades.

Approved by: re

Add a new bootloader menu. Pull in screen.4th and frames.4th from the
examples directory to support it. This is installed only on i386 for
now. It will be enabled in a later commit.

Approved by: re

Simplify the Makefile by just using our standard PROG variable.

Revert previous untested revision. The i386 loader consists of three parts:
At the front is btxldr, in the middle is BTX itself (our mini-kernel), and
then the 'client' (loader.bin) which is the actual loader itself. boot2
just executes a raw ELF or a.out binary with the only setup provided being
that a bootinfo structure is passed on the stack. Now, since loader.bin
is a BTX client, the loader needs to be able to locate a BTX kernel for
the client to execute in the context. Thus, just like pxelder, btxldr
uses the a.out header on the loader binary to find the BTX kernel stored
in the loader and set it up. It does _not_ just reuse the BTX kernel
that boot2 invoked it with. This is because it can't assume that it will
_have_ a "spare" BTX kernel lying around. For example, when cdboot
loads the loader there isn't an existing BTX kernel. In fact, cdboot
will only work with an a.out loader as well since it also "borrows" the
BTX kernel in the loader binary (which it finds by parsing the a.out
header) just as pxeldr does. The only difference between cdboot and
pxeldr is where they get /boot/loader from.

If we wanted to make /boot/loader be an actual ELF binary we would need
to change the following utilites to handle that (and they all have to be
able to handle locating the BTX kernel inside of an ELF binary somehow):
- btxldr
- pxeldr
- cdboot

If we didn't want to require a flag day but make the transition smooth
then we need to be able to support both a.out and ELF versions of
/boot/loader which isn't exactly trivial since all three of these utilities
are written in assembly.

Pointy-hat to: peter

Try #2 at having /boot/loader default to ELF. Have pxeldr build its
own a.out version of loader.bin rather than depend on ../loader/loader
being a.out.

Initiate deorbit burn of i386 a.out kld "support" in loader. Note that
this was quite broken, it never was updated for metadata support.
The a.out kld file support was never really used, as it wasn't necessary.
You could always load elf kld's, even in an a.out kernel.

Revert the part of Kirks UFS2 commit which added divdi3.c and moddi3.c
to libi386, this issue was resolved already in a cleaner way.

This commit adds basic support for the UFS2 filesystem. The UFS2
filesystem expands the inode to 256 bytes to make space for 64-bit
block pointers. It also adds a file-creation time field, an ability
to use jumbo blocks per inode to allow extent like pointer density,
and space for extended attributes (up to twice the filesystem block
size worth of attributes, e.g., on a 16K filesystem, there is space
for 32K of attributes). UFS2 fully supports and runs existing UFS1
filesystems. New filesystems built using newfs can be built in either
UFS1 or UFS2 format using the -O option. In this commit UFS1 is
the default format, so if you want to build UFS2 format filesystems,
you must specify -O 2. This default will be changed to UFS2 when
UFS2 proves itself to be stable. In this commit the boot code for
reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c)
as there is insufficient space in the boot block. Once the size of the
boot block is increased, this code can be defined.

Things to note: the definition of SBSIZE has changed to SBLOCKSIZE.
The header file <ufs/ufs/dinode.h> must be included before
<ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and
ufs_lbn_t.

Still TODO:
Verify that the first level bootstraps work for all the architectures.
Convert the utility ffsinfo to understand UFS2 and test growfs.
Add support for the extended attribute storage. Update soft updates
to ensure integrity of extended attribute storage. Switch the
current extended attribute interfaces to use the extended attribute
storage. Add the extent like functionality (framework is there,
but is currently never used).

Sponsored by: DARPA & NAI Labs.
Reviewed by: Poul-Henning Kamp <phk@freebsd.org>

-ffreestanding is the word for /sys.

Install files via FILES, there's no reason to compare them before installing.

Needs a.out support built into the loader.

Add support for loading bzip2-compressed kernels and modules. This support
is turned off by default and could be enabled by defining LOADER_BZIP2_SUPPORT
make variable. Also make gzip support optional (turned on by default) -
it could be turned off via LOADER_NO_GZIP_SUPPORT make variable.

Please note, that due to limit on the amount of memory available to the
loader(8), it is possible to load modules/kernels compressed with the smallest
block size supported by the bzip2 - 100k (`-1' bzip2(1) option), however
even in this mode bzip2(1) usually provides better compression ratio than
gzip(1) in its best compression mode.

MFC after: 1 month

Create backup copies using install(1).

OK, now I am scared of pxeldr. It had /boot/loader appended onto
the end of it and decoded the headers.

Submitted by: jhb

Generate an ELF /boot/loader instead of fake a.out. The fake a.out wrapper
did not work with old a.out-only bootblocks anyway. :-(

Remove -DNEW_LINKERSET, it is not used here anymore. This is now native.

Strip the .comment and .note sections when stripping. There's no
point in retaining this info, particularly under BTX.

MF4: Add LOADER_TFTP_SUPPORT make.conf flag.

Look for libstand in the built tree rather than in /usr/lib. This
likely could be done better, but the tree is broken and I wanted to
get a fix into the tree.

Reviewed by: msmith

Move man page directives to common/Makefile.inc.

Now that we are compiling PXE into libi386, we don't need ../libi386 in
.PATH anymore.

Move the building of the PXE module into libi386.

Make PXE use the UDP API. This allows for both TFTP and NFS support.
You may specify TFTP or NFS via compile time options in the loader,
but not both at this time.

Also, remove a warning about not knowing how to boot from network
devices. We can obviously do that now.

Mega i386 loader commit.
- Don't hard code 0x10000 as the entry point for the loader. Instead add
src/sys/boot/i386/Makefile.inc which defines a make variable with the
entry point for the loader. Move the loader's entry point up to
0x20000, which makes PXE happy.
- Don't try to use cpp to parse btxldr for the optional BTXLDR_VERBOSE,
instead use m4 to achieve this. Also, add a BTXLDR_VERBOSE knob in the
btxldr Makefile to turn this option on.
- Redo parts of cdldr's Makefile so that it now builds and installs cdboot
instead of having i386/loader/Makefile do that. Also, add in some more
variables to make the pxeldr Makefile almost identical and thus to ease
maintainability.
- Teach cdldr about the a.out format. Cdldr now parsers the a.out header
of the loader binary and relocates it based on that. The entry point of
the loader no longer has to be hardcoded into cdldr. Also, the boot
info table from mkisofs is no longer required to get a useful cdboot.
- Update the lsdev function for BIOS disks to parse other file systems
(such as DOS FAT) that we currently support. This is still buggy as
it assumes that a floppy with a DOS boot sector actually has a MBR and
parses it as such. I'll be fixing this in the future.
- The biggie: Add in support for booting off of PXE-enabled network
adapters. Currently, we use the TFTP API provided by the PXE BIOS.
Eventually we will switch to using the low-level NIC driver thus
allowing both TFTP and NFS to be used, but for now it's just TFTP.

Submitted by: ps, alfred
Testing by: Benno Rice <benno@netizen.com.au>

Add a NOFORTH variable so we can build a smaller loader without
Forth support, for use with PicoBSD

Approved-By: jordan

Fix bogon in previous commit. Re-enable Forth in the loader.

Noticed by: dcs
Approved by: jkh

Allow for cdldr to be built in ${.OBJDIR}/../cdldr/cdldr instead of
only looking for it in ${.CURDIR}/../cdldr/cdldr. This fixes world.

Add the new cdldr CD bootstrap loader. This patch includes the following:

- Fix btxldr to preserve a NULL bootinfo pointer when it copies the kernel
arguments.
- Add the cdldr bootstrap program. This program is tacked onto the
beginning of the standard 3rd stage boot loader (/boot/loader) to form
the CD boot loader (/boot/cdboot). When a CD is booted, the cdboot file
is copied into memory instead and executed. The cdldr stub emulates the
environment normally provided by boot2 and then starts the loader. This
booting method does not emulate a floppy drive, but boots directly off of
the CD. This should fix the problems some BIOS's have with emulating a
2.88 MB floppy image.
- Add support to the loader to recognize that it has been booted by cdldr
instead of boot2 and use a simpler method of extracting the BIOS boot
device.

Add machine-specific include path to ficl's sysdep.h. Wishes I had
gone to bed earlier.

Pointed by: peter

$Id$ -> $FreeBSD$

Reconcile all the loader newvers.sh's into one common one.

Move loader.conf.5, while it is still in it's first revision.

Add loader.4th man page (worst man page I ever wrote -- reviews
are welcomed). Correct a nasty bug in loader.4th before anyone
notices, add a couple of features.

Installs a default loader.rc if none exists. Document loader.conf.

The man page, version 0.1.

Install new loader.rc stuff.

Don't try protecting page 0; it seems that BIOS writers now feel it's
appropriate to check for Windows95 by polling for state in low
memory, with fatal results.

Submitted by: rnordier@freebsd.org

Transition from using Perl to using awk for our text-manipulation
needs. This removes the dependancy on Perl for the generation of the
loader, allowing the world to be built on a perl-free system.

Submitted by: Joe Abley <jabley@clear.co.nz>

Preserve the previous loader as loader.old.

Note no matching commit for the Alpha, as the alpha boot0 stage does
not have the ability to prompt for user input.

PR: kern/9406
Submitted by: "Daniel C. Sobral" <dcs@newsguy.com>

Disable kzipping the loader; it seems to be breaking the aout-to-elf build

Explicitly look for kzip in /usr/bin, again this is a stopgap, to avoid
making kzip a build tool.

kzip the loader, this shrinks it to about 60% of its original size.
Note that this is a stopgap with dependancies on the a.out tools.

Restore dependancy to build loader.help here

Reenable generation of the loader.help file

Disable build/install of boot.help until we sort out how to construct it
in the makeworld environment.

Build the composite help file from the generic and architecture-specific
help files, sorting topics and subtopics to allow maximum flexibility.

bootforth seems to be working well enough for me and others to turn
on by default. If it causes trouble, it's very easy to switch off again.

Turn off -g accidentally left in from testing.

Respect ${.OBJDIR} properly when looking for libficl.a

Add required parts for BootForth building (currently disabled and
untested). Only suitable for i386 at the moment, as we are missing
setjmp/longjmp on the Alpha.

Clean the ${BASE}.sym file as well.

Add a dependancy on the BTX crt0 object
Add the biospnp handler to the pnp handler array
Drop some old debugging code

- Enable PnP and ISA PnP code.
- Use the ISA PnP enumerator.
- Use the new linker set code, throw out the gensetdefs stuff.
- Produce an intermediate loader image that has symbols stripped, to aid
- in debugging.
- Supply ISA port access functions required for ISA PnP

Try and get the sys/* and machine/* includes via relative paths. This
saves having to do a 'make includes' after touching any header file for
the boot code.

Use rather than for linking. This allows the new rather
than stale version of libstand.a to be found.

After this change, the new boot code is apparently building correctly
in a make world.

Enable the DOS filesystem. NOTE: you will have to rebuild libstand in
order to be able to build again.

Override STRIP so installation doesn't try to strip the loader.

Make 'make install' do something that might be useful.

Recover the arguments passed in from the previous load stage, use them to set
the default console.
Print malloc stats from the new libstand allocator.

Make these compile when there is an obj dir.

Make libstand movable.

This completes the basic work required to make the loader work with BTX. We
now have a third-stage bootstrap shared by the i386 and Alpha.

Enable the biosdisk driver, duplicate -lstand as it both calls and is called
by the i386 platform library.

Initial integration of the i386 bootloader and BTX.

- Discard large amounts of BIOS-related code in favour of the more compact
BTX vm86 interface.
- Build the loader module as ELF, although the resulting object is a.out,
make gensetdefs 32/64-bit sensitive and use a single copy of it.
- Throw away installboot, as it's no longer required.
- Use direct bcopy operations in the i386_copy module, as BTX
maps the first 16M of memory. Check operations against the
detected size of actual memory.

Resynch with working sources before BTX integration.

- Use format-independant module allocator.
- Conditionalise ISA PnP support.
- Simplify PnP enumerator interface.
- Improve module/object searching.
- Add missing depend/install targets in BTX makefiles.
- Pass the kernel environment and module data in extended bootinfo fields.
- Add a pointer to the end of the kernel + modules in bootinfo.
- Fix parsing of old-style kernel arguments.

This commit was generated by cvs2svn to compensate for changes in r38465,
which included commits to RCS files with non-trunk default branches.

This is the new unified bootstrap, sometimes known previously as the
'three-stage' bootstrap.
There are a number of caveats with the code in its current state:
- The i386 bootstrap only supports booting from a floppy.
- The kernel and kld do not yet know how to deal with the extended
information and module summary passed in.
- PnP-based autodetection and demand loading of modules is not implemented.
- i386 ELF kernel loading is not ready yet.
- The i386 bootstrap is loaded via an ugly blockmap.

On the alpha, both net- and disk-booting (SRM console machines only) is
supported. No blockmaps are used by this code.

Obtained from: Parts from the NetBSD/i386 standalone bootstrap.