Copy stable/10@r272459 to releng/10.1 as part of
the 10.1-RELEASE process.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC 266621: Eliminte spurious interrupts caused by ARM weak memory ordering.

MFC r257738, r259202, r258410, r260288, r260292, r260294, r260320, r260323,
r260326, r260327, r260331, r260333, r260340, r260371, r260372, r260373,
r260374, r260375

Add common bus_space tag definition shared for most supported ARMv6/v7 SoCs.
Correct license statements to reflect the fact that these files were all
derived from sys/arm/mv/bus_space.c.

In pmap_unmapdev(), remember the size, and use that as an argument to
kva_free(), or we'd end up always passing it a size of 0

In pmap_mapdev(), first check whether a static mapping exists,

Convert TI static device mapping to use the new arm_devmap_add_entry(),

Use the common armv6 fdt_bus_tag defintion for tegra instead of a local copy.

Eliminate use of fdt_immr_addr(), it's not needed for tegra

Convert lpc from using fdt_immr style to arm_devmap_add_entry() to make
static device mappings.

Retire machine/fdt.h as a header used by MI code, as its function is now
obsolete. This involves the following pieces:
- Remove it entirely on PowerPC, where it is not used by MD code either
- Remove all references to machine/fdt.h in non-architecture-specific code
(aside from uart_cpu_fdt.c, shared by ARM and MIPS, and so is somewhat
non-arch-specific).
- Fix code relying on header pollution from machine/fdt.h includes
- Legacy fdtbus.c (still used on x86 FDT systems) now passes resource
requests to its parent (nexus). This allows x86 FDT devices to allocate
both memory and IO requests and removes the last notionally MI use of
fdtbus_bs_tag.
- On those architectures that retain a machine/fdt.h, unused bits like
FDT_MAP_IRQ and FDT_INTR_MAX have been removed.

Add #include <machine/fdt.h> to a few files that used to get it via pollution

Enable the mv cesa security/crypto device by providing the required property
in the dts source, and adding the right devices to the kernel config.

Remove dev/fdt/fdt_pci.c, which was code specific to Marvell ARM SoCs,
related to setting up static device mappings. Since it was only used by
arm/mv/mv_pci.c, it's now just static functions within that file, plus
one public function that gets called only from arm/mv/mv_machdep.c.

Switch RPi to using arm_devmap_add_entry() to set up static device mapping.

Allow 'no static device mappings' to potentially work.

Don't try to find a static mapping before calling pmap_mapdev(), that logic
is now part of pmap_mapdev() and doesn't need to be duplicated here.

Switch a10 to using arm_devmap_add_entry() to set up static device mapping.

MFC r260161, r260163, r260165, r260166, r260189

Add polarity and level support to ARM GIC

Do not attach to PCI bridges in AHCI driver

Use only mapped BIOs on ARM

Fix race condition in DELAY for SP804 timer.

MFC r258359, r258742, r258845, r259936, r259640

Apply access flags for managed and unmanaged pages properly on ARMv6/v7

Set the PGA_WRITEABLE flag when the protections indicate write access, not
just when the current access is a write.

Enable missing Access Flag for secondary cores on ARMv6/v7

Add identification and necessary type checks for Krait CPU cores.

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Bump max number of IRQs for Cortex-Ax family to cover Exynos5 requirement.

Submitted by: Ruslan Bukin <br@bsdpad.com>

Eliminate the need for an intermediate array of indices into the arrays of
interrupt counts and names, by making the names into an array of fixed-length
strings that can be directly indexed. This eliminates extra memory accesses
on every interrupt to increment the counts.

As a side effect, it also fixes a bug that would corrupt the names data
if a name was longer than MAXCOMLEN, which led to incorrect vmstat -i output.

Approved by: cognet (mentor)

Replace generic ARM11 option with more specific
support for ARM1136 and ARM1176

Submitted by: Daisuke Aoyama <aoyama at peach.ne.jp>
Obtained from: NetBSD

Add support for MSI in interrupt controlller.

MSI are implemented via software interrupt. PCIe cards will write
into software interrupt register which will cause inbound shared
interrupt which will be interpreted as a MSI.

Obtained from: Marvell, Semihalf

Add support for Armada XP A0.

- Add functions to calculate clocks instead using hardcoded values
- Update reset and timers functions
- Update number of interrupts
- Change name of platform from db88f78100 to db78460
- Correct DRAM size and PCI IRQ routing in dts file.

Obtained from: Semihalf

ARM11 might have more then 32 interrupts, e.g. BCM2835: 72 interrupts

Merging projects/armv6, part 1

Cummulative patch of changes that are not vendor-specific:
- ARMv6 and ARMv7 architecture support
- ARM SMP support
- VFP/Neon support
- ARM Generic Interrupt Controller driver
- Simplification of startup code for all platforms

trim trailing whitespace

Pass the previously returned IRQ back to arm_get_next_irq() so that
the implementation can guarantee forward progress in the event of
a stuck interrupt or interrupt storm. This is especially critical
for fast interrupt handlers, as they can cause a hard hang in that
case. When first called, arm_get_next_irq() is passed -1.

Obtained from: Juniper Networks, Inc.

Merge support for Gateworks Cambria boards:
o add support for IXP435 cpu's (e.g. 64 irq's)
o add support for Cambria-specific devices: npe, led's (front panel and
octal latch), ehci, mcu, ide cf
o redo memory mapping for xscale/ixp4xx boards: previously memory
was assumed aliased to 0x10000000 but this appears to be true only
for ixp425 systems and breaks operation on others; rework so memory
is assumed to start at 0
o rework NPE configuration support to use NPE id's instead of port #'s;
these changes also rename the associated MAC's to follow the NPE's
they are attached to
o update npe firmware to latest rev (same license) and update default fw
imageid's to match; in particular this adds NPE-A and crypto support
o re-style NPE fw handling code and add a console msg identifying the
attributes of the loaded fw
o fix numerous problems with handling failures during npe setup
o fix npe rx q setup; need to spin waiting for mailbox responses during
early boot stages as qmgr interrupts are not delivered; this fixes
the problem where all 8 traffic classifications were not tied to the
rx q (and eliminates the console msg "remember to fix rx q setup")
o add DELAY to npe MII wait logic for IXP435
o strip down builtin phys->virt address translation table in resource
handling to just those resources that require it and add a console msg
to alert people when this (kludge) table needs to be extended
o purge a bunch of dead netbsd-ism's
o cleanup avila led driver
o add Cambria support to boot2 and rework code for better multi-board support

Notes:
1. NPE-A doesn't work and causes NPE-C to stop working; it is disabled
in the hints
2. USB isn't working yet; controller communicates ok but device
discovery fails
3. Cambria support must be configured separately from IXP425 boards;
multi-board support is TBD

Sponsored by: Hobnob, Gateworks (board donation)
Reviewed by: imp

Introduce basic support for Marvell families of system-on-chip ARM devices:

* Orion
- 88F5181
- 88F5182
- 88F5281

* Kirkwood
- 88F6281

* Discovery
- MV78100

The above families of SOCs are built around CPU cores compliant with ARMv5TE
instruction set architecture definition. They share a number of integrated
peripherals. This commit brings support for the following basic elements:

* GPIO
* Interrupt controller
* L1, L2 cache
* Timers, watchdog, RTC
* TWSI (I2C)
* UART

Other peripherals drivers will be introduced separately.

Reviewed by: imp, marcel, stass (Thanks guys!)
Obtained from: Marvell, Semihalf

ARM interrupts improvements.

- Fix nexus_setup_intr() abuse of setting up multiple IRQs in one go. Calling
arm_setup_irqhandler() in loop is bogus, as there's just one cookie given
from the caller and it is overwritten in each iteration so that only the
last handler's cookie value prevails.

- Proper intr masking/unmasking handling: the IRQ source is masked at PIC level
only after the last handler has been removed from the list.

Reviewed by: cognet, imp, sam, stass
Obtained from: Grzegorz Bernacki gjb ! semihalf dot com

Support for the XScale PXA255 SoC as found on the Gumstix Basix and Connex
boards. This is enough to net-boot to multiuser.

Also supported is the SMSC LAN91C111 parts used on the netCF, netDUO and netMMC
add-on boards.

I'll be putting some instructions on how to boot this on the Gumstix boards
online soon.

This is still fairly rough and will be refined over time but I felt it was
better to get this out there where other people can help out.

On the AT91, we need to write on the EOI register after we handle an
interrupt. So, add a new function pointer, arm_post_filter, which defaults
to NULL, and which will be used as the post_filter arg for
intr_event_create(). Set it properly for the AT91, so that it boots again.

Reported by: hps

The iop34x has 128 interrupts.

o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@

- MFp4: modify slightly the arm intr API, there's arm CPUs with more than 32
interrupts.
- Implement teardown methods where appropriate.

Define NIRQ to 64 for CPU_ARM9, because Cirrus Logic EP93XX cores provides
64 irqs.
This should be re-thought later.

Start all license statements with /*-

Add new functions to know which irqs are pending, and to mask and unmask
interrupts, as these are CPU specific.
If the interrupt handler is not marked as INTR_FAST, don't unmask the
interrupt until it as been serviced.

Import FreeBSD/arm kernel bits.
It only supports sa1110 (on simics) right now, but xscale support should come
soon.
Some of the initial work has been provided by :
Stephane Potvin <sepotvin at videotron.ca>
Most of this comes from NetBSD.