#
272461 |
|
02-Oct-2014 |
gjb |
Copy stable/10@r272459 to releng/10.1 as part of the 10.1-RELEASE process.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
266383 |
|
17-May-2014 |
ian |
MFC 265155, 265254:
Omit from the universe build all config files tagged with #NO_UNIVERSE.
Add FDT to the VYBRID kernel.
|
#
266331 |
|
17-May-2014 |
ian |
MFC 263301
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
|
#
266328 |
|
17-May-2014 |
ian |
MFC 263245: Make all the comments '# ' and align to same column.
|
#
266277 |
|
16-May-2014 |
ian |
MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924, 262925, 262929, 262932, 262935, 262940, 262941, 262942, 262948, 262949, 262950
Strip arm/conf/DEFAULTS down to just items that are mandatory for running the architecture.
Move all the files named foo/common.c to foo/foo_common.c
Initial cut for DTS on the hl201 board.
Add commented out dts for sam9260ek as well as early printf support.
Make clock optional on uart nodes, then back it out ("I don't know what I was thinking, but it is lame.")
Set the baud rate if it isn't 0
Make at91_soc_id() public.
Properly round at91 resource on unmapping.
Move AT91 AIC related stuff to own file.
Fix another bug in multicast filtering. i.MX uses 6 bits from MSB in LE CRC32 for the hash value, not the lowest 6 bits in BE CRC32.
Follow r262916 with one more config file that references a renamed common.c
Remove bogus AT91 define that causes compile errors. Most of the defines for SAM9X are going away soonish anyway (once FDT works), but until then...
Remove all dregs of a per-thread undefined-exception-mode stack.
Rework the VFP code that handles demand-based save and restore of state.
Always call vfp_discard() on thread death.
When a thread begins life it doesn't own the VFP hardware state on any cpu.
Make undefined exception entry MP-safe.
|
#
266162 |
|
15-May-2014 |
ian |
MFC r261570, r261572
Revert r260440 (add USB_HOST_ALIGN to all configs, it's only needed for platforms with a 64-byte cacheline size).
Add option USB_HOST_ALIGN=64 for all SoCs that have 64 byte cache lines.
|
#
266095 |
|
14-May-2014 |
ian |
MFC r261083, r261092, r261126, r261127, r261128, r261129, r261130, r261131
Add Atmel serial drivers.
uart clock-frequency is a FreeBSD-specific extention. Make it optional and allow the client uart drivers to decide if a frequency is required.
Remove redundant declaration for uart devclass. Commit some unrelated, but harmless, FDT ifdefs.
Add at91 NAND support, Fix comment.
Remove obsolete options and fix comments
|
#
266086 |
|
14-May-2014 |
ian |
MFC r260440, r260441, r260447, r260490, r260493
Add option USB_HOST_ALIGN to configs that contain 'device usb'.
Update dts files of Cubieboard1,2 to use 1GB memory.
Add a function to print the contents of the static device mapping table,
|
#
256281 |
|
10-Oct-2013 |
gjb |
Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
#
253845 |
|
31-Jul-2013 |
obrien |
Back out r253779 & r253786.
|
#
253779 |
|
29-Jul-2013 |
obrien |
Decouple yarrow from random(4) device.
* Make Yarrow an optional kernel component -- enabled by "YARROW_RNG" option. The files sha2.c, hash.c, randomdev_soft.c and yarrow.c comprise yarrow.
* random(4) device doesn't really depend on rijndael-*. Yarrow, however, does.
* Add random_adaptors.[ch] which is basically a store of random_adaptor's. random_adaptor is basically an adapter that plugs in to random(4). random_adaptor can only be plugged in to random(4) very early in bootup. Unplugging random_adaptor from random(4) is not supported, and is probably a bad idea anyway, due to potential loss of entropy pools. We currently have 3 random_adaptors: + yarrow + rdrand (ivy.c) + nehemeiah
* Remove platform dependent logic from probe.c, and move it into corresponding registration routines of each random_adaptor provider. probe.c doesn't do anything other than picking a specific random_adaptor from a list of registered ones.
* If the kernel doesn't have any random_adaptor adapters present then the creation of /dev/random is postponed until next random_adaptor is kldload'ed.
* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a system wide one.
Submitted by: arthurmesh@gmail.com, obrien Obtained from: Juniper Networks Reviewed by: obrien
|
#
236988 |
|
13-Jun-2012 |
imp |
Strip trailing whitespace.
|
#
233271 |
|
21-Mar-2012 |
ed |
Remove pty(4) from our kernel configurations.
As of FreeBSD 8, this driver should not be used. Applications that use posix_openpt(2) and openpty(3) use the pts(4) that is built into the kernel unconditionally. If it turns out high profile depend on the pty(4) module anyway, I'd rather get those fixed. So please report any issues to me.
The pty(4) module is still available as a kernel module of course, so a simple `kldload pty' can be used to run old-style pseudo-terminals.
|
#
225482 |
|
11-Sep-2011 |
brueffer |
Fix a zyd(4) comment typo that was copy+pasted into most kernel config files.
PR: 160276 Submitted by: MATSUMIYA Ryo <matsumiya@mma.club.uec.ac.jp> Approved by: re (kib) MFC after: 1 week
|
#
224699 |
|
07-Aug-2011 |
rmacklem |
Change all the sample kernel configurations to use NFSCL, NFSD instead of NFSCLIENT, NFSSERVER since NFSCL and NFSD are now the defaults. The client change is needed for diskless configurations, so that the root mount works for fstype nfs. Reported by seanbru at yahoo-inc.com for i386/XEN.
Approved by: re (hrs)
|
#
207077 |
|
22-Apr-2010 |
thompsa |
Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had the illusion of a tunable setting but was always turned on regardless.
MFC after: 1 week
|
#
204280 |
|
24-Feb-2010 |
brucec |
Update the commented out option for omitting the sysctl descriptions; it was committed as NO_SYSCTL_DESCR.
Approved by: rrs (mentor)
|
#
203938 |
|
15-Feb-2010 |
attilio |
Adjust style (following the already existing rules) for the newly introduced option DEADLKRES.
Reported by: danfe, julian, avg
|
#
203758 |
|
10-Feb-2010 |
attilio |
Add the options DEADLKRES (introducing the deadlock resolver thread) in the 'debugging' section of any HEAD kernel and enable for the mainstream ones, excluding the embedded architectures. It may, of course, enabled on a case-by-case basis.
Sponsored by: Sandvine Incorporated Requested by: emaste Discussed with: kib
|
#
198044 |
|
13-Oct-2009 |
jhb |
Sync with other GENERIC kernel configs: - Move USB serial drivers earlier to match their placement in other kernel configs. - Add descriptions to various USB drivers. - Move the USB wireless drivers into a new section. - Add ulscom to the list of USB serial drivers.
|
#
191954 |
|
09-May-2009 |
kuriyama |
- Use "device\t" and "options \t" for consistency.
|
#
190100 |
|
19-Mar-2009 |
thompsa |
Remove the uscanner(4) driver, this follows the removal of the kernel scanner driver in Linux 2.6. uscanner was just a simple wrapper around a fifo and contained no logic, the default interface is now libusb (supported by sane).
Reviewed by: HPS
|
#
188944 |
|
23-Feb-2009 |
thompsa |
Change over the usb kernel options to the new stack (retaining existing naming). The old usb stack can be compiled in my prefixing the name with 'o'.
|
#
186525 |
|
27-Dec-2008 |
bz |
In additions to the configs from r185478, which also enabled the use of modules for arm, disable them by adding MODULES_OVERRIDE="" here as well.
Reviewed by: sam MFC after: 3 weeks
|
#
185307 |
|
25-Nov-2008 |
imp |
Convert BWCT and HL200 over to new board mechanism as well. The TSC4370 config file wasn't committed to this tree, so I don't know if my changes will work on it or not.
|
#
184193 |
|
23-Oct-2008 |
marcel |
Add arm/conf/DEFAULTS and populate it with: machine arm device mem options GEOM_BSD options GEOM_MBR
Remove the first two from all kernel configuration files and change geom_bsd and geom_mbr from standard to optional.
|
#
178372 |
|
21-Apr-2008 |
phk |
Make genclock standard on all platforms.
Thanks to: grehan & marcel for platform support on ia64 and ppc.
|
#
178354 |
|
20-Apr-2008 |
sam |
Multi-bss (aka vap) support for 802.11 devices.
Note this includes changes to all drivers and moves some device firmware loading to use firmware(9) and a separate module (e.g. ral). Also there no longer are separate wlan_scan* modules; this functionality is now bundled into the wlan module.
Supported by: Hobnob and Marvell Reviewed by: many Obtained from: Atheros (some bits)
|
#
177662 |
|
27-Mar-2008 |
dfr |
Add kernel module support for nfslockd and krpc. Use the module system to detect (or load) kernel NLM support in rpc.lockd. Remove the '-k' option to rpc.lockd and make kernel NLM the default. A user can still force the use of the old user NLM by building a kernel without NFSLOCKD and/or removing the nfslockd.ko module.
|
#
174172 |
|
02-Dec-2007 |
cognet |
Cleanup : make nexus standard, as it is mandatory anyway. Garbage-collect unused nexus_io.c and nexus_io_asm.S
Submitted by: Rafal Jaworowski <raj AT semihalf DOT com>
|
#
173696 |
|
17-Nov-2007 |
cognet |
Add a kernel config file for the Hot-e HL200 (AT91RM92 based). Many thanks to John Nicholls from Thinklinx for sending sample hardware.
|