Copy stable/10@r272459 to releng/10.1 as part of
the 10.1-RELEASE process.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC 265155, 265254:

Omit from the universe build all config files tagged with #NO_UNIVERSE.

Add FDT to the VYBRID kernel.

MFC 263301

In kernel config files, it is supposed to be 'options<space><tab>' not
'options<tab><tab>', per long standing (but recently not so strictly
enforced) convention.

MFC 263245: Make all the comments '# ' and align to same column.

MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924,
262925, 262929, 262932, 262935, 262940, 262941, 262942, 262948, 262949,
262950

Strip arm/conf/DEFAULTS down to just items that are mandatory for running
the architecture.

Move all the files named foo/common.c to foo/foo_common.c

Initial cut for DTS on the hl201 board.

Add commented out dts for sam9260ek as well as early printf support.

Make clock optional on uart nodes, then back it out ("I don't know what I
was thinking, but it is lame.")

Set the baud rate if it isn't 0

Make at91_soc_id() public.

Properly round at91 resource on unmapping.

Move AT91 AIC related stuff to own file.

Fix another bug in multicast filtering. i.MX uses 6 bits from MSB in
LE CRC32 for the hash value, not the lowest 6 bits in BE CRC32.

Follow r262916 with one more config file that references a renamed common.c

Remove bogus AT91 define that causes compile errors. Most of the defines
for SAM9X are going away soonish anyway (once FDT works), but until
then...

Remove all dregs of a per-thread undefined-exception-mode stack.

Rework the VFP code that handles demand-based save and restore of state.

Always call vfp_discard() on thread death.

When a thread begins life it doesn't own the VFP hardware state on any cpu.

Make undefined exception entry MP-safe.

MFC r261570, r261572

Revert r260440 (add USB_HOST_ALIGN to all configs, it's only needed for
platforms with a 64-byte cacheline size).

Add option USB_HOST_ALIGN=64 for all SoCs that have 64 byte cache lines.

MFC r261083, r261092, r261126, r261127, r261128, r261129, r261130, r261131

Add Atmel serial drivers.

uart clock-frequency is a FreeBSD-specific extention. Make it optional and
allow the client uart drivers to decide if a frequency is required.

Remove redundant declaration for uart devclass.
Commit some unrelated, but harmless, FDT ifdefs.

Add at91 NAND support, Fix comment.

Remove obsolete options and fix comments

MFC r260440, r260441, r260447, r260490, r260493

Add option USB_HOST_ALIGN to configs that contain 'device usb'.

Update dts files of Cubieboard1,2 to use 1GB memory.

Add a function to print the contents of the static device mapping table,

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Back out r253779 & r253786.

Decouple yarrow from random(4) device.

* Make Yarrow an optional kernel component -- enabled by "YARROW_RNG" option.
The files sha2.c, hash.c, randomdev_soft.c and yarrow.c comprise yarrow.

* random(4) device doesn't really depend on rijndael-*. Yarrow, however, does.

* Add random_adaptors.[ch] which is basically a store of random_adaptor's.
random_adaptor is basically an adapter that plugs in to random(4).
random_adaptor can only be plugged in to random(4) very early in bootup.
Unplugging random_adaptor from random(4) is not supported, and is probably a
bad idea anyway, due to potential loss of entropy pools.
We currently have 3 random_adaptors:
+ yarrow
+ rdrand (ivy.c)
+ nehemeiah

* Remove platform dependent logic from probe.c, and move it into
corresponding registration routines of each random_adaptor provider.
probe.c doesn't do anything other than picking a specific random_adaptor
from a list of registered ones.

* If the kernel doesn't have any random_adaptor adapters present then the
creation of /dev/random is postponed until next random_adaptor is kldload'ed.

* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a
system wide one.

Submitted by: arthurmesh@gmail.com, obrien
Obtained from: Juniper Networks
Reviewed by: obrien

These options are unused, and can safely be retired.

This hints file doesn't actually do anything, and besides it is commented
out here. Remove it.

Strip trailing whitespace.

Remove pty(4) from our kernel configurations.

As of FreeBSD 8, this driver should not be used. Applications that use
posix_openpt(2) and openpty(3) use the pts(4) that is built into the
kernel unconditionally. If it turns out high profile depend on the
pty(4) module anyway, I'd rather get those fixed. So please report any
issues to me.

The pty(4) module is still available as a kernel module of course, so a
simple `kldload pty' can be used to run old-style pseudo-terminals.

Change all the sample kernel configurations to use
NFSCL, NFSD instead of NFSCLIENT, NFSSERVER since
NFSCL and NFSD are now the defaults. The client change is
needed for diskless configurations, so that the root
mount works for fstype nfs.
Reported by seanbru at yahoo-inc.com for i386/XEN.

Approved by: re (hrs)

Update the commented out option for omitting the sysctl descriptions; it
was committed as NO_SYSCTL_DESCR.

Approved by: rrs (mentor)

Adjust style (following the already existing rules) for the newly
introduced option DEADLKRES.

Reported by: danfe, julian, avg

Add the options DEADLKRES (introducing the deadlock resolver thread) in
the 'debugging' section of any HEAD kernel and enable for the mainstream
ones, excluding the embedded architectures.
It may, of course, enabled on a case-by-case basis.

Sponsored by: Sandvine Incorporated
Requested by: emaste
Discussed with: kib

- Use "device\t" and "options \t" for consistency.

minor cleanup

Change over the usb kernel options to the new stack (retaining existing
naming). The old usb stack can be compiled in my prefixing the name with 'o'.

enable use of modules but disable them by adding MODULES_OVERRIDE=""
in each config file until we can sort out issues in the modules tree

Reviewed by: imp
MFC after: 1 month

Convert BWCT and HL200 over to new board mechanism as well. The
TSC4370 config file wasn't committed to this tree, so I don't know if
my changes will work on it or not.

Add arm/conf/DEFAULTS and populate it with:
machine arm
device mem
options GEOM_BSD
options GEOM_MBR

Remove the first two from all kernel configuration files and
change geom_bsd and geom_mbr from standard to optional.

Make genclock standard on all platforms.

Thanks to: grehan & marcel for platform support on ia64 and ppc.

Add kernel module support for nfslockd and krpc. Use the module system
to detect (or load) kernel NLM support in rpc.lockd. Remove the '-k'
option to rpc.lockd and make kernel NLM the default. A user can still
force the use of the old user NLM by building a kernel without NFSLOCKD
and/or removing the nfslockd.ko module.

Cleanup : make nexus standard, as it is mandatory anyway.
Garbage-collect unused nexus_io.c and nexus_io_asm.S

Submitted by: Rafal Jaworowski <raj AT semihalf DOT com>

Hints are handled differently on -current
Don't include hints.at91rm9200 for now

MFp4: add BWCT kernel configuration