Copy stable/10@r272459 to releng/10.1 as part of
the 10.1-RELEASE process.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Change the cap_rights_t type from uint64_t to a structure that we can extend
in the future in a backward compatible (API and ABI) way.

The cap_rights_t represents capability rights. We used to use one bit to
represent one right, but we are running out of spare bits. Currently the new
structure provides place for 114 rights (so 50 more than the previous
cap_rights_t), but it is possible to grow the structure to hold at least 285
rights, although we can make it even larger if 285 rights won't be enough.

The structure definition looks like this:

struct cap_rights {
uint64_t cr_rights[CAP_RIGHTS_VERSION + 2];
};

The initial CAP_RIGHTS_VERSION is 0.

The top two bits in the first element of the cr_rights[] array contain total
number of elements in the array - 2. This means if those two bits are equal to
0, we have 2 array elements.

The top two bits in all remaining array elements should be 0.
The next five bits in all array elements contain array index. Only one bit is
used and bit position in this five-bits range defines array index. This means
there can be at most five array elements in the future.

To define new right the CAPRIGHT() macro must be used. The macro takes two
arguments - an array index and a bit to set, eg.

#define CAP_PDKILL CAPRIGHT(1, 0x0000000000000800ULL)

We still support aliases that combine few rights, but the rights have to belong
to the same array element, eg:

#define CAP_LOOKUP CAPRIGHT(0, 0x0000000000000400ULL)
#define CAP_FCHMOD CAPRIGHT(0, 0x0000000000002000ULL)

#define CAP_FCHMODAT (CAP_FCHMOD | CAP_LOOKUP)

There is new API to manage the new cap_rights_t structure:

cap_rights_t *cap_rights_init(cap_rights_t *rights, ...);
void cap_rights_set(cap_rights_t *rights, ...);
void cap_rights_clear(cap_rights_t *rights, ...);
bool cap_rights_is_set(const cap_rights_t *rights, ...);

bool cap_rights_is_valid(const cap_rights_t *rights);
void cap_rights_merge(cap_rights_t *dst, const cap_rights_t *src);
void cap_rights_remove(cap_rights_t *dst, const cap_rights_t *src);
bool cap_rights_contains(const cap_rights_t *big, const cap_rights_t *little);

Capability rights to the cap_rights_init(), cap_rights_set(),
cap_rights_clear() and cap_rights_is_set() functions are provided by
separating them with commas, eg:

cap_rights_t rights;

cap_rights_init(&rights, CAP_READ, CAP_WRITE, CAP_FSTAT);

There is no need to terminate the list of rights, as those functions are
actually macros that take care of the termination, eg:

#define cap_rights_set(rights, ...) \
__cap_rights_set((rights), __VA_ARGS__, 0ULL)
void __cap_rights_set(cap_rights_t *rights, ...);

Thanks to using one bit as an array index we can assert in those functions that
there are no two rights belonging to different array elements provided
together. For example this is illegal and will be detected, because CAP_LOOKUP
belongs to element 0 and CAP_PDKILL to element 1:

cap_rights_init(&rights, CAP_LOOKUP | CAP_PDKILL);

Providing several rights that belongs to the same array's element this way is
correct, but is not advised. It should only be used for aliases definition.

This commit also breaks compatibility with some existing Capsicum system calls,
but I see no other way to do that. This should be fine as Capsicum is still
experimental and this change is not going to 9.x.

Sponsored by: The FreeBSD Foundation

Similar to 233760 and 236717, export some more useful info about the
kernel-based POSIX semaphore descriptors to userland via procstat(1) and
fstat(1):
- Change sem file descriptors to track the pathname they are associated
with and add a ksem_info() method to copy the path out to a
caller-supplied buffer.
- Use the fo_stat() method of shared memory objects and ksem_info() to
export the path, mode, and value of a semaphore via struct kinfo_file.
- Add a struct semstat to the libprocstat(3) interface along with a
procstat_get_sem_info() to export the mode and value of a semaphore.
- Teach fstat about semaphores and to display their path, mode, and value.

MFC after: 2 weeks

Add procstat_getkstack function to dump kernel stacks of a process.

MFC after: 1 month

Add procstat_getauxv function to retrieve a process auxiliary vector.

MFC after: 1 month

Extend libprocstat with functions to retrieve process command line
arguments and environment variables.

Suggested by: stas
Reviewed by: jhb and stas (initial version)
MFC after: 1 month

Add procstat_getosrel function to retrieve a process osrel info.

MFC after: 1 month

Add procstat_getpathname function to retrieve a process executable.

MFC after: 1 month

Add procstat_getrlimit function to retrieve a process resource limits info.

MFC after: 1 month

Add procstat_getumask function to retrieve a process umask.

MFC after: 1 month

Add procstat_getgroups function to retrieve process groups.

MFC after: 1 month

Add procstat_getvmmap function to get VM layout of a process.

MFC after: 1 month

Make libprocstat(3) extract procstat notes from a process core file.

PR: kern/173723
Suggested by: jhb
Glanced by: kib
MFC after: 1 month

Merge Capsicum overhaul:

- Capability is no longer separate descriptor type. Now every descriptor
has set of its own capability rights.

- The cap_new(2) system call is left, but it is no longer documented and
should not be used in new code.

- The new syscall cap_rights_limit(2) should be used instead of
cap_new(2), which limits capability rights of the given descriptor
without creating a new one.

- The cap_getrights(2) syscall is renamed to cap_rights_get(2).

- If CAP_IOCTL capability right is present we can further reduce allowed
ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed
ioctls can be retrived with cap_ioctls_get(2) syscall.

- If CAP_FCNTL capability right is present we can further reduce fcntls
that can be used with the new cap_fcntls_limit(2) syscall and retrive
them with cap_fcntls_get(2).

- To support ioctl and fcntl white-listing the filedesc structure was
heavly modified.

- The audit subsystem, kdump and procstat tools were updated to
recognize new syscalls.

- Capability rights were revised and eventhough I tried hard to provide
backward API and ABI compatibility there are some incompatible changes
that are described in detail below:

CAP_CREATE old behaviour:
- Allow for openat(2)+O_CREAT.
- Allow for linkat(2).
- Allow for symlinkat(2).
CAP_CREATE new behaviour:
- Allow for openat(2)+O_CREAT.

Added CAP_LINKAT:
- Allow for linkat(2). ABI: Reuses CAP_RMDIR bit.
- Allow to be target for renameat(2).

Added CAP_SYMLINKAT:
- Allow for symlinkat(2).

Removed CAP_DELETE. Old behaviour:
- Allow for unlinkat(2) when removing non-directory object.
- Allow to be source for renameat(2).

Removed CAP_RMDIR. Old behaviour:
- Allow for unlinkat(2) when removing directory.

Added CAP_RENAMEAT:
- Required for source directory for the renameat(2) syscall.

Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR):
- Allow for unlinkat(2) on any object.
- Required if target of renameat(2) exists and will be removed by this
call.

Removed CAP_MAPEXEC.

CAP_MMAP old behaviour:
- Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and
PROT_WRITE.
CAP_MMAP new behaviour:
- Allow for mmap(2)+PROT_NONE.

Added CAP_MMAP_R:
- Allow for mmap(PROT_READ).
Added CAP_MMAP_W:
- Allow for mmap(PROT_WRITE).
Added CAP_MMAP_X:
- Allow for mmap(PROT_EXEC).
Added CAP_MMAP_RW:
- Allow for mmap(PROT_READ | PROT_WRITE).
Added CAP_MMAP_RX:
- Allow for mmap(PROT_READ | PROT_EXEC).
Added CAP_MMAP_WX:
- Allow for mmap(PROT_WRITE | PROT_EXEC).
Added CAP_MMAP_RWX:
- Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC).

Renamed CAP_MKDIR to CAP_MKDIRAT.
Renamed CAP_MKFIFO to CAP_MKFIFOAT.
Renamed CAP_MKNODE to CAP_MKNODEAT.

CAP_READ old behaviour:
- Allow pread(2).
- Disallow read(2), readv(2) (if there is no CAP_SEEK).
CAP_READ new behaviour:
- Allow read(2), readv(2).
- Disallow pread(2) (CAP_SEEK was also required).

CAP_WRITE old behaviour:
- Allow pwrite(2).
- Disallow write(2), writev(2) (if there is no CAP_SEEK).
CAP_WRITE new behaviour:
- Allow write(2), writev(2).
- Disallow pwrite(2) (CAP_SEEK was also required).

Added convinient defines:

#define CAP_PREAD (CAP_SEEK | CAP_READ)
#define CAP_PWRITE (CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ)
#define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL)
#define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W)
#define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X)
#define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X)
#define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X)
#define CAP_RECV CAP_READ
#define CAP_SEND CAP_WRITE

#define CAP_SOCK_CLIENT \
(CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \
CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN)
#define CAP_SOCK_SERVER \
(CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \
CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \
CAP_SETSOCKOPT | CAP_SHUTDOWN)

Added defines for backward API compatibility:

#define CAP_MAPEXEC CAP_MMAP_X
#define CAP_DELETE CAP_UNLINKAT
#define CAP_MKDIR CAP_MKDIRAT
#define CAP_RMDIR CAP_UNLINKAT
#define CAP_MKFIFO CAP_MKFIFOAT
#define CAP_MKNOD CAP_MKNODAT
#define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER)

Sponsored by: The FreeBSD Foundation
Reviewed by: Christoph Mallon <christoph.mallon@gmx.de>
Many aspects discussed with: rwatson, benl, jonathan
ABI compatibility discussed with: kib

Add __BEGIN_DECLS and __END_DECLS to make libprocstat more C++-friendly.

Submitted by: Daniel Dettlaff <dmilith gmail com>
MFC after: 1 week

Export some more useful info about shared memory objects to userland
via procstat(1) and fstat(1):
- Change shm file descriptors to track the pathname they are associated
with and add a shm_path() method to copy the path out to a caller-supplied
buffer.
- Use the fo_stat() method of shared memory objects and shm_path() to
export the path, mode, and size of a shared memory object via
struct kinfo_file.
- Add a struct shmstat to the libprocstat(3) interface along with a
procstat_get_shm_info() to export the mode and size of a shared memory
object.
- Change procstat to always print out the path for a given object if it
is valid.
- Teach fstat about shared memory objects and to display their path,
mode, and size.

MFC after: 2 weeks

Updates to libprocstat(3) and procstat(1) to allow monitoring Capsicum
capability mode and capabilities.

Right now no attempt is made to unwrap capabilities when operating on
a crashdump, so further refinement is required.

Approved by: re (bz)
Sponsored by: Google Inc

- Commit work from libprocstat project. These patches add support for runtime
file and processes information retrieval from the running kernel via sysctl
in the form of new library, libprocstat. The library also supports KVM backend
for analyzing memory crash dumps. Both procstat(1) and fstat(1) utilities have
been modified to take advantage of the library (as the bonus point the fstat(1)
utility no longer need superuser privileges to operate), and the procstat(1)
utility is now able to display information from memory dumps as well.

The newly introduced fuser(1) utility also uses this library and able to operate
via sysctl and kvm backends.

The library is by no means complete (e.g. KVM backend is missing vnode name
resolution routines, and there're no manpages for the library itself) so I
plan to improve it further. I'm commiting it so it will get wider exposure
and review.

We won't be able to MFC this work as it relies on changes in HEAD, which
was introduced some time ago, that break kernel ABI. OTOH we may be able
to merge the library with KVM backend if we really need it there.

Discussed with: rwatson