- Copy stable/10 (r259064) to releng/10.0 as part of the
10.0-RELEASE cycle.
- Update __FreeBSD_version [1]
- Set branch name to -RC1

[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so
start releng/10.0 at '100' so the branch is started with
a value ending in zero.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Implement some initial AR934x support routines.

This code reads the PLL configuration registers and correctly programs
things so the UART and such can come up.

There's MIPS74k platform issues that need fixing; but this at least brings
things up enough to echo stuff out the serial port and allow for interactive
debugging with ddb.

Tested:

* AR71xx SoCs
* AR933x SoC
* AR9344 board (DB120)

Obtained from: Qualcomm Atheros; Linux/OpenWRT

* Add AR9330/AR9331 to the soc identifier enum;
* Set it when probing the CPU type.

Tie in the AR933x support into -HEAD.

Remove duplicate header includes

Fix mistaken indenting.

Add some initial AR724X chipset support.

This is untested but should at least allow an AR724X to boot.

The current code is lacking the detail needed to expose the PCIe bus.
It is also lacking any NIC, PLL or flush/WB code.

Add initial Atheros AR91XX support.

This works well enough to bring a system up to single-user mode
using an MDROOT.

Known Issues:

* The EHCI USB doesn't currently work and will panic the kernel during
attach.
* The onboard ethernet won't work until the PLL routines have been
fleshed out and shoe-horned into if_arge.
* The WMAC device glue (and quite likely the if_ath support)
hasn't yet been implemented.

Preparation work for supporting the AR91xx and AR724x.

* Implement a SoC probe function, from Linux, which determines the
SoC family, type and revision. This only probes the AR71xx series
SoC and (currently) panics on others.

* Migrate some of the AR71XX specific hardware init (USB device, determining
system frequencies) into using the cpuops introduced in an earlier commit.
Other SoC specific hardware stuff (per-device flush/WB, GPIO pin wiring,
Ethernet PLL setup, other things I've likely missed) will be introduced in
subsequent commits.

Reviewed by: imp@
Obtained from: (partially) Linux