#
259065 |
|
07-Dec-2013 |
gjb |
- Copy stable/10 (r259064) to releng/10.0 as part of the 10.0-RELEASE cycle. - Update __FreeBSD_version [1] - Set branch name to -RC1
[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so start releng/10.0 at '100' so the branch is started with a value ending in zero.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
256281 |
|
10-Oct-2013 |
gjb |
Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
#
253506 |
|
20-Jul-2013 |
rmacklem |
The NFSv4 server incorrectly assumed that the high order words of the attribute bitmap argument would be non-zero. This caused an interoperability problem for a recent patch to the Linux NFSv4 client. The Linux folks have changed their patch to avoid this, but this patch fixes the problem on the server.
Reported and tested by: Andre Heider (a.heider@gmail.com) MFC after: 3 days
|
#
249592 |
|
17-Apr-2013 |
ken |
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server.
The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support.
This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching.
The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed.
This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order.
In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code.
This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time.
I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS.
The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another.
sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built.
sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode.
sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs.
sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro.
sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call.
sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code.
Add the malloc flag argument to newnfs_realign().
Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code.
sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type.
sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE.
sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc.
There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before.
In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module.
In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused.
The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread.
The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread.
Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc.
Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread.
Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage.
Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons.
nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them.
Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread.
sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the
The shims contain all of the code and definitions that are specific to the NFS servers.
They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables.
sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign().
sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c.
sys/modules/nfsserver/Makefile: Add nfs_fha_old.c.
Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
|
#
246213 |
|
01-Feb-2013 |
kib |
Assert that the mbuf in the chain has sane length. Proper place for this check is somewhere in the network code, but this assertion already proven to be useful in catching what seems to be driver bugs causing NFS scrambling random memory.
Discussed with: rmacklem MFC after: 1 week
|
#
245508 |
|
16-Jan-2013 |
jhb |
Use the VA_UTIMES_NULL flag to detect when NULL was passed to utimes() instead of comparing the desired time against the current time as a heuristic.
Reviewed by: rmacklem MFC after: 1 week
|
#
244042 |
|
08-Dec-2012 |
rmacklem |
Move the NFSv4.1 client patches over from projects/nfsv4.1-client to head. I don't think the NFS client behaviour will change unless the new "minorversion=1" mount option is used. It includes basic NFSv4.1 support plus support for pNFS using the Files Layout only. All problems detecting during an NFSv4.1 Bakeathon testing event in June 2012 have been resolved in this code and it has been tested against the NFSv4.1 server available to me. Although not reviewed, I believe that kib@ has looked at it.
|
#
243882 |
|
05-Dec-2012 |
glebius |
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys.
Exceptions:
- sys/contrib not touched - sys/mbuf.h edited manually
|
#
240720 |
|
20-Sep-2012 |
rmacklem |
Modify the NFSv4 client so that it can handle owner and owner_group strings that consist entirely of digits, interpreting them as the uid/gid number. This change was needed since new (>= 3.3) Linux servers reply with these strings by default. This change is mandated by the rfc3530bis draft. Reported on freebsd-stable@ under the Subject heading "Problem with Linux >= 3.3 as NFSv4 server" by Norbert Aschendorff on Aug. 20, 2012.
Tested by: norbert.aschendorff at yahoo.de Reviewed by: jhb MFC after: 2 weeks
|
#
229802 |
|
08-Jan-2012 |
rmacklem |
opt_inet6.h was missing from some files in the new NFS subsystem. The effect of this was, for clients mounted via inet6 addresses, that the DRC cache would never have a hit in the server. It also broke NFSv4 callbacks when an inet6 address was the only one available in the client. This patch fixes the above, plus deletes opt_inet6.h from a couple of files it is not needed for.
MFC after: 2 weeks
|
#
224121 |
|
17-Jul-2011 |
zack |
Revert revision 224079 as Rick pointed out that I would be calling VOP_PATHCONF without the vnode lock held.
Implicitly approved by: zml (mentor)
|
#
224086 |
|
16-Jul-2011 |
zack |
Add DEXITCODE plumbing to NFS.
Isilon has the concept of an in-memory exit-code ring that saves the last exit code of a function and allows for stack tracing. This is very helpful when debugging tough issues.
This patch is essentially a no-op for BSD at this point, until we upstream the dexitcode logic itself. The patch adds DEXITCODE calls to every NFS function that returns an errno error code. A number of code paths were also reorganized to have single exit paths, to reduce code duplication.
Submitted by: David Kwan <dkwan@isilon.com> Reviewed by: rmacklem Approved by: zml (mentor) MFC after: 2 weeks
|
#
224082 |
|
16-Jul-2011 |
zack |
Simple find/replace of VOP_UNLOCK -> NFSVOPUNLOCK. This is done so that NFSVOPUNLOCK can be modified later to add enhanced logging and assertions.
Reviewed by: rmacklem Approved by: zml (mentor) MFC after: 2 weeks
|
#
224081 |
|
16-Jul-2011 |
zack |
Simple find/replace of vn_lock -> NFSVOPLOCK. This is done so that NFSVOPLOCK can be modified later to add enhanced logging and assertions.
Reviewed by: rmacklem Approved by: zml (mentor) MFC after: 2 weeks
|
#
224079 |
|
16-Jul-2011 |
zack |
Change loadattr and fillattr to ask the file system for the pathconf variable.
Small modification where VOP_PATHCONF was being called directly.
Reviewed by: rmacklem Approved by: zml (mentor) MFC after: 2 weeks
|
#
224077 |
|
16-Jul-2011 |
zack |
Small acl patch to return the aclerror that comes back from nfsrv_dissectacl(). This fixes a problem where ATTRNOTSUPP was being returned instead of BADOWNER.
Reviewed by: rmacklem Approved by: zml (mentor) MFC after: 2 weeks
|
#
222389 |
|
27-May-2011 |
rmacklem |
Fix the new NFS client so that it handles NFSv4 state correctly during a forced dismount. This required that the exclusive and shared (refcnt) sleep lock functions check for MNTK_UMOUNTF before sleeping, so that they won't block while nfscl_umount() is getting rid of the state. As such, a "struct mount *" argument was added to the locking functions. I believe the only remaining case where a forced dismount can get hung in the kernel is when a thread is already attempting to do a TCP connect to a dead server when the krpc client structure called nr_client is NULL. This will only happen just after a "mount -u" with options that force a new TCP connection is done, so it shouldn't be a problem in practice.
MFC after: 2 weeks
|
#
220648 |
|
14-Apr-2011 |
rmacklem |
Fix the experimental NFSv4 server so that it uses VOP_PATHCONF() to determine if a file system supports NFSv4 ACLs. Since VOP_PATHCONF() must be called with a locked vnode, the function is called before nfsvno_fillattr() and the result is passed in as an extra argument.
MFC after: 2 weeks
|
#
220645 |
|
14-Apr-2011 |
rmacklem |
Modify the experimental NFSv4 server so that it handles crossing of server mount points properly. The functions nfsvno_fillattr() and nfsv4_fillattr() were modified to take the extra arguments that are the mount point, a flag to indicate that it is a file system root and the mounted on fileno. The mount point argument needs to be busy when nfsvno_fillattr() is called, since the vp argument is not locked.
Reviewed by: kib MFC after: 2 weeks
|
#
217535 |
|
18-Jan-2011 |
rmacklem |
Fix the experimental NFSv4 server so that it uses VOP_ACCESSX() to check for VREAD_ACL instead of VOP_ACCESS().
MFC after: 3 days
|
#
216875 |
|
01-Jan-2011 |
rmacklem |
Add support for shared vnode locks for the Read operation in the experimental NFSv4 server.
Reviewed by: kib MFC after: 2 weeks
|
#
216700 |
|
25-Dec-2010 |
rmacklem |
Modify the experimental NFS server so that it uses LK_SHARED for RPC operations when it can. Since VFS_FHTOVP() currently always gets an exclusively locked vnode and is usually called at the beginning of each RPC, the RPCs for a given vnode will still be serialized. As such, passing a lock type argument to VFS_FHTOVP() would be preferable to doing the vn_lock() with LK_DOWNGRADE after the VFS_FHTOVP() call.
Reviewed by: kib MFC after: 2 weeks
|
#
211951 |
|
28-Aug-2010 |
rmacklem |
The timer routine in the experimental NFS server did not acquire the correct mutex when checking nfsv4root_lock. Although this could be fixed by adding mutex lock/unlock calls, zack.kirsch at isilon.com suggested a better fix that uses a non-blocking acquisition of a reference count on nfsv4root_lock. This fix allows the weird NFSLOCKSTATE(); NFSUNLOCKSTATE(); synchronization to be deleted. This patch applies this fix.
Tested by: zack.kirsch at isilon.com MFC after: 2 weeks
|
#
205941 |
|
30-Mar-2010 |
rmacklem |
This patch should fix handling of byte range locks locally on the server for the experimental nfs server. When enabled by setting vfs.newnfs.locallocks_enable to non-zero, the experimental nfs server will now acquire byte range locks on the file on behalf of NFSv4 clients, such that lock conflicts between the NFSv4 clients and processes running locally on the server, will be recognized and handled correctly.
MFC after: 2 weeks
|
#
200069 |
|
03-Dec-2009 |
trasz |
Remove unneeded ifdefs.
Reviewed by: rmacklem
|
#
192861 |
|
26-May-2009 |
rmacklem |
Fix the experimental nfs subsystem so that it builds with the current NFSv4 ACLs, as defined in sys/acl.h. It still needs a way to test a mount point for NFSv4 ACL support before it will work. Until then, the NFSHASNFS4ACL() macro just always returns 0.
Approved by: kib (mentor)
|
#
191990 |
|
11-May-2009 |
attilio |
Remove the thread argument from the FSD (File-System Dependent) parts of the VFS. Now all the VFS_* functions and relating parts don't want the context as long as it always refers to curthread.
In some points, in particular when dealing with VOPs and functions living in the same namespace (eg. vflush) which still need to be converted, pass curthread explicitly in order to retain the old behaviour. Such loose ends will be fixed ASAP.
While here fix a bug: now, UFS_EXTATTR can be compiled alone without the UFS_EXTATTR_AUTOSTART option.
VFS KPI is heavilly changed by this commit so thirdy parts modules needs to be recompiled. Bump __FreeBSD_version in order to signal such situation.
|
#
191783 |
|
04-May-2009 |
rmacklem |
Add the experimental nfs subtree to the kernel, that includes support for NFSv4 as well as NFSv2 and 3. It lives in 3 subdirs under sys/fs: nfs - functions that are common to the client and server nfsclient - a mutation of sys/nfsclient that call generic functions to do RPCs and handle state. As such, it retains the buffer cache handling characteristics and vnode semantics that are found in sys/nfsclient, for the most part. nfsserver - the server. It includes a DRC designed specifically for NFSv4, that is used instead of the generic DRC in sys/rpc. The build glue will be checked in later, so at this point, it consists of 3 new subdirs that should not affect kernel building.
Approved by: kib (mentor)
|