- Copy stable/10 (r259064) to releng/10.0 as part of the
10.0-RELEASE cycle.
- Update __FreeBSD_version [1]
- Set branch name to -RC1

[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so
start releng/10.0 at '100' so the branch is started with
a value ending in zero.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Use DEVMETHOD_END macro defined in sys/bus.h instead of {0, 0} sentinel on device_method_t arrays

Reviewed by: cognet
Approved by: cognet

Make uhid attach to devices that look like keyboards
or mice if the quirk which prevents higher level
drivers from attaching is set.

PR: usb/172458
Submitted by: Vitaly Magerya <vmagerya@gmail.com>
Reviewed by: hselasky
Approved by: cperciva
MFC after: 1 week

Fix for the r235558: interrupt output pipe is optional, so fix the driver
attach and operation when it is absent.

Sponsored by: iXsystems, Inc.
MFC after: 1 week

Add support for writing to HID devices through the interrupt output pipe.
Supermicro LCD screen modules seem to not support accessing reports through
the control pipes, but working fine with the interrupt pipes.

Sponsored by: iXsystems, Inc.
MFC after: 1 week

Fix compiler warnings, mostly signed issues,
when USB modules are compiled with WARNS=9.

MFC after: 1 weeks

Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.

The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.

MFprojects/hid:
Import the rest of HID improvements from the branch:
- improve report descriptor parser in libusbhid to handle several kinds of
reports same time;
- add to the libusbhid API two functions wrapping respective kernel IOCTLs
for reading and writing reports;
- tune uhid IOCTL interface to allow reading and writing arbitrary report,
when multiple supported by the device;
- teach usbhidctl to set output and feature reports;
- make usbhidaction support all the same item names as bhidctl.

Sponsored by: iXsystems, inc.

Fix for "nomatch" event for ums and ukbd drivers when uhid is loaded.

MFC after: 3 days

- Move all USB device ID arrays into so-called sections,
sorted according to the mode which they support:
host, device or dual mode
- Add generic tool to extract these data:
tools/bus_autoconf

Discussed with: imp
Suggested by: Robert Millan <rmh@debian.org>
PR: misc/157903
MFC after: 14 days

usb: change to one-pass probing of device drivers

This brings USB bus more in line with how newbus is supposed to be used.
Also, because of the two-pass probing the following message was produced
by devd in default configuration when almost any USB device was
connected:
Unknown USB device: vendor <> product <> bus <>
This should be fixed now.

Note that many USB device drivers pass some information from probe
method to attach method via ivars. For this to continue working we rely
on the fact that the subr_bus code calls probe method of a winning driver
again before calling its attach method in the case where multiple
drivers claim to support a device. This is done because device
description is set in successful probe methods and we want to get a correct
device description from a winning driver. So now this logic is re-used
for setting ivars too.

Reviewed by: hselasky
MFC after: 1 month

Remove unneeded includes of <sys/linker_set.h>. Other headers that use
it internally contain nested includes.

Reviewed by: bde

Fix compiler warnings.

Submitted by: Alexander Best (arundel)
Approved by: thompsa (mentor)

Add missing MODULE_VERSION() definitions, this resolves problems around
duplicate module loads.

PR: usb/125736
Submitted by: danger, mm
Reviewed by: hselasky

Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had
the illusion of a tunable setting but was always turned on regardless.

MFC after: 1 week

The NetBSD Foundation has granted permission to remove clause 3 and 4 from
their software.

Obtained from: NetBSD

If the ID byte is non zero then we allow descriptors having multiple sizes.

Submitted by: HPS
Reported by: daichi

Reduce probe priority of USB input devices to BUS_PROBE_GENERIC from
BUS_PROBE_SPECIFIC. This allows device-specific drivers like atp to
attach reliably.

Reviewed by: hps

Purge mergeinfo from files that were temporarily renamed while USB2 was
imported into the tree alongside USB.

Approved by: re (mergeinfo blanket)

- Make struct usb_xfer opaque so that drivers can not access the internals
- Reduce the number of headers needed for a usb driver, the common case is just usb.h and usbdi.h

s/usb2_/usb_|usbd_/ on all function names for the USB stack.

s/usb2_/usb_/ on all typedefs for the USB stack.

s/usb2_/usb_/ on all C structs for the USB stack.

Rename the usb sysctl tree from hw.usb2.* back to hw.usb.*.

Submitted by: Hans Petter Selasky

- rename usb2_mode to usb_mode [1]
- change variable types to use the enum

Submitted by: Hans Petter Selasky [1]

Remove pointeless mergeinfo that crept in from r190633.

MFp4 //depot/projects/usb@159909

- make usb2_power_mask_t 16-bit
- remove "usb2_config_sub" structure from "usb2_config". To compensate for this
"usb2_config" has a new field called "usb_mode" which select for which mode
the current xfer entry is active. Options are: a) Device mode only b) Host
mode only (default-by-zero) c) Both modes. This change was scripted using
the following sed script: "s/\.mh\././g".
- the standard packet size table in "usb_transfer.c" is now a function, hence
the code for the function uses less memory than the table itself.

Submitted by: Hans Petter Selasky

Implement an ipfw action to reassemble ip packets: reass.

Integrate user/mav/ata branch:

Add ch_suspend/ch_resume methods for PCI controllers and implement them
for AHCI. Refactor AHCI channel initialization according to it.

Fix Port Multipliers operation. It is far from perfect yet, but works now.
Tested with JMicron JMB363 AHCI + SiI 3726 PMP pair.
Previous version was also tested with SiI 4726 PMP.

Hardware sponsored by: Vitsch Electronics / VEHosting.nl

MFp4 //depot/projects/usb @159375,159376,159377

Further remove dependancy towards Giant.

Submitted by: Hans Petter Selasky

Rename the ushub device class back to uhub as it was in the old usb stack,
moused(8) looks for "uhub/ums" to decide if needs to load the module.

Reported by: Garrett Cooper

Change USB over to make_dev() for all device nodes, previously it hooked into
the devfs clone handler to open the (invisible) devices on the fly.

The /dev entries are layed out as follows,

/dev/usbctl = master device
/dev/usb/0.1.0.5 = usb device, (<bus>.<dev>.<iface>.<endpoint>)
/dev/ugen0.1 -> usb/0.1.0.0 = ugen link to ctrl endpoint

This also removes the custom permissions model from USB. Bump
__FreeBSD_version to 800066.

Submitted by: rink (earlier version)

Move the new USB stack into its new home.

Switch over to usbdevs.h generated at compile time.

src/usr.bin/usbhidaction/usbhidaction.c
src/usr.bin/usbhidctl/usbhid.c
src/sys/dev/usb2/include/usb2_hid.h
src/sys/dev/usb2/input/uhid2.c
src/lib/libusbhid/Makefile
src/lib/libusbhid/descr.c
src/lib/libusbhid/descr_compat.c
src/lib/libusbhid/usbhid.3
src/lib/libusbhid/usbhid.h
src/lib/libusbhid/usbvar.h

Patches to make libusbhid and HID userland utilities compatible with
the new USB stack. All HID ioctls should go through the libusbhid
library to ensure compatibility. I have found at least one piece of
software in /usr/ports which needs to get updated before USB HID
devices will work. This is the X joystick input driver.

Reported and tested by:

Daichi GOTO and Masanori OZAWA.

src/sys/dev/usb2/core/usb2_process.c

Correct USB process names.

Reported by:

Andre Guibert de Bruet

src/sys/dev/usb2/serial/uftdi2.c

Integrate changes from old USB stack.

Submitted by: hps

Remove check for null softc in attach, it can never happen.

Name the items in the xfer arrays so they can be identified throughout the
code.

Remove superfluous return statements from the end of void functions.

Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.

This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:

1) A brief feature list:

- A new and mutex enabled USB API.

- Many USB drivers are now running Giant free.

- Linux USB kernel compatibility layer.

- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.

- New "usbconfig" utility, for easy configuration of USB.

- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.

- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.

- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.

- Safer parsing of USB descriptors.

- Autodetect of annoying USB install disks.

- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.

- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.

- ... see the FreeBSD quarterly status reports under "USB project"

2) To enable the driver in the default kernel build:

2.a) Remove all existing USB device options from your kernel config
file.

2.b) Add the following USB device options to your kernel configuration
file:

# USB core support
device usb2_core

# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci

# USB mass storage support
device usb2_storage
device usb2_storage_mass

# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav

# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd

# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom

# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng

# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms

# USB sound and MIDI device support
device usb2_sound

2) To enable the driver at runtime:

2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.

2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.

Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred