- Copy stable/10 (r259064) to releng/10.0 as part of the
10.0-RELEASE cycle.
- Update __FreeBSD_version [1]
- Set branch name to -RC1

[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so
start releng/10.0 at '100' so the branch is started with
a value ending in zero.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Use string literals in string descriptors for marginally
better readability.

Submitted by: Christoph Mallon

Provide one global language string descriptor for
american english instead of giving each module its
own.

Submitted by: Christoph Mallon

Modify the FreeBSD USB kernel code so that it can be compiled directly
into the FreeBSD boot loader, typically for non-USB aware BIOSes, EFI systems
or embedded platforms. This is also useful for out of the system compilation
of the FreeBSD USB stack for various purposes. The USB kernel files can
now optionally include a global header file which should include all needed
definitions required to compile the FreeBSD USB stack. When the global USB
header file is included, no other USB header files will be included by
default.

Add new file containing the USB stack configuration for the
FreeBSD loader build.

Replace some __FBSDID()'s by /* $FreeBSD$ */ comments. Now all
USB files follow the same style.

Use cases:
- console in loader via USB
- loading kernel via USB

Discussed with: Hiroki Sato, hrs @ EuroBSDCon

Inherit USB mode from RootHUB port where the USB device is connected.
Only RootHUB ports can be dual mode. Disallow OTG ports on external HUBs.
This simplifies some checks in the USB controller drivers.

MFC after: 1 week

Add support for the so-called streams feature of BULK endpoints
in SUPER-speed mode, USB 3.0.

This feature has not been tested yet, due to lack of hardware.

This feature is useful when implementing protocols like UASP,
USB attached SCSI which promises higher USB mass storage throughput.

This patch also implements support for hardware processing of endpoints
for increased performance. The switching to hardware processing
of an endpoint is done via a callback to the USB controller driver. The
stream feature is implemented like a variant of a hardware USB protocol.

USB controller drivers implementing device mode needs to be updated to
implement the new "xfer_stall" USB controller method and remove the
"xfer" argument from the "set_stall" method.

The API's toward existing USB drivers are preserved. To setup a USB transfer
in stream mode, set the "stream_id" field of the USB config structure to
the desired value.

The maximum number of BULK streams is currently hardcoded and limited to 8
via a define in usb_freebsd.h.

All USB drivers should be re-compiled after this change.

LibUSB will be updated next week to support streams mode. A new IOCTL to
setup BULK streams as already been implemented. The ugen device nodes
currently only supports stream ID zero.

The FreeBSD version has been bumped.

MFC after: 2 weeks

Fix compiler warnings, mostly signed issues,
when USB modules are compiled with WARNS=9.

MFC after: 1 weeks

Implement better support for USB controller suspend and resume.

This patch should remove the need for kldunload of USB
controller drivers at suspend and kldload of USB controller
drivers at resume.

This patch also fixes some build issues in avr32dci.c

MFC after: 2 weeks

Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.

The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.

Remove unneeded includes of <sys/linker_set.h>. Other headers that use
it internally contain nested includes.

Reviewed by: bde

Correct some root HUB descriptor fields in multiple controller drivers.
Remove an unused structure.

Approved by: thompsa (mentor)

Remove overuse of exclamation marks in kernel printfs, there mere fact a
message has been printed is enough to get someones attention. Also remove the
line number for DPRINTF/DPRINTFN, it already prints the funtion name and a
unique message.

Initialise variable before use.

Submitted by: Hans Petter Selasky

Clear all interrupts rather than just SETUP packet.

Submitted by: Hans Petter Selasky

Purge mergeinfo from files that were temporarily renamed while USB2 was
imported into the tree alongside USB.

Approved by: re (mergeinfo blanket)

USB CORE:
- Add minimum polling support to drive UMASS
and UKBD in case of panic.
- Add extra check to ukbd probe to fix problem about
mouse devices attaching like keyboards.
- P4 ID: 166148

Submitted by: hps
Approved by: re

Sync to p4

- Add support for devices that handle set and clear stall in hardware.
- Add missing get timestamp function
- Add more xfer flags

Submitted by: Hans Petter Selasky
Approved by: re (kib)

- Make struct usb_xfer opaque so that drivers can not access the internals
- Reduce the number of headers needed for a usb driver, the common case is just usb.h and usbdi.h

s/usb2_/usb_|usbd_/ on all function names for the USB stack.

Rename usb pipes to endpoints as it better represents what they are, and struct
usb_pipe may be used for a different purpose later on.

s/usb2_/usb_/ on all typedefs for the USB stack.

s/usb2_/usb_/ on all C structs for the USB stack.

Improve device mode (gadget) stall handling.

Some hardware easily comes out of sync with regard to whether the current or
the next control transfer should be stalled, if a stall command is always
issued before receiving the SETUP packet. After this patch the stall command
will only be issued when a transfer should actually be stalled.

Submitted by: Hans Petter Selasky

Rename the usb sysctl tree from hw.usb2.* back to hw.usb.*.

Submitted by: Hans Petter Selasky

- rename usb2_mode to usb_mode [1]
- change variable types to use the enum

Submitted by: Hans Petter Selasky [1]

- Add new register definitions
- Enable the controller and wait for the PLL to start

Submitted by: Hans Petter Selasky

MFp4 //depot/projects/usb@160930

Change the roothub exec functions to take the usb request and data pointers
directly rather than placing them on the parent bus struct.

Submitted by: Hans Petter Selasky

MFp4 //depot/projects/usb@160708

Need to check Read/Write allowed before writing any data for non-control
transfers.

Submitted by: Hans Petter Selasky

Remove usb_sw_transfer.[ch] which are now empty after r190735.

Provide a better commit log for r190735, forced by making a whitespace change.

Refactor how we interface with the root HUB. This is achieved by making a
direct call from usb2_do_request to the host controller for root hub requests,
this call will perform the controller specific register read/writes and return
the error code.

This cuts out a lot of code in the host controller files and saves one thread
per USB bus.

Submitted by: Hans Petter Selasky

Remove pointeless mergeinfo that crept in from r190633.

MFp4 //depot/projects/usb@159946

Some cancelable flags are always true. Substitute these away. These cancelable
flags were mostly useful with the root HUB which is now handled differently.

Submitted by: Hans Petter Selasky

MFp4 //depot/projects/usb@159926

Minor code factorisation in atmegadci.c

Submitted by: Hans Petter Selasky

MFp4 //depot/projects/usb@159922

Refactor how we interface with the root HUB. This cuts around 1200 lines of
code totally and saves one thread per USB bus.

Submitted by: Hans Petter Selasky

MFp4 //depot/projects/usb@159674

Fix more corner cases around reception of SETUP packets.

Submitted by: Hans Petter Selasky

MFp4 //depot/projects/usb@159673

Fix a corner case around stalling SETUP packets in device side mode.

Submitted by: Hans Petter Selasky

MFp4 //depot/projects/usb@159671

Fix interrupt register setting on the atmegadci controller.

Submitted by: Hans Petter Selasky

Implement an ipfw action to reassemble ip packets: reass.

Integrate user/mav/ata branch:

Add ch_suspend/ch_resume methods for PCI controllers and implement them
for AHCI. Refactor AHCI channel initialization according to it.

Fix Port Multipliers operation. It is far from perfect yet, but works now.
Tested with JMicron JMB363 AHCI + SiI 3726 PMP pair.
Previous version was also tested with SiI 4726 PMP.

Hardware sponsored by: Vitsch Electronics / VEHosting.nl

MFp4 //depot/projects/usb @159479,159502,159516,159522,159529

Workaround for buggy USB hardware not handling new SETUP packet before STATUS
stage is complete, this allows xfers to endpoint0 to return a short frame.

Submitted by: Hans Petter Selasky
Reported by: me

MFp4 //depot/projects/usb @159431,159437,159438

- start using the new USB typedefs in the USB core
- Remove usage of USB_ADD_BYTES()

Submitted by: Hans Petter Selasky

MFp4 //depot/projects/usb@159392

Add ifdefs for making parts of usb conditional.

Submitted by: Hans Petter Selasky

MFp4 //depot/projects/usb @159430

- Move tunable defines into usb_core.h and dependancy towards usb_defs.h
- Leave hardcoded defines in "usb_defs.h".
- Allow overriding all tunable defines.
- Add more customisable typedefs.
- Correct maximum device number.

Submitted by: Hans Petter Selasky

MFp4 //depot/projects/usb 158981,159016,159024

Sync support for ATMEGA DCI parts.

Submitted by: Hans Petter Selasky

MFp4 //depot/projects/usb@157853

Clean up old way of polling the USB hardware. The existing polling support was
a bit hackish.

Submitted by: Hans Petter Selasky

Move the new USB stack into its new home.

MFp4 //depot/projects/usb; 157069,157296,157375,157384,157430

- Change "usb2_pause_mtx" so that it takes the timeout value in ticks
- USB controller: EHCI High Speed Interrupt endpoint fix.
- Fix OHCI and EHCI counting bug when multiple TD's are involved in
a short USB transfer and a short packet happens on the non-last TD in the
USB transfer frame.
- USB process naming cleanup.

Submitted by: Hans Petter Selasky

MFp4: //depot/projects/usb@155869

Initial version of ATMEGA USB device controller
driver. Has not been tested on real hardware yet.
The driver is based upon the AT91DCI driver.

Submitted by: Hans Petter Selasky