- Copy stable/10 (r259064) to releng/10.0 as part of the
10.0-RELEASE cycle.
- Update __FreeBSD_version [1]
- Set branch name to -RC1

[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so
start releng/10.0 at '100' so the branch is started with
a value ending in zero.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC r256459.

cxgbe(4): Update T4 and T5 firmwares to 1.9.12.0

Approved by: re (glebius)

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

- Read all TP parameters in one place.
- Read the filter mode, calculate various shifts, and use them
properly during active open (in select_ntuple).

MFC after: 1 day

- Include the T5 firmware with the driver.
- Update the T4 firmware to the latest.
- Minor reorganization and updates to the version macros, etc.

Obtained from: Chelsio
MFC after: 1 day

cxgbe(4): Some updates to shared code.

Obtained from: Chelsio
MFC after: 1 week

cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This
includes support for the NIC and TOE features of the 40G, 10G, and
1G/100M cards based on the T5.

The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4)
has been updated instead of writing a brand new driver. T5 cards will
show up as cxl (short for cxlgb) ports attached to the t5nex bus driver.

Sponsored by: Chelsio

cxgbe(4): Consider all the API versions of the interfaces exported by
the firmware (instead of just the main firmware version) when evaluating
firmware compatibility. Document the new "hw.cxgbe.fw_install" knob
being introduced here.

This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will
mostly do what was requested in the PR but it's a bit more intelligent
in that it won't reinstall the same firmware repeatedly if the knob is
left set.

PR: kern/173584
MFC after: 5 days

cxgbe(4): Update firmware to 1.8.4.0.

MFC after: 5 days

Add a driver ioctl to read a byte from any device on a port's i2c bus.
This lets userspace read arbitrary information from the SFP+ modules
etc. on this bus.

Reading multiple bytes in the same transaction isn't possible right now.
I'll update the driver once the chip's firmware supports this.

MFC after: 3 days

Update interface to firmware 1.6.2 and include the firmware in the driver.

Obtained from: Chelsio
MFC after: 1 week

cxgbe(4): update to firmware interface 1.5.2.0; updates to shared code.

Many updates to cxgbe(4)

- Device configuration via plain text config file. Also able to operate
when not attached to the chip as the master driver.

- Generic "work request" queue that serves as the base for both ctrl and
ofld tx queues.

- Generic interrupt handler routine that can process any event on any
kind of ingress queue (via a dispatch table).

- A couple of new driver ioctls. cxgbetool can now install a firmware
to the card ("loadfw" command) and can read the card's memory
("memdump" and "tcb" commands).

- Lots of assorted information within dev.t4nex.X.misc.* This is
primarily for debugging and won't show up in sysctl -a.

- Code to manage the L2 tables on the chip.

- Updates to cxgbe(4) man page to go with the tunables that have changed.

- Updates to the shared code in common/

- Updates to the driver-firmware interface (now at fw 1.4.16.0)

MFC after: 1 month

Update to firmware interface 1.3.10

MFC after: 1 week

Update header and related code for firmware 1.3.8

MFC after: 3 days

Upgrade the firmware on the card automatically if a better version is
available. Downgrade only for a major version mismatch.

MFC after: 1 week

cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters.

MFC after: 3 weeks