- Copy stable/10 (r259064) to releng/10.0 as part of the
10.0-RELEASE cycle.
- Update __FreeBSD_version [1]
- Set branch name to -RC1

[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so
start releng/10.0 at '100' so the branch is started with
a value ending in zero.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Don't call destroy_dev on the alias. This fixes half a dozen PRs I think.

Create a /dev/cardbus%d.cis, to be compatible with older versions of
the software. This is a trivial amount of code to keep wireless
monitoring software working... I plan on removing it in 9.0.

Overhaul of CIS parsing, next step: keep a cached copy of the CIS,
read before we configure the card, so we can implement
/dev/cardbus*.cis. Also, do this on a per-child basis, so we now have
a different name than before. I think i'll have to fix that for some
legacy tools to keep working.

I can now do a dumpcis on my running atheros card and have it still work!

First step in cleaning up CIS parsing and /dev/cardbus*.cis: remove
redundant malloc/free. Add comments about how this should really be
done. Fix an overly verbose comment about under 1MB mapping: go ahead
and set the bits, but we ignore them.

Retire BARBIT in favor of new PCI_RID2BAR.

Implement /dev/cardbus%d.cis, same thing as /dev/pccard%d.cis. There
are some rough edges with this still, but it seems to work well enough
to commit.

Use PCIR_BARS rather than CARDBUS_BASE0_REG
Style nit.

Move resource allocation routines from cardbus_cis.c to cardbus.c.
They have nothing at all to do with CIS parsing.

Remove some unused funce parsing: nothing used the results.

Use more of pccard_cis.h's deifnitions for the cardbus specific cis
parsing we do. More work is needed in this area.

This reduces the size of the cardbus module by 380 bytes or so...

Use the standard FreeBSD license

Approved by: imp, jon

Start each of the license/copyright comments with /*-, minor shuffle of lines

MFp4:
u_int*_t -> uint*_t to conform more closely with C99.

Implement PCI_IVAR_ETHADDR. Cardbus has the MAC addr in the CIS,
sometimes, so return it when requested and it does. Also a little
more infrastructure for a few other things.

Submitted by: sam
Approved by: re (blanket for NEWCARD)

Add extra set of parens around the barbit macro to make it clear what
we're intending to shift.

Spotted by: flexlint by way of phk (should fix about 40 messages)

Use the pci.c code wherever possible, rather than copying all the pci
code into cardbus and s/pci/cardbus. This exposes a few pci_*
functions that are now static.

This work is similar to work Justin posted to the mobile list about a
year or two ago, which I have neglected since then.

This is a subset of his current work with the multiple inheritance
newbus architecutre. When completed, that will eliminate the need for
pci/pci_private.h.

Similar work is needed for the cardbus_cis and pccard_cis code as well.

Part two of this NEWCARD update:

Briefly, the significant changes include:
* Way better resource management in pccbb, pccard and cardbus.
* pccard hot-removal now appears to work.
* support pre-fetchable memory in cardbus.
* update cardbus to support new pci bus interface functions.
* Fix CIS reading to no longer use rman_get_virtual().

What's not there, but in the works:
* pccard needs to do interrupt properly and not read the ISR on single
function cards.
* real resource management for pccard
* a complete implementation of CIS parsing
* need to look into how to correctly use mutex in pccbb

Non-functional changes to NEWCARD stuff.
This is the first part of a two-part update to NEWCARD. Changes in this
commit are non-functional, and includes the following:
* indentation and other changes to meet style(9).
* other minor style consistancy changes
* addition of comments
* renaming of device_t variables to be consistant across all of NEWCARD.

(note that not all style violations are fixed in this commit -- those that
aren't will be clobbered by the next commit.)

Initial commit of NEWCARD cardbus side (that actually compiles and works)

Files:
dev/cardbus/cardbus.c
dev/cardbus/cardbusreg.h
dev/cardbus/cardbusvar.h
dev/cardbus/cardbus_cis.c
dev/cardbus/cardbus_cis.h
dev/pccbb/pccbb.c
dev/pccbb/pccbbreg.h
dev/pccbb/pccbbvar.h
dev/pccbb/pccbb_if.m

This should support:
- cardbus controllers:
* TI 113X
* TI 12XX
* TI 14XX
* Ricoh 47X
* Ricoh 46X
* ToPIC 95
* ToPIC 97
* ToPIC 100
* Cirrus Logic CLPD683x
- cardbus cards
* 3c575BT
* 3c575CT
* Xircom X3201 (includes IBM, Xircom and, Intel cards)
[ 3com support already in kernel, Xircom will be committed real soon now]

This doesn't work with 16bit pccards under NEWCARD.

Enable in your config by having "device pccbb" and "device cardbus".
(A "device pccard" will attach a pccard bus, but it means you system have
a high chance of panicing when a 16bit card is inserted)

It should be fairly simple to make a driver attach to cardbus under
NEWCARD -- simply add an entry for attaching to cardbus on a new
DRIVER_MODULE and add new device IDs as necessary. You should also make
sure the card can be detached nicely without the interrupt routine doing
something weird, like going into an infinite loop. Usually that should
entail adding an additional check when a pci register or the bus space is
read to check if it equals 0xffffffff.

Any problems, please let me know.

Reviewed by: imp

Raw import of newconfig cardbus code. This is effectively an import,
so the code doesn't compile. I added $FreeBSD$ headers.