- Copy stable/10 (r259064) to releng/10.0 as part of the
10.0-RELEASE cycle.
- Update __FreeBSD_version [1]
- Set branch name to -RC1

[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so
start releng/10.0 at '100' so the branch is started with
a value ending in zero.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Add a new gptboot(8) man page. Factor out the redundant information
in gpart(8) and boot(8), adding references to gptboot(8) in both.

Reviewed by: jhb, ae, pjd, Paul Schenkeveld <bsdcan@psconsult.nl>, david_a_bright@dell.com (portions), gjb
MFC after: 1 week

Clarify that overriding the -h/-D flags through flags in device.hints
only works for sio(4) but not for uart(4) which no longer has this flag.

Remove vestiges of disklabel(5).

Reviewed by: uqs
MFC after: 5 days

Let boot(8) refer to the uart(4) serial driver, which is the replacement
for the obsolete sio(4) driver.

PR: docs/144498
Submitted by: Bruce Cran (bruce at cran dot org dot uk)
Approved by: marcel
MFC after: 2 weeks

- Sweep the boot(8) man page after addition of boot.config(5).

Reviewed by: keramida
Approved by: re (kensmith)

Cross-reference nextboot(8).

MFC after: 3 days

o Describe what actually boot(8) -m mutes.

PR: docs/67893
Submitted by: Chris Pepper, Daniel Gerzo
MFC after: 2 weeks

-mdoc sweep.

Add new option `q', which makes second stage loader quiet unless autoboot
is disabled or fails.

MFC after: 1 week

Replace "/etc/make.conf" with references to make.conf(5)
where applicable. The main reason for this change is that
the location of make.conf is not constant and can be
modified via __MAKE_CONF. This change also improves
hyper-text linkage in our manpages.

MFC after: 2 weeks

Simplified markup.

Add the ability to specify the boot2 serial console speed in
/boot.config or on the "boot:" prompt line via a "-S<speed>" flag,
e.g. "-h -S19200". This adds about 50 bytes to the size of boot2
and required a few other small changes to limit the size impact.
This changes only affects boot2; there are further loader changes
to follow.

Spell "partition" correctly.

PR: docs/84198
Submitted by: Gary W. Swearingen
MFC after: 3 days

Sort sections.

Scheduled mdoc(7) sweep.

Fixed desctiptions of some options:

- Document better what the -C option means.
- The -c option is currently a no-op.
- The -D and -h options do not allow switching between
single/dual console modes and internal/video consoles.
(This used to be true for the old biosdisk boot code,
but now they just force the multiple consoles mode and
serial console, respectively.)

FreeBSD has full support for multiple consoles since 2001.

Sort the SEE ALSO list correctly. Update the document date.

Reported by: ru

Refrence bsdlabel.8 and bsdlabel.5 rather then the obsolete disklabel.8
and disklabel.5. Refrencing bsdlabel.5 is somewhat bogus as it is not
connected to the build and is mostly unwritten at this point.

Reported by: Matthias Andree <matthias.andree at web.de>
PR: docs/72020

Clarify boot.8 (i386 version) a bit, so that people know
where boot.config needs to reside. Also change /kernel
to /boot/loader, as that is the apparent default now. This
man page probably requires more updates.

Mechanically kill hard sentence breaks.

Remove advertising clause from University of California Regent's license,
per letter dated July 22, 1999.

Approved by: core, imp

Add the /boot prefix. I forgot this when updating the location.

Neglected by: trhodes

Update the kernel location in FILES.

PR: 47015

s/filesystem/file system/g as discussed on -developers

mdoc(7) police: nits.

more file system > filesystem

Add forgotten flag in flag lists.

PR: docs/36267 (partial)
Submitted by: Thomas Quinot <thomas.cuivre.fr.eu.org>

Add option -n to i386 boot2 to disallow boot interruption by keypress.

PR: i386/36016
Submitted by: Thomas Quinot <thomas@cuivre.fr.eu.org>
Reviewed by: rnordier
MFC after: 1 week

Clarify the cylinder > 1023 issue, now that EDD support is automatic.
Also drop a note about undocumented features that was intended to
cover the since-documented slice-selection syntax.

Document the "slice" syntax.

Prodded by: ambrisko

Implement -m and -p loader(8) "boot" command options in boot2.
(This is more useful for 4.x where boot blocks can still load
kernels, modulo the PR kern/17422.)

mdoc(7) police: add -p to the synopsis line as well.

Add new boot flag to i386 boot: -p.
This flag adds a pausing utility. When ran with -p, during the kernel
probing phase, the kernel will pause after each line of output.
This pausing can be ended with the '.' key, and is automatically
suspended when entering ddb.

This flag comes in handy at systems without a serial port that either hang
during booting or reser.
Reviewed by: (partly by jlemon)
MFC after: 1 week

mdoc(7) police: s/BSD/.Bx/ where appropriate.

mdoc(7) police:

Avoid using parenthesis enclosure macros (.Pq and .Po/.Pc) with plain text.
Not only this slows down the mdoc(7) processing significantly, but it also
has an undesired (in this case) effect of disabling hyphenation within the
entire enclosed block.

Remove whitespace at EOL.

Remove duplicate words.

mdoc(7) police: normalize .Nd.

mdoc(7) police: split punctuation characters + misc fixes.

Prepare for mdoc(7)NG.

.Xr boot0cfg 8 ,

PR: misc/18267 (Usov Alexander <[3]usov@ups.kiev.ua>)

The new boot code uses `ad' for ATA disks, not `wd'. Correct the
manual page.

Sync with reallity (USERCONFIG_BOOT option was removed long time ago)
mdoc(7)'fy

$Id$ -> $FreeBSD$

Remove reference to the obsoleted COMCONSOLE option.

Pointed out by: Crist J. Clark <cjc@cc942873-a.ewndsr1.nj.home.com>

Document -P (keyboard probe) assumptions.

Include a table of disk error codes and a note about the cylinder >
1023 issue.

Add cross-reference to loader man page, plus various minor
improvements.

Make some further revisions to the boot documentation.

Make a start on revising the boot documentation.

Remove the reference to the -b option; it's gone.

Correct use of .Nm. Add rcsid. -Wall. Add -p flag in usage string (was missing).

The '-h' option cannot toggle the kernel from a serial console
if the kernel was built with COMCONSOLE

PR: 7202
Reviewed by: phk
Submitted by: Greg A. Woods <woods@zeus.leitch.com>

say a few words about the -b option.

Reviewed by: Bill Trost <trost@cloud.rain.com>

PR: 6104
Submitted by: Anatoly Vorobey <mellon@pobox.com>
Fix typo

Document the enhanced behaviour of the '-c' flag.

Document recent changes (config files and -D...) and not so recent changes
(bios drive number...).

Submitted by: mostly by yokota

Revert $FreeBSD$ to $Id$

Make the long-awaited change from $Id$ to $FreeBSD$

This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.

Sort cross references.

Fix a bunch of spelling errors.

Totally revamp the man page, update to the state of affairs.

Make a link from boot_${ARCH}.8 to boot.8, so people will get what
they expect when asking "man boot".

I think David will lynch me when i'm requesting this to go into 2.1... :-)

Converted 'vmunix' to 'kernel'.

This commit was generated by cvs2svn to compensate for changes in r1558,
which included commits to RCS files with non-trunk default branches.

BSD 4.4 Lite sbin Sources

Note: XNSrouted and routed NOT imported here, they shall be imported with
usr.sbin.