#
284900 |
|
28-Jun-2015 |
neel |
MFC r282209: Emulate the 'bit test' instruction.
MFC r282259: Re-implement RTC current time calculation to eliminate the possibility of losing time.
MFC r282281: Advertise the MTRR feature via CPUID and emulate the minimal set of MTRR MSRs.
MFC r282284: When an instruction cannot be decoded just return to userspace so bhyve(8) can dump the instruction bytes.
MFC r282287: Don't require <sys/cpuset.h> to be always included before <machine/vmm.h>.
MFC r282296: Emulate MSR_SYSCFG which is accessed by Linux on AMD cpus when MTRRs are enabled.
MFC r282301: Relax limits when transitioning a vector from the IRR to the ISR and also when extinguishing it from the ISR in response to an EOI.
MFC r282335: Advertise an additional memory BAR in the "dummy" device emulation.
MFC r282336: Emulate machine check related MSRs to allow guest OSes like Windows to boot.
MFC r282351: Don't advertise the Intel SMX capability to the guest.
MFC r282407: Emulate the 'CMP r/m8, imm8' instruction.
MFC r282519: Add macros for AMD-specific bits in MSR_EFER: LMSLE, FFXSR and TCE.
MFC r282520: Emulate guest writes to EFER_MSR properly.
MFC r282558: Deprecate the 3-way return values from vm_gla2gpa() and vm_copy_setup().
MFC r282571: Check 'td_owepreempt' and yield the vcpu thread if it is set.
MFC r282595: Allow byte reads of AHCI registers.
MFC r282784: Handling indirect descriptors is a capability of the host and not one that needs to be negotiated. Use the host capabilities field and not the negotiated field when verifying that indirect descriptors are supported.
MFC r282788: Allow configuration of the sector size advertised to the guest.
MFC r282865: Set the subvendor field in config space to the vendor ID. This is required by the Windows virtio drivers to correctly match a device.
MFC r282922: Bump the size of the blockif scatter-gather list to 67.
MFC r283075: Fix off-by-one in array index bounds check. bhyveload would allow you to create 33 entries on an array that only has 32 slots
MFC r283168: Temporarily revert r282922 which bumped the max descriptors.
MFC r283255: Emulate the "CMP r/m, reg" instruction (opcode 39H).
MFC r283256: Add an option "--get-vmcs-exit-inst-length" to display the instruction length of the instruction that caused the VM-exit.
MFC r283264: Change the header type of the emulated host-bridge from type 1 to type 0.
MFC r283293: Don't rely on the 'VM-exit instruction length' field in the VMCS to always have an accurate length on an EPT violation.
MFC r283299: Remove bogus verification of instruction length after instruction decode.
MFC r283308: Exceptions don't deliver an error code in real mode.
MFC r283657: Fix non-deterministic delays when accessing a vcpu that was in "running" or "sleeping" state.
MFC r283973: Use tunable 'hw.vmm.svm.features' to disable specific SVM features even though they might be available in hardware. Use tunable 'hw.vmm.svm.num_asids' to limit the number of ASIDs used by the hypervisor.
MFC r284046: Fix regression in 'verify_gla()' with the RIP-relative addressing mode.
MFC r284174: Support guest writes to the TSC by enabling the "use TSC offsetting" execution control.
|
#
282307 |
|
01-May-2015 |
mav |
MFC r281700: Workaround bhyve virtual disks operation on top of GEOM providers.
GEOM does not support scatter/gather lists in its I/Os. Such requests are cut in pieces by physio(), that may be problematic, if those pieces are not multiple of provider's sector size. If such case is detected, move the data through temporary sequential buffer.
|
#
280748 |
|
27-Mar-2015 |
mav |
MFC r280126: Pre-allocate one extra request per processing thread.
Processing threads call callbacks before freeing requests. As result, new requests may arrive before old ones are freed.
|
#
280746 |
|
27-Mar-2015 |
mav |
MFC r280042: Close potential race on blockif_close().
Reported by: vangyzen
|
#
280744 |
|
27-Mar-2015 |
mav |
MFC r280037: Rewrite virtio block device driver to work asynchronously and use the block I/O interface.
Asynchronous operation, based on r280026 change, allows to not block virtual CPU during I/O processing, that on slow/busy storage can take seconds. Use of recently improved block I/O interface allows to process multiple requests same time, that improves random I/O performance on wide storages.
Benchmarks of virtual disk, backed by ZVOL on RAID10 pool of 4 HDDs, show ~3.5 times random read performance improvements, while no degradation on linear I/O. Guest CPU usage during test dropped from 100% to almost zero.
|
#
280742 |
|
27-Mar-2015 |
mav |
MFC r280004: Give block I/O interface multiple (8) execution threads.
On parallel random I/O this allows better utilize wide storage pools. To not confuse prefetcher on linear I/O, consecutive requests are executed sequentially, following the same logic as was earlier implemented in CTL.
Benchmarks of virtual AHCI disk, backed by ZVOL on RAID10 pool of 4 HDDs, show ~3.5 times random read performance improvements, while no degradation on linear I/O.
|
#
280370 |
|
23-Mar-2015 |
mav |
MFC r279957, r280017: Add DSM TRIM command support for virtual AHCI disks.
It works only for virtual disks backed by ZVOLs and raw devices supporting BIO_DELETE. Virtual disks backed by files won't report this capability.
Relnotes: yes
|
#
280245 |
|
19-Mar-2015 |
mav |
MFC r279658, r279673, r279675: Implement cache flush for ahci-hd and for virtio-blk over device.
|
#
280244 |
|
19-Mar-2015 |
mav |
MFC r279654: Report logical/physical sector sizes for virtual SATA disk.
|
#
276429 |
|
30-Dec-2014 |
neel |
MFC r273683 Move the ACPI PM timer emulation into vmm.ko.
MFC r273706 Change the type of the first argument to the I/O emulation handlers to 'struct vm *'.
MFC r273710 Add a comment explaining the intent behind the I/O reservation [0x72-0x77].
MFC r273744 Add foo_genassym.c files to DPSRCS so dependencies for them are generated. This ensures these objects are rebuilt to generate an updated header of assembly constants if needed.
MFC r274045 If the start bit, PxCMD.ST, is cleared and nothing is in-flight then PxCI, PxSACT, PxCMD.CCS and PxCMD.CR should be 0.
MFC r274076 Improve the ability to cancel an in-flight request by using an interrupt, via SIGCONT, to force the read or write system call to return prematurely.
MFC r274330 To allow a request to be submitted from within the callback routine of a completing one increase the total by 1 but don't advertise it.
MFC r274931 Change the lower bound for guest vmspace allocation to 0 instead of using the VM_MIN_ADDRESS constant.
MFC r275817 For level triggered interrupts clear the PIC IRR bit when the interrupt pin is deasserted.
MFC r275850 Fix 8259 IRQ priority resolver.
MFC r275952 Various 8259 device model improvements.
MFC r275965 Emulate writes to the IA32_MISC_ENABLE MSR.
|
#
276349 |
|
28-Dec-2014 |
neel |
MFC r270326 Fix a recursive lock acquisition in vi_reset_dev().
MFC r270434 Return the spurious interrupt vector (IRQ7 or IRQ15) if the atpic cannot find any unmasked pin with an interrupt asserted.
MFC r270436 Fix a bug in the emulation of CPUID leaf 0x4.
MFC r270437 Add "hw.vmm.topology.threads_per_core" and "hw.vmm.topology.cores_per_package" tunables to modify the default cpu topology advertised by bhyve.
MFC r270855 Set the 'inst_length' to '0' early on before any error conditions are detected in the emulation of the task switch. If any exceptions are triggered then the guest %rip should point to instruction that caused the task switch as opposed to the one after it.
MFC r270857 The "SUB" instruction used in getcc() actually does 'x -= y' so use the proper constraint for 'x'. The "+r" constraint indicates that 'x' is an input and output register operand.
While here generate code for different variants of getcc() using a macro GETCC(sz) where 'sz' indicates the operand size.
Update the status bits in %rflags when emulating AND and OR opcodes.
MFC r271439 Initialize 'bc_rdonly' to the right value.
MFC r271451 Optimize the common case of injecting an interrupt into a vcpu after a HLT by explicitly moving it out of the interrupt shadow.
MFC r271888 Restructure the MSR handling so it is entirely handled by processor-specific code.
MFC r271890 MSR_KGSBASE is no longer saved and restored from the guest MSR save area. This behavior was changed in r271888 so update the comment block to reflect this.
MFC r271891 Add some more KTR events to help debugging.
MFC r272197 mmap(2) requires either MAP_PRIVATE or MAP_SHARED for non-anonymous mappings.
MFC r272395 Get rid of code that dealt with the hardware not being able to save/restore the PAT MSR on guest exit/entry. This workaround was done for a beta release of VMware Fusion 5 but is no longer needed in later versions.
All Intel CPUs since Nehalem have supported saving and restoring MSR_PAT in the VM exit and entry controls.
MFC r272670 Inject #UD into the guest when it executes either 'MONITOR' or 'MWAIT'.
MFC r272710 Implement the FLUSH operation in the virtio-block emulation.
MFC r272838 iasl(8) expects integer fields in data tables to be specified as hexadecimal values. Therefore the bit width of the "PM Timer Block" was actually being interpreted as 50-bits instead of the expected 32-bit.
This eliminates an error message emitted by a Linux 3.17 guest during boot: "Invalid length for FADT/PmTimerBlock: 50, using default 32"
MFC r272839 Support Intel-specific MSRs that are accessed when booting up a linux in bhyve: - MSR_PLATFORM_INFO - MSR_TURBO_RATIO_LIMITx - MSR_RAPL_POWER_UNIT
MFC r273108 Emulate "POP r/m". This is needed to boot OpenBSD/i386 MP kernel in bhyve.
MFC r273212 Support stopping and restarting the AHCI command list via toggling PxCMD.ST from '1' to '0' and back. This allows the driver a chance to recover if for instance a timeout occurred due to activity on the host.
|
#
270159 |
|
18-Aug-2014 |
grehan |
MFC r267921, r267934, r267949, r267959, r267966, r268202, r268276, r268427, r268428, r268521, r268638, r268639, r268701, r268777, r268889, r268922, r269008, r269042, r269043, r269080, r269094, r269108, r269109, r269281, r269317, r269700, r269896, r269962, r269989.
Catch bhyve up to CURRENT.
Lightly tested with FreeBSD i386/amd64, Linux i386/amd64, and OpenBSD/amd64. Still resolving an issue with OpenBSD/i386.
Many thanks to jhb@ for all the hard work on the prior MFCs !
r267921 - support the "mov r/m8, imm8" instruction r267934 - document options r267949 - set DMI vers/date to fixed values r267959 - doc: sort cmd flags r267966 - EPT misconf post-mortem info r268202 - use correct flag for event index r268276 - 64-bit virtio capability api r268427 - invalidate guest TLB when cr3 is updated, needed for TSS r268428 - identify vcpu's operating mode r268521 - use correct offset in guest logical-to-linear translation r268638 - chs value r268639 - chs fake values r268701 - instr emul operand/address size override prefix support r268777 - emulation for legacy x86 task switching r268889 - nested exception support r268922 - fix INVARIANTS build r269008 - emulate instructions found in the OpenBSD/i386 5.5 kernel r269042 - fix fault injection r269043 - Reduce VMEXIT_RESTARTs in task_switch.c r269080 - fix issues in PUSH emulation r269094 - simplify return values from the inout handlers r269108 - don't return -1 from the push emulation handler r269109 - avoid permanent sleep in vm_handle_hlt() r269281 - list VT-x features in base kernel dmesg r269317 - Mark AHCI fatal errors as not completed r269700 - Support PCI extended config space in bhyve r269896 - Minor cleanup r269962 - use max guest memory when creating IOMMU domain r269989 - fix interrupt mode names
|
#
268953 |
|
21-Jul-2014 |
jhb |
MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked.
|
#
267071 |
|
04-Jun-2014 |
jhb |
MFC 260999: Increase the block-layer backend maximum number of requests to match the AHCI command queue depth.
|
#
259301 |
|
13-Dec-2013 |
grehan |
MFC r256657,r257018,r257347,r257423,r257729,r257767, r257933,r258609,r258614,r258668,r258673,r258855
Pull in some minor bugfixes and functionality enhancements from CURRENT. These are candidates to be moved to 10.0-release.
r258855 mdoc: quote string properly.
r258673 Don't create an initial value for the host filesystem of "/".
r258668 Allow bhyve and bhyveload to attach to tty devices.
r258614 The 22-bit Data Byte Count (DBC) field of a Physical Region Descriptor was being read as a 32-bit quantity by the bhyve AHCI driver.
r258609 Fix discrepancy between the IOAPIC ID advertised by firmware tables and the actual value read by the guest.
r257933 Route the legacy timer interrupt (IRQ0) to pin 2 of the IOAPIC.
r257767 Fix an off-by-one error when iterating over the emulated PCI BARs.
r257729 Add the VM name to the process name with setproctitle().
r257423 Make the virtual ioapic available unconditionally in a bhyve virtual machine.
r257347 Update copyright to include the author of the LPC bridge emulation code.
hand-merge r257018 Tidy usage messages for bhyve and bhyveload.
r256657 Add an option to bhyveload(8) that allows setting a loader environment variable from the command line.
Discussed with: neel
|
#
284900 |
|
28-Jun-2015 |
neel |
MFC r282209: Emulate the 'bit test' instruction.
MFC r282259: Re-implement RTC current time calculation to eliminate the possibility of losing time.
MFC r282281: Advertise the MTRR feature via CPUID and emulate the minimal set of MTRR MSRs.
MFC r282284: When an instruction cannot be decoded just return to userspace so bhyve(8) can dump the instruction bytes.
MFC r282287: Don't require <sys/cpuset.h> to be always included before <machine/vmm.h>.
MFC r282296: Emulate MSR_SYSCFG which is accessed by Linux on AMD cpus when MTRRs are enabled.
MFC r282301: Relax limits when transitioning a vector from the IRR to the ISR and also when extinguishing it from the ISR in response to an EOI.
MFC r282335: Advertise an additional memory BAR in the "dummy" device emulation.
MFC r282336: Emulate machine check related MSRs to allow guest OSes like Windows to boot.
MFC r282351: Don't advertise the Intel SMX capability to the guest.
MFC r282407: Emulate the 'CMP r/m8, imm8' instruction.
MFC r282519: Add macros for AMD-specific bits in MSR_EFER: LMSLE, FFXSR and TCE.
MFC r282520: Emulate guest writes to EFER_MSR properly.
MFC r282558: Deprecate the 3-way return values from vm_gla2gpa() and vm_copy_setup().
MFC r282571: Check 'td_owepreempt' and yield the vcpu thread if it is set.
MFC r282595: Allow byte reads of AHCI registers.
MFC r282784: Handling indirect descriptors is a capability of the host and not one that needs to be negotiated. Use the host capabilities field and not the negotiated field when verifying that indirect descriptors are supported.
MFC r282788: Allow configuration of the sector size advertised to the guest.
MFC r282865: Set the subvendor field in config space to the vendor ID. This is required by the Windows virtio drivers to correctly match a device.
MFC r282922: Bump the size of the blockif scatter-gather list to 67.
MFC r283075: Fix off-by-one in array index bounds check. bhyveload would allow you to create 33 entries on an array that only has 32 slots
MFC r283168: Temporarily revert r282922 which bumped the max descriptors.
MFC r283255: Emulate the "CMP r/m, reg" instruction (opcode 39H).
MFC r283256: Add an option "--get-vmcs-exit-inst-length" to display the instruction length of the instruction that caused the VM-exit.
MFC r283264: Change the header type of the emulated host-bridge from type 1 to type 0.
MFC r283293: Don't rely on the 'VM-exit instruction length' field in the VMCS to always have an accurate length on an EPT violation.
MFC r283299: Remove bogus verification of instruction length after instruction decode.
MFC r283308: Exceptions don't deliver an error code in real mode.
MFC r283657: Fix non-deterministic delays when accessing a vcpu that was in "running" or "sleeping" state.
MFC r283973: Use tunable 'hw.vmm.svm.features' to disable specific SVM features even though they might be available in hardware. Use tunable 'hw.vmm.svm.num_asids' to limit the number of ASIDs used by the hypervisor.
MFC r284046: Fix regression in 'verify_gla()' with the RIP-relative addressing mode.
MFC r284174: Support guest writes to the TSC by enabling the "use TSC offsetting" execution control.
|
#
282307 |
|
01-May-2015 |
mav |
MFC r281700: Workaround bhyve virtual disks operation on top of GEOM providers.
GEOM does not support scatter/gather lists in its I/Os. Such requests are cut in pieces by physio(), that may be problematic, if those pieces are not multiple of provider's sector size. If such case is detected, move the data through temporary sequential buffer.
|
#
280748 |
|
27-Mar-2015 |
mav |
MFC r280126: Pre-allocate one extra request per processing thread.
Processing threads call callbacks before freeing requests. As result, new requests may arrive before old ones are freed.
|
#
280746 |
|
27-Mar-2015 |
mav |
MFC r280042: Close potential race on blockif_close().
Reported by: vangyzen
|
#
280744 |
|
27-Mar-2015 |
mav |
MFC r280037: Rewrite virtio block device driver to work asynchronously and use the block I/O interface.
Asynchronous operation, based on r280026 change, allows to not block virtual CPU during I/O processing, that on slow/busy storage can take seconds. Use of recently improved block I/O interface allows to process multiple requests same time, that improves random I/O performance on wide storages.
Benchmarks of virtual disk, backed by ZVOL on RAID10 pool of 4 HDDs, show ~3.5 times random read performance improvements, while no degradation on linear I/O. Guest CPU usage during test dropped from 100% to almost zero.
|
#
280742 |
|
27-Mar-2015 |
mav |
MFC r280004: Give block I/O interface multiple (8) execution threads.
On parallel random I/O this allows better utilize wide storage pools. To not confuse prefetcher on linear I/O, consecutive requests are executed sequentially, following the same logic as was earlier implemented in CTL.
Benchmarks of virtual AHCI disk, backed by ZVOL on RAID10 pool of 4 HDDs, show ~3.5 times random read performance improvements, while no degradation on linear I/O.
|
#
280370 |
|
23-Mar-2015 |
mav |
MFC r279957, r280017: Add DSM TRIM command support for virtual AHCI disks.
It works only for virtual disks backed by ZVOLs and raw devices supporting BIO_DELETE. Virtual disks backed by files won't report this capability.
Relnotes: yes
|
#
280245 |
|
19-Mar-2015 |
mav |
MFC r279658, r279673, r279675: Implement cache flush for ahci-hd and for virtio-blk over device.
|
#
280244 |
|
19-Mar-2015 |
mav |
MFC r279654: Report logical/physical sector sizes for virtual SATA disk.
|
#
276429 |
|
30-Dec-2014 |
neel |
MFC r273683 Move the ACPI PM timer emulation into vmm.ko.
MFC r273706 Change the type of the first argument to the I/O emulation handlers to 'struct vm *'.
MFC r273710 Add a comment explaining the intent behind the I/O reservation [0x72-0x77].
MFC r273744 Add foo_genassym.c files to DPSRCS so dependencies for them are generated. This ensures these objects are rebuilt to generate an updated header of assembly constants if needed.
MFC r274045 If the start bit, PxCMD.ST, is cleared and nothing is in-flight then PxCI, PxSACT, PxCMD.CCS and PxCMD.CR should be 0.
MFC r274076 Improve the ability to cancel an in-flight request by using an interrupt, via SIGCONT, to force the read or write system call to return prematurely.
MFC r274330 To allow a request to be submitted from within the callback routine of a completing one increase the total by 1 but don't advertise it.
MFC r274931 Change the lower bound for guest vmspace allocation to 0 instead of using the VM_MIN_ADDRESS constant.
MFC r275817 For level triggered interrupts clear the PIC IRR bit when the interrupt pin is deasserted.
MFC r275850 Fix 8259 IRQ priority resolver.
MFC r275952 Various 8259 device model improvements.
MFC r275965 Emulate writes to the IA32_MISC_ENABLE MSR.
|
#
276349 |
|
28-Dec-2014 |
neel |
MFC r270326 Fix a recursive lock acquisition in vi_reset_dev().
MFC r270434 Return the spurious interrupt vector (IRQ7 or IRQ15) if the atpic cannot find any unmasked pin with an interrupt asserted.
MFC r270436 Fix a bug in the emulation of CPUID leaf 0x4.
MFC r270437 Add "hw.vmm.topology.threads_per_core" and "hw.vmm.topology.cores_per_package" tunables to modify the default cpu topology advertised by bhyve.
MFC r270855 Set the 'inst_length' to '0' early on before any error conditions are detected in the emulation of the task switch. If any exceptions are triggered then the guest %rip should point to instruction that caused the task switch as opposed to the one after it.
MFC r270857 The "SUB" instruction used in getcc() actually does 'x -= y' so use the proper constraint for 'x'. The "+r" constraint indicates that 'x' is an input and output register operand.
While here generate code for different variants of getcc() using a macro GETCC(sz) where 'sz' indicates the operand size.
Update the status bits in %rflags when emulating AND and OR opcodes.
MFC r271439 Initialize 'bc_rdonly' to the right value.
MFC r271451 Optimize the common case of injecting an interrupt into a vcpu after a HLT by explicitly moving it out of the interrupt shadow.
MFC r271888 Restructure the MSR handling so it is entirely handled by processor-specific code.
MFC r271890 MSR_KGSBASE is no longer saved and restored from the guest MSR save area. This behavior was changed in r271888 so update the comment block to reflect this.
MFC r271891 Add some more KTR events to help debugging.
MFC r272197 mmap(2) requires either MAP_PRIVATE or MAP_SHARED for non-anonymous mappings.
MFC r272395 Get rid of code that dealt with the hardware not being able to save/restore the PAT MSR on guest exit/entry. This workaround was done for a beta release of VMware Fusion 5 but is no longer needed in later versions.
All Intel CPUs since Nehalem have supported saving and restoring MSR_PAT in the VM exit and entry controls.
MFC r272670 Inject #UD into the guest when it executes either 'MONITOR' or 'MWAIT'.
MFC r272710 Implement the FLUSH operation in the virtio-block emulation.
MFC r272838 iasl(8) expects integer fields in data tables to be specified as hexadecimal values. Therefore the bit width of the "PM Timer Block" was actually being interpreted as 50-bits instead of the expected 32-bit.
This eliminates an error message emitted by a Linux 3.17 guest during boot: "Invalid length for FADT/PmTimerBlock: 50, using default 32"
MFC r272839 Support Intel-specific MSRs that are accessed when booting up a linux in bhyve: - MSR_PLATFORM_INFO - MSR_TURBO_RATIO_LIMITx - MSR_RAPL_POWER_UNIT
MFC r273108 Emulate "POP r/m". This is needed to boot OpenBSD/i386 MP kernel in bhyve.
MFC r273212 Support stopping and restarting the AHCI command list via toggling PxCMD.ST from '1' to '0' and back. This allows the driver a chance to recover if for instance a timeout occurred due to activity on the host.
|
#
270159 |
|
18-Aug-2014 |
grehan |
MFC r267921, r267934, r267949, r267959, r267966, r268202, r268276, r268427, r268428, r268521, r268638, r268639, r268701, r268777, r268889, r268922, r269008, r269042, r269043, r269080, r269094, r269108, r269109, r269281, r269317, r269700, r269896, r269962, r269989.
Catch bhyve up to CURRENT.
Lightly tested with FreeBSD i386/amd64, Linux i386/amd64, and OpenBSD/amd64. Still resolving an issue with OpenBSD/i386.
Many thanks to jhb@ for all the hard work on the prior MFCs !
r267921 - support the "mov r/m8, imm8" instruction r267934 - document options r267949 - set DMI vers/date to fixed values r267959 - doc: sort cmd flags r267966 - EPT misconf post-mortem info r268202 - use correct flag for event index r268276 - 64-bit virtio capability api r268427 - invalidate guest TLB when cr3 is updated, needed for TSS r268428 - identify vcpu's operating mode r268521 - use correct offset in guest logical-to-linear translation r268638 - chs value r268639 - chs fake values r268701 - instr emul operand/address size override prefix support r268777 - emulation for legacy x86 task switching r268889 - nested exception support r268922 - fix INVARIANTS build r269008 - emulate instructions found in the OpenBSD/i386 5.5 kernel r269042 - fix fault injection r269043 - Reduce VMEXIT_RESTARTs in task_switch.c r269080 - fix issues in PUSH emulation r269094 - simplify return values from the inout handlers r269108 - don't return -1 from the push emulation handler r269109 - avoid permanent sleep in vm_handle_hlt() r269281 - list VT-x features in base kernel dmesg r269317 - Mark AHCI fatal errors as not completed r269700 - Support PCI extended config space in bhyve r269896 - Minor cleanup r269962 - use max guest memory when creating IOMMU domain r269989 - fix interrupt mode names
|
#
268953 |
|
21-Jul-2014 |
jhb |
MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365, 265941,265951,266390,266550,266910: Various bhyve fixes: - Don't save host's return address in 'struct vmxctx'. - Permit non-32-bit accesses to local APIC registers. - Factor out common ioport handler code. - Use calloc() in favor of malloc + memset. - Change the vlapic timer frequency to be in the ballpark of contemporary hardware. - Allow the guest to read the TSC via MSR 0x10. - A VMCS is always inactive when it exits the vmx_run() loop. Remove redundant code and the misleading comment that suggest otherwise. - Ignore writes to microcode update MSR. This MSR is accessed by RHEL7 guest. Add KTR tracepoints to annotate wrmsr and rdmsr VM exits. - Provide an alias for the userboot console and name it 'comconsole'. - Use EV_ADD to create an mevent and EV_ENABLE to enable it. - abort(3) the process in response to a VMEXIT_ABORT. - Don't include the guest memory segments in the bhyve(8) process core dump. - Make the vmx asm code dtrace-fbt-friendly. - Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in the VCPU_RUNNING state. - Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR isn't locked.
|
#
267071 |
|
04-Jun-2014 |
jhb |
MFC 260999: Increase the block-layer backend maximum number of requests to match the AHCI command queue depth.
|
#
259301 |
|
13-Dec-2013 |
grehan |
MFC r256657,r257018,r257347,r257423,r257729,r257767, r257933,r258609,r258614,r258668,r258673,r258855
Pull in some minor bugfixes and functionality enhancements from CURRENT. These are candidates to be moved to 10.0-release.
r258855 mdoc: quote string properly.
r258673 Don't create an initial value for the host filesystem of "/".
r258668 Allow bhyve and bhyveload to attach to tty devices.
r258614 The 22-bit Data Byte Count (DBC) field of a Physical Region Descriptor was being read as a 32-bit quantity by the bhyve AHCI driver.
r258609 Fix discrepancy between the IOAPIC ID advertised by firmware tables and the actual value read by the guest.
r257933 Route the legacy timer interrupt (IRQ0) to pin 2 of the IOAPIC.
r257767 Fix an off-by-one error when iterating over the emulated PCI BARs.
r257729 Add the VM name to the process name with setproctitle().
r257423 Make the virtual ioapic available unconditionally in a bhyve virtual machine.
r257347 Update copyright to include the author of the LPC bridge emulation code.
hand-merge r257018 Tidy usage messages for bhyve and bhyveload.
r256657 Add an option to bhyveload(8) that allows setting a loader environment variable from the command line.
Discussed with: neel
|