MFC 323170

if: Add ioctls to get RSS key and hash type/function.

It will be needed by hn(4) to configure its RSS key and hash
type/function in the transparent VF mode in order to match VF's
RSS settings. The description of the transparent VF mode and
the RSS hash value issue are here:
https://svnweb.freebsd.org/base?view=revision&revision=322299
https://svnweb.freebsd.org/base?view=revision&revision=322485

These are generic enough to promise two independent IOCs instead
of abusing SIOCGDRVSPEC.

Setting RSS key and hash type/function is a different story,
which probably requires more discussion.

Comment about UDP_{IPV4,IPV6,IPV6_EX} were only in the patch
in the review request; these hash types are standardized now.

Reviewed by: gallatin
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D12174

MFC r318160, 318176: Persistently store NIC's hardware MAC address, and add
a way to retrive it

NOTE: Due to restructuring, the merges didn't apply cleanly; the resulting
change is almost identical to what went into stable/11, but in some cases in
different locations.

The MAC address reported by `ifconfig ${nic} ether' does not always match
the address in the hardware, as reported by the driver during attach. In
particular, NICs which are components of a lagg(4) interface all report the
same MAC.

When attaching, the NIC driver passes the MAC address it read from the
hardware as an argument to ether_ifattach(). Keep a second copy of it, and
create ioctl(SIOCGHWADDR) to return it. Teach `ifconfig' to report it along
with the active MAC address.

PR: 194386

MFC r298931, r298981, r299375:

Minor spelling fixes in:
sys/dev, sys/sys

Many of these have user-visible strings.

MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014,
r271524,r273541,r282967,r283009,r283364.

Add support for reading i2c SFP/SFP+ data from NIC driver and
presenting most interesting fields via ifconfig -v.
This version supports Intel ixgbe driver only.

Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers

* Add new net/sff8436.h containing constants used to access
QSFP+ data via i2c inteface. These constants has been taken
from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard
rev 4.8.
* Add support for printing QSFP+ information from 40G NICs
such as Chelsio T5.

Example:
cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....>
ether 00:07:43:28:ad:08
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet 40Gbase-LR4 <full-duplex>
status: active
plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic)
vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18
module temperature: 64.06 C voltage: 3.26 Volts
lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm)
lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm)
lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm)
lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm)

Tested on: Chelsio T5
Tested on: Mellanox/Huawei passive/active cables/transceivers.

Sponsored by: Yandex LLC

MFC r282809:
Add new socket ioctls SIOC[SG]TUNFIB to set FIB number of encapsulated
packets on tunnel interfaces. Add support of these ioctls to gre(4),
gif(4) and me(4) interfaces. For incoming packets M_SETFIB() should use
if_fib value from ifnet structure, use proper value in gre(4) and me(4).

Differential Revision: https://reviews.freebsd.org/D2462

MFC r281236 -- extended media types in if_media.h.

Approved by: jfv (mentor)

Merge r263203: garbage collect long time obsoleted (or never used) stuff
from routing API.

MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014,
r271524,r273541,r282967,r283009,r283364.

Add support for reading i2c SFP/SFP+ data from NIC driver and
presenting most interesting fields via ifconfig -v.
This version supports Intel ixgbe driver only.

Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers

* Add new net/sff8436.h containing constants used to access
QSFP+ data via i2c inteface. These constants has been taken
from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard
rev 4.8.
* Add support for printing QSFP+ information from 40G NICs
such as Chelsio T5.

Example:
cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....>
ether 00:07:43:28:ad:08
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet 40Gbase-LR4 <full-duplex>
status: active
plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic)
vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18
module temperature: 64.06 C voltage: 3.26 Volts
lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm)
lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm)
lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm)
lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm)

Tested on: Chelsio T5
Tested on: Mellanox/Huawei passive/active cables/transceivers.

Sponsored by: Yandex LLC

MFC r282809:
Add new socket ioctls SIOC[SG]TUNFIB to set FIB number of encapsulated
packets on tunnel interfaces. Add support of these ioctls to gre(4),
gif(4) and me(4) interfaces. For incoming packets M_SETFIB() should use
if_fib value from ifnet structure, use proper value in gre(4) and me(4).

Differential Revision: https://reviews.freebsd.org/D2462

MFC r281236 -- extended media types in if_media.h.

Approved by: jfv (mentor)

Merge r263203: garbage collect long time obsoleted (or never used) stuff
from routing API.