| #
286810 |
|
15-Aug-2015 |
melifaro |
MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014,
r271524,r273541,r282967,r283009,r283364.
Add support for reading i2c SFP/SFP+ data from NIC driver and
presenting most interesting fields via ifconfig -v.
This version supports Intel ixgbe driver only.
Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers
* Add new net/sff8436.h containing constants used to access
QSFP+ data via i2c inteface. These constants has been taken
from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard
rev 4.8.
* Add support for printing QSFP+ information from 40G NICs
such as Chelsio T5.
Example:
cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....>
ether 00:07:43:28:ad:08
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet 40Gbase-LR4 <full-duplex>
status: active
plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic)
vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18
module temperature: 64.06 C voltage: 3.26 Volts
lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm)
lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm)
lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm)
lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm)
Tested on: Chelsio T5
Tested on: Mellanox/Huawei passive/active cables/transceivers.
Sponsored by: Yandex LLC
|
| #
259206 |
|
10-Dec-2013 |
np |
MFC r258692 (gnn).
Add constants for use in interrogating various fiber and copper connectors
most often used with network interfaces.
The SFF-8472 standard defines the information that can be retrieved
from an optic or a copper cable plugged into a NIC, most often
referred to as SFP+. Examples of values that can be read
include the cable vendor's name, part number, date of manufacture
as well as running data such as temperature, voltage and tx
and rx power.
Copious comments on how to use these values with an I2C interface
are given in the header file itself.
Discussed with: gnn
|
| #
286810 |
|
15-Aug-2015 |
melifaro |
MFC r270064,r270068,r270069,r270115,r270129,r270287,r270822,r271014,
r271524,r273541,r282967,r283009,r283364.
Add support for reading i2c SFP/SFP+ data from NIC driver and
presenting most interesting fields via ifconfig -v.
This version supports Intel ixgbe driver only.
Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers
* Add new net/sff8436.h containing constants used to access
QSFP+ data via i2c inteface. These constants has been taken
from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard
rev 4.8.
* Add support for printing QSFP+ information from 40G NICs
such as Chelsio T5.
Example:
cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....>
ether 00:07:43:28:ad:08
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet 40Gbase-LR4 <full-duplex>
status: active
plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic)
vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18
module temperature: 64.06 C voltage: 3.26 Volts
lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm)
lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm)
lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm)
lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm)
Tested on: Chelsio T5
Tested on: Mellanox/Huawei passive/active cables/transceivers.
Sponsored by: Yandex LLC
|
| #
259206 |
|
10-Dec-2013 |
np |
MFC r258692 (gnn).
Add constants for use in interrogating various fiber and copper connectors
most often used with network interfaces.
The SFF-8472 standard defines the information that can be retrieved
from an optic or a copper cable plugged into a NIC, most often
referred to as SFP+. Examples of values that can be read
include the cable vendor's name, part number, date of manufacture
as well as running data such as temperature, voltage and tx
and rx power.
Copious comments on how to use these values with an I2C interface
are given in the header file itself.
Discussed with: gnn
|