MFC r362078:

Decode the "LACP Fast Timeout" LAGG option flag

r286700 added the "lacp_fast_timeout" option to `ifconfig', but we forgot to
include the new option in the string used to decode the option bits. Add
"LACP_FAST_TIMO" to LAGG_OPT_BITS.

Also, s/LAGG_OPT_LACP_TIMEOUT/LAGG_OPT_LACP_FAST_TIMO/g , to be clearer that
the flag indicates "Fast Timeout" mode.

MFC r286700

Make LAG LACP fast timeout tunable through IOCTL.

MFC 272159,272161,272386,272446,272547,272548,273210:

- Make lagg protos a enum.

- When reconfiguring protocol on a lagg, first set it to LAGG_PROTO_NONE,
then drop lock, run the attach routines, and then set it to specific
proto. This removes tons of WITNESS warnings.

- Make lagg protocol attach handlers not failing and allocate memory
with M_WAITOK.

- Virtualize lagg(4) cloner. This change fixes a panic when tearing down
if_lagg(4) interfaces which were cloned in a vnet jail.

Sysctl nodes which are dynamically generated for each cloned interface
(net.link.lagg.N.*) have been removed, and use_flowid and flowid_shift
ifconfig(8) parameters have been added instead. Flags and per-interface
statistics counters are displayed in "ifconfig -v".

- Separate option handling from SIOC[SG]LAGG to SIOC[SG]LAGGOPTS for
backward compatibility with old ifconfig(8).

- Move L2 addr configuration for the primary port to a taskqueue. This fixes
LOR of softc rmlock in iflladdr_event handlers.

- Call if_delmulti_ifma() after LACP_UNLOCK(). This fixes another LOR.

- Fix a panic in lacp_transit_expire().

- Fix a panic in lagg_input() upon shutting down a port.

- Use printb() for boolean flags in ro_opts and actor_state for LACP.

- Fix lladdr configuration which could prevent LACP mode from working.

- Fix LORs when a laggport interface has an IPv6 LLA.

MFC r275358 r275483 r276982 - Removing M_FLOWID by hps@

r275358:
Start process of removing the use of the deprecated "M_FLOWID" flag
from the FreeBSD network code. The flag is still kept around in the
"sys/mbuf.h" header file, but does no longer have any users. Instead
the "m_pkthdr.rsstype" field in the mbuf structure is now used to
decide the meaning of the "m_pkthdr.flowid" field. To modify the
"m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX"
macros as defined in the "sys/mbuf.h" header file.

This patch introduces new behaviour in the transmit direction.
Previously network drivers checked if "M_FLOWID" was set in "m_flags"
before using the "m_pkthdr.flowid" field. This check has now now been
replaced by checking if "M_HASHTYPE_GET(m)" is different from
"M_HASHTYPE_NONE". In the future more hashtypes will be added, for
example hashtypes for hardware dedicated flows.

"M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is
valid and has no particular type. This change removes the need for an
"if" statement in TCP transmit code checking for the presence of a
valid flowid value. The "if" statement mentioned above is now a direct
variable assignment which is then later checked by the respective
network drivers like before.

r275483:
Remove M_FLOWID from SCTP code.

r276982:
Remove no longer used "M_FLOWID" flag from mbuf.h and update the netisr
manpage.

Note: The FreeBSD version has been bumped.

Reviewed by: hps, tuexen
Sponsored by: Limelight Networks

MFC r269492:
Improve locking of multicast addresses in VLAN and LAGG interfaces.

This fixes several scenarios of reproducible panics, cause by races
between multicast address changes and interface destruction.

MFC r260070

Multi-queue NIC drivers and multi-port lagg tend to use the same lower
bits of the flowid as each other, resulting in a poor distribution of
packets among queues in certain cases. Work around this by adding a
set of sysctls for controlling a bit-shift on the flowid when doing
multi-port aggrigation in lagg and lacp. By default, lagg/lacp will
now use bits 16 and higher instead of 0 and higher.

Obtained from: Netflix

MFC r286700

Make LAG LACP fast timeout tunable through IOCTL.

MFC 272159,272161,272386,272446,272547,272548,273210:

- Make lagg protos a enum.

- When reconfiguring protocol on a lagg, first set it to LAGG_PROTO_NONE,
then drop lock, run the attach routines, and then set it to specific
proto. This removes tons of WITNESS warnings.

- Make lagg protocol attach handlers not failing and allocate memory
with M_WAITOK.

- Virtualize lagg(4) cloner. This change fixes a panic when tearing down
if_lagg(4) interfaces which were cloned in a vnet jail.

Sysctl nodes which are dynamically generated for each cloned interface
(net.link.lagg.N.*) have been removed, and use_flowid and flowid_shift
ifconfig(8) parameters have been added instead. Flags and per-interface
statistics counters are displayed in "ifconfig -v".

- Separate option handling from SIOC[SG]LAGG to SIOC[SG]LAGGOPTS for
backward compatibility with old ifconfig(8).

- Move L2 addr configuration for the primary port to a taskqueue. This fixes
LOR of softc rmlock in iflladdr_event handlers.

- Call if_delmulti_ifma() after LACP_UNLOCK(). This fixes another LOR.

- Fix a panic in lacp_transit_expire().

- Fix a panic in lagg_input() upon shutting down a port.

- Use printb() for boolean flags in ro_opts and actor_state for LACP.

- Fix lladdr configuration which could prevent LACP mode from working.

- Fix LORs when a laggport interface has an IPv6 LLA.

MFC r275358 r275483 r276982 - Removing M_FLOWID by hps@

r275358:
Start process of removing the use of the deprecated "M_FLOWID" flag
from the FreeBSD network code. The flag is still kept around in the
"sys/mbuf.h" header file, but does no longer have any users. Instead
the "m_pkthdr.rsstype" field in the mbuf structure is now used to
decide the meaning of the "m_pkthdr.flowid" field. To modify the
"m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX"
macros as defined in the "sys/mbuf.h" header file.

This patch introduces new behaviour in the transmit direction.
Previously network drivers checked if "M_FLOWID" was set in "m_flags"
before using the "m_pkthdr.flowid" field. This check has now now been
replaced by checking if "M_HASHTYPE_GET(m)" is different from
"M_HASHTYPE_NONE". In the future more hashtypes will be added, for
example hashtypes for hardware dedicated flows.

"M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is
valid and has no particular type. This change removes the need for an
"if" statement in TCP transmit code checking for the presence of a
valid flowid value. The "if" statement mentioned above is now a direct
variable assignment which is then later checked by the respective
network drivers like before.

r275483:
Remove M_FLOWID from SCTP code.

r276982:
Remove no longer used "M_FLOWID" flag from mbuf.h and update the netisr
manpage.

Note: The FreeBSD version has been bumped.

Reviewed by: hps, tuexen
Sponsored by: Limelight Networks

MFC r269492:
Improve locking of multicast addresses in VLAN and LAGG interfaces.

This fixes several scenarios of reproducible panics, cause by races
between multicast address changes and interface destruction.

MFC r260070

Multi-queue NIC drivers and multi-port lagg tend to use the same lower
bits of the flowid as each other, resulting in a poor distribution of
packets among queues in certain cases. Work around this by adding a
set of sysctls for controlling a bit-shift on the flowid when doing
multi-port aggrigation in lagg and lacp. By default, lagg/lacp will
now use bits 16 and higher instead of 0 and higher.

Obtained from: Netflix