MFC r293613:

Implement vsyscall hack. Prior to 2.13 glibc uses vsyscall
instead of vdso. An upcoming linux_base-c6 needs it.

MFC r283382:

In preparation for switching linuxulator to the use the native 1:1
threads add a hook for cleaning thread resources before the thread die.

Fix COMPAT_FREEBSD32 build on ia64. This is a direct commit to
stable/10 since ia64 is not present in head.

MFC 274817,274878,276801,276840,278976:
Improve support for XSAVE with debuggers.
- Dump an NT_X86_XSTATE note if XSAVE is in use. This note is designed
to match what Linux does in that 1) it dumps the entire XSAVE area
including the fxsave state, and 2) it stashes a copy of the current
xsave mask in the unused padding between the fxsave state and the
xstate header at the same location used by Linux.
- Teach readelf() to recognize NT_X86_XSTATE notes.
- Change PT_GET/SETXSTATE to take the entire XSAVE state instead of
only the extra portion. This avoids having to always make two
ptrace() calls to get or set the full XSAVE state.
- Add a PT_GET_XSTATE_INFO which returns the length of the current
XSTATE save area (so the size of the buffer needed for PT_GETXSTATE)
and the current XSAVE mask (%xcr0).

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Cosmetics: define FREEBSD32_MINUSER and AOUT32_MINUSER for struct
sysentvec .sv_minuser. Also improve style.

Submitted by: Oliver Pinter <oliver.pinter@gmail.com>
MFC after: 1 week

Remove some unnecessary includes.

Eliminate ia32_reg.h by moving its contents to x86 and ia64 reg.h.

Reviewed by: kib

Copy i386 reg.h to x86 and merge with amd64 reg.h. Replace i386/amd64/pc98
reg.h with stubs.

The tREGISTER macros are only made visible on i386. These macros are
deprecated and should not be available on amd64.

The i386 and amd64 versions of struct reg have been renamed to struct
__reg32 and struct __reg64. During compilation either __reg32 or __reg64
is defined as reg depending on the machine architecture. On amd64 the i386
struct is also available as struct reg32 which is used in COMPAT_FREEBSD32
code.

Most of compat/ia32/ia32_reg.h is now IA64 only.

Reviewed by: kib (previous version)

Move userland bits of i386 npx.h and amd64 fpu.h to x86 fpu.h.
Remove FPU types from compat/ia32/ia32_reg.h that are no longer needed.
Create machine/npx.h on amd64 to allow compiling i386 code that uses
this header.

The original npx.h and fpu.h define struct envxmm differently. Both
definitions have been included in the new x86 header as struct __envxmm32
and struct __envxmm64. During compilation either __envxmm32 or __envxmm64
is defined as envxmm depending on machine architecture. On amd64 the i386
struct is also available as struct envxmm32.

Reviewed by: kib

Add support for the extended FPU states on amd64, both for native
64bit and 32bit ABIs. As a side-effect, it enables AVX on capable
CPUs.

In particular:

- Query the CPU support for XSAVE, list of the supported extensions
and the required size of FPU save area. The hw.use_xsave tunable is
provided for disabling XSAVE, and hw.xsave_mask may be used to
select the enabled extensions.

- Remove the FPU save area from PCB and dynamically allocate the
(run-time sized) user save area on the top of the kernel stack,
right above the PCB. Reorganize the thread0 PCB initialization to
postpone it after BSP is queried for save area size.

- The dumppcb, stoppcbs and susppcbs now do not carry the FPU state as
well. FPU state is only useful for suspend, where it is saved in
dynamically allocated suspfpusave area.

- Use XSAVE and XRSTOR to save/restore FPU state, if supported and
enabled.

- Define new mcontext_t flag _MC_HASFPXSTATE, indicating that
mcontext_t has a valid pointer to out-of-struct extended FPU
state. Signal handlers are supplied with stack-allocated fpu
state. The sigreturn(2) and setcontext(2) syscall honour the flag,
allowing the signal handlers to inspect and manipilate extended
state in the interrupted context.

- The getcontext(2) never returns extended state, since there is no
place in the fixed-sized mcontext_t to place variable-sized save
area. And, since mcontext_t is embedded into ucontext_t, makes it
impossible to fix in a reasonable way. Instead of extending
getcontext(2) syscall, provide a sysarch(2) facility to query
extended FPU state.

- Add ptrace(2) support for getting and setting extended state; while
there, implement missed PT_I386_{GET,SET}XMMREGS for 32bit binaries.

- Change fpu_kern KPI to not expose struct fpu_kern_ctx layout to
consumers, making it opaque. Internally, struct fpu_kern_ctx now
contains a space for the extended state. Convert in-kernel consumers
of fpu_kern KPI both on i386 and amd64.

First version of the support for AVX was submitted by Tim Bird
<tim.bird am sony com> on behalf of Sony. This version was written
from scratch.

Tested by: pho (previous version), Yamagi Burmeister <lists yamagi org>
MFC after: 1 month

Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.

The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.

Add support for executing the FreeBSD 1/i386 a.out binaries on amd64.

In particular:
- implement compat shims for old stat(2) variants and ogetdirentries(2);
- implement delivery of signals with ancient stack frame layout and
corresponding sigreturn(2);
- implement old getpagesize(2);
- provide a user-mode trampoline and LDT call gate for lcall $7,$0;
- port a.out image activator and connect it to the build as a module
on amd64.

The changes are hidden under COMPAT_43.

MFC after: 1 month

Extend struct sysvec with new method sv_schedtail, which is used for an
explicit process at fork trampoline path instead of eventhadler(schedtail)
invocation for each child process.

Remove eventhandler(schedtail) code and change linux ABI to use newly added
sysvec method.

While here replace explicit comparing of module sysentvec structure with the
newly created process sysentvec to detect the linux ABI.

Discussed with: kib

MFC after: 2 Week

Create shared (readonly) page. Each ABI may specify the use of page by
setting SV_SHP flag and providing pointer to the vm object and mapping
address. Provide simple allocator to carve space in the page, tailored
to put the code with alignment restrictions.

Enable shared page use for amd64, both native and 32bit FreeBSD
binaries. Page is private mapped at the top of the user address
space, moving a start of the stack one page down. Move signal
trampoline code from the top of the stack to the shared page.

Reviewed by: alc

Add include guards.

MFC after: 3 days

Reorganize syscall entry and leave handling.

Extend struct sysvec with three new elements:
sv_fetch_syscall_args - the method to fetch syscall arguments from
usermode into struct syscall_args. The structure is machine-depended
(this might be reconsidered after all architectures are converted).
sv_set_syscall_retval - the method to set a return value for usermode
from the syscall. It is a generalization of
cpu_set_syscall_retval(9) to allow ABIs to override the way to set a
return value.
sv_syscallnames - the table of syscall names.

Use sv_set_syscall_retval in kern_sigsuspend() instead of hardcoding
the call to cpu_set_syscall_retval().

The new functions syscallenter(9) and syscallret(9) are provided that
use sv_*syscall* pointers and contain the common repeated code from
the syscall() implementations for the architecture-specific syscall
trap handlers.

Syscallenter() fetches arguments, calls syscall implementation from
ABI sysent table, and set up return frame. The end of syscall
bookkeeping is done by syscallret().

Take advantage of single place for MI syscall handling code and
implement ptrace_lwpinfo pl_flags PL_FLAG_SCE, PL_FLAG_SCX and
PL_FLAG_EXEC. The SCE and SCX flags notify the debugger that the
thread is stopped at syscall entry or return point respectively. The
EXEC flag augments SCX and notifies debugger that the process address
space was changed by one of exec(2)-family syscalls.

The i386, amd64, sparc64, sun4v, powerpc and ia64 syscall()s are
changed to use syscallenter()/syscallret(). MIPS and arm are not
converted and use the mostly unchanged syscall() implementation.

Reviewed by: jhb, marcel, marius, nwhitehorn, stas
Tested by: marcel (ia64), marius (sparc64), nwhitehorn (powerpc),
stas (mips)
MFC after: 1 month

Add a forward declaration to silence a warning when compiling ia32_genassym.c.

Reviewed by: kib
MFC after: 3 days

Change the arguments of exec_setregs() so that it receives a pointer
to the image_params struct instead of several members of that struct
individually. This makes it easier to expand its arguments in the future
without touching all platforms.

Reviewed by: jhb

Provide groundwork for 32-bit binary compatibility on non-x86 platforms,
for upcoming 64-bit PowerPC and MIPS support. This renames the COMPAT_IA32
option to COMPAT_FREEBSD32, removes some IA32-specific code from MI parts
of the kernel and enhances the freebsd32 compatibility code to support
big-endian platforms.

Reviewed by: kib, jhb

Make sure that the primary native brandinfo always gets added
first and the native ia32 compat as middle (before other things).
o(ld)brandinfo as well as third party like linux, kfreebsd, etc.
stays on SI_ORDER_ANY coming last.

The reason for this is only to make sure that even in case we would
overflow the MAX_BRANDS sized array, the native FreeBSD brandinfo
would still be there and the system would be operational.

Reviewed by: kib
MFC after: 1 month

Make sure FreeBSD binaries without .note.ABI-tag section work
correctly and do not match a colliding Debian GNU/kFreeBSD
brandinfo statements.
For this mark the Debian GNU/kFreeBSD brandinfo that it must have
an .note.ABI-tag section and ignore the old EI_OSABI brandinfo
when comparing a possibly colliding set of options.

Due to SYSINIT we add the brandinfo in a non-deterministic order,
so native FreeBSD is not always first. We may want to consider
to force native FreeBSD to come first as well.

The only way a problem could currently be noticed is when running an
i386 binary without the .note.ABI-tag on amd64 and the Debian GNU/kFreeBSD
brandinfo was matched first, as the fallback to ld-elf32.so.1 does
not exist in that case.

Reported and tested by: ticso
In collaboration with: kib
MFC after: 3 days

Fix handling of .note.ABI-tag section for GNU systems [1].
Handle GNU/Linux according to LSB Core Specification 4.0,
Chapter 11. Object Format, 11.8. ABI note tag.

Also check the first word of desc, not only name, according to
glibc abi-tags specification to distinguish between Linux and
kFreeBSD.

Add explicit handling for Debian GNU/kFreeBSD, which runs
on our kernels as well [2].

In {amd64,i386}/trap.c, when checking osrel of the current process,
also check the ABI to not change the signal behaviour for Linux
binary processes, now that we save an osrel version for all three
from the lists above in struct proc [2].

These changes make it possible to run FreeBSD, Debian GNU/kFreeBSD
and Linux binaries on the same machine again for at least i386 and
amd64, and no longer break kFreeBSD which was detected as GNU(/Linux).

PR: kern/135468
Submitted by: dchagin [1] (initial patch)
Suggested by: kib [2]
Tested by: Petr Salinger (Petr.Salinger seznam.cz) for kFreeBSD
Reviewed by: kib
MFC after: 3 days

Fix KBI breakage by r190520 which affects older linux.ko binaries:

1) Move the new field (brand_note) to the end of the Brandinfo structure.
2) Add a new flag BI_BRAND_NOTE that indicates that the brand_note pointer
is valid.
3) Use the brand_note field if the flag BI_BRAND_NOTE is set and as old
modules won't have the flag set, so the new field brand_note would be
ignored.

Suggested by: jhb
Reviewed by: jhb
Approved by: kib (mentor)
MFC after: 6 days

Add all segment registers for the amd64 CPU to struct reg and mcontext.
To keep these structures ABI-compatible, half the size of r_trapno,
r_err, mc_trapno, mc_flags.

Add fsbase and gsbase to mcontext on both amd64 and i386.
Add flags to amd64 mcontext to indicate that it contains valid segments
or bases.

In collaboration with: pho
Discussed with: peter
Reviewed by: jhb

Supply AT_EXECPATH auxinfo entry to the interpreter, both for native and
compat32 binaries.

Tested by: pho
Reviewed by: kan

Implement new way of branding ELF binaries by looking to a
".note.ABI-tag" section.

The search order of a brand is changed, now first of all the
".note.ABI-tag" is looked through.

Move code which fetch osreldate for ELF binary to check_note() handler.

PR: 118473
Approved by: kib (mentor)

Add sv_flags field to struct sysentvec with intention to provide description
of the ABI of the currently executing image. Change some places to test
the flags instead of explicit comparing with address of known sysentvec
structures to determine ABI features.

Discussed with: dchagin, imp, jhb, peter

Add support for installing 32-bit system calls from kernel modules. This
includes syscall32_{de,}register() routines as well as a module handler
and wrapper macros similar to the support for native syscalls in
<sys/sysent.h>.

MFC after: 1 month

Change the static struct sysentvec and struct Elf_Brandinfo initializers
to the C99 style. At least, it is easier to read sysent definitions
that way, and search for the actual instances of sigcode etc.

Explicitely initialize sysentvec.sv_maxssiz that was missed in most
sysvecs.

No objection from: jhb
MFC after: 1 month

Allow the ia32 resource limits (compat.ia32.max{dsiz,ssiz,vmem} to be
set via loader tunables. They are already tunable via sysctl.

MFC after: 1 week
Approved by: re (kensmith)

Fix a couple of issues with the stack limit for 32-bit processes on 64-bit
kernels exposed by the recent fixes to resource limits for 32-bit processes
on 64-bit kernels:
- Let ABIs expose their maximum stack size via a new pointer in sysentvec
and use that in preference to maxssiz during exec() rather than always
using maxssiz for all processses.
- Apply the ABI's limit fixup to the previous stack size when adjusting
RLIMIT_STACK to determine if the existing mapping for the stack needs to
be grown or shrunk (as well as how much it should be grown or shrunk).

Approved by: re (kensmith)

Allow FreeBSD's native ELF image activators to execute shared libraries the
same way it was enabled for Linux binares in linuxulator.

This allows binaries built with -pie. Many ports auto-detect -fPIE support
in GCC 4.2 and build binaries FreeBSD was unable to run.

Rework the support for ABIs to override resource limits (used by 32-bit
processes under 64-bit kernels). Previously, each 32-bit process overwrote
its resource limits at exec() time. The problem with this approach is that
the new limits affect all child processes of the 32-bit process, including
if the child process forks and execs a 64-bit process. To fix this, don't
ovewrite the resource limits during exec(). Instead, sv_fixlimits() is
now replaced with a different function sv_fixlimit() which asks the ABI to
sanitize a single resource limit. We then use this when querying and
setting resource limits. Thus, if a 32-bit process sets a limit, then
that new limit will be inherited by future children. However, if the
32-bit process doesn't change a limit, then a future 64-bit child will
see the "full" 64-bit limit rather than the 32-bit limit.

MFC is tentative since it will break the ABI of old linux.ko modules (no
other modules are affected).

MFC after: 1 week

Move some declaration of 32-bit signal structures into file
freebsd32-signal.h, implement sigtimedwait and sigwaitinfo system calls.

Remove kern.elf32.can_exec_dyn sysctl. Instead extend Brandinfo structure
with flags bitfield and set BI_CAN_EXEC_DYN flag for all brands that usually
allow executing elf dynamic binaries (aka shared libraries). When it is
requested to execute ET_DYN elf image check if this flag is on after we
know the elf brand allowing execution if so.

PR: kern/87615
Submitted by: Marcin Koziej <creep@desk.pl>

Catch up to the system siginfo changes. Use a union for the ia32 layout
of siginfo just like the system one. There are now two fields to copy
instead of one.

Calling setrlimit from 32bit apps could potentially increase certain
limits beyond what should be capiable in a 32bit process, so we
must fixup the limits.

Reviewed by: jhb

1. Change prototype of trapsignal and sendsig to use ksiginfo_t *, most
changes in MD code are trivial, before this change, trapsignal and
sendsig use discrete parameters, now they uses member fields of
ksiginfo_t structure. For sendsig, this change allows us to pass
POSIX realtime signal value to user code.

2. Remove cpu_thread_siginfo, it is no longer needed because we now always
generate ksiginfo_t data and feed it to libpthread.

3. Add p_sigqueue to proc structure to hold shared signals which were
blocked by all threads in the proc.

4. Add td_sigqueue to thread structure to hold all signals delivered to
thread.

5. i386 and amd64 now return POSIX standard si_code, other arches will
be fixed.

6. In this sigqueue implementation, pending signal set is kept as before,
an extra siginfo list holds additional siginfo_t data for signals.
kernel code uses psignal() still behavior as before, it won't be failed
even under memory pressure, only exception is when deleting a signal,
we should call sigqueue_delete to remove signal from sigqueue but
not SIGDELSET. Current there is no kernel code will deliver a signal
with additional data, so kernel should be as stable as before,
a ksiginfo can carry more information, for example, allow signal to
be delivered but throw away siginfo data if memory is not enough.
SIGKILL and SIGSTOP have fast path in sigqueue_add, because they can
not be caught or masked.
The sigqueue() syscall allows user code to queue a signal to target
process, if resource is unavailable, EAGAIN will be returned as
specification said.
Just before thread exits, signal queue memory will be freed by
sigqueue_flush.
Current, all signals are allowed to be queued, not only realtime signals.

Earlier patch reviewed by: jhb, deischen
Tested on: i386, amd64

Jumbo-commit to enhance 32 bit application support on 64 bit kernels.
This is good enough to be able to run a RELENG_4 gdb binary against
a RELENG_4 application, along with various other tools (eg: 4.x gcore).
We use this at work.

ia32_reg.[ch]: handle the 32 bit register file format, used by ptrace,
procfs and core dumps.
procfs_*regs.c: vary the format of proc/XXX/*regs depending on the client
and target application.
procfs_map.c: Don't print a 64 bit value to 32 bit consumers, or their
sscanf fails. They expect an unsigned long.
imgact_elf.c: produce a valid 32 bit coredump for 32 bit apps.
sys_process.c: handle 32 bit consumers debugging 32 bit targets. Note
that 64 bit consumers can still debug 32 bit targets.

IA64 has got stubs for ia32_reg.c.

Known limitations: a 5.x/6.x gdb uses get/setcontext(), which isn't
implemented in the 32/64 wrapper yet. We also make a tiny patch to
gdb pacify it over conflicting formats of ld-elf.so.1.

Approved by: re

Fix 32 bit signals on amd64. It turns out that I was sign extending
the register values coming back from sigreturn(2). Normally this wouldn't
matter because the 32 bit environment would truncate the upper 32 bits
and re-save the truncated values at the next trap. However, if we got
a fast second signal and it was pending while we were returning from
sigreturn(2) in the signal trampoline, we'd never have had a chance to
truncate the bogus values in 32 bit mode, and the new sendsig would get
an EFAULT when trying to write to the bogus user stack address.

o Split out kernel part of execve(2) syscall into two parts: one that
copies arguments into the kernel space and one that operates
completely in the kernel space;

o use kernel-only version of execve(2) to kill another stackgap in
linuxlator/i386.

Obtained from: DragonFlyBSD (partially)
MFC after: 2 weeks

Add __elfN(dump_thread). This function is called from __elfN(coredump)
to allow dumping per-thread machine specific notes. On ia64 we use this
function to flush the dirty registers onto the backingstore before we
write out the PRSTATUS notes.

Tested on: alpha, amd64, i386, ia64 & sparc64
Not tested on: arm, powerpc

/usr/libexec/ld-elf.so.1 -> /libexec/ld-elf32.so.1

Check in structure definitions for the FreeBSD-3.x signal syscall stuff.
Nothing uses these yet, but I dont want to lose them.

Change (yet again, sorry!) the path of the 32 bit ld-elf.so.1.

Add a note about the landmine in the middle of struct ia32_sigframe.

DOH!!! Fix signals for freebsd-4.x/i386 binaries. The ucontext has
different alignments due to the sse fxsave dump area.

Locking for the per-process resource limits structure.
- struct plimit includes a mutex to protect a reference count. The plimit
structure is treated similarly to struct ucred in that is is always copy
on write, so having a reference to a structure is sufficient to read from
it without needing a further lock.
- The proc lock protects the p_limit pointer and must be held while reading
limits from a process to keep the limit structure from changing out from
under you while reading from it.
- Various global limits that are ints are not protected by a lock since
int writes are atomic on all the archs we support and thus a lock
wouldn't buy us anything.
- All accesses to individual resource limits from a process are abstracted
behind a simple lim_rlimit(), lim_max(), and lim_cur() API that return
either an rlimit, or the current or max individual limit of the specified
resource from a process.
- dosetrlimit() was renamed to kern_setrlimit() to match existing style of
other similar syscall helper functions.
- The alpha OSF/1 compat layer no longer calls getrlimit() and setrlimit()
(it didn't used the stackgap when it should have) but uses lim_rlimit()
and kern_setrlimit() instead.
- The svr4 compat no longer uses the stackgap for resource limits calls,
but uses lim_rlimit() and kern_setrlimit() instead.
- The ibcs2 compat no longer uses the stackgap for resource limits. It
also no longer uses the stackgap for accessing sysctl's for the
ibcs2_sysconf() syscall but uses kernel_sysctl() instead. As a result,
ibcs2_sysconf() no longer needs Giant.
- The p_rlimit macro no longer exists.

Submitted by: mtm (mostly, I only did a few cleanups and catchups)
Tested on: i386
Compiled on: alpha, amd64

Add an additional field to the elf brandinfo structure to support
quicker exec-time replacement of the elf interpreter on an emulation
environment where an entire /compat/* tree isn't really warranted.

Move the ia32_sigtramp.S file back under amd64/. This interfaces closely
with the sendsig code in the MD area. It is not safe to assume that all
the register conventions will be the same. Also, the way of producing
32 bit code (.code32 directives) in this file is amd64 specific.

Assimilate ia64 back into the fold with the common freebsd32/ia32 code.
The split-up code is derived from the ia64 code originally.

Note that I have only compile-tested this, not actually run-tested it.
The ia64 side of the force is missing some significant chunks of signal
delivery code.

Use the correct syscall table limit

Move a MD 32 bit binary support routine into the MD areas. exec_setregs
is highly MD in an emulation environment since it operates on the host
environment. Although the setregs functions are really for exec support
rather than signals, they deal with the same sorts of context and include
files. So I put it there rather than create yet another file.

Remove some duplicated comments that refer to npx. XXX The setregs
function is actually MD (not MI) though..

Point the description of the fpu data in the context structures to
i386/include/npx.h instead of the host's machine/npx.h (which might not
exist)

Oops, forgot to save these in the editor. Add CTASSERTS for signal and
context related things.

Add CTASSERT()'s to check that the sizes of our replicas of the 32 bit
structures come out the right size.

Fix the ones that broke. stat32 had some missing fields from the end
and statfs32 was broken due to the strange definition of MNAMELEN
(which is dependent on sizeof(long))

I'm not sure if this fixes any actual problems or not.

Add sysentvec->sv_fixlimits() hook so that we can catch cases on 64 bit
systems where the data/stack/etc limits are too big for a 32 bit process.

Move the 5 or so identical instances of ELF_RTLD_ADDR() into imgact_elf.c.

Supply an ia32_fixlimits function. Export the clip/default values to
sysctl under the compat.ia32 heirarchy.

Have mmap(0, ...) respect the current p->p_limits[RLIMIT_DATA].rlim_max
value rather than the sysctl tweakable variable. This allows mmap to
place mappings at sensible locations when limits have been reduced.

Have the imgact_elf.c ld-elf.so.1 placement algorithm use the same
method as mmap(0, ...) now does.

Note that we cannot remove all references to the sysctl tweakable
maxdsiz etc variables because /etc/login.conf specifies a datasize
of 'unlimited'. And that causes exec etc to fail since it can no
longer find space to mmap things.

Switch to using the emulator in the common compat area.
Still work-in-progress.

Initial sweep at dividing up the generic 32bit-on-64bit kernel support
from the ia32 specific stuff. Some of this still needs to move to the MI
freebsd32 area, and some needs to move to the MD area. This is still
work-in-progress.

Use __FBSDID().

Brought to you by: a boring talk at Ottawa Linux Symposium

Deal with the user VM space expanding. 32 bit applications do not like
having their stack at the 512GB mark. Give 4GB of user VM space for 32
bit apps. Note that this is significantly more than on i386 which gives
only about 2.9GB of user VM to a process (1GB for kernel, plus page
table pages which eat user VM space).

Approved by: re (blanket)

Collect the nastiness for preserving the kernel MSR_GSBASE around the
load_gs() calls into a single place that is less likely to go wrong.

Eliminate the per-process context switching of MSR_GSBASE, because it
should be constant for a single cpu. Instead, save/restore it during
the loading of the new %gs selector for the new process.

Approved by: re (amd64/* blanket)

Add BASIC i386 binary support for the amd64 kernel. This is largely
stolen from the ia64/ia32 code (indeed there was a repocopy), but I've
redone the MD parts and added and fixed a few essential syscalls. It
is sufficient to run i386 binaries like /bin/ls, /usr/bin/id (dynamic)
and p4. The ia64 code has not implemented signal delivery, so I had
to do that.

Before you say it, yes, this does need to go in a common place. But
we're in a freeze at the moment and I didn't want to risk breaking ia64.
I will sort this out after the freeze so that the common code is in a
common place.

On the AMD64 side, this required adding segment selector context switch
support and some other support infrastructure. The %fs/%gs etc code
is hairy because loading %gs will clobber the kernel's current MSR_GSBASE
setting. The segment selectors are not used by the kernel, so they're only
changed at context switch time or when changing modes. This still needs
to be optimized.

Approved by: re (amd64/* blanket)

SCARGS removal take II.

Backout removal SCARGS, the code freeze is only "selectively" over.

Remove SCARGS.

Reviewed by: md5

Added fields for VM_MIN_ADDRESS, PS_STRINGS and stack protections to
sysentvec. Initialized all fields of all sysentvecs, which will allow
them to be used instead of constants in more places. Provided stack
fixup routines for emulations that previously used the default.

Infrastructure tweaks to allow having both an Elf32 and an Elf64 executable
handler in the kernel at the same time. Also, allow for the
exec_new_vmspace() code to build a different sized vmspace depending on
the executable environment. This is a big help for execing i386 binaries
on ia64. The ELF exec code grows the ability to map partial pages when
there is a page size difference, eg: emulating 4K pages on 8K or 16K
hardware pages.

Flesh out the i386 emulation support for ia64. At this point, the only
binary that I know of that fails is cvsup, because the cvsup runtime
tries to execute code in pages not marked executable.

Obtained from: dfr (mostly, many tweaks from me).