MFC: r266470, r273546, r276017, r277932, r279153, r279778, r279780, r278797,
r278861, r280283, r280284, r280294, r280452, r280558, r280571, r281863,
r282049, r282357, r282440, r282441, r282358, r282359, r283550, r283918,
r290171, r290667, r290381, r290533, r290666, r292483, r295659, r297545,
r298305, r298383, r298428, r306489, r306557, r307067, r307068, r307087,
r307088, r307089, r307091, r307092, r307093, r307098, r307115, r307154,
r307240, r307241, r315967, r316476

Unbreak BCM2835/RPI-B support by bringing it in line with stable/11 and
head:

- Optimise reading of pending interrupt registers.

- Fix a bug where some DTS layouts could cause the premature ending of the
search (i.e. without returning any result) and you would end up with a
random MAC address.

- Reduce the diff between head and arm_intrng with the bcm2835 interrupt
controller.

- Allow the retrieving of the reserved pins state.

- Add support to the bcm2835 mailbox driver to work before interrupts are
enabled. This will be needed to enable the power on devices early on in the
boot process.

- Add support for enabling the USB on the Raspberry Pi boards when it hasn't
been done by U-Boot. This allows the USB to work when we load the kernel
directly.

- Call config_intrhook_disestablish on failure of the bcm2835 fb and fbd intr
hooks. With this we can get through the boot even if these functions fail.

- Add the structures needed to get/set the power state. These can be used
when, for example, we boot without U-Boot and wish to enable USB, or to
suspend an unneeded device.

- Add a mask to match only the relative base address of BSC controllers.

- Move the code to set the device power to the bcm2835 mailbox driver so it
can be reused by other drivers.

- Add the SOC_BCM2835 and SOC_BCM2836 options for the arm kernel and add the
former to std.bcm2835.

- Add a helper function to read clock frequencies from videocore and use this
to get the default frequency of the sdhci device.

- Add partial support for the Raspberry Pi 2.

- Remove a debug #error from the bcm2835 sdhci driver.

- Fetch the SDHCI frequency from videocore (our prefered source) and only if
it fails, fetch the clock-frequency from DTB. If both methods fail, use the
hardcoded default.

- Pass the supplied buffer length instead of a fixed size.

- Add the routines to query and setup the framebuffer state using the
BCM2835_MBOX_CHAN_PROP channel. The old channel (BCM2835_MBOX_CHAN_FB)
seems deprecated on recent firmware versions and is causing a freeze on
RPi 2.

- Fix DMA on RPi 2. BCM2836 has a different base address for peripherals.

- Enable DMA for sdhci on RPi 2 (BCM2836).

- Add a missing wakeup when releasing ownership of the SPI hardware.

- Fix framebuffer compatibility with new RPi firmware.

- Refactor bcm2835_cpufreq to use bcm2835_mbox_property API.

- Fix the sc(4) framebuffer driver on RPi 2.

- Fix the vt(4) framebuffer driver on RPi 2.

- Remove unused mutex and softc variables.

- Refactor mailbox property API to make it usable for /dev/vcio driver.

- Replace semaphore-base locking with sleep/wait synchronization.

- Fix infinite loop if response from VideoCore never received.

- Set have_message in interrupt to handle "response before READ" case.

- Serialize access to property channel when using bcm2835_mbox_property.

- Force framebuffer virtual viewport to be the same as physical.

- Use proper type of tag in bcm2835_mbox_fb_init.

- bcm2835_cpufreq: Only attach driver if we correcly match on the machine
compatible string.

- Add dev.fb.X.resync sysctl to resync ARM framebuffer with VideoCore.

- Do not use DMA channels used by GPU.

- Define local-intc for BCM2836 platform (RPI2) and make BCM2835 intc
a child of it.

- Fix build for Pi kernels with syscons enabled.

- Use VM_MEMATTR_WRITE_COMBINING memattr for mmap(2) on framebuffer.

- Make intc driver compatible with upstream DTS.

- Make Rapsberry Pi watchdog driver compatible with upstream DTS.

- Make sure intc is attached before interrupt consumers.

- Make framebuffer driver compatible with upstream DT.

- Add one more heuristic to determine MAC address of the SMSC device.

- Add compatibility strings from upstream DT.

- Fix spelling mistake, BCM2835_PASWORD -> BCM2835_PASSWORD.

Approved by: re (kib)

MFC r256871, r259034, r266010

r256871:
Implement watchdog function and register it with watchdog list.

r259034:
Make the sysctl node read-only.

r266010:
Remove extra newlines.
No functional changes.

MFC r261423, r261424, r261516, r261513, r261562, r261563, r261564, r261565,
r261596, r261606

Add the imx sdhci controller.

Move Open Firmware device root on PowerPC, ARM, and MIPS systems to
a sub-node of nexus (ofwbus) rather than direct attach under nexus. This
fixes FDT on x86 and will make coexistence with ACPI on ARM systems easier.
SPARC is unchanged.

Add the missing ')' at end of sentence. Reword it to use a more common idiom.

Pass the kernel physical address to initarm through the boot param struct.

Make functions only used in vfp.c static, and remove vfp_enable.

Fix __syscall on armeb EABI. As it returns a 64-bit value it needs to
place 32-bit data in r1, not r0. 64-bit data is already packed correctly.

Use abp_physaddr for the physical address over KERNPHYSADDR. This helps us
remove the need to load the kernel at a fixed address.

Remove references to PHYSADDR where it's used only in debugging output.

Dynamically generate the page table. This will allow us to detect the
physical address we are loaded at to change the mapping.

MFC r257738, r259202, r258410, r260288, r260292, r260294, r260320, r260323,
r260326, r260327, r260331, r260333, r260340, r260371, r260372, r260373,
r260374, r260375

Add common bus_space tag definition shared for most supported ARMv6/v7 SoCs.
Correct license statements to reflect the fact that these files were all
derived from sys/arm/mv/bus_space.c.

In pmap_unmapdev(), remember the size, and use that as an argument to
kva_free(), or we'd end up always passing it a size of 0

In pmap_mapdev(), first check whether a static mapping exists,

Convert TI static device mapping to use the new arm_devmap_add_entry(),

Use the common armv6 fdt_bus_tag defintion for tegra instead of a local copy.

Eliminate use of fdt_immr_addr(), it's not needed for tegra

Convert lpc from using fdt_immr style to arm_devmap_add_entry() to make
static device mappings.

Retire machine/fdt.h as a header used by MI code, as its function is now
obsolete. This involves the following pieces:
- Remove it entirely on PowerPC, where it is not used by MD code either
- Remove all references to machine/fdt.h in non-architecture-specific code
(aside from uart_cpu_fdt.c, shared by ARM and MIPS, and so is somewhat
non-arch-specific).
- Fix code relying on header pollution from machine/fdt.h includes
- Legacy fdtbus.c (still used on x86 FDT systems) now passes resource
requests to its parent (nexus). This allows x86 FDT devices to allocate
both memory and IO requests and removes the last notionally MI use of
fdtbus_bs_tag.
- On those architectures that retain a machine/fdt.h, unused bits like
FDT_MAP_IRQ and FDT_INTR_MAX have been removed.

Add #include <machine/fdt.h> to a few files that used to get it via pollution

Enable the mv cesa security/crypto device by providing the required property
in the dts source, and adding the right devices to the kernel config.

Remove dev/fdt/fdt_pci.c, which was code specific to Marvell ARM SoCs,
related to setting up static device mappings. Since it was only used by
arm/mv/mv_pci.c, it's now just static functions within that file, plus
one public function that gets called only from arm/mv/mv_machdep.c.

Switch RPi to using arm_devmap_add_entry() to set up static device mapping.

Allow 'no static device mappings' to potentially work.

Don't try to find a static mapping before calling pmap_mapdev(), that logic
is now part of pmap_mapdev() and doesn't need to be duplicated here.

Switch a10 to using arm_devmap_add_entry() to set up static device mapping.

MFC r259517, r259518

Add vt support for RPi. (No early stage yet.)

MFC r256871, r259034, r266010

r256871:
Implement watchdog function and register it with watchdog list.

r259034:
Make the sysctl node read-only.

r266010:
Remove extra newlines.
No functional changes.

MFC r261423, r261424, r261516, r261513, r261562, r261563, r261564, r261565,
r261596, r261606

Add the imx sdhci controller.

Move Open Firmware device root on PowerPC, ARM, and MIPS systems to
a sub-node of nexus (ofwbus) rather than direct attach under nexus. This
fixes FDT on x86 and will make coexistence with ACPI on ARM systems easier.
SPARC is unchanged.

Add the missing ')' at end of sentence. Reword it to use a more common idiom.

Pass the kernel physical address to initarm through the boot param struct.

Make functions only used in vfp.c static, and remove vfp_enable.

Fix __syscall on armeb EABI. As it returns a 64-bit value it needs to
place 32-bit data in r1, not r0. 64-bit data is already packed correctly.

Use abp_physaddr for the physical address over KERNPHYSADDR. This helps us
remove the need to load the kernel at a fixed address.

Remove references to PHYSADDR where it's used only in debugging output.

Dynamically generate the page table. This will allow us to detect the
physical address we are loaded at to change the mapping.

MFC r257738, r259202, r258410, r260288, r260292, r260294, r260320, r260323,
r260326, r260327, r260331, r260333, r260340, r260371, r260372, r260373,
r260374, r260375

Add common bus_space tag definition shared for most supported ARMv6/v7 SoCs.
Correct license statements to reflect the fact that these files were all
derived from sys/arm/mv/bus_space.c.

In pmap_unmapdev(), remember the size, and use that as an argument to
kva_free(), or we'd end up always passing it a size of 0

In pmap_mapdev(), first check whether a static mapping exists,

Convert TI static device mapping to use the new arm_devmap_add_entry(),

Use the common armv6 fdt_bus_tag defintion for tegra instead of a local copy.

Eliminate use of fdt_immr_addr(), it's not needed for tegra

Convert lpc from using fdt_immr style to arm_devmap_add_entry() to make
static device mappings.

Retire machine/fdt.h as a header used by MI code, as its function is now
obsolete. This involves the following pieces:
- Remove it entirely on PowerPC, where it is not used by MD code either
- Remove all references to machine/fdt.h in non-architecture-specific code
(aside from uart_cpu_fdt.c, shared by ARM and MIPS, and so is somewhat
non-arch-specific).
- Fix code relying on header pollution from machine/fdt.h includes
- Legacy fdtbus.c (still used on x86 FDT systems) now passes resource
requests to its parent (nexus). This allows x86 FDT devices to allocate
both memory and IO requests and removes the last notionally MI use of
fdtbus_bs_tag.
- On those architectures that retain a machine/fdt.h, unused bits like
FDT_MAP_IRQ and FDT_INTR_MAX have been removed.

Add #include <machine/fdt.h> to a few files that used to get it via pollution

Enable the mv cesa security/crypto device by providing the required property
in the dts source, and adding the right devices to the kernel config.

Remove dev/fdt/fdt_pci.c, which was code specific to Marvell ARM SoCs,
related to setting up static device mappings. Since it was only used by
arm/mv/mv_pci.c, it's now just static functions within that file, plus
one public function that gets called only from arm/mv/mv_machdep.c.

Switch RPi to using arm_devmap_add_entry() to set up static device mapping.

Allow 'no static device mappings' to potentially work.

Don't try to find a static mapping before calling pmap_mapdev(), that logic
is now part of pmap_mapdev() and doesn't need to be duplicated here.

Switch a10 to using arm_devmap_add_entry() to set up static device mapping.

MFC r259517, r259518

Add vt support for RPi. (No early stage yet.)