MFC r326140: vmrun.sh: add -A option for AHCI emulation of disk devices

MFC: r314694

Make vmrun.sh passthrough -u and -w to bhybe

PR: 214273
Submitted by: Martin Birgmeier <la5lb...@aon.at>
Approved by: grehan (mentor)

MFC 273102:
Use '-e' to check if the virtio backing file has already been created.

The '-f' check works fine on a regular file but not if the backing file is
a device (e.g., /dev/md0). In this case it would print a misleading but
otherwise benign message about the backing file not being present.

PR: 210410

MFC r284539, r284630, r284688, r284877, r285217, r285218,
r286837, r286838, r288470, r288522, r288524, r288826,
r289001

Pull in bhyve bug fixes and changes to allow UEFI booting.
This provides Windows support.

Tested on Intel and AMD with:
- Arch Linux i386+amd64 (kernel 4.3.3)
- Ubuntu 15.10 server 64-bit
- FreeBSD-CURRENT/amd64 20160127 snap
- FreeBSD 10.2 i386+amd64
- OpenBSD 5.8 i386+amd64
- SmartOS latest
- Windows 10 build 1511'

Huge thanks to Yamagi Burmeister who submitted the patch
and did the majority of the testing.

r284539 - bootrom mem allocation support
r284630 - Add SO_REUSEADDR when starting debug port
r284688 - Fix a regression in "movs" emulation
r284877 - verify_gla() non-zero segment base fix
r285217 - Always assert DCD and DSR in the uart
r285218 - devmem nodes moved to /dev/vmm.io/
r286837 - Add define for SATA Check-Power-Mode
r286838 - Add simple (no-op) SATA cmd emulations
r288470 - Increase virtio-blk indirect descs
r288522 - Firmware guest query interface
r288524 - Fix post-test typo
r288826 - Clean up SATA unimplemented cmd msg
r289001 - Add -l option to specify userboot path

Submitted by: Yamagi Burmeister
Approved by: re (kib)

MFC r279444:
Allow passthrough devices to be hinted.

MFC r279683:
When ICW1 is issued the edge sense circuit is reset which means that
following an initialization a low-to-high transistion is necesary to
generate an interrupt.

MFC r279925:
Add -p parameter to list PCI device to pass through to the guest.

MFC r281559:
Fix handling of BUS_PROBE_NOWILDCARD in 'device_probe_child()'.

MFC r280447:
When fetching an instruction in non-64bit mode, consider the value of the
code segment base address.

MFC r280725:
Move legacy interrupt allocation for virtio devices to common code.

MFC r280775:
Fix the RTC device model to operate correctly in 12-hour mode.

MFC r280929:
Fix "MOVS" instruction memory to MMIO emulation.

MFC r280968:
Display instruction bytes and %rip prior to aborting due to an instruction
emulation error.

MFC r281145:
Enhance the support for Group 1 Extended opcodes for CMP, AND, OR instructions.

MFC r281542:
Initialize 'error' before use (Coverity IDs 1249748, 1249747, 1249751, 1249749)

MFC r281561:
Prior to aborting due to an ioport error, it is always interesting to see what
the guest's %rip is.

MFC r281611:
If the number of guest vcpus is less than '1' then flag it as an error.

MFC r281612:
Prefer 'vcpu_should_yield()' over checking 'curthread->td_flags' directly.

MFC r281630:
Relax the check on which vectors can be delivered through the APIC. According
to the Intel SDM vectors 16 through 255 are allowed to be delivered via the
local APIC.

MFC r281879:
Missing break in switch case (Coverity ID 1292499)

MFC r281946:
Don't allow guest to modify readonly bits in the PCI config 'status' register.

MFC r281987:
STOS/STOSB/STOSW/STOSD/STOSQ instruction emulation.

MFC r282206:
Implement the century byte in the RTC.

MFC r276428:
Replace bhyve's minimal RTC emulation with a fully featured one in vmm.ko.

MFC r276432:
Initialize all fields of 'struct vm_exception exception' before passing it
to vm_inject_exception().

MFC r276763:
Clear blocking due to STI or MOV SS in the hypervisor when an instruction is
emulated or when the vcpu incurs an exception.

MFC r277149:
Clean up usage of 'struct vm_exception' to only to communicate information
from userspace to vmm.ko when injecting an exception.

MFC r277168:
Fix typo (missing comma).

MFC r277309:
Make the error message explicit instead of just printing the usage if the
virtual machine name is not specified.

MFC r277310:
Simplify instruction restart logic in bhyve.

MFC r277359:
Fix a bug in libvmmapi 'vm_copy_setup()' where it would return success even
if the 'gpa' was in the guest MMIO region.

MFC r277360:
MOVS instruction emulation.

MFC r277626:
Add macro to identify AVIC capability (advanced virtual interrupt controller)
in AMD processors.

MFC r279220:
Don't close a block context if it couldn't be opened avoiding a null deref.

MFC r279225:
Add "-u" option to bhyve(8) to indicate that the RTC should maintain UTC time.

MFC r279227:
Emulate MSR 0xC0011024 when running on AMD processors.

MFC r279228:
Always emulate MSR_PAT on Intel processors and don't rely on PAT save/restore
capability of VT-x. This lets bhyve run nested in older VMware versions that
don't support the PAT save/restore capability.

MFC r279540:
Fix warnings/errors when building vmm.ko with gcc.

MFC r284024: bhyve/vmrun.sh: pass all existing readable disks to bhyveload(8)

MFC r284023: bhyve/vmrun.sh: support passing disk options same as for bhyve(8)

MFC r271447, r271496
- Attach the ISO to an ahci-cd emulated device
- Propagate the error status of /usr/sbin/bhyve

Approved by:re (delphij)

MFC r270512 r270513 r270754
- add comments which describe exit status codes of /usr/sbin/bhyve
- move bhyvectl --destroy outside of the while loop
- Use "file -s" so that we can run vmrun.sh against special devces such as
/dev/md memory files systems or zvols

MFC 256657,257423,264837,267559:
Sync vmrun.sh with HEAD:
- Add -e option to vmrun.sh passed to bhyveload(8) to set loader
environment variables.
- Stop passing unused -I option to bhyve(8).
- Reformat the usage to fit in 80 colums and other cleanups.
- Add -C option to specify the console device.
- Add -H option to pass a host path to bhyveload(8).
- Support for multiple disk and tap devices.

MFC 267963:
The latest versoin of file/libmagic identifes a filesystem image
is identified as "DOS/MBR boot sector" as opposed to "x86 boot sector".

This trips up vmrun.sh when using the new file(1) and makes it want to boot
into the installer instead.

Fix this by just looking for "boot sector" instead.

MFC r257293.

Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached
to a virtual machine then we implicitly create COM1 and COM2 ISA devices.

Prior to this change the only way of attaching a COM port to the virtual
machine was by presenting it as a PCI device that is mapped at the legacy
I/O address 0x3F8 or 0x2F8.

There were some issues with the original approach:
- It did not work at all with UEFI because UEFI will reprogram the PCI device
BARs and remap the COM1/COM2 ports at non-legacy addresses.
- OpenBSD GENERIC kernel does not create a /dev/console because it expects
the uart device at the legacy 0x3F8/0x2F8 address to be an ISA device.
- It was functional with a FreeBSD guest but caused the console to appear
on /dev/ttyu2 which was not intuitive.

The uart emulation is now independent of the bus on which it resides. Thus it
is possible to have uart devices on the PCI bus in addition to the legacy
COM1/COM2 devices behind the LPC bus.

The command line option to attach ISA COM1/COM2 ports to a virtual machine is
"-s <bus>,lpc -l com1,stdio".

The command line option to create a PCI-attached uart device is:
"-s <bus>,uart[,stdio]"

The command line option to create PCI-attached COM1/COM2 device is:
"-S <bus>,uart[,stdio]". This style of creating COM ports is deprecated.

Approved by: re (glebius)

MFC r279444:
Allow passthrough devices to be hinted.

MFC r279683:
When ICW1 is issued the edge sense circuit is reset which means that
following an initialization a low-to-high transistion is necesary to
generate an interrupt.

MFC r279925:
Add -p parameter to list PCI device to pass through to the guest.

MFC r281559:
Fix handling of BUS_PROBE_NOWILDCARD in 'device_probe_child()'.

MFC r280447:
When fetching an instruction in non-64bit mode, consider the value of the
code segment base address.

MFC r280725:
Move legacy interrupt allocation for virtio devices to common code.

MFC r280775:
Fix the RTC device model to operate correctly in 12-hour mode.

MFC r280929:
Fix "MOVS" instruction memory to MMIO emulation.

MFC r280968:
Display instruction bytes and %rip prior to aborting due to an instruction
emulation error.

MFC r281145:
Enhance the support for Group 1 Extended opcodes for CMP, AND, OR instructions.

MFC r281542:
Initialize 'error' before use (Coverity IDs 1249748, 1249747, 1249751, 1249749)

MFC r281561:
Prior to aborting due to an ioport error, it is always interesting to see what
the guest's %rip is.

MFC r281611:
If the number of guest vcpus is less than '1' then flag it as an error.

MFC r281612:
Prefer 'vcpu_should_yield()' over checking 'curthread->td_flags' directly.

MFC r281630:
Relax the check on which vectors can be delivered through the APIC. According
to the Intel SDM vectors 16 through 255 are allowed to be delivered via the
local APIC.

MFC r281879:
Missing break in switch case (Coverity ID 1292499)

MFC r281946:
Don't allow guest to modify readonly bits in the PCI config 'status' register.

MFC r281987:
STOS/STOSB/STOSW/STOSD/STOSQ instruction emulation.

MFC r282206:
Implement the century byte in the RTC.

MFC r276428:
Replace bhyve's minimal RTC emulation with a fully featured one in vmm.ko.

MFC r276432:
Initialize all fields of 'struct vm_exception exception' before passing it
to vm_inject_exception().

MFC r276763:
Clear blocking due to STI or MOV SS in the hypervisor when an instruction is
emulated or when the vcpu incurs an exception.

MFC r277149:
Clean up usage of 'struct vm_exception' to only to communicate information
from userspace to vmm.ko when injecting an exception.

MFC r277168:
Fix typo (missing comma).

MFC r277309:
Make the error message explicit instead of just printing the usage if the
virtual machine name is not specified.

MFC r277310:
Simplify instruction restart logic in bhyve.

MFC r277359:
Fix a bug in libvmmapi 'vm_copy_setup()' where it would return success even
if the 'gpa' was in the guest MMIO region.

MFC r277360:
MOVS instruction emulation.

MFC r277626:
Add macro to identify AVIC capability (advanced virtual interrupt controller)
in AMD processors.

MFC r279220:
Don't close a block context if it couldn't be opened avoiding a null deref.

MFC r279225:
Add "-u" option to bhyve(8) to indicate that the RTC should maintain UTC time.

MFC r279227:
Emulate MSR 0xC0011024 when running on AMD processors.

MFC r279228:
Always emulate MSR_PAT on Intel processors and don't rely on PAT save/restore
capability of VT-x. This lets bhyve run nested in older VMware versions that
don't support the PAT save/restore capability.

MFC r279540:
Fix warnings/errors when building vmm.ko with gcc.

MFC r284024: bhyve/vmrun.sh: pass all existing readable disks to bhyveload(8)

MFC r284023: bhyve/vmrun.sh: support passing disk options same as for bhyve(8)

MFC r271447, r271496
- Attach the ISO to an ahci-cd emulated device
- Propagate the error status of /usr/sbin/bhyve

Approved by:re (delphij)

MFC r270512 r270513 r270754
- add comments which describe exit status codes of /usr/sbin/bhyve
- move bhyvectl --destroy outside of the while loop
- Use "file -s" so that we can run vmrun.sh against special devces such as
/dev/md memory files systems or zvols

MFC 256657,257423,264837,267559:
Sync vmrun.sh with HEAD:
- Add -e option to vmrun.sh passed to bhyveload(8) to set loader
environment variables.
- Stop passing unused -I option to bhyve(8).
- Reformat the usage to fit in 80 colums and other cleanups.
- Add -C option to specify the console device.
- Add -H option to pass a host path to bhyveload(8).
- Support for multiple disk and tap devices.

MFC 267963:
The latest versoin of file/libmagic identifes a filesystem image
is identified as "DOS/MBR boot sector" as opposed to "x86 boot sector".

This trips up vmrun.sh when using the new file(1) and makes it want to boot
into the installer instead.

Fix this by just looking for "boot sector" instead.

MFC r257293.

Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached
to a virtual machine then we implicitly create COM1 and COM2 ISA devices.

Prior to this change the only way of attaching a COM port to the virtual
machine was by presenting it as a PCI device that is mapped at the legacy
I/O address 0x3F8 or 0x2F8.

There were some issues with the original approach:
- It did not work at all with UEFI because UEFI will reprogram the PCI device
BARs and remap the COM1/COM2 ports at non-legacy addresses.
- OpenBSD GENERIC kernel does not create a /dev/console because it expects
the uart device at the legacy 0x3F8/0x2F8 address to be an ISA device.
- It was functional with a FreeBSD guest but caused the console to appear
on /dev/ttyu2 which was not intuitive.

The uart emulation is now independent of the bus on which it resides. Thus it
is possible to have uart devices on the PCI bus in addition to the legacy
COM1/COM2 devices behind the LPC bus.

The command line option to attach ISA COM1/COM2 ports to a virtual machine is
"-s <bus>,lpc -l com1,stdio".

The command line option to create a PCI-attached uart device is:
"-s <bus>,uart[,stdio]"

The command line option to create PCI-attached COM1/COM2 device is:
"-S <bus>,uart[,stdio]". This style of creating COM ports is deprecated.

Approved by: re (glebius)