MFC: r306375

Add a WITHOUT_DIALOG src.conf(5) knob.

It also turns off dependencies (bsdinstall, bsdconfig, dpv, tzsetup).

MFC r312937:

Fix typo in lib/Makefile

The SUBDIR_DEPEND variable should be for librpcsec_gss, not
liblibrpc_gss

PR: 216409

MFC 278320,278336,278830,285621:
Add devctl(8): a utility for manipulating new-bus devices. Note that
this version does not include the 'suspend' and 'resume' commands
present in HEAD as those depend on larger changes to the suspend and
resume code in the kernel.

278320:
Add a new device control utility for new-bus devices called devctl. This
allows the user to request administrative changes to individual devices
such as attach or detaching drivers or disabling and re-enabling devices.
- Add a new /dev/devctl2 character device which uses ioctls for device
requests. The ioctls use a common 'struct devreq' which is somewhat
similar to 'struct ifreq'.
- The ioctls identify the device to operate on via a string. This
string can either by the device's name, or it can be a bus-specific
address. (For unattached devices, a bus address is the only way to
locate a device.) Bus drivers register an eventhandler to claim
unrecognized device names that the driver recognizes as a valid address.
Two buses currently support addresses: ACPI recognizes any device
in the ACPI namespace via its full path starting with "\" and
the PCI bus driver recognizes an address specification of
'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector
strings supported by pciconf).
- To make it easier to cut and paste, change the PnP location string
in the PCI bus driver to output a full PCI selector string rather
than 'slot=<slot> function=<func>'.
- Add a devctl(3) interface in libdevctl which provides a wrapper around
the ioctls and is the preferred interface for other userland code.
- Add a devctl(8) program which is a simple wrapper around the requests
supported by devctl(3).
- Add a resource_unset_value() function that can be used to remove a
hint from the kernel environment. This is used to clear a
hint.<driver>.<unit>.disabled hint when re-enabling a boot-time
disabled device.

278336:
Unbreak the build (memchr is explicitly required by devctl(9) after r278320)

278830:
install the man page...

285621:
Fix formatting.

Approved by: re (marius)

MFC r292337, r292552, r292553:

Build mount_smbfs for arm. Also sort the subdirs.

Avoid unaligned memory accesses when encoding netbios names in libsmb.

The current code for encoding a netbios name converts each byte to a 16-bit
value and stores the result by casting a char* to u_short*, resulting in
alignment faults on strict-alignment platforms.

This change reimplements the encoding routine using only byte accesses to
memory. There is no particular reason to work with 16-bit values just
because the encoding process creates two bytes of output for every byte of
input. Working a byte at at time also avoids endian problems for big-endian
platforms.

Make the building of libsmb and mount_smbfs unconditional, now that r292552
has eliminated alignment and endian problems that were making it fail on
some platforms.

PR: 180438
PR: 189415
Relnotes: Yes

MFC nv(3) and part of nv(9) to stable/10

This includes the following revisions from head:

r258065,r258594,r259430,r260222,r261407,r261408,r263479,r264021,r266351,
r269603,r271026,r271027,r271028,r271241,r271578,r271579,r271847,r272102,
r272843,r273752,r277920,r277921,r277925,r277926,r277927,r279421,r279422,
r279423,r279424,r279425,r279426,r279427,r279428,r279429,r279430,r279431,
r279432,r279434,r279435,r279436,r279438,r279439,r279440,r279760,r282122,
r282254,r282257,r282304,r282312,r285339,r288340

This change reverts stable/10@r282122 and stable/10@r288340, and re-MFCs the
series again (r282122, r285339, and r288340).

More changes are pending to nv(9)/pci(4) after further review/work. Please see
the Phabricator review for more details (both https://reviews.freebsd.org/D4232
and https://reviews.freebsd.org/D4249 ).

- Tested with:
-- Booting VMware Fusion 8.1.0 running on a Haswell Apple Macbook Pro
-- Booting a Haswell machine with zfs and running some stress workloads with
VirtualBox guests
-- make tinderbox
-- kyua test -k /usr/tests/lib/libnv

Differential Revision: https://reviews.freebsd.org/D4249 (part of a larger diff)
Relnotes: yes
Reviewed by: oshogbo (implicit), sbruno (implicit)
Submitted by: Kevin Bowling <kevin.bowling@kev009.com>
Sponsored by: EMC / Isilon Storage Division

MFC: xz 5.2.2.

Relnotes: yes

MFC r282821: Remove redundant csu subdir logic

The appropriate subdirectories are handled by lib/csu/Makefile. There's
no need to duplicate this logic in Makefile.inc1 and lib/Makefile.

Sponsored by: The FreeBSD Foundation

MFC r283502:

Remove SUBDIR_DEPEND for non-existent libreadline directory

libreadline lives under gnu/lib

MFC sa(4) and mt(1) improvements.

This includes these changes: 279219, 279229, 279261, 279534, 279570,
280230, 280231.

In addition, bump __FreeBSD_version for the addition of the new
mtio(4) / sa(4) ioctls.

Thanks to Dan Langille, Harald Schmalzbauer and Rudolf Cejka for spending
a significant amount of time and effort testing these changes.

------------------------------------------------------------------------
r279219 | ken | 2015-02-23 14:59:30 -0700 (Mon, 23 Feb 2015) | 282 lines

Significant upgrades to sa(4) and mt(1).

The primary focus of these changes is to modernize FreeBSD's
tape infrastructure so that we can take advantage of some of the
features of modern tape drives and allow support for LTFS.

Significant changes and new features include:

o sa(4) driver status and parameter information is now exported via an
XML structure. This will allow for changes and improvements later
on that will not break userland applications. The old MTIOCGET
status ioctl remains, so applications using the existing interface
will not break.

o 'mt status' now reports drive-reported tape position information
as well as the previously available calculated tape position
information. These numbers will be different at times, because
the drive-reported block numbers are relative to BOP (Beginning
of Partition), but the block numbers calculated previously via
sa(4) (and still provided) are relative to the last filemark.
Both numbers are now provided. 'mt status' now also shows the
drive INQUIRY information, serial number and any position flags
(BOP, EOT, etc.) provided with the tape position information.
'mt status -v' adds information on the maximum possible I/O size,
and the underlying values used to calculate it.

o The extra sa(4) /dev entries (/dev/saN.[0-3]) have been removed.

The extra devices were originally added as place holders for
density-specific device nodes. Some OSes (NetBSD, NetApp's OnTap
and Solaris) have had device nodes that, when you write to them,
will automatically select a given density for particular tape drives.

This is a convenient way of switching densities, but it was never
implemented in FreeBSD. Only the device nodes were there, and that
sometimes confused users.

For modern tape devices, the density is generally not selectable
(e.g. with LTO) or defaults to the highest availble density when
the tape is rewritten from BOT (e.g. TS11X0). So, for most users,
density selection won't be necessary. If they do need to select
the density, it is easy enough to use 'mt density' to change it.

o Protection information is now supported. This is either a
Reed-Solomon CRC or CRC32 that is included at the end of each block
read and written. On write, the tape drive verifies the CRC, and
on read, the tape drive provides a CRC for the userland application
to verify.

o New, extensible tape driver parameter get/set interface.

o Density reporting information. For drives that support it,
'mt getdensity' will show detailed information on what formats the
tape drive supports, and what formats the tape drive supports.

o Some mt(1) functionality moved into a new mt(3) library so that
external applications can reuse the code.

o The new mt(3) library includes helper routines to aid in parsing
the XML output of the sa(4) driver, and build a tree of driver
metadata.

o Support for the MTLOAD (load a tape in the drive) and MTWEOFI
(write filemark immediate) ioctls needed by IBM's LTFS
implementation.

o Improve device departure behavior for the sa(4) driver. The previous
implementation led to hangs when the device was open.

o This has been tested on the following types of drives:
IBM TS1150
IBM TS1140
IBM LTO-6
IBM LTO-5
HP LTO-2
Seagate DDS-4
Quantum DLT-4000
Exabyte 8505
Sony DDS-2

contrib/groff/tmac/doc-syms,
share/mk/bsd.libnames.mk,
lib/Makefile,
Add libmt.

lib/libmt/Makefile,
lib/libmt/mt.3,
lib/libmt/mtlib.c,
lib/libmt/mtlib.h,
New mt(3) library that contains functions moved from mt(1) and
new functions needed to interact with the updated sa(4) driver.

This includes XML parser helper functions that application writers
can use when writing code to query tape parameters.

rescue/rescue/Makefile:
Add -lmt to CRUNCH_LIBS.

src/share/man/man4/mtio.4
Clarify this man page a bit, and since it contains what is
essentially the mtio.h header file, add new ioctls and structure
definitions from mtio.h.

src/share/man/man4/sa.4
Update BUGS and maintainer section.

sys/cam/scsi/scsi_all.c,
sys/cam/scsi/scsi_all.h:
Add SCSI SECURITY PROTOCOL IN/OUT CDB definitions and CDB building
functions.

sys/cam/scsi/scsi_sa.c
sys/cam/scsi/scsi_sa.h
Many tape driver changes, largely outlined above.

Increase the sa(4) driver read/write timeout from 4 to 32
minutes. This is based on the recommended values for IBM LTO
5/6 drives. This may also avoid timeouts for other tape
hardware that can take a long time to do retries and error
recovery. Longer term, a better way to handle this is to ask
the drive for recommended timeout values using the REPORT
SUPPORTED OPCODES command. Modern IBM and Oracle tape drives
at least support that command, and it would allow for more
accurate timeout values.

Add XML status generation. This is done with a series of
macros to eliminate as much duplicate code as possible. The
new XML-based status values are reported through the new
MTIOCEXTGET ioctl.

Add XML driver parameter reporting, using the new MTIOCPARAMGET
ioctl.

Add a new driver parameter setting interface, using the new
MTIOCPARAMSET and MTIOCSETLIST ioctls.

Add a new MTIOCRBLIM ioctl to get block limits information.

Add CCB/CDB building routines scsi_locate_16, scsi_locate_10,
and scsi_read_position_10().

scsi_locate_10 implements the LOCATE command, as does the
existing scsi_set_position() command. It just supports
additional arguments and features. If/when we figure out a
good way to provide backward compatibility for older
applications using the old function API, we can just revamp
scsi_set_position(). The same goes for
scsi_read_position_10() and the existing scsi_read_position()
function.

Revamp sasetpos() to take the new mtlocate structure as an
argument. It now will use either scsi_locate_10() or
scsi_locate_16(), depending upon the arguments the user
supplies. As before, once we change position we don't have a
clear idea of what the current logical position of the tape
drive is.

For tape drives that support long form position data, we
read the current position and store that for later reporting
after changing the position. This should help applications
like Bacula speed tape access under FreeBSD once they are
modified to support the new ioctls.

Add a new quirk, SA_QUIRK_NO_LONG_POS, that is set for all
drives that report SCSI-2 or older, as well as drives that
report an Illegal Request type error for READ POSITION with
the long format. So we should automatically detect drives
that don't support the long form and stop asking for it after
an initial try.

Add a partition number to the sa(4) softc.

Improve device departure handling. The previous implementation
led to hangs when the device was open.

If an application had the sa(4) driver open, and attempted to
close it after it went away, the cam_periph_release() call in
saclose() would cause the periph to get destroyed because that
was the last reference to it. Because destroy_dev() was
called from the sa(4) driver's cleanup routine (sacleanup()),
and would block waiting for the close to happen, a deadlock
would result.

So instead of calling destroy_dev() from the cleanup routine,
call destroy_dev_sched_cb() from saoninvalidate() and wait for
the callback.

Acquire a reference for devfs in saregister(), and release it
in the new sadevgonecb() routine when all devfs devices for
the particular sa(4) driver instance are gone.

Add a new function, sasetupdev(), to centralize setting
per-instance devfs device parameters instead of repeating the
code in saregister().

Add an open count to the softc, so we know how many
peripheral driver references are a result of open
sessions.

Add the D_TRACKCLOSE flag to the cdevsw flags so
that we get a 1:1 mapping of open to close calls
instead of a N:1 mapping.

This should be a no-op for everything except the
control device, since we don't allow more than one
open on non-control devices.

However, since we do allow multiple opens on the
control device, the combination of the open count
and the D_TRACKCLOSE flag should result in an
accurate peripheral driver reference count, and an
accurate open count.

The accurate open count allows us to release all
peripheral driver references that are the result
of open contexts once we get the callback from devfs.

sys/sys/mtio.h:
Add a number of new mt(4) ioctls and the requisite data
structures. None of the existing interfaces been removed
or changed.

This includes definitions for the following new ioctls:

MTIOCRBLIM /* get block limits */
MTIOCEXTLOCATE /* seek to position */
MTIOCEXTGET /* get tape status */
MTIOCPARAMGET /* get tape params */
MTIOCPARAMSET /* set tape params */
MTIOCSETLIST /* set N params */

usr.bin/mt/Makefile:
mt(1) now depends on libmt, libsbuf and libbsdxml.

usr.bin/mt/mt.1:
Document new mt(1) features and subcommands.

usr.bin/mt/mt.c:
Implement support for mt(1) subcommands that need to
use getopt(3) for their arguments.

Implement a new 'mt status' command to replace the old
'mt status' command. The old status command has been
renamed 'ostatus'.

The new status function uses the MTIOCEXTGET ioctl, and
therefore parses the XML data to determine drive status.
The -x argument to 'mt status' allows the user to dump out
the raw XML reported by the kernel.

The new status display is mostly the same as the old status
display, except that it doesn't print the redundant density
mode information, and it does print the current partition
number and position flags.

Add a new command, 'mt locate', that will supersede the
old 'mt setspos' and 'mt sethpos' commands. 'mt locate'
implements all of the functionality of the MTIOCEXTLOCATE
ioctl, and allows the user to change the logical position
of the tape drive in a number of ways. (Partition,
block number, file number, set mark number, end of data.)
The immediate bit and the explicit address bits are
implemented, but not documented in the man page.

Add a new 'mt weofi' command to use the new MTWEOFI ioctl.
This allows the user to ask the drive to write a filemark
without waiting around for the operation to complete.

Add a new 'mt getdensity' command that gets the XML-based
tape drive density report from the sa(4) driver and displays
it. This uses the SCSI REPORT DENSITY SUPPORT command
to get comprehensive information from the tape drive about
what formats it is able to read and write.

Add a new 'mt protect' command that allows getting and setting
tape drive protection information. The protection information
is a CRC tacked on to the end of every read/write from and to
the tape drive.

Sponsored by: Spectra Logic
MFC after: 1 month

------------------------------------------------------------------------
------------------------------------------------------------------------
r279229 | ken | 2015-02-23 22:43:16 -0700 (Mon, 23 Feb 2015) | 5 lines

Fix printf format warnings on sparc64 and mips.

Sponsored by: Spectra Logic
MFC after: 1 month

------------------------------------------------------------------------
------------------------------------------------------------------------
r279261 | ken | 2015-02-24 21:30:23 -0700 (Tue, 24 Feb 2015) | 23 lines

Fix several problems found by Coverity.

lib/libmt/mtlib.c:
In mt_start_element(), make sure we don't overflow the
cur_sb array. CID 1271325

usr.bin/mt/mt.c:
In main(), bzero the mt_com structure so that we aren't
using any uninitialized stack variables. CID 1271319

In mt_param(), only allow one -s and one -p argument. This
will prevent a memory leak caused by overwriting the
param_name and/or param_value variables. CID 1271320 and
CID 1271322

To make things simpler in mt_param(), make sure there
there is only one exit path for the function. Make sure
the arguments are explicitly freed.

Sponsored by: Spectra Logic
Pointed out by: emaste
MFC after: 1 month

------------------------------------------------------------------------
------------------------------------------------------------------------
r279534 | ken | 2015-03-02 11:09:49 -0700 (Mon, 02 Mar 2015) | 18 lines

Change the sa(4) driver to check for long position support on
SCSI-2 devices.

Some older tape devices claim to be SCSI-2, but actually do support
long position information. (Long position information includes
the current file mark.) For example, the COMPAQ SuperDLT1.

So we now only disable the check on SCSI-1 and older devices.

sys/cam/scsi/scsi_sa.c:
In saregister(), only disable fetching long position
information on SCSI-1 and older drives. Update the
comment to explain why.

Confirmed by: dvl
Sponsored by: Spectra Logic
MFC after: 3 weeks

------------------------------------------------------------------------
------------------------------------------------------------------------
r279570 | ken | 2015-03-03 15:49:07 -0700 (Tue, 03 Mar 2015) | 21 lines

Add density code for DAT-72, and notes on DAT-160.

As it turns out, the density code for DAT-160 (0x48) is the same
as for SDLT220. Since the SDLT values are already in the table,
we will leave them in place.

Thanks to Harald Schmalzbauer for confirming the DAT-72 density code.

lib/libmt/mtlib.c:
Add DAT-72 density code, and commented out DAT-160 density
code. Explain why DAT-160 is commented out. Add notes
explaining where the bpi values for these formats came from.

usr.bin/mt/mt.1:
Add DAT-72 density code, and add a note explaining that
the SDLTTapeI(110) density code (0x48) is the same as
DAT-160.

Sponsored by: Spectra Logic
MFC after: 3 weeks

------------------------------------------------------------------------
------------------------------------------------------------------------
r280230 | ken | 2015-03-18 14:52:34 -0600 (Wed, 18 Mar 2015) | 25 lines

Fix a couple of problems in the sa(4) media type reports.

The only drives I have discovered so far that support medium type
reports are newer HP LTO (LTO-5 and LTO-6) drives. IBM drives
only support the density reports.

sys/cam/scsi/scsi_sa.h:
The number of possible density codes in the medium type
report is 9, not 8. This caused problems parsing all of
the medium type report after this point in the structure.

usr.bin/mt/mt.c:
Run the density codes returned in the medium type report
through denstostring(), just like the primary and secondary
density codes in the density report. This will print the
density code in hex, and give a text description if it
is available.

Thanks to Rudolf Cejka for doing extensive testing with HP LTO drives
and Bacula and discovering these problems.

Tested by: Rudolf Cejka <cejkar at fit.vutbr.cz>
Sponsored by: Spectra Logic
MFC after: 4 days

------------------------------------------------------------------------
------------------------------------------------------------------------
r280231 | ken | 2015-03-18 14:54:54 -0600 (Wed, 18 Mar 2015) | 16 lines

Improve the mt(1) rblim display.

The granularity reported by READ BLOCK LIMITS is an exponent, not a
byte value. So a granularity of 0 means 2^0, or 1 byte. A
granularity of 1 means 2^1, or 2 bytes.

Print out the individual block limits on separate lines to improve
readability and avoid exceeding 80 columns.

usr.bin/mt/mt.c:
Fix and improve the 'mt rblim' output. Add a MT_PLURAL()
macro so we can print "byte" or "bytes" as appropriate.

Sponsored by: Spectra Logic
MFC after: 4 days

------------------------------------------------------------------------

Sponsored by: Spectra Logic

MFC r278193:

Add MK_FILE to control whether or not to build file(1), libmagic(3), etc

Sponsored by: EMC / Isilon Storage Division

MFC r278182:

r278182:

Conditionalize building radius support into libpam, ppp, etc via
MK_RADIUS_SUPPORT

Sponsored by: EMC / Isilon Storage Division

MFC r277727:

r277727:

Add MK_BHYVE knob for building and installing bhyve(4), et al

Sponsored by: EMC / Isilon Storage Division

MFC r274116:

Add new libraries/utilities for data throughput visualization.
dpv(3): dialog progress view library
dpv(1): stream data from stdin or multiple paths with dialog progress view
figpar(3): configuration file parsing library

MFC r274120, r274121, r274123, r274124, r274144, r274146, r274159, r274192,
r274203, r274209, r274226, r274270, and r274851: Fixes following r274116

Reviews: D714
Relnotes: New libdpv/libfigpar and dpv(1) utility
Reviewed by: jelischer, shurd
Discussed at: MeetBSD California 2014 Vendor/Dev Summit
Discussed on: -current
Thanks to: ngie, ian, jelischer, shurd, bapt

MFC r266473,267331,267511:

Use an intermediate target to associate with _SUBDIR which is marked .MAKE
this allows make -n to do tree walks as expected without
doing anything else (as intended).
Use prefix _sub. to help avoid conflict with any real target.

Put the test suite in its own tests.txz distribution file.
Force all the contents of /usr/tests to go into a separate distribution
file so that users of binary releases can easily choose to not install

Create a mechanism for providing fine-grained build order dependencies
during SUBDIR_PARALLEL builds. This augments the coarse .WAIT mechanism,
which is still useful if you've got a situation such as "almost everything
depends on A and B".

MFC r263778:

Add a SUBDIR_PARALLEL option to bsd.subdir.mk, to allow make to process
all the SUBDIR entries in parallel, instead of serially. Apply this
option to a selected number of Makefiles, which can greatly speed up the
build on multi-core machines, when using make -j.

This can be extended to more Makefiles later on, whenever they are
verified to work correctly with parallel building.

I tested this on a 24-core machine, with make -j48 buildworld (N = 6):

before stddev after stddev
======= ====== ======= ======
real time 1741.1 16.5 959.8 2.7
user time 12468.7 16.4 14393.0 16.8
sys time 1825.0 54.8 2110.6 22.8

(user+sys)/real 8.2 17.1

E.g. the build was approximately 45% faster in real time. On machines
with less cores, or with lower -j settings, the speedup will not be as
impressive. But at least you can now almost max out a machine with
buildworld!

Submitted by: jilles

MFC r263833:

Enable parallel building for gnu/usr.bin and usr.bin/clang too.

MFC: r262398,r262399,r262410,r262975

Import libucl into head

UCL is heavily infused by nginx configuration as the example of a convenient
configuration system. However, UCL is fully compatible with JSON format and is
able to parse json files.

UCL is used by pkg(8) for its configuration file as well for the manifest format
in packages, it will be used in base for the pkg boostrap (signature checking
and configuration file parsing.)

libucl has been developped and is maintained by vsevolod@

Set up the /usr/tests hierarchy.

This is a MFC of the following into stable/10:
- r257097 Set up the /usr/tests hierarchy.
- r257098 Add missing WITHOUTTESTS file.
- r257100 Add a tests(7) manual page.
- r257105 Disable WITHTESTS= for now.
- r257848 Fix buildworld when WITHTESTS is enabled.
- r257850 Subsume the functionality of MKATF into MKTESTS.
- r257851 Handle the removal of the test suite when WITHOUTTESTS=yes.
- r257852 Install category Kyuafiles from their category directories.
- r258232 Install BSD.tests.mtree when MKTESTS is yes.

Note that building with WITH_TESTS is still broken at this point (and
hence why WITHOUT_TESTS is the set as the default). Subsequent pullups
will fix the remaining issues.

MFC r258283 - move iconv* symbols out of libc.so.7 namespace with
compatibility symbols to aid transition for existing 10.x installs.

Approved by: re (kib)

MFC r257583, r258012, r258013:

r257583 (peter):
Remove the WITH_LIBICONV_COMPAT hack that seems to do more harm
than good. This caused libc to spoof the ports libiconv namespace
and provide a colliding libiconv.so.3 to fool rtld. This should
have been removed some time ago.

r258012:
Remove WITH_LIBICONV_COMPAT file to chase after r257583.

r258013:
Regenerate src.conf.5 after removal of WITH_LIBICONV_COMPAT.

Approved by: re (kib)
Sponsored by: The FreeBSD Foundation

Sponsored by: The FreeBSD Foundation

MFC r283502:

Remove SUBDIR_DEPEND for non-existent libreadline directory

libreadline lives under gnu/lib

MFC sa(4) and mt(1) improvements.

This includes these changes: 279219, 279229, 279261, 279534, 279570,
280230, 280231.

In addition, bump __FreeBSD_version for the addition of the new
mtio(4) / sa(4) ioctls.

Thanks to Dan Langille, Harald Schmalzbauer and Rudolf Cejka for spending
a significant amount of time and effort testing these changes.

------------------------------------------------------------------------
r279219 | ken | 2015-02-23 14:59:30 -0700 (Mon, 23 Feb 2015) | 282 lines

Significant upgrades to sa(4) and mt(1).

The primary focus of these changes is to modernize FreeBSD's
tape infrastructure so that we can take advantage of some of the
features of modern tape drives and allow support for LTFS.

Significant changes and new features include:

o sa(4) driver status and parameter information is now exported via an
XML structure. This will allow for changes and improvements later
on that will not break userland applications. The old MTIOCGET
status ioctl remains, so applications using the existing interface
will not break.

o 'mt status' now reports drive-reported tape position information
as well as the previously available calculated tape position
information. These numbers will be different at times, because
the drive-reported block numbers are relative to BOP (Beginning
of Partition), but the block numbers calculated previously via
sa(4) (and still provided) are relative to the last filemark.
Both numbers are now provided. 'mt status' now also shows the
drive INQUIRY information, serial number and any position flags
(BOP, EOT, etc.) provided with the tape position information.
'mt status -v' adds information on the maximum possible I/O size,
and the underlying values used to calculate it.

o The extra sa(4) /dev entries (/dev/saN.[0-3]) have been removed.

The extra devices were originally added as place holders for
density-specific device nodes. Some OSes (NetBSD, NetApp's OnTap
and Solaris) have had device nodes that, when you write to them,
will automatically select a given density for particular tape drives.

This is a convenient way of switching densities, but it was never
implemented in FreeBSD. Only the device nodes were there, and that
sometimes confused users.

For modern tape devices, the density is generally not selectable
(e.g. with LTO) or defaults to the highest availble density when
the tape is rewritten from BOT (e.g. TS11X0). So, for most users,
density selection won't be necessary. If they do need to select
the density, it is easy enough to use 'mt density' to change it.

o Protection information is now supported. This is either a
Reed-Solomon CRC or CRC32 that is included at the end of each block
read and written. On write, the tape drive verifies the CRC, and
on read, the tape drive provides a CRC for the userland application
to verify.

o New, extensible tape driver parameter get/set interface.

o Density reporting information. For drives that support it,
'mt getdensity' will show detailed information on what formats the
tape drive supports, and what formats the tape drive supports.

o Some mt(1) functionality moved into a new mt(3) library so that
external applications can reuse the code.

o The new mt(3) library includes helper routines to aid in parsing
the XML output of the sa(4) driver, and build a tree of driver
metadata.

o Support for the MTLOAD (load a tape in the drive) and MTWEOFI
(write filemark immediate) ioctls needed by IBM's LTFS
implementation.

o Improve device departure behavior for the sa(4) driver. The previous
implementation led to hangs when the device was open.

o This has been tested on the following types of drives:
IBM TS1150
IBM TS1140
IBM LTO-6
IBM LTO-5
HP LTO-2
Seagate DDS-4
Quantum DLT-4000
Exabyte 8505
Sony DDS-2

contrib/groff/tmac/doc-syms,
share/mk/bsd.libnames.mk,
lib/Makefile,
Add libmt.

lib/libmt/Makefile,
lib/libmt/mt.3,
lib/libmt/mtlib.c,
lib/libmt/mtlib.h,
New mt(3) library that contains functions moved from mt(1) and
new functions needed to interact with the updated sa(4) driver.

This includes XML parser helper functions that application writers
can use when writing code to query tape parameters.

rescue/rescue/Makefile:
Add -lmt to CRUNCH_LIBS.

src/share/man/man4/mtio.4
Clarify this man page a bit, and since it contains what is
essentially the mtio.h header file, add new ioctls and structure
definitions from mtio.h.

src/share/man/man4/sa.4
Update BUGS and maintainer section.

sys/cam/scsi/scsi_all.c,
sys/cam/scsi/scsi_all.h:
Add SCSI SECURITY PROTOCOL IN/OUT CDB definitions and CDB building
functions.

sys/cam/scsi/scsi_sa.c
sys/cam/scsi/scsi_sa.h
Many tape driver changes, largely outlined above.

Increase the sa(4) driver read/write timeout from 4 to 32
minutes. This is based on the recommended values for IBM LTO
5/6 drives. This may also avoid timeouts for other tape
hardware that can take a long time to do retries and error
recovery. Longer term, a better way to handle this is to ask
the drive for recommended timeout values using the REPORT
SUPPORTED OPCODES command. Modern IBM and Oracle tape drives
at least support that command, and it would allow for more
accurate timeout values.

Add XML status generation. This is done with a series of
macros to eliminate as much duplicate code as possible. The
new XML-based status values are reported through the new
MTIOCEXTGET ioctl.

Add XML driver parameter reporting, using the new MTIOCPARAMGET
ioctl.

Add a new driver parameter setting interface, using the new
MTIOCPARAMSET and MTIOCSETLIST ioctls.

Add a new MTIOCRBLIM ioctl to get block limits information.

Add CCB/CDB building routines scsi_locate_16, scsi_locate_10,
and scsi_read_position_10().

scsi_locate_10 implements the LOCATE command, as does the
existing scsi_set_position() command. It just supports
additional arguments and features. If/when we figure out a
good way to provide backward compatibility for older
applications using the old function API, we can just revamp
scsi_set_position(). The same goes for
scsi_read_position_10() and the existing scsi_read_position()
function.

Revamp sasetpos() to take the new mtlocate structure as an
argument. It now will use either scsi_locate_10() or
scsi_locate_16(), depending upon the arguments the user
supplies. As before, once we change position we don't have a
clear idea of what the current logical position of the tape
drive is.

For tape drives that support long form position data, we
read the current position and store that for later reporting
after changing the position. This should help applications
like Bacula speed tape access under FreeBSD once they are
modified to support the new ioctls.

Add a new quirk, SA_QUIRK_NO_LONG_POS, that is set for all
drives that report SCSI-2 or older, as well as drives that
report an Illegal Request type error for READ POSITION with
the long format. So we should automatically detect drives
that don't support the long form and stop asking for it after
an initial try.

Add a partition number to the sa(4) softc.

Improve device departure handling. The previous implementation
led to hangs when the device was open.

If an application had the sa(4) driver open, and attempted to
close it after it went away, the cam_periph_release() call in
saclose() would cause the periph to get destroyed because that
was the last reference to it. Because destroy_dev() was
called from the sa(4) driver's cleanup routine (sacleanup()),
and would block waiting for the close to happen, a deadlock
would result.

So instead of calling destroy_dev() from the cleanup routine,
call destroy_dev_sched_cb() from saoninvalidate() and wait for
the callback.

Acquire a reference for devfs in saregister(), and release it
in the new sadevgonecb() routine when all devfs devices for
the particular sa(4) driver instance are gone.

Add a new function, sasetupdev(), to centralize setting
per-instance devfs device parameters instead of repeating the
code in saregister().

Add an open count to the softc, so we know how many
peripheral driver references are a result of open
sessions.

Add the D_TRACKCLOSE flag to the cdevsw flags so
that we get a 1:1 mapping of open to close calls
instead of a N:1 mapping.

This should be a no-op for everything except the
control device, since we don't allow more than one
open on non-control devices.

However, since we do allow multiple opens on the
control device, the combination of the open count
and the D_TRACKCLOSE flag should result in an
accurate peripheral driver reference count, and an
accurate open count.

The accurate open count allows us to release all
peripheral driver references that are the result
of open contexts once we get the callback from devfs.

sys/sys/mtio.h:
Add a number of new mt(4) ioctls and the requisite data
structures. None of the existing interfaces been removed
or changed.

This includes definitions for the following new ioctls:

MTIOCRBLIM /* get block limits */
MTIOCEXTLOCATE /* seek to position */
MTIOCEXTGET /* get tape status */
MTIOCPARAMGET /* get tape params */
MTIOCPARAMSET /* set tape params */
MTIOCSETLIST /* set N params */

usr.bin/mt/Makefile:
mt(1) now depends on libmt, libsbuf and libbsdxml.

usr.bin/mt/mt.1:
Document new mt(1) features and subcommands.

usr.bin/mt/mt.c:
Implement support for mt(1) subcommands that need to
use getopt(3) for their arguments.

Implement a new 'mt status' command to replace the old
'mt status' command. The old status command has been
renamed 'ostatus'.

The new status function uses the MTIOCEXTGET ioctl, and
therefore parses the XML data to determine drive status.
The -x argument to 'mt status' allows the user to dump out
the raw XML reported by the kernel.

The new status display is mostly the same as the old status
display, except that it doesn't print the redundant density
mode information, and it does print the current partition
number and position flags.

Add a new command, 'mt locate', that will supersede the
old 'mt setspos' and 'mt sethpos' commands. 'mt locate'
implements all of the functionality of the MTIOCEXTLOCATE
ioctl, and allows the user to change the logical position
of the tape drive in a number of ways. (Partition,
block number, file number, set mark number, end of data.)
The immediate bit and the explicit address bits are
implemented, but not documented in the man page.

Add a new 'mt weofi' command to use the new MTWEOFI ioctl.
This allows the user to ask the drive to write a filemark
without waiting around for the operation to complete.

Add a new 'mt getdensity' command that gets the XML-based
tape drive density report from the sa(4) driver and displays
it. This uses the SCSI REPORT DENSITY SUPPORT command
to get comprehensive information from the tape drive about
what formats it is able to read and write.

Add a new 'mt protect' command that allows getting and setting
tape drive protection information. The protection information
is a CRC tacked on to the end of every read/write from and to
the tape drive.

Sponsored by: Spectra Logic
MFC after: 1 month

------------------------------------------------------------------------
------------------------------------------------------------------------
r279229 | ken | 2015-02-23 22:43:16 -0700 (Mon, 23 Feb 2015) | 5 lines

Fix printf format warnings on sparc64 and mips.

Sponsored by: Spectra Logic
MFC after: 1 month

------------------------------------------------------------------------
------------------------------------------------------------------------
r279261 | ken | 2015-02-24 21:30:23 -0700 (Tue, 24 Feb 2015) | 23 lines

Fix several problems found by Coverity.

lib/libmt/mtlib.c:
In mt_start_element(), make sure we don't overflow the
cur_sb array. CID 1271325

usr.bin/mt/mt.c:
In main(), bzero the mt_com structure so that we aren't
using any uninitialized stack variables. CID 1271319

In mt_param(), only allow one -s and one -p argument. This
will prevent a memory leak caused by overwriting the
param_name and/or param_value variables. CID 1271320 and
CID 1271322

To make things simpler in mt_param(), make sure there
there is only one exit path for the function. Make sure
the arguments are explicitly freed.

Sponsored by: Spectra Logic
Pointed out by: emaste
MFC after: 1 month

------------------------------------------------------------------------
------------------------------------------------------------------------
r279534 | ken | 2015-03-02 11:09:49 -0700 (Mon, 02 Mar 2015) | 18 lines

Change the sa(4) driver to check for long position support on
SCSI-2 devices.

Some older tape devices claim to be SCSI-2, but actually do support
long position information. (Long position information includes
the current file mark.) For example, the COMPAQ SuperDLT1.

So we now only disable the check on SCSI-1 and older devices.

sys/cam/scsi/scsi_sa.c:
In saregister(), only disable fetching long position
information on SCSI-1 and older drives. Update the
comment to explain why.

Confirmed by: dvl
Sponsored by: Spectra Logic
MFC after: 3 weeks

------------------------------------------------------------------------
------------------------------------------------------------------------
r279570 | ken | 2015-03-03 15:49:07 -0700 (Tue, 03 Mar 2015) | 21 lines

Add density code for DAT-72, and notes on DAT-160.

As it turns out, the density code for DAT-160 (0x48) is the same
as for SDLT220. Since the SDLT values are already in the table,
we will leave them in place.

Thanks to Harald Schmalzbauer for confirming the DAT-72 density code.

lib/libmt/mtlib.c:
Add DAT-72 density code, and commented out DAT-160 density
code. Explain why DAT-160 is commented out. Add notes
explaining where the bpi values for these formats came from.

usr.bin/mt/mt.1:
Add DAT-72 density code, and add a note explaining that
the SDLTTapeI(110) density code (0x48) is the same as
DAT-160.

Sponsored by: Spectra Logic
MFC after: 3 weeks

------------------------------------------------------------------------
------------------------------------------------------------------------
r280230 | ken | 2015-03-18 14:52:34 -0600 (Wed, 18 Mar 2015) | 25 lines

Fix a couple of problems in the sa(4) media type reports.

The only drives I have discovered so far that support medium type
reports are newer HP LTO (LTO-5 and LTO-6) drives. IBM drives
only support the density reports.

sys/cam/scsi/scsi_sa.h:
The number of possible density codes in the medium type
report is 9, not 8. This caused problems parsing all of
the medium type report after this point in the structure.

usr.bin/mt/mt.c:
Run the density codes returned in the medium type report
through denstostring(), just like the primary and secondary
density codes in the density report. This will print the
density code in hex, and give a text description if it
is available.

Thanks to Rudolf Cejka for doing extensive testing with HP LTO drives
and Bacula and discovering these problems.

Tested by: Rudolf Cejka <cejkar at fit.vutbr.cz>
Sponsored by: Spectra Logic
MFC after: 4 days

------------------------------------------------------------------------
------------------------------------------------------------------------
r280231 | ken | 2015-03-18 14:54:54 -0600 (Wed, 18 Mar 2015) | 16 lines

Improve the mt(1) rblim display.

The granularity reported by READ BLOCK LIMITS is an exponent, not a
byte value. So a granularity of 0 means 2^0, or 1 byte. A
granularity of 1 means 2^1, or 2 bytes.

Print out the individual block limits on separate lines to improve
readability and avoid exceeding 80 columns.

usr.bin/mt/mt.c:
Fix and improve the 'mt rblim' output. Add a MT_PLURAL()
macro so we can print "byte" or "bytes" as appropriate.

Sponsored by: Spectra Logic
MFC after: 4 days

------------------------------------------------------------------------

Sponsored by: Spectra Logic

MFC r278193:

Add MK_FILE to control whether or not to build file(1), libmagic(3), etc

Sponsored by: EMC / Isilon Storage Division

MFC r278182:

r278182:

Conditionalize building radius support into libpam, ppp, etc via
MK_RADIUS_SUPPORT

Sponsored by: EMC / Isilon Storage Division

MFC r277727:

r277727:

Add MK_BHYVE knob for building and installing bhyve(4), et al

Sponsored by: EMC / Isilon Storage Division

MFC r274116:

Add new libraries/utilities for data throughput visualization.
dpv(3): dialog progress view library
dpv(1): stream data from stdin or multiple paths with dialog progress view
figpar(3): configuration file parsing library

MFC r274120, r274121, r274123, r274124, r274144, r274146, r274159, r274192,
r274203, r274209, r274226, r274270, and r274851: Fixes following r274116

Reviews: D714
Relnotes: New libdpv/libfigpar and dpv(1) utility
Reviewed by: jelischer, shurd
Discussed at: MeetBSD California 2014 Vendor/Dev Summit
Discussed on: -current
Thanks to: ngie, ian, jelischer, shurd, bapt

MFC r266473,267331,267511:

Use an intermediate target to associate with _SUBDIR which is marked .MAKE
this allows make -n to do tree walks as expected without
doing anything else (as intended).
Use prefix _sub. to help avoid conflict with any real target.

Put the test suite in its own tests.txz distribution file.
Force all the contents of /usr/tests to go into a separate distribution
file so that users of binary releases can easily choose to not install

Create a mechanism for providing fine-grained build order dependencies
during SUBDIR_PARALLEL builds. This augments the coarse .WAIT mechanism,
which is still useful if you've got a situation such as "almost everything
depends on A and B".

MFC r263778:

Add a SUBDIR_PARALLEL option to bsd.subdir.mk, to allow make to process
all the SUBDIR entries in parallel, instead of serially. Apply this
option to a selected number of Makefiles, which can greatly speed up the
build on multi-core machines, when using make -j.

This can be extended to more Makefiles later on, whenever they are
verified to work correctly with parallel building.

I tested this on a 24-core machine, with make -j48 buildworld (N = 6):

before stddev after stddev
======= ====== ======= ======
real time 1741.1 16.5 959.8 2.7
user time 12468.7 16.4 14393.0 16.8
sys time 1825.0 54.8 2110.6 22.8

(user+sys)/real 8.2 17.1

E.g. the build was approximately 45% faster in real time. On machines
with less cores, or with lower -j settings, the speedup will not be as
impressive. But at least you can now almost max out a machine with
buildworld!

Submitted by: jilles

MFC r263833:

Enable parallel building for gnu/usr.bin and usr.bin/clang too.

MFC: r262398,r262399,r262410,r262975

Import libucl into head

UCL is heavily infused by nginx configuration as the example of a convenient
configuration system. However, UCL is fully compatible with JSON format and is
able to parse json files.

UCL is used by pkg(8) for its configuration file as well for the manifest format
in packages, it will be used in base for the pkg boostrap (signature checking
and configuration file parsing.)

libucl has been developped and is maintained by vsevolod@

Set up the /usr/tests hierarchy.

This is a MFC of the following into stable/10:
- r257097 Set up the /usr/tests hierarchy.
- r257098 Add missing WITHOUTTESTS file.
- r257100 Add a tests(7) manual page.
- r257105 Disable WITHTESTS= for now.
- r257848 Fix buildworld when WITHTESTS is enabled.
- r257850 Subsume the functionality of MKATF into MKTESTS.
- r257851 Handle the removal of the test suite when WITHOUTTESTS=yes.
- r257852 Install category Kyuafiles from their category directories.
- r258232 Install BSD.tests.mtree when MKTESTS is yes.

Note that building with WITH_TESTS is still broken at this point (and
hence why WITHOUT_TESTS is the set as the default). Subsequent pullups
will fix the remaining issues.

MFC r258283 - move iconv* symbols out of libc.so.7 namespace with
compatibility symbols to aid transition for existing 10.x installs.

Approved by: re (kib)

MFC r257583, r258012, r258013:

r257583 (peter):
Remove the WITH_LIBICONV_COMPAT hack that seems to do more harm
than good. This caused libc to spoof the ports libiconv namespace
and provide a colliding libiconv.so.3 to fool rtld. This should
have been removed some time ago.

r258012:
Remove WITH_LIBICONV_COMPAT file to chase after r257583.

r258013:
Regenerate src.conf.5 after removal of WITH_LIBICONV_COMPAT.

Approved by: re (kib)
Sponsored by: The FreeBSD Foundation

Sponsored by: The FreeBSD Foundation