1#
2# Touchscreen driver configuration
3#
4menuconfig INPUT_TOUCHSCREEN
5	bool "Touchscreens"
6	help
7	  Say Y here, and a list of supported touchscreens will be displayed.
8	  This option doesn't affect the kernel.
9
10	  If unsure, say Y.
11
12if INPUT_TOUCHSCREEN
13
14config TOUCHSCREEN_ADS7846
15	tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
16	depends on SPI_MASTER
17	depends on HWMON = n || HWMON
18	help
19	  Say Y here if you have a touchscreen interface using the
20	  ADS7846/TSC2046 or ADS7843 controller, and your board-specific
21	  setup code includes that in its table of SPI devices.
22
23	  If HWMON is selected, and the driver is told the reference voltage
24	  on your board, you will also get hwmon interfaces for the voltage
25	  (and on ads7846/tsc2046, temperature) sensors of this chip.
26
27	  If unsure, say N (but it's safe to say "Y").
28
29	  To compile this driver as a module, choose M here: the
30	  module will be called ads7846.
31
32config TOUCHSCREEN_BITSY
33	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
34	depends on SA1100_BITSY
35	select SERIO
36	help
37	  Say Y here if you have the h3600 (Bitsy) touchscreen.
38
39	  If unsure, say N.
40
41	  To compile this driver as a module, choose M here: the
42	  module will be called h3600_ts_input.
43
44config TOUCHSCREEN_CORGI
45	tristate "SharpSL (Corgi and Spitz series) touchscreen driver"
46	depends on PXA_SHARPSL
47	default y
48	help
49	  Say Y here to enable the driver for the touchscreen on the
50	  Sharp SL-C7xx and SL-Cxx00 series of PDAs.
51
52	  If unsure, say N.
53
54	  To compile this driver as a module, choose M here: the
55	  module will be called corgi_ts.
56
57config TOUCHSCREEN_GUNZE
58	tristate "Gunze AHL-51S touchscreen"
59	select SERIO
60	help
61	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
62	  your system.
63
64	  If unsure, say N.
65
66	  To compile this driver as a module, choose M here: the
67	  module will be called gunze.
68
69config TOUCHSCREEN_ELO
70	tristate "Elo serial touchscreens"
71	select SERIO
72	help
73	  Say Y here if you have an Elo serial touchscreen connected to
74	  your system.
75
76	  If unsure, say N.
77
78	  To compile this driver as a module, choose M here: the
79	  module will be called elo.
80
81config TOUCHSCREEN_MTOUCH
82	tristate "MicroTouch serial touchscreens"
83	select SERIO
84	help
85	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
86	  your system.
87
88	  If unsure, say N.
89
90	  To compile this driver as a module, choose M here: the
91	  module will be called mtouch.
92
93config TOUCHSCREEN_MK712
94	tristate "ICS MicroClock MK712 touchscreen"
95	help
96	  Say Y here if you have the ICS MicroClock MK712 touchscreen
97	  controller chip in your system.
98
99	  If unsure, say N.
100
101	  To compile this driver as a module, choose M here: the
102	  module will be called mk712.
103
104config TOUCHSCREEN_HP600
105	tristate "HP Jornada 680/690 touchscreen"
106	depends on SH_HP6XX && SH_ADC
107	help
108	  Say Y here if you have a HP Jornada 680 or 690 and want to
109          support the built-in touchscreen.
110
111	  If unsure, say N.
112
113	  To compile this driver as a module, choose M here: the
114	  module will be called hp680_ts_input.
115
116config TOUCHSCREEN_PENMOUNT
117	tristate "Penmount serial touchscreen"
118	select SERIO
119	help
120	  Say Y here if you have a Penmount serial touchscreen connected to
121	  your system.
122
123	  If unsure, say N.
124
125	  To compile this driver as a module, choose M here: the
126	  module will be called penmount.
127
128config TOUCHSCREEN_TOUCHRIGHT
129	tristate "Touchright serial touchscreen"
130	select SERIO
131	help
132	  Say Y here if you have a Touchright serial touchscreen connected to
133	  your system.
134
135	  If unsure, say N.
136
137	  To compile this driver as a module, choose M here: the
138	  module will be called touchright.
139
140config TOUCHSCREEN_TOUCHWIN
141	tristate "Touchwin serial touchscreen"
142	select SERIO
143	help
144	  Say Y here if you have a Touchwin serial touchscreen connected to
145	  your system.
146
147	  If unsure, say N.
148
149	  To compile this driver as a module, choose M here: the
150	  module will be called touchwin.
151
152config TOUCHSCREEN_UCB1400
153	tristate "Philips UCB1400 touchscreen"
154	select AC97_BUS
155	help
156	  This enables support for the Philips UCB1400 touchscreen interface.
157	  The UCB1400 is an AC97 audio codec.  The touchscreen interface
158	  will be initialized only after the ALSA subsystem has been
159	  brought up and the UCB1400 detected.  You therefore have to
160	  configure ALSA support as well (either built-in or modular,
161	  independently of whether this driver is itself built-in or
162	  modular) for this driver to work.
163
164	  To compile this driver as a module, choose M here: the
165	  module will be called ucb1400_ts.
166
167config TOUCHSCREEN_USB_COMPOSITE
168	tristate "USB Touchscreen Driver"
169	depends on USB_ARCH_HAS_HCD
170	select USB
171	help
172	  USB Touchscreen driver for:
173	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
174	  - PanJit TouchSet USB
175	  - 3M MicroTouch USB (EX II series)
176	  - ITM
177	  - some other eTurboTouch
178	  - Gunze AHL61
179	  - DMC TSC-10/25
180
181	  Have a look at <http://linux.chapter7.ch/touchkit/> for
182	  a usage description and the required user-space stuff.
183
184	  To compile this driver as a module, choose M here: the
185	  module will be called usbtouchscreen.
186
187config TOUCHSCREEN_USB_EGALAX
188	default y
189	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
190	depends on TOUCHSCREEN_USB_COMPOSITE
191
192config TOUCHSCREEN_USB_PANJIT
193	default y
194	bool "PanJit device support" if EMBEDDED
195	depends on TOUCHSCREEN_USB_COMPOSITE
196
197config TOUCHSCREEN_USB_3M
198	default y
199	bool "3M/Microtouch EX II series device support" if EMBEDDED
200	depends on TOUCHSCREEN_USB_COMPOSITE
201
202config TOUCHSCREEN_USB_ITM
203	default y
204	bool "ITM device support" if EMBEDDED
205	depends on TOUCHSCREEN_USB_COMPOSITE
206
207config TOUCHSCREEN_USB_ETURBO
208	default y
209	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
210	depends on TOUCHSCREEN_USB_COMPOSITE
211
212config TOUCHSCREEN_USB_GUNZE
213	default y
214	bool "Gunze AHL61 device support" if EMBEDDED
215	depends on TOUCHSCREEN_USB_COMPOSITE
216
217config TOUCHSCREEN_USB_DMC_TSC10
218	default y
219	bool "DMC TSC-10/25 device support" if EMBEDDED
220	depends on TOUCHSCREEN_USB_COMPOSITE
221
222endif
223