1/* 2 * Copyright 2005-2015, Axel D��rfler, axeld@pinc-software.de. All rights reserved. 3 * Copyright 2002-04, Thomas Kurschel. All rights reserved. 4 * 5 * Distributed under the terms of the MIT License. 6 */ 7#ifndef _ATA_PCI_H 8#define _ATA_PCI_H 9 10 11/*! ATA adapter library 12 13 Module to simplify writing an ATA adapter driver. 14 15 The interface is not very abstract, i.e. the actual driver is 16 free to access any controller or channel data of this library. 17*/ 18 19 20#include <bus/ATA.h> 21#include <bus/PCI.h> 22#include <ata_types.h> 23 24 25// one Physical Region Descriptor (PRD) 26// (one region must not cross 64K boundary; 27// the PRD table must not cross a 64K boundary) 28typedef struct prd_entry { 29 uint32 address; // physical address of block (must be even) 30 uint16 count; // size of block, 0 stands for 65536 (must be even) 31 uint8 res6; 32 B_LBITFIELD8_2( 33 res7_0 : 7, 34 EOT : 1 // 1 for last entry 35 ); 36} prd_entry; 37 38// IDE bus master command register 39#define ATA_BM_COMMAND_START_STOP 0x01 40#define ATA_BM_COMMAND_READ_FROM_DEVICE 0x08 41 42// IDE bus master status register 43#define ATA_BM_STATUS_ACTIVE 0x01 44#define ATA_BM_STATUS_ERROR 0x02 45#define ATA_BM_STATUS_INTERRUPT 0x04 46#define ATA_BM_STATUS_MASTER_DMA 0x20 47#define ATA_BM_STATUS_SLAVE_DMA 0x40 48#define ATA_BM_STATUS_SIMPLEX_DMA 0x80 49 50// offset of bus master registers 51enum { 52 ATA_BM_COMMAND_REG = 0, 53 ATA_BM_STATUS_REG = 2, 54 ATA_BM_PRDT_ADDRESS = 4 55 // offset of PRDT register; content must be dword-aligned 56}; 57 58 59// (maximum) size of S/G table 60// there are so many restrictions that we want to keep it inside one page 61// to be sure that we fulfill them all 62#define ATA_ADAPTER_MAX_SG_COUNT (B_PAGE_SIZE / sizeof( prd_entry )) 63 64 65// channel node items 66// io address of command block (uint16) 67#define ATA_ADAPTER_COMMAND_BLOCK_BASE "ata_adapter/command_block_base" 68// io address of control block (uint16) 69#define ATA_ADAPTER_CONTROL_BLOCK_BASE "ata_adapter/control_block_base" 70// interrupt number (uint8) 71// can also be defined in controller node if both channels use same IRQ! 72#define ATA_ADAPTER_INTNUM "ata_adapter/irq" 73// 0 if primary channel, 1 if secondary channel, 2 if tertiary, ... (uint8) 74#define ATA_ADAPTER_CHANNEL_INDEX "ata_adapter/channel_index" 75 76// controller node items 77// io address of bus master registers (uint16) 78#define ATA_ADAPTER_BUS_MASTER_BASE "ata_adapter/bus_master_base" 79 80 81// info about one channel 82typedef struct ata_adapter_channel_info { 83 pci_device_module_info *pci; 84 pci_device *device; 85 86 uint16 command_block_base; // io address command block 87 uint16 control_block_base; // io address control block 88 uint16 bus_master_base; 89 int intnum; // interrupt number 90 91 uint32 lost; // != 0 if device got removed, i.e. if it must not 92 // be accessed anymore 93 94 ata_channel ataChannel; 95 device_node *node; 96 97 int32 (*inthand)( void *arg ); 98 99 area_id prd_area; 100 prd_entry *prdt; 101 uint32 prdt_phys; 102 uint32 dmaing; 103} ata_adapter_channel_info; 104 105 106// info about controller 107typedef struct ata_adapter_controller_info { 108 pci_device_module_info *pci; 109 pci_device *device; 110 111 uint16 bus_master_base; 112 113 uint32 lost; // != 0 if device got removed, i.e. if it must not 114 // be accessed anymore 115 116 device_node *node; 117} ata_adapter_controller_info; 118 119 120// interface of IDE adapter library 121typedef struct { 122 module_info info; 123 124 void (*set_channel)(ata_adapter_channel_info *channel, 125 ata_channel ataChannel); 126 127 // function calls that can be forwarded from actual driver 128 status_t (*write_command_block_regs)(ata_adapter_channel_info *channel, 129 ata_task_file *tf, ata_reg_mask mask); 130 status_t (*read_command_block_regs)(ata_adapter_channel_info *channel, 131 ata_task_file *tf, ata_reg_mask mask); 132 133 uint8 (*get_altstatus) (ata_adapter_channel_info *channel); 134 status_t (*write_device_control) (ata_adapter_channel_info *channel, uint8 val); 135 136 status_t (*write_pio)(ata_adapter_channel_info *channel, uint16 *data, int count, bool force_16bit); 137 status_t (*read_pio)(ata_adapter_channel_info *channel, uint16 *data, int count, bool force_16bit); 138 139 status_t (*prepare_dma)(ata_adapter_channel_info *channel, const physical_entry *sg_list, 140 size_t sg_list_count, bool to_device); 141 status_t (*start_dma)(ata_adapter_channel_info *channel); 142 status_t (*finish_dma)(ata_adapter_channel_info *channel); 143 144 // default functions that should be replaced by a more specific version 145 // (copy them from source code of this library and modify them at will) 146 int32 (*inthand)(void *arg); 147 148 // functions that must be called by init/uninit etc. of channel driver 149 status_t (*init_channel)(device_node *node, 150 ata_adapter_channel_info **cookie, size_t total_data_size, 151 int32 (*inthand)(void *arg)); 152 void (*uninit_channel)(ata_adapter_channel_info *channel); 153 void (*channel_removed)(ata_adapter_channel_info *channel); 154 155 // publish channel node 156 status_t (*publish_channel)(device_node *controller_node, 157 const char *channel_module_name, uint16 command_block_base, 158 uint16 control_block_base, uint8 intnum, bool can_dma, 159 uint8 channel_index, const char *name, 160 const io_resource *resources, device_node **node); 161 // verify channel configuration and publish node on success 162 status_t (*detect_channel)(pci_device_module_info *pci, pci_device *pciDevice, 163 device_node *controller_node, const char *channel_module_name, 164 bool controller_can_dma, uint16 command_block_base, 165 uint16 control_block_base, uint16 bus_master_base, 166 uint8 intnum, uint8 channel_index, const char *name, 167 device_node **node, bool supports_compatibility_mode); 168 169 // functions that must be called by init/uninit etc. of controller driver 170 status_t (*init_controller)(device_node *node, 171 ata_adapter_controller_info **cookie, size_t total_data_size); 172 void (*uninit_controller)(ata_adapter_controller_info *controller); 173 void (*controller_removed)(ata_adapter_controller_info *controller); 174 175 // publish controller node 176 status_t (*publish_controller)(device_node *parent, uint16 bus_master_base, 177 io_resource *resources, const char *controller_driver, 178 const char *controller_driver_type, const char *controller_name, 179 bool can_dma, bool can_cq, uint32 dma_alignment, uint32 dma_boundary, 180 uint32 max_sg_block_size, device_node **node); 181 // verify controller configuration and publish node on success 182 status_t (*detect_controller)(pci_device_module_info *pci, pci_device *pciDevice, 183 device_node *parent, uint16 bus_master_base, 184 const char *controller_driver, const char *controller_driver_type, 185 const char *controller_name, bool can_dma, bool can_cq, 186 uint32 dma_alignment, uint32 dma_boundary, uint32 max_sg_block_size, 187 device_node **node); 188 // standard master probe for controller that registers controller and channel nodes 189 status_t (*probe_controller)(device_node *parent, const char *controller_driver, 190 const char *controller_driver_type, const char *controller_name, 191 const char *channel_module_name, bool can_dma, bool can_cq, 192 uint32 dma_alignment, uint32 dma_boundary, uint32 max_sg_block_size, 193 bool supports_compatibility_mode); 194} ata_adapter_interface; 195 196 197#define ATA_ADAPTER_MODULE_NAME "generic/ata_adapter/v1" 198 199#endif /* _ATA_PCI_H */ 200