1/*- 2 * SPDX-License-Identifier: BSD-3-Clause 3 * 4 * Copyright (c) 1982, 1986, 1993 5 * The Regents of the University of California. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. Neither the name of the University nor the names of its contributors 16 * may be used to endorse or promote products derived from this software 17 * without specific prior written permission. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29 * SUCH DAMAGE. 30 */ 31 32#ifndef _SYS_MTIO_H_ 33#define _SYS_MTIO_H_ 34 35#ifndef _KERNEL 36#include <sys/types.h> 37#endif 38#include <sys/ioccom.h> 39 40/* 41 * Structures and definitions for mag tape io control commands 42 */ 43 44/* structure for MTIOCTOP - mag tape op command */ 45struct mtop { 46 short mt_op; /* operations defined below */ 47 int32_t mt_count; /* how many of them */ 48}; 49 50/* operations */ 51#define MTWEOF 0 /* write an end-of-file record */ 52#define MTFSF 1 /* forward space file */ 53#define MTBSF 2 /* backward space file */ 54#define MTFSR 3 /* forward space record */ 55#define MTBSR 4 /* backward space record */ 56#define MTREW 5 /* rewind */ 57#define MTOFFL 6 /* rewind and put the drive offline */ 58#define MTNOP 7 /* no operation, sets status only */ 59#define MTCACHE 8 /* enable controller cache */ 60#define MTNOCACHE 9 /* disable controller cache */ 61 62#if defined(__FreeBSD__) 63/* Set block size for device. If device is a variable size dev */ 64/* a non zero parameter will change the device to a fixed block size */ 65/* device with block size set to that of the parameter passed in. */ 66/* Resetting the block size to 0 will restore the device to a variable */ 67/* block size device. */ 68 69#define MTSETBSIZ 10 70 71/* Set density values for device. Sets the value for the opened mode only. */ 72 73#define MTSETDNSTY 11 74 75#define MTERASE 12 /* erase to EOM */ 76#define MTEOD 13 /* Space to EOM */ 77#define MTCOMP 14 /* select compression mode 0=off, 1=def */ 78#define MTRETENS 15 /* re-tension tape */ 79#define MTWSS 16 /* write setmark(s) */ 80#define MTFSS 17 /* forward space setmark */ 81#define MTBSS 18 /* backward space setmark */ 82#define MTLOAD 19 /* load tape in drive */ 83#define MTWEOFI 20 /* write an end-of-file record without waiting*/ 84 85#define MT_COMP_ENABLE 0xffffffff 86#define MT_COMP_DISABLED 0xfffffffe 87#define MT_COMP_UNSUPP 0xfffffffd 88 89/* 90 * Values in mt_dsreg that say what the device is doing 91 */ 92#define MTIO_DSREG_NIL 0 /* Unknown */ 93#define MTIO_DSREG_REST 1 /* Doing Nothing */ 94#define MTIO_DSREG_RBSY 2 /* Communicating with tape (but no motion) */ 95#define MTIO_DSREG_WR 20 /* Writing */ 96#define MTIO_DSREG_FMK 21 /* Writing Filemarks */ 97#define MTIO_DSREG_ZER 22 /* Erasing */ 98#define MTIO_DSREG_RD 30 /* Reading */ 99#define MTIO_DSREG_FWD 40 /* Spacing Forward */ 100#define MTIO_DSREG_REV 41 /* Spacing Reverse */ 101#define MTIO_DSREG_POS 42 /* Hardware Positioning (direction unknown) */ 102#define MTIO_DSREG_REW 43 /* Rewinding */ 103#define MTIO_DSREG_TEN 44 /* Retensioning */ 104#define MTIO_DSREG_UNL 45 /* Unloading */ 105#define MTIO_DSREG_LD 46 /* Loading */ 106 107#endif /* __FreeBSD__ */ 108 109/* structure for MTIOCGET - mag tape get status command */ 110 111struct mtget { 112 short mt_type; /* type of magtape device */ 113/* the following two registers are grossly device dependent */ 114 short mt_dsreg; /* ``drive status'' register */ 115 short mt_erreg; /* ``error'' register */ 116/* end device-dependent registers */ 117 /* 118 * Note that the residual count, while maintained, may be 119 * be nonsense because the size of the residual may (greatly) 120 * exceed 32 K-bytes. Use the MTIOCERRSTAT ioctl to get a 121 * more accurate count. 122 */ 123 short mt_resid; /* residual count */ 124#if defined (__FreeBSD__) 125 int32_t mt_blksiz; /* presently operating blocksize */ 126 int32_t mt_density; /* presently operating density */ 127 u_int32_t mt_comp; /* presently operating compression */ 128 int32_t mt_blksiz0; /* blocksize for mode 0 */ 129 int32_t mt_blksiz1; /* blocksize for mode 1 */ 130 int32_t mt_blksiz2; /* blocksize for mode 2 */ 131 int32_t mt_blksiz3; /* blocksize for mode 3 */ 132 int32_t mt_density0; /* density for mode 0 */ 133 int32_t mt_density1; /* density for mode 1 */ 134 int32_t mt_density2; /* density for mode 2 */ 135 int32_t mt_density3; /* density for mode 3 */ 136/* the following are not yet implemented */ 137 u_int32_t mt_comp0; /* compression type for mode 0 */ 138 u_int32_t mt_comp1; /* compression type for mode 1 */ 139 u_int32_t mt_comp2; /* compression type for mode 2 */ 140 u_int32_t mt_comp3; /* compression type for mode 3 */ 141/* end not yet implemented */ 142#endif 143 int32_t mt_fileno; /* relative file number of current position */ 144 int32_t mt_blkno; /* relative block number of current position */ 145}; 146 147/* structure for MTIOCERRSTAT - tape get error status command */ 148/* really only supported for SCSI tapes right now */ 149struct scsi_tape_errors { 150 /* 151 * These are latched from the last command that had a SCSI 152 * Check Condition noted for these operations. The act 153 * of issuing an MTIOCERRSTAT unlatches and clears them. 154 */ 155 u_int8_t io_sense[32]; /* Last Sense Data For Data I/O */ 156 int32_t io_resid; /* residual count from last Data I/O */ 157 u_int8_t io_cdb[16]; /* Command that Caused the Last Data Sense */ 158 u_int8_t ctl_sense[32]; /* Last Sense Data For Control I/O */ 159 int32_t ctl_resid; /* residual count from last Control I/O */ 160 u_int8_t ctl_cdb[16]; /* Command that Caused the Last Control Sense */ 161 /* 162 * These are the read and write cumulative error counters. 163 * (how to reset cumulative error counters is not yet defined). 164 * (not implemented as yet but space is being reserved for them) 165 */ 166 struct { 167 u_int32_t retries; /* total # retries performed */ 168 u_int32_t corrected; /* total # corrections performed */ 169 u_int32_t processed; /* total # corrections successful */ 170 u_int32_t failures; /* total # corrections/retries failed */ 171 u_int64_t nbytes; /* total # bytes processed */ 172 } wterr, rderr; 173}; 174 175union mterrstat { 176 struct scsi_tape_errors scsi_errstat; 177 char _reserved_padding[256]; 178}; 179 180struct mtrblim { 181 uint32_t granularity; 182 uint32_t min_block_length; 183 uint32_t max_block_length; 184}; 185 186typedef enum { 187 MT_LOCATE_DEST_OBJECT = 0x00, 188 MT_LOCATE_DEST_FILE = 0x01, 189 MT_LOCATE_DEST_SET = 0x02, 190 MT_LOCATE_DEST_EOD = 0x03 191} mt_locate_dest_type; 192 193typedef enum { 194 MT_LOCATE_BAM_IMPLICIT = 0x00, 195 MT_LOCATE_BAM_EXPLICIT = 0x01 196} mt_locate_bam; 197 198typedef enum { 199 MT_LOCATE_FLAG_IMMED = 0x01, 200 MT_LOCATE_FLAG_CHANGE_PART = 0x02 201} mt_locate_flags; 202 203struct mtlocate { 204 mt_locate_flags flags; 205 mt_locate_dest_type dest_type; 206 mt_locate_bam block_address_mode; 207 int64_t partition; 208 uint64_t logical_id; 209 uint8_t reserved[64]; 210}; 211 212typedef enum { 213 MT_EXT_GET_NONE, 214 MT_EXT_GET_OK, 215 MT_EXT_GET_NEED_MORE_SPACE, 216 MT_EXT_GET_ERROR 217} mt_ext_get_status; 218 219struct mtextget { 220 uint32_t alloc_len; 221 char *status_xml; 222 uint32_t fill_len; 223 mt_ext_get_status status; 224 char error_str[128]; 225 uint8_t reserved[64]; 226}; 227 228#define MT_EXT_GET_ROOT_NAME "mtextget" 229#define MT_DENSITY_ROOT_NAME "mtdensity" 230#define MT_MEDIA_DENSITY_NAME "media_density" 231#define MT_DENSITY_REPORT_NAME "density_report" 232#define MT_MEDIUM_TYPE_REPORT_NAME "medium_type_report" 233#define MT_MEDIA_REPORT_NAME "media_report" 234#define MT_DENSITY_ENTRY_NAME "density_entry" 235 236#define MT_DENS_WRITE_OK 0x80 237#define MT_DENS_DUP 0x40 238#define MT_DENS_DEFLT 0x20 239 240#define MT_PARAM_FIXED_STR_LEN 32 241union mt_param_value { 242 int64_t value_signed; 243 uint64_t value_unsigned; 244 char *value_var_str; 245 char value_fixed_str[MT_PARAM_FIXED_STR_LEN]; 246 uint8_t reserved[64]; 247}; 248 249typedef enum { 250 MT_PARAM_SET_NONE, 251 MT_PARAM_SET_SIGNED, 252 MT_PARAM_SET_UNSIGNED, 253 MT_PARAM_SET_VAR_STR, 254 MT_PARAM_SET_FIXED_STR 255} mt_param_set_type; 256 257typedef enum { 258 MT_PARAM_STATUS_NONE, 259 MT_PARAM_STATUS_OK, 260 MT_PARAM_STATUS_ERROR 261} mt_param_set_status; 262 263#define MT_PARAM_VALUE_NAME_LEN 64 264struct mtparamset { 265 char value_name[MT_PARAM_VALUE_NAME_LEN]; 266 mt_param_set_type value_type; 267 int value_len; 268 union mt_param_value value; 269 mt_param_set_status status; 270 char error_str[128]; 271}; 272 273#define MT_PARAM_ROOT_NAME "mtparamget" 274#define MT_PROTECTION_NAME "protection" 275 276/* 277 * Set a list of parameters. 278 */ 279struct mtsetlist { 280 int num_params; 281 int param_len; 282 struct mtparamset *params; 283}; 284 285/* 286 * Constants for mt_type byte. These are the same 287 * for controllers compatible with the types listed. 288 */ 289#define MT_ISTS 0x01 /* TS-11 */ 290#define MT_ISHT 0x02 /* TM03 Massbus: TE16, TU45, TU77 */ 291#define MT_ISTM 0x03 /* TM11/TE10 Unibus */ 292#define MT_ISMT 0x04 /* TM78/TU78 Massbus */ 293#define MT_ISUT 0x05 /* SI TU-45 emulation on Unibus */ 294#define MT_ISCPC 0x06 /* SUN */ 295#define MT_ISAR 0x07 /* SUN */ 296#define MT_ISTMSCP 0x08 /* DEC TMSCP protocol (TU81, TK50) */ 297#define MT_ISCY 0x09 /* CCI Cipher */ 298#define MT_ISCT 0x0a /* HP 1/4 tape */ 299#define MT_ISFHP 0x0b /* HP 7980 1/2 tape */ 300#define MT_ISEXABYTE 0x0c /* Exabyte */ 301#define MT_ISEXA8200 0x0c /* Exabyte EXB-8200 */ 302#define MT_ISEXA8500 0x0d /* Exabyte EXB-8500 */ 303#define MT_ISVIPER1 0x0e /* Archive Viper-150 */ 304#define MT_ISPYTHON 0x0f /* Archive Python (DAT) */ 305#define MT_ISHPDAT 0x10 /* HP 35450A DAT drive */ 306#define MT_ISMFOUR 0x11 /* M4 Data 1/2 9track drive */ 307#define MT_ISTK50 0x12 /* DEC SCSI TK50 */ 308#define MT_ISMT02 0x13 /* Emulex MT02 SCSI tape controller */ 309 310/* mag tape io control commands */ 311#define MTIOCTOP _IOW('m', 1, struct mtop) /* do a mag tape op */ 312#define MTIOCGET _IOR('m', 2, struct mtget) /* get tape status */ 313/* these two do not appear to be used anywhere */ 314#define MTIOCIEOT _IO('m', 3) /* ignore EOT error */ 315#define MTIOCEEOT _IO('m', 4) /* enable EOT error */ 316/* 317 * When more SCSI-3 SSC (streaming device) devices are out there 318 * that support the full 32 byte type 2 structure, we'll have to 319 * rethink these ioctls to support all the entities they haul into 320 * the picture (64 bit blocks, logical file record numbers, etc..). 321 */ 322#define MTIOCRDSPOS _IOR('m', 5, u_int32_t) /* get logical blk addr */ 323#define MTIOCRDHPOS _IOR('m', 6, u_int32_t) /* get hardware blk addr */ 324#define MTIOCSLOCATE _IOW('m', 5, u_int32_t) /* seek to logical blk addr */ 325#define MTIOCHLOCATE _IOW('m', 6, u_int32_t) /* seek to hardware blk addr */ 326#define MTIOCERRSTAT _IOR('m', 7, union mterrstat) /* get tape errors */ 327 328/* 329 * Set EOT model- argument is number of filemarks to end a tape with. 330 * Note that not all possible values will be accepted. 331 */ 332#define MTIOCSETEOTMODEL _IOW('m', 8, u_int32_t) 333/* Get current EOT model */ 334#define MTIOCGETEOTMODEL _IOR('m', 8, u_int32_t) 335 336#define MTIOCRBLIM _IOR('m', 9, struct mtrblim) /* get block limits */ 337#define MTIOCEXTLOCATE _IOW('m', 10, struct mtlocate) /* seek to position */ 338#define MTIOCEXTGET _IOWR('m', 11, struct mtextget) /* get tape status */ 339#define MTIOCPARAMGET _IOWR('m', 12, struct mtextget) /* get tape params */ 340#define MTIOCPARAMSET _IOWR('m', 13, struct mtparamset) /* set tape params */ 341#define MTIOCSETLIST _IOWR('m', 14, struct mtsetlist) /* set N params */ 342 343#ifndef _KERNEL 344#define DEFTAPE "/dev/nsa0" 345#endif 346 347#endif /* !_SYS_MTIO_H_ */ 348