1/*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright 2013 Oleksandr Tymoshenko <gonzo@freebsd.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29#include <sys/cdefs.h> 30#include "opt_syscons.h" 31#include <sys/param.h> 32#include <sys/systm.h> 33#include <sys/kernel.h> 34#include <sys/module.h> 35#include <sys/clock.h> 36#include <sys/eventhandler.h> 37#include <sys/time.h> 38#include <sys/bus.h> 39#include <sys/lock.h> 40#include <sys/mutex.h> 41#include <sys/resource.h> 42#include <sys/rman.h> 43#include <sys/sysctl.h> 44#include <vm/vm.h> 45#include <vm/pmap.h> 46#include <sys/fbio.h> 47#include <sys/consio.h> 48 49#include <machine/bus.h> 50 51#include <dev/clk/clk.h> 52 53#include <dev/fdt/fdt_common.h> 54#include <dev/ofw/openfirm.h> 55#include <dev/ofw/ofw_bus.h> 56#include <dev/ofw/ofw_bus_subr.h> 57 58#include <dev/videomode/videomode.h> 59#include <dev/videomode/edidvar.h> 60 61#include <dev/fb/fbreg.h> 62#ifdef DEV_SC 63#include <dev/syscons/syscons.h> 64#else /* VT */ 65#include <dev/vt/vt.h> 66#endif 67 68#include <arm/ti/ti_sysc.h> 69#include <arm/ti/ti_scm.h> 70 71#include "am335x_lcd.h" 72#include "am335x_pwm.h" 73 74#include "fb_if.h" 75#include "crtc_if.h" 76 77#define LCD_PID 0x00 78#define LCD_CTRL 0x04 79#define CTRL_DIV_MASK 0xff 80#define CTRL_DIV_SHIFT 8 81#define CTRL_AUTO_UFLOW_RESTART (1 << 1) 82#define CTRL_RASTER_MODE 1 83#define CTRL_LIDD_MODE 0 84#define LCD_LIDD_CTRL 0x0C 85#define LCD_LIDD_CS0_CONF 0x10 86#define LCD_LIDD_CS0_ADDR 0x14 87#define LCD_LIDD_CS0_DATA 0x18 88#define LCD_LIDD_CS1_CONF 0x1C 89#define LCD_LIDD_CS1_ADDR 0x20 90#define LCD_LIDD_CS1_DATA 0x24 91#define LCD_RASTER_CTRL 0x28 92#define RASTER_CTRL_TFT24_UNPACKED (1 << 26) 93#define RASTER_CTRL_TFT24 (1 << 25) 94#define RASTER_CTRL_STN565 (1 << 24) 95#define RASTER_CTRL_TFTPMAP (1 << 23) 96#define RASTER_CTRL_NIBMODE (1 << 22) 97#define RASTER_CTRL_PALMODE_SHIFT 20 98#define PALETTE_PALETTE_AND_DATA 0x00 99#define PALETTE_PALETTE_ONLY 0x01 100#define PALETTE_DATA_ONLY 0x02 101#define RASTER_CTRL_REQDLY_SHIFT 12 102#define RASTER_CTRL_MONO8B (1 << 9) 103#define RASTER_CTRL_RBORDER (1 << 8) 104#define RASTER_CTRL_LCDTFT (1 << 7) 105#define RASTER_CTRL_LCDBW (1 << 1) 106#define RASTER_CTRL_LCDEN (1 << 0) 107#define LCD_RASTER_TIMING_0 0x2C 108#define RASTER_TIMING_0_HBP_SHIFT 24 109#define RASTER_TIMING_0_HFP_SHIFT 16 110#define RASTER_TIMING_0_HSW_SHIFT 10 111#define RASTER_TIMING_0_PPLLSB_SHIFT 4 112#define RASTER_TIMING_0_PPLMSB_SHIFT 3 113#define LCD_RASTER_TIMING_1 0x30 114#define RASTER_TIMING_1_VBP_SHIFT 24 115#define RASTER_TIMING_1_VFP_SHIFT 16 116#define RASTER_TIMING_1_VSW_SHIFT 10 117#define RASTER_TIMING_1_LPP_SHIFT 0 118#define LCD_RASTER_TIMING_2 0x34 119#define RASTER_TIMING_2_HSWHI_SHIFT 27 120#define RASTER_TIMING_2_LPP_B10_SHIFT 26 121#define RASTER_TIMING_2_PHSVS (1 << 25) 122#define RASTER_TIMING_2_PHSVS_RISE (1 << 24) 123#define RASTER_TIMING_2_PHSVS_FALL (0 << 24) 124#define RASTER_TIMING_2_IOE (1 << 23) 125#define RASTER_TIMING_2_IPC (1 << 22) 126#define RASTER_TIMING_2_IHS (1 << 21) 127#define RASTER_TIMING_2_IVS (1 << 20) 128#define RASTER_TIMING_2_ACBI_SHIFT 16 129#define RASTER_TIMING_2_ACB_SHIFT 8 130#define RASTER_TIMING_2_HBPHI_SHIFT 4 131#define RASTER_TIMING_2_HFPHI_SHIFT 0 132#define LCD_RASTER_SUBPANEL 0x38 133#define LCD_RASTER_SUBPANEL2 0x3C 134#define LCD_LCDDMA_CTRL 0x40 135#define LCDDMA_CTRL_DMA_MASTER_PRIO_SHIFT 16 136#define LCDDMA_CTRL_TH_FIFO_RDY_SHIFT 8 137#define LCDDMA_CTRL_BURST_SIZE_SHIFT 4 138#define LCDDMA_CTRL_BYTES_SWAP (1 << 3) 139#define LCDDMA_CTRL_BE (1 << 1) 140#define LCDDMA_CTRL_FB0_ONLY 0 141#define LCDDMA_CTRL_FB0_FB1 (1 << 0) 142#define LCD_LCDDMA_FB0_BASE 0x44 143#define LCD_LCDDMA_FB0_CEILING 0x48 144#define LCD_LCDDMA_FB1_BASE 0x4C 145#define LCD_LCDDMA_FB1_CEILING 0x50 146#define LCD_SYSCONFIG 0x54 147#define SYSCONFIG_STANDBY_FORCE (0 << 4) 148#define SYSCONFIG_STANDBY_NONE (1 << 4) 149#define SYSCONFIG_STANDBY_SMART (2 << 4) 150#define SYSCONFIG_IDLE_FORCE (0 << 2) 151#define SYSCONFIG_IDLE_NONE (1 << 2) 152#define SYSCONFIG_IDLE_SMART (2 << 2) 153#define LCD_IRQSTATUS_RAW 0x58 154#define LCD_IRQSTATUS 0x5C 155#define LCD_IRQENABLE_SET 0x60 156#define LCD_IRQENABLE_CLEAR 0x64 157#define IRQ_EOF1 (1 << 9) 158#define IRQ_EOF0 (1 << 8) 159#define IRQ_PL (1 << 6) 160#define IRQ_FUF (1 << 5) 161#define IRQ_ACB (1 << 3) 162#define IRQ_SYNC_LOST (1 << 2) 163#define IRQ_RASTER_DONE (1 << 1) 164#define IRQ_FRAME_DONE (1 << 0) 165#define LCD_END_OF_INT_IND 0x68 166#define LCD_CLKC_ENABLE 0x6C 167#define CLKC_ENABLE_DMA (1 << 2) 168#define CLKC_ENABLE_LDID (1 << 1) 169#define CLKC_ENABLE_CORE (1 << 0) 170#define LCD_CLKC_RESET 0x70 171#define CLKC_RESET_MAIN (1 << 3) 172#define CLKC_RESET_DMA (1 << 2) 173#define CLKC_RESET_LDID (1 << 1) 174#define CLKC_RESET_CORE (1 << 0) 175 176#define LCD_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx) 177#define LCD_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx) 178#define LCD_LOCK_INIT(_sc) mtx_init(&(_sc)->sc_mtx, \ 179 device_get_nameunit(_sc->sc_dev), "am335x_lcd", MTX_DEF) 180#define LCD_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->sc_mtx); 181 182#define LCD_READ4(_sc, reg) bus_read_4((_sc)->sc_mem_res, reg); 183#define LCD_WRITE4(_sc, reg, value) \ 184 bus_write_4((_sc)->sc_mem_res, reg, value); 185 186/* Backlight is controlled by eCAS interface on PWM unit 0 */ 187#define PWM_UNIT 0 188#define PWM_PERIOD 100 189 190#define MODE_HBP(mode) ((mode)->htotal - (mode)->hsync_end) 191#define MODE_HFP(mode) ((mode)->hsync_start - (mode)->hdisplay) 192#define MODE_HSW(mode) ((mode)->hsync_end - (mode)->hsync_start) 193#define MODE_VBP(mode) ((mode)->vtotal - (mode)->vsync_end) 194#define MODE_VFP(mode) ((mode)->vsync_start - (mode)->vdisplay) 195#define MODE_VSW(mode) ((mode)->vsync_end - (mode)->vsync_start) 196 197#define MAX_PIXEL_CLOCK 126000 198#define MAX_BANDWIDTH (1280*1024*60) 199 200struct am335x_lcd_softc { 201 device_t sc_dev; 202 struct fb_info sc_fb_info; 203 struct resource *sc_mem_res; 204 struct resource *sc_irq_res; 205 void *sc_intr_hl; 206 struct mtx sc_mtx; 207 int sc_backlight; 208 struct sysctl_oid *sc_oid; 209 210 struct panel_info sc_panel; 211 212 /* Framebuffer */ 213 bus_dma_tag_t sc_dma_tag; 214 bus_dmamap_t sc_dma_map; 215 size_t sc_fb_size; 216 bus_addr_t sc_fb_phys; 217 uint8_t *sc_fb_base; 218 219 /* HDMI framer */ 220 phandle_t sc_hdmi_framer; 221 eventhandler_tag sc_hdmi_evh; 222 223 /* Clock */ 224 clk_t sc_clk_dpll_disp_ck; 225}; 226 227static void 228am335x_fb_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int err) 229{ 230 bus_addr_t *addr; 231 232 if (err) 233 return; 234 235 addr = (bus_addr_t*)arg; 236 *addr = segs[0].ds_addr; 237} 238 239static uint32_t 240am335x_lcd_calc_divisor(uint32_t reference, uint32_t freq) 241{ 242 uint32_t div, i; 243 uint32_t delta, min_delta; 244 245 min_delta = freq; 246 div = 255; 247 248 /* Raster mode case: divisors are in range from 2 to 255 */ 249 for (i = 2; i < 255; i++) { 250 delta = abs(reference/i - freq); 251 if (delta < min_delta) { 252 div = i; 253 min_delta = delta; 254 } 255 } 256 257 return (div); 258} 259 260static int 261am335x_lcd_sysctl_backlight(SYSCTL_HANDLER_ARGS) 262{ 263 struct am335x_lcd_softc *sc = (struct am335x_lcd_softc*)arg1; 264 int error; 265 int backlight; 266 267 backlight = sc->sc_backlight; 268 error = sysctl_handle_int(oidp, &backlight, 0, req); 269 270 if (error != 0 || req->newptr == NULL) 271 return (error); 272 273 if (backlight < 0) 274 backlight = 0; 275 if (backlight > 100) 276 backlight = 100; 277 278 LCD_LOCK(sc); 279 error = am335x_pwm_config_ecap(PWM_UNIT, PWM_PERIOD, 280 backlight*PWM_PERIOD/100); 281 if (error == 0) 282 sc->sc_backlight = backlight; 283 LCD_UNLOCK(sc); 284 285 return (error); 286} 287 288static uint32_t 289am335x_mode_vrefresh(const struct videomode *mode) 290{ 291 uint32_t refresh; 292 293 /* Calculate vertical refresh rate */ 294 refresh = (mode->dot_clock * 1000 / mode->htotal); 295 refresh = (refresh + mode->vtotal / 2) / mode->vtotal; 296 297 if (mode->flags & VID_INTERLACE) 298 refresh *= 2; 299 if (mode->flags & VID_DBLSCAN) 300 refresh /= 2; 301 302 return refresh; 303} 304 305static int 306am335x_mode_is_valid(const struct videomode *mode) 307{ 308 uint32_t hbp, hfp, hsw; 309 uint32_t vbp, vfp, vsw; 310 311 if (mode->dot_clock > MAX_PIXEL_CLOCK) 312 return (0); 313 314 if (mode->hdisplay & 0xf) 315 return (0); 316 317 if (mode->vdisplay > 2048) 318 return (0); 319 320 /* Check ranges for timing parameters */ 321 hbp = MODE_HBP(mode) - 1; 322 hfp = MODE_HFP(mode) - 1; 323 hsw = MODE_HSW(mode) - 1; 324 vbp = MODE_VBP(mode); 325 vfp = MODE_VFP(mode); 326 vsw = MODE_VSW(mode) - 1; 327 328 if (hbp > 0x3ff) 329 return (0); 330 if (hfp > 0x3ff) 331 return (0); 332 if (hsw > 0x3ff) 333 return (0); 334 335 if (vbp > 0xff) 336 return (0); 337 if (vfp > 0xff) 338 return (0); 339 if (vsw > 0x3f) 340 return (0); 341 if (mode->vdisplay*mode->hdisplay*am335x_mode_vrefresh(mode) 342 > MAX_BANDWIDTH) 343 return (0); 344 345 return (1); 346} 347 348static void 349am335x_read_hdmi_property(device_t dev) 350{ 351 phandle_t node, xref; 352 phandle_t endpoint; 353 phandle_t hdmi_xref; 354 struct am335x_lcd_softc *sc; 355 356 sc = device_get_softc(dev); 357 node = ofw_bus_get_node(dev); 358 sc->sc_hdmi_framer = 0; 359 360 /* 361 * Old FreeBSD way of referencing to HDMI framer 362 */ 363 if (OF_getencprop(node, "hdmi", &hdmi_xref, sizeof(hdmi_xref)) != -1) { 364 sc->sc_hdmi_framer = hdmi_xref; 365 return; 366 } 367 368 /* 369 * Use bindings described in Linux docs: 370 * bindings/media/video-interfaces.txt 371 * We assume that the only endpoint in LCDC node 372 * is HDMI framer. 373 */ 374 node = ofw_bus_find_child(node, "port"); 375 376 /* No media bindings */ 377 if (node == 0) 378 return; 379 380 for (endpoint = OF_child(node); endpoint != 0; endpoint = OF_peer(endpoint)) { 381 if (OF_getencprop(endpoint, "remote-endpoint", &xref, sizeof(xref)) != -1) { 382 /* port/port@0/endpoint@0 */ 383 node = OF_node_from_xref(xref); 384 /* port/port@0 */ 385 node = OF_parent(node); 386 /* port */ 387 node = OF_parent(node); 388 /* actual owner of port, in our case HDMI framer */ 389 sc->sc_hdmi_framer = OF_xref_from_node(OF_parent(node)); 390 if (sc->sc_hdmi_framer != 0) 391 return; 392 } 393 } 394} 395 396static int 397am335x_read_property(device_t dev, phandle_t node, const char *name, uint32_t *val) 398{ 399 pcell_t cell; 400 401 if ((OF_getencprop(node, name, &cell, sizeof(cell))) <= 0) { 402 device_printf(dev, "missing '%s' attribute in LCD panel info\n", 403 name); 404 return (ENXIO); 405 } 406 407 *val = cell; 408 409 return (0); 410} 411 412static int 413am335x_read_timing(device_t dev, phandle_t node, struct panel_info *panel) 414{ 415 int error; 416 phandle_t timings_node, timing_node, native; 417 418 timings_node = ofw_bus_find_child(node, "display-timings"); 419 if (timings_node == 0) { 420 device_printf(dev, "no \"display-timings\" node\n"); 421 return (-1); 422 } 423 424 if (OF_searchencprop(timings_node, "native-mode", &native, 425 sizeof(native)) == -1) { 426 device_printf(dev, "no \"native-mode\" reference in \"timings\" node\n"); 427 return (-1); 428 } 429 430 timing_node = OF_node_from_xref(native); 431 432 error = 0; 433 if ((error = am335x_read_property(dev, timing_node, 434 "hactive", &panel->panel_width))) 435 goto out; 436 437 if ((error = am335x_read_property(dev, timing_node, 438 "vactive", &panel->panel_height))) 439 goto out; 440 441 if ((error = am335x_read_property(dev, timing_node, 442 "hfront-porch", &panel->panel_hfp))) 443 goto out; 444 445 if ((error = am335x_read_property(dev, timing_node, 446 "hback-porch", &panel->panel_hbp))) 447 goto out; 448 449 if ((error = am335x_read_property(dev, timing_node, 450 "hsync-len", &panel->panel_hsw))) 451 goto out; 452 453 if ((error = am335x_read_property(dev, timing_node, 454 "vfront-porch", &panel->panel_vfp))) 455 goto out; 456 457 if ((error = am335x_read_property(dev, timing_node, 458 "vback-porch", &panel->panel_vbp))) 459 goto out; 460 461 if ((error = am335x_read_property(dev, timing_node, 462 "vsync-len", &panel->panel_vsw))) 463 goto out; 464 465 if ((error = am335x_read_property(dev, timing_node, 466 "clock-frequency", &panel->panel_pxl_clk))) 467 goto out; 468 469 if ((error = am335x_read_property(dev, timing_node, 470 "pixelclk-active", &panel->pixelclk_active))) 471 goto out; 472 473 if ((error = am335x_read_property(dev, timing_node, 474 "hsync-active", &panel->hsync_active))) 475 goto out; 476 477 if ((error = am335x_read_property(dev, timing_node, 478 "vsync-active", &panel->vsync_active))) 479 goto out; 480 481out: 482 return (error); 483} 484 485static int 486am335x_read_panel_info(device_t dev, phandle_t node, struct panel_info *panel) 487{ 488 phandle_t panel_info_node; 489 490 panel_info_node = ofw_bus_find_child(node, "panel-info"); 491 if (panel_info_node == 0) 492 return (-1); 493 494 am335x_read_property(dev, panel_info_node, 495 "ac-bias", &panel->ac_bias); 496 497 am335x_read_property(dev, panel_info_node, 498 "ac-bias-intrpt", &panel->ac_bias_intrpt); 499 500 am335x_read_property(dev, panel_info_node, 501 "dma-burst-sz", &panel->dma_burst_sz); 502 503 am335x_read_property(dev, panel_info_node, 504 "bpp", &panel->bpp); 505 506 am335x_read_property(dev, panel_info_node, 507 "fdd", &panel->fdd); 508 509 am335x_read_property(dev, panel_info_node, 510 "sync-edge", &panel->sync_edge); 511 512 am335x_read_property(dev, panel_info_node, 513 "sync-ctrl", &panel->sync_ctrl); 514 515 return (0); 516} 517 518static void 519am335x_lcd_intr(void *arg) 520{ 521 struct am335x_lcd_softc *sc = arg; 522 uint32_t reg; 523 524 reg = LCD_READ4(sc, LCD_IRQSTATUS); 525 LCD_WRITE4(sc, LCD_IRQSTATUS, reg); 526 /* Read value back to make sure it reached the hardware */ 527 reg = LCD_READ4(sc, LCD_IRQSTATUS); 528 529 if (reg & IRQ_SYNC_LOST) { 530 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 531 reg &= ~RASTER_CTRL_LCDEN; 532 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 533 534 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 535 reg |= RASTER_CTRL_LCDEN; 536 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 537 goto done; 538 } 539 540 if (reg & IRQ_PL) { 541 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 542 reg &= ~RASTER_CTRL_LCDEN; 543 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 544 545 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 546 reg |= RASTER_CTRL_LCDEN; 547 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 548 goto done; 549 } 550 551 if (reg & IRQ_EOF0) { 552 LCD_WRITE4(sc, LCD_LCDDMA_FB0_BASE, sc->sc_fb_phys); 553 LCD_WRITE4(sc, LCD_LCDDMA_FB0_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1); 554 reg &= ~IRQ_EOF0; 555 } 556 557 if (reg & IRQ_EOF1) { 558 LCD_WRITE4(sc, LCD_LCDDMA_FB1_BASE, sc->sc_fb_phys); 559 LCD_WRITE4(sc, LCD_LCDDMA_FB1_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1); 560 reg &= ~IRQ_EOF1; 561 } 562 563 if (reg & IRQ_FUF) { 564 /* TODO: Handle FUF */ 565 } 566 567 if (reg & IRQ_ACB) { 568 /* TODO: Handle ACB */ 569 } 570 571done: 572 LCD_WRITE4(sc, LCD_END_OF_INT_IND, 0); 573 /* Read value back to make sure it reached the hardware */ 574 reg = LCD_READ4(sc, LCD_END_OF_INT_IND); 575} 576 577static const struct videomode * 578am335x_lcd_pick_mode(struct edid_info *ei) 579{ 580 const struct videomode *videomode; 581 const struct videomode *m; 582 int n; 583 584 /* Get standard VGA as default */ 585 videomode = NULL; 586 587 /* 588 * Pick a mode. 589 */ 590 if (ei->edid_preferred_mode != NULL) { 591 if (am335x_mode_is_valid(ei->edid_preferred_mode)) 592 videomode = ei->edid_preferred_mode; 593 } 594 595 if (videomode == NULL) { 596 m = ei->edid_modes; 597 598 sort_modes(ei->edid_modes, 599 &ei->edid_preferred_mode, 600 ei->edid_nmodes); 601 for (n = 0; n < ei->edid_nmodes; n++) 602 if (am335x_mode_is_valid(&m[n])) { 603 videomode = &m[n]; 604 break; 605 } 606 } 607 608 return videomode; 609} 610 611static int 612am335x_lcd_configure(struct am335x_lcd_softc *sc) 613{ 614 int div; 615 uint32_t reg, timing0, timing1, timing2; 616 uint32_t burst_log; 617 size_t dma_size; 618 uint32_t hbp, hfp, hsw; 619 uint32_t vbp, vfp, vsw; 620 uint32_t width, height; 621 uint64_t ref_freq; 622 int err; 623 624 /* 625 * try to adjust clock to get double of requested frequency 626 * HDMI/DVI displays are very sensitive to error in frequncy value 627 */ 628 629 err = clk_set_freq(sc->sc_clk_dpll_disp_ck, sc->sc_panel.panel_pxl_clk*2, 630 CLK_SET_ROUND_ANY); 631 if (err != 0) { 632 device_printf(sc->sc_dev, "can't set source frequency\n"); 633 return (ENXIO); 634 } 635 636 err = clk_get_freq(sc->sc_clk_dpll_disp_ck, &ref_freq); 637 if (err != 0) { 638 device_printf(sc->sc_dev, "can't get reference frequency\n"); 639 return (ENXIO); 640 } 641 642 /* Panel initialization */ 643 dma_size = round_page(sc->sc_panel.panel_width*sc->sc_panel.panel_height*sc->sc_panel.bpp/8); 644 645 /* 646 * Now allocate framebuffer memory 647 */ 648 err = bus_dma_tag_create( 649 bus_get_dma_tag(sc->sc_dev), 650 4, 0, /* alignment, boundary */ 651 BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ 652 BUS_SPACE_MAXADDR, /* highaddr */ 653 NULL, NULL, /* filter, filterarg */ 654 dma_size, 1, /* maxsize, nsegments */ 655 dma_size, 0, /* maxsegsize, flags */ 656 NULL, NULL, /* lockfunc, lockarg */ 657 &sc->sc_dma_tag); 658 if (err) 659 goto done; 660 661 err = bus_dmamem_alloc(sc->sc_dma_tag, (void **)&sc->sc_fb_base, 662 BUS_DMA_COHERENT, &sc->sc_dma_map); 663 664 if (err) { 665 device_printf(sc->sc_dev, "cannot allocate framebuffer\n"); 666 goto done; 667 } 668 669 err = bus_dmamap_load(sc->sc_dma_tag, sc->sc_dma_map, sc->sc_fb_base, 670 dma_size, am335x_fb_dmamap_cb, &sc->sc_fb_phys, BUS_DMA_NOWAIT); 671 672 if (err) { 673 device_printf(sc->sc_dev, "cannot load DMA map\n"); 674 goto done; 675 } 676 677 /* Make sure it's blank */ 678 memset(sc->sc_fb_base, 0x0, dma_size); 679 680 /* Calculate actual FB Size */ 681 sc->sc_fb_size = sc->sc_panel.panel_width*sc->sc_panel.panel_height*sc->sc_panel.bpp/8; 682 683 /* Only raster mode is supported */ 684 reg = CTRL_RASTER_MODE; 685 div = am335x_lcd_calc_divisor(ref_freq, sc->sc_panel.panel_pxl_clk); 686 reg |= (div << CTRL_DIV_SHIFT); 687 LCD_WRITE4(sc, LCD_CTRL, reg); 688 689 /* Set timing */ 690 timing0 = timing1 = timing2 = 0; 691 692 hbp = sc->sc_panel.panel_hbp - 1; 693 hfp = sc->sc_panel.panel_hfp - 1; 694 hsw = sc->sc_panel.panel_hsw - 1; 695 696 vbp = sc->sc_panel.panel_vbp; 697 vfp = sc->sc_panel.panel_vfp; 698 vsw = sc->sc_panel.panel_vsw - 1; 699 700 height = sc->sc_panel.panel_height - 1; 701 width = sc->sc_panel.panel_width - 1; 702 703 /* Horizontal back porch */ 704 timing0 |= (hbp & 0xff) << RASTER_TIMING_0_HBP_SHIFT; 705 timing2 |= ((hbp >> 8) & 3) << RASTER_TIMING_2_HBPHI_SHIFT; 706 /* Horizontal front porch */ 707 timing0 |= (hfp & 0xff) << RASTER_TIMING_0_HFP_SHIFT; 708 timing2 |= ((hfp >> 8) & 3) << RASTER_TIMING_2_HFPHI_SHIFT; 709 /* Horizontal sync width */ 710 timing0 |= (hsw & 0x3f) << RASTER_TIMING_0_HSW_SHIFT; 711 timing2 |= ((hsw >> 6) & 0xf) << RASTER_TIMING_2_HSWHI_SHIFT; 712 713 /* Vertical back porch, front porch, sync width */ 714 timing1 |= (vbp & 0xff) << RASTER_TIMING_1_VBP_SHIFT; 715 timing1 |= (vfp & 0xff) << RASTER_TIMING_1_VFP_SHIFT; 716 timing1 |= (vsw & 0x3f) << RASTER_TIMING_1_VSW_SHIFT; 717 718 /* Pixels per line */ 719 timing0 |= ((width >> 10) & 1) 720 << RASTER_TIMING_0_PPLMSB_SHIFT; 721 timing0 |= ((width >> 4) & 0x3f) 722 << RASTER_TIMING_0_PPLLSB_SHIFT; 723 724 /* Lines per panel */ 725 timing1 |= (height & 0x3ff) 726 << RASTER_TIMING_1_LPP_SHIFT; 727 timing2 |= ((height >> 10 ) & 1) 728 << RASTER_TIMING_2_LPP_B10_SHIFT; 729 730 /* clock signal settings */ 731 if (sc->sc_panel.sync_ctrl) 732 timing2 |= RASTER_TIMING_2_PHSVS; 733 if (sc->sc_panel.sync_edge) 734 timing2 |= RASTER_TIMING_2_PHSVS_RISE; 735 else 736 timing2 |= RASTER_TIMING_2_PHSVS_FALL; 737 if (sc->sc_panel.hsync_active == 0) 738 timing2 |= RASTER_TIMING_2_IHS; 739 if (sc->sc_panel.vsync_active == 0) 740 timing2 |= RASTER_TIMING_2_IVS; 741 if (sc->sc_panel.pixelclk_active == 0) 742 timing2 |= RASTER_TIMING_2_IPC; 743 744 /* AC bias */ 745 timing2 |= (sc->sc_panel.ac_bias << RASTER_TIMING_2_ACB_SHIFT); 746 timing2 |= (sc->sc_panel.ac_bias_intrpt << RASTER_TIMING_2_ACBI_SHIFT); 747 748 LCD_WRITE4(sc, LCD_RASTER_TIMING_0, timing0); 749 LCD_WRITE4(sc, LCD_RASTER_TIMING_1, timing1); 750 LCD_WRITE4(sc, LCD_RASTER_TIMING_2, timing2); 751 752 /* DMA settings */ 753 reg = LCDDMA_CTRL_FB0_FB1; 754 /* Find power of 2 for current burst size */ 755 switch (sc->sc_panel.dma_burst_sz) { 756 case 1: 757 burst_log = 0; 758 break; 759 case 2: 760 burst_log = 1; 761 break; 762 case 4: 763 burst_log = 2; 764 break; 765 case 8: 766 burst_log = 3; 767 break; 768 case 16: 769 default: 770 burst_log = 4; 771 break; 772 } 773 reg |= (burst_log << LCDDMA_CTRL_BURST_SIZE_SHIFT); 774 /* XXX: FIFO TH */ 775 reg |= (0 << LCDDMA_CTRL_TH_FIFO_RDY_SHIFT); 776 LCD_WRITE4(sc, LCD_LCDDMA_CTRL, reg); 777 778 LCD_WRITE4(sc, LCD_LCDDMA_FB0_BASE, sc->sc_fb_phys); 779 LCD_WRITE4(sc, LCD_LCDDMA_FB0_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1); 780 LCD_WRITE4(sc, LCD_LCDDMA_FB1_BASE, sc->sc_fb_phys); 781 LCD_WRITE4(sc, LCD_LCDDMA_FB1_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1); 782 783 /* Enable LCD */ 784 reg = RASTER_CTRL_LCDTFT; 785 reg |= (sc->sc_panel.fdd << RASTER_CTRL_REQDLY_SHIFT); 786 reg |= (PALETTE_DATA_ONLY << RASTER_CTRL_PALMODE_SHIFT); 787 if (sc->sc_panel.bpp >= 24) 788 reg |= RASTER_CTRL_TFT24; 789 if (sc->sc_panel.bpp == 32) 790 reg |= RASTER_CTRL_TFT24_UNPACKED; 791 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 792 793 LCD_WRITE4(sc, LCD_CLKC_ENABLE, 794 CLKC_ENABLE_DMA | CLKC_ENABLE_LDID | CLKC_ENABLE_CORE); 795 796 LCD_WRITE4(sc, LCD_CLKC_RESET, CLKC_RESET_MAIN); 797 DELAY(100); 798 LCD_WRITE4(sc, LCD_CLKC_RESET, 0); 799 800 reg = IRQ_EOF1 | IRQ_EOF0 | IRQ_FUF | IRQ_PL | 801 IRQ_ACB | IRQ_SYNC_LOST | IRQ_RASTER_DONE | 802 IRQ_FRAME_DONE; 803 LCD_WRITE4(sc, LCD_IRQENABLE_SET, reg); 804 805 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 806 reg |= RASTER_CTRL_LCDEN; 807 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 808 809 LCD_WRITE4(sc, LCD_SYSCONFIG, 810 SYSCONFIG_STANDBY_SMART | SYSCONFIG_IDLE_SMART); 811 812 sc->sc_fb_info.fb_name = device_get_nameunit(sc->sc_dev); 813 sc->sc_fb_info.fb_vbase = (intptr_t)sc->sc_fb_base; 814 sc->sc_fb_info.fb_pbase = sc->sc_fb_phys; 815 sc->sc_fb_info.fb_size = sc->sc_fb_size; 816 sc->sc_fb_info.fb_bpp = sc->sc_fb_info.fb_depth = sc->sc_panel.bpp; 817 sc->sc_fb_info.fb_stride = sc->sc_panel.panel_width*sc->sc_panel.bpp / 8; 818 sc->sc_fb_info.fb_width = sc->sc_panel.panel_width; 819 sc->sc_fb_info.fb_height = sc->sc_panel.panel_height; 820 821#ifdef DEV_SC 822 err = (sc_attach_unit(device_get_unit(sc->sc_dev), 823 device_get_flags(sc->sc_dev) | SC_AUTODETECT_KBD)); 824 825 if (err) { 826 device_printf(sc->sc_dev, "failed to attach syscons\n"); 827 goto fail; 828 } 829 830 am335x_lcd_syscons_setup((vm_offset_t)sc->sc_fb_base, sc->sc_fb_phys, &panel); 831#else /* VT */ 832 device_t fbd = device_add_child(sc->sc_dev, "fbd", 833 device_get_unit(sc->sc_dev)); 834 if (fbd != NULL) { 835 if (device_probe_and_attach(fbd) != 0) 836 device_printf(sc->sc_dev, "failed to attach fbd device\n"); 837 } else 838 device_printf(sc->sc_dev, "failed to add fbd child\n"); 839#endif 840 841done: 842 return (err); 843} 844 845static void 846am335x_lcd_hdmi_event(void *arg, device_t hdmi, int event) 847{ 848 struct am335x_lcd_softc *sc; 849 const struct videomode *videomode; 850 struct videomode hdmi_mode; 851 device_t hdmi_dev; 852 uint8_t *edid; 853 uint32_t edid_len; 854 struct edid_info ei; 855 856 sc = arg; 857 858 /* Nothing to work with */ 859 if (!sc->sc_hdmi_framer) { 860 device_printf(sc->sc_dev, "HDMI event without HDMI framer set\n"); 861 return; 862 } 863 864 hdmi_dev = OF_device_from_xref(sc->sc_hdmi_framer); 865 if (!hdmi_dev) { 866 device_printf(sc->sc_dev, "no actual device for \"hdmi\" property\n"); 867 return; 868 } 869 870 edid = NULL; 871 edid_len = 0; 872 if (CRTC_GET_EDID(hdmi_dev, &edid, &edid_len) != 0) { 873 device_printf(sc->sc_dev, "failed to get EDID info from HDMI framer\n"); 874 return; 875 } 876 877 videomode = NULL; 878 879 if (edid_parse(edid, &ei) == 0) { 880 edid_print(&ei); 881 videomode = am335x_lcd_pick_mode(&ei); 882 } else 883 device_printf(sc->sc_dev, "failed to parse EDID\n"); 884 885 /* Use standard VGA as fallback */ 886 if (videomode == NULL) 887 videomode = pick_mode_by_ref(640, 480, 60); 888 889 if (videomode == NULL) { 890 device_printf(sc->sc_dev, "failed to find usable videomode"); 891 return; 892 } 893 894 device_printf(sc->sc_dev, "detected videomode: %dx%d @ %dKHz\n", videomode->hdisplay, 895 videomode->vdisplay, am335x_mode_vrefresh(videomode)); 896 897 sc->sc_panel.panel_width = videomode->hdisplay; 898 sc->sc_panel.panel_height = videomode->vdisplay; 899 sc->sc_panel.panel_hfp = videomode->hsync_start - videomode->hdisplay; 900 sc->sc_panel.panel_hbp = videomode->htotal - videomode->hsync_end; 901 sc->sc_panel.panel_hsw = videomode->hsync_end - videomode->hsync_start; 902 sc->sc_panel.panel_vfp = videomode->vsync_start - videomode->vdisplay; 903 sc->sc_panel.panel_vbp = videomode->vtotal - videomode->vsync_end; 904 sc->sc_panel.panel_vsw = videomode->vsync_end - videomode->vsync_start; 905 sc->sc_panel.pixelclk_active = 1; 906 907 /* logic for HSYNC should be reversed */ 908 if (videomode->flags & VID_NHSYNC) 909 sc->sc_panel.hsync_active = 1; 910 else 911 sc->sc_panel.hsync_active = 0; 912 913 if (videomode->flags & VID_NVSYNC) 914 sc->sc_panel.vsync_active = 0; 915 else 916 sc->sc_panel.vsync_active = 1; 917 918 sc->sc_panel.panel_pxl_clk = videomode->dot_clock * 1000; 919 920 am335x_lcd_configure(sc); 921 922 memcpy(&hdmi_mode, videomode, sizeof(hdmi_mode)); 923 hdmi_mode.hskew = videomode->hsync_end - videomode->hsync_start; 924 hdmi_mode.flags |= VID_HSKEW; 925 926 CRTC_SET_VIDEOMODE(hdmi_dev, &hdmi_mode); 927} 928 929static int 930am335x_lcd_probe(device_t dev) 931{ 932#ifdef DEV_SC 933 int err; 934#endif 935 936 if (!ofw_bus_status_okay(dev)) 937 return (ENXIO); 938 939 if (!ofw_bus_is_compatible(dev, "ti,am33xx-tilcdc")) 940 return (ENXIO); 941 942 device_set_desc(dev, "AM335x LCD controller"); 943 944#ifdef DEV_SC 945 err = sc_probe_unit(device_get_unit(dev), 946 device_get_flags(dev) | SC_AUTODETECT_KBD); 947 if (err != 0) 948 return (err); 949#endif 950 951 return (BUS_PROBE_DEFAULT); 952} 953 954static int 955am335x_lcd_attach(device_t dev) 956{ 957 struct am335x_lcd_softc *sc; 958 959 int err; 960 int rid; 961 struct sysctl_ctx_list *ctx; 962 struct sysctl_oid *tree; 963 phandle_t root, panel_node; 964 965 err = 0; 966 sc = device_get_softc(dev); 967 sc->sc_dev = dev; 968 969 am335x_read_hdmi_property(dev); 970 971 root = OF_finddevice("/"); 972 if (root == -1) { 973 device_printf(dev, "failed to get FDT root node\n"); 974 return (ENXIO); 975 } 976 977 /* Fixme: Cant find any reference in DTS for dpll_disp_ck@498 for now. */ 978 err = clk_get_by_name(dev, "dpll_disp_ck@498", &sc->sc_clk_dpll_disp_ck); 979 if (err != 0) { 980 device_printf(dev, "Cant get dpll_disp_ck@49\n"); 981 return (ENXIO); 982 } 983 984 sc->sc_panel.ac_bias = 255; 985 sc->sc_panel.ac_bias_intrpt = 0; 986 sc->sc_panel.dma_burst_sz = 16; 987 sc->sc_panel.bpp = 16; 988 sc->sc_panel.fdd = 128; 989 sc->sc_panel.sync_edge = 0; 990 sc->sc_panel.sync_ctrl = 1; 991 992 panel_node = fdt_find_compatible(root, "ti,tilcdc,panel", 1); 993 if (panel_node != 0) { 994 device_printf(dev, "using static panel info\n"); 995 if (am335x_read_panel_info(dev, panel_node, &sc->sc_panel)) { 996 device_printf(dev, "failed to read panel info\n"); 997 return (ENXIO); 998 } 999 1000 if (am335x_read_timing(dev, panel_node, &sc->sc_panel)) { 1001 device_printf(dev, "failed to read timings\n"); 1002 return (ENXIO); 1003 } 1004 } 1005 1006 err = ti_sysc_clock_enable(device_get_parent(dev)); 1007 if (err != 0) { 1008 device_printf(dev, "Failed to enable sysc clkctrl, err %d\n", err); 1009 return (ENXIO); 1010 } 1011 1012 rid = 0; 1013 sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 1014 RF_ACTIVE); 1015 if (!sc->sc_mem_res) { 1016 device_printf(dev, "cannot allocate memory window\n"); 1017 return (ENXIO); 1018 } 1019 1020 rid = 0; 1021 sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 1022 RF_ACTIVE); 1023 if (!sc->sc_irq_res) { 1024 bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res); 1025 device_printf(dev, "cannot allocate interrupt\n"); 1026 return (ENXIO); 1027 } 1028 1029 if (bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_MISC | INTR_MPSAFE, 1030 NULL, am335x_lcd_intr, sc, 1031 &sc->sc_intr_hl) != 0) { 1032 bus_release_resource(dev, SYS_RES_IRQ, rid, 1033 sc->sc_irq_res); 1034 bus_release_resource(dev, SYS_RES_MEMORY, rid, 1035 sc->sc_mem_res); 1036 device_printf(dev, "Unable to setup the irq handler.\n"); 1037 return (ENXIO); 1038 } 1039 1040 LCD_LOCK_INIT(sc); 1041 1042 /* Init backlight interface */ 1043 ctx = device_get_sysctl_ctx(sc->sc_dev); 1044 tree = device_get_sysctl_tree(sc->sc_dev); 1045 sc->sc_oid = SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 1046 "backlight", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_NEEDGIANT, sc, 0, 1047 am335x_lcd_sysctl_backlight, "I", "LCD backlight"); 1048 sc->sc_backlight = 0; 1049 /* Check if eCAS interface is available at this point */ 1050 if (am335x_pwm_config_ecap(PWM_UNIT, 1051 PWM_PERIOD, PWM_PERIOD) == 0) 1052 sc->sc_backlight = 100; 1053 1054 if (panel_node != 0) 1055 am335x_lcd_configure(sc); 1056 else 1057 sc->sc_hdmi_evh = EVENTHANDLER_REGISTER(hdmi_event, 1058 am335x_lcd_hdmi_event, sc, EVENTHANDLER_PRI_ANY); 1059 1060 return (0); 1061} 1062 1063static int 1064am335x_lcd_detach(device_t dev) 1065{ 1066 /* Do not let unload driver */ 1067 return (EBUSY); 1068} 1069 1070static struct fb_info * 1071am335x_lcd_fb_getinfo(device_t dev) 1072{ 1073 struct am335x_lcd_softc *sc; 1074 1075 sc = device_get_softc(dev); 1076 1077 return (&sc->sc_fb_info); 1078} 1079 1080static device_method_t am335x_lcd_methods[] = { 1081 DEVMETHOD(device_probe, am335x_lcd_probe), 1082 DEVMETHOD(device_attach, am335x_lcd_attach), 1083 DEVMETHOD(device_detach, am335x_lcd_detach), 1084 1085 /* Framebuffer service methods */ 1086 DEVMETHOD(fb_getinfo, am335x_lcd_fb_getinfo), 1087 1088 DEVMETHOD_END 1089}; 1090 1091static driver_t am335x_lcd_driver = { 1092 "fb", 1093 am335x_lcd_methods, 1094 sizeof(struct am335x_lcd_softc), 1095}; 1096 1097DRIVER_MODULE(am335x_lcd, simplebus, am335x_lcd_driver, 0, 0); 1098MODULE_VERSION(am335x_lcd, 1); 1099MODULE_DEPEND(am335x_lcd, simplebus, 1, 1, 1); 1100MODULE_DEPEND(am335x_lcd, ti_sysc, 1, 1, 1); 1101