1# /etc/bootptab: database for bootp server (/etc/bootpd)
2# Last update: gwr, Sun Dec 12 19:00:00 EDT 1993
3# Blank lines and lines beginning with '#' are ignored.
4#
5#
6# Legend:	(see bootptab.5)
7#	first field -- hostname (not indented)
8#	bf -- bootfile
9#	bs -- bootfile size in 512-octet blocks
10#	cs -- cookie servers
11#	df -- dump file name
12#	dn -- domain name
13#	ds -- domain name servers
14#	ef -- extension file
15#	gw -- gateways
16#	ha -- hardware address
17#	hd -- home directory for bootfiles
18#	hn -- host name set for client
19#	ht -- hardware type
20#	im -- impress servers
21#	ip -- host IP address
22#	lg -- log servers
23#	lp -- LPR servers
24#	ns -- IEN-116 name servers
25#	ra -- reply address
26#	rl -- resource location protocol servers
27#	rp -- root path
28#	sa -- boot server address
29#	sm -- subnet mask
30#	sw -- swap server
31#	tc -- template host (points to similar host entry)
32#	td -- TFTP directory
33#	to -- time offset (seconds)
34#	ts -- time servers
35#	vm -- vendor magic number
36#	Tn -- generic option tag n
37#
38# Be careful about including backslashes where they're needed.  Weird (bad)
39# things can happen when a backslash is omitted where one is intended.
40# Also, note that generic option data must be either a string or a
41# sequence of bytes where each byte is a two-digit hex value.
42
43# First, we define a global entry which specifies the stuff every host uses.
44
45# If you leave "td" empty, run bootpd with the "-c /tftpboot" switch
46# so path names (boot files) will be interpreted relative to the same
47# directory as tftpd will use when opening files.
48.default:\
49	:hn:dn="mc.com":\
50	:td=/tftpboot:\
51	:ds=merlin, jericho:\
52	:to=auto:
53
54# Next, we can define different master entries for each subnet. . .
55
56.subnet16:\
57	:tc=.default:\
58	:sm=255.255.255.0:\
59	:gw=merlin:\
60	:sa=merlin:
61
62.subnet17:\
63	:tc=.default:\
64	:sm=255.255.255.0:\
65	:gw=merlin-gw:\
66	:sa=merlin-gw:
67
68#
69# We should be able to use as many levels of indirection as desired.  Use
70# your imagination. . .
71#
72
73# Individual entries (could also have different servers for some/all of these
74# hosts, but we don't really use this feature at CMU):
75
76# Emulex terminal server
77emulex:	tc=.subnet16:ha=00.00.C9.00.42.E0:bf=P4KTL0E:
78
79# Lantronix eps1
80eps1:	tc=.subnet16:ha=00.80.A3.04.1D.78:
81
82# Tadpole 885 board.
83tp885:  tc=.subnet17:ha=08.00.4C.00.2F.74:bf=tp885sys2.cfe:
84
85# MVME147 VxWorks board.
86#mvme147:tc=.subnet17:ha=08.00.3e.20.da.47:bf=mv147vxw.st:
87
88# These are just for testing
89bach:  tc=.subnet16:ha="08:00:20:04:98:8d":bf=boot.sun4m:
90xanadu:tc=.subnet17:ha="00:80:42:42:04:c7":bf=boot.sun4c:
91