icom.h revision 290001 
1/*
2 * Header file for ICOM radios
3 */
4#include "ntp_types.h"
5
6/*
7 * Common definitions
8 */
9#define P_ERMSG	0x1		/* trace bus error messages */
10#define P_TRACE 0x2		/* trace CI-V messges */
11#define RETRY	3		/* max packet retries */
12#define IBAUD	B1200		/* autotune port speed */
13
14/*
15 * Radio identifier codes
16 */
17#define IC1271	0x24
18#define IC1275	0x18
19#define IC271	0x20
20#define IC275	0x10
21#define IC375	0x12
22#define IC471	0x22
23#define IC475	0x14
24#define IC575	0x16
25#define IC725	0x28
26#define IC726	0x30
27#define IC735	0x04
28#define IC751	0x1c
29#define IC761	0x1e
30#define IC765	0x2c
31#define IC775	0x46
32#define IC781	0x26
33#define IC970	0x2e
34#define R7000	0x08
35#define R71	0x1a
36#define R7100	0x34
37#define R72	0x32
38#define R8500	0x4a
39#define R9000	0x2a
40
41/*
42 * CI-V frame codes
43 */
44#define PR	0xfe		/* preamble */
45#define TX	0xe0		/* controller address */
46#define FI	0xfd		/* end of message */
47#define ACK	0xfb		/* controller normal reply */
48#define NAK	0xfa		/* controller error reply */
49#define PAD	0xff		/* transmit padding */
50
51/*
52 * CI-V controller commands
53 */
54#define V_FREQT	0x00		/* freq set (transceive) */
55#define V_MODET	0x01		/* set mode (transceive) */
56#define V_RBAND	0x02		/* read band edge */
57#define V_RFREQ	0x03		/* read frequency */
58#define V_RMODE	0x04		/* read mode */
59#define V_SFREQ	0x05		/* set frequency */
60#define V_SMODE	0x06		/* set mode */
61#define V_SVFO	0x07		/* select vfo */
62#define V_SMEM	0x08		/* select channel/bank */
63#define V_WRITE	0x09		/* write channel */
64#define V_VFOM	0x0a		/* memory -> vfo */
65#define V_CLEAR	0x0b		/* clear channel */
66#define V_ROFFS	0x0c		/* read tx offset */
67#define V_SOFFS	0x0d		/* write tx offset */
68#define V_SCAN	0x0e		/* scan control */
69#define V_SPLIT	0x0f		/* split control */
70#define V_DIAL	0x10		/* set dial tuning step */
71#define V_ATTEN	0x11		/* set attenuator */
72#define V_SANT	0x12		/* select antenna */
73#define V_ANNC	0x13		/* announce control */
74#define V_WRCTL	0x14		/* write controls */
75#define V_RDCTL	0x15		/* read controls */
76#define V_TOGL	0x16		/* set switches */
77#define V_ASCII	0x17		/* send CW message */
78#define V_POWER	0x18		/* power control */
79#define V_RDID	0x19		/* read model ID */
80#define V_SETW	0x1a		/* read/write channel/bank data */
81#define V_CTRL	0x7f		/* miscellaneous control */
82
83/*
84 * Function prototypes
85 */
86int	icom_init		(const char *, int, int);
87int	icom_freq		(int, int, double);
88