1/* $FreeBSD$ */
2/*
3 * Copyright (c) 2000 by Matthew Jacob
4 * All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 *    notice, this list of conditions, and the following disclaimer,
11 *    without modification, immediately at the beginning of the file.
12 * 2. The name of the author may not be used to endorse or promote products
13 *    derived from this software without specific prior written permission.
14 *
15 * Alternatively, this software may be distributed under the terms of the
16 * the GNU Public License ("GPL").
17 *
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
22 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28 * SUCH DAMAGE.
29 *
30 * Matthew Jacob
31 * Feral Software
32 * mjacob@feral.com
33 */
34
35#include <sys/types.h>
36
37#include <err.h>
38#include <stddef.h>
39#include <stdlib.h>
40#include <stdio.h>
41#include <cam/scsi/scsi_enc.h>
42#include <libxo/xo.h>
43
44#include "eltsub.h"
45
46/*
47 * offset by +20 degrees.
48 * The range of the value expresses a temperature between -19 and +235 degrees
49 * Celsius. A value of 00h is reserved.
50 */
51#define TEMPERATURE_OFFSET 20
52
53const char *
54geteltnm(int type)
55{
56	static char rbuf[132];
57
58	switch (type) {
59	case ELMTYP_UNSPECIFIED:
60		return ("Unspecified");
61	case ELMTYP_DEVICE:
62		return ("Device Slot");
63	case ELMTYP_POWER:
64		return ("Power Supply");
65	case ELMTYP_FAN:
66		return ("Cooling");
67	case ELMTYP_THERM:
68		return ("Temperature Sensor");
69	case ELMTYP_DOORLOCK:
70		return ("Door Lock");
71	case ELMTYP_ALARM:
72		return ("Audible Alarm");
73	case ELMTYP_ESCC:
74		return ("Enclosure Services Controller Electronics");
75	case ELMTYP_SCC:
76		return ("SCC Controller Electronics");
77	case ELMTYP_NVRAM:
78		return ("Nonvolatile Cache");
79	case ELMTYP_INV_OP_REASON:
80		return ("Invalid Operation Reason");
81	case ELMTYP_UPS:
82		return ("Uninterruptible Power Supply");
83	case ELMTYP_DISPLAY:
84		return ("Display");
85	case ELMTYP_KEYPAD:
86		return ("Key Pad Entry");
87	case ELMTYP_ENCLOSURE:
88		return ("Enclosure");
89	case ELMTYP_SCSIXVR:
90		return ("SCSI Port/Transceiver");
91	case ELMTYP_LANGUAGE:
92		return ("Language");
93	case ELMTYP_COMPORT:
94		return ("Communication Port");
95	case ELMTYP_VOM:
96		return ("Voltage Sensor");
97	case ELMTYP_AMMETER:
98		return ("Current Sensor");
99	case ELMTYP_SCSI_TGT:
100		return ("SCSI Target Port");
101	case ELMTYP_SCSI_INI:
102		return ("SCSI Initiator Port");
103	case ELMTYP_SUBENC:
104		return ("Simple Subenclosure");
105	case ELMTYP_ARRAY_DEV:
106		return ("Array Device Slot");
107	case ELMTYP_SAS_EXP:
108		return ("SAS Expander");
109	case ELMTYP_SAS_CONN:
110		return ("SAS Connector");
111	default:
112		snprintf(rbuf, sizeof(rbuf), "<Type 0x%x>", type);
113		return (rbuf);
114	}
115}
116
117const char *
118scode2ascii(u_char code)
119{
120	static char rbuf[32];
121	switch (code & 0xf) {
122	case SES_OBJSTAT_UNSUPPORTED:
123		return ("Unsupported");
124	case SES_OBJSTAT_OK:
125		return ("OK");
126	case SES_OBJSTAT_CRIT:
127		return ("Critical");
128	case SES_OBJSTAT_NONCRIT:
129		return ("Noncritical");
130	case SES_OBJSTAT_UNRECOV:
131		return ("Unrecoverable");
132	case SES_OBJSTAT_NOTINSTALLED:
133		return ("Not Installed");
134	case SES_OBJSTAT_UNKNOWN:
135		return ("Unknown");
136	case SES_OBJSTAT_NOTAVAIL:
137		return ("Not Available");
138	case SES_OBJSTAT_NOACCESS:
139		return ("No Access Allowed");
140	default:
141		snprintf(rbuf, sizeof(rbuf), "<Status 0x%x>", code & 0xf);
142		return (rbuf);
143	}
144}
145