rc.c revision 330897
1/*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (C) 1995 by Pavel Antonov, Moscow, Russia. 5 * Copyright (C) 1995 by Andrey A. Chernov, Moscow, Russia. 6 * Copyright (C) 2002 by John Baldwin <jhb@FreeBSD.org> 7 * All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * $FreeBSD: stable/11/sys/dev/rc/rc.c 330897 2018-03-14 03:19:51Z eadler $ 31 */ 32 33/* 34 * SDL Communications Riscom/8 (based on Cirrus Logic CL-CD180) driver 35 * 36 */ 37 38/*#define RCDEBUG*/ 39 40#include "opt_tty.h" 41 42#include <sys/param.h> 43#include <sys/systm.h> 44#include <sys/bus.h> 45#include <sys/conf.h> 46#include <sys/fcntl.h> 47#include <sys/interrupt.h> 48#include <sys/kernel.h> 49#include <sys/malloc.h> 50#include <sys/module.h> 51#include <sys/serial.h> 52#include <sys/tty.h> 53#include <machine/bus.h> 54#include <machine/resource.h> 55#include <sys/rman.h> 56 57#include <dev/ic/cd180.h> 58#include <dev/rc/rcreg.h> 59#include <isa/isavar.h> 60 61#define IOBASE_ADDRS 14 62 63#define rcin(sc, port) RC_IN(sc, port) 64#define rcout(sc, port, v) RC_OUT(sc, port, v) 65 66#define WAITFORCCR(sc, chan) rc_wait0((sc), (chan), __LINE__) 67 68#define CCRCMD(sc, chan, cmd) do { \ 69 WAITFORCCR((sc), (chan)); \ 70 rcout((sc), CD180_CCR, (cmd)); \ 71} while (0) 72 73#define RC_IBUFSIZE 256 74#define RB_I_HIGH_WATER (TTYHOG - 2 * RC_IBUFSIZE) 75#define RC_OBUFSIZE 512 76#define RC_IHIGHWATER (3 * RC_IBUFSIZE / 4) 77#define INPUT_FLAGS_SHIFT (2 * RC_IBUFSIZE) 78#define LOTS_OF_EVENTS 64 79 80#define RC_FAKEID 0x10 81 82/* Per-channel structure */ 83struct rc_chans { 84 struct rc_softc *rc_rcb; /* back ptr */ 85 u_short rc_flags; /* Misc. flags */ 86 int rc_chan; /* Channel # */ 87 u_char rc_ier; /* intr. enable reg */ 88 u_char rc_msvr; /* modem sig. status */ 89 u_char rc_cor2; /* options reg */ 90 u_char rc_pendcmd; /* special cmd pending */ 91 u_int rc_dcdwaits; /* how many waits DCD in open */ 92 struct tty *rc_tp; /* tty struct */ 93 u_char *rc_iptr; /* Chars input buffer */ 94 u_char *rc_hiwat; /* hi-water mark */ 95 u_char *rc_bufend; /* end of buffer */ 96 u_char *rc_optr; /* ptr in output buf */ 97 u_char *rc_obufend; /* end of output buf */ 98 u_char rc_ibuf[4 * RC_IBUFSIZE]; /* input buffer */ 99 u_char rc_obuf[RC_OBUFSIZE]; /* output buffer */ 100 struct callout rc_dtrcallout; 101}; 102 103/* Per-board structure */ 104struct rc_softc { 105 device_t sc_dev; 106 struct resource *sc_irq; 107 struct resource *sc_port[IOBASE_ADDRS]; 108 int sc_irqrid; 109 void *sc_hwicookie; 110 bus_space_tag_t sc_bt; 111 bus_space_handle_t sc_bh; 112 u_int sc_unit; /* unit # */ 113 u_char sc_dtr; /* DTR status */ 114 int sc_scheduled_event; 115 void *sc_swicookie; 116 struct rc_chans sc_channels[CD180_NCHAN]; /* channels */ 117}; 118 119/* Static prototypes */ 120static t_close_t rc_close; 121static void rc_break(struct tty *, int); 122static void rc_release_resources(device_t dev); 123static void rc_intr(void *); 124static void rc_hwreset(struct rc_softc *, unsigned int); 125static int rc_test(struct rc_softc *); 126static void rc_discard_output(struct rc_chans *); 127static int rc_modem(struct tty *, int, int); 128static void rc_start(struct tty *); 129static void rc_stop(struct tty *, int rw); 130static int rc_param(struct tty *, struct termios *); 131static void rc_pollcard(void *); 132static void rc_reinit(struct rc_softc *); 133#ifdef RCDEBUG 134static void printrcflags(); 135#endif 136static void rc_wait0(struct rc_softc *sc, int chan, int line); 137 138static devclass_t rc_devclass; 139 140/* Flags */ 141#define RC_DTR_OFF 0x0001 /* DTR wait, for close/open */ 142#define RC_ACTOUT 0x0002 /* Dial-out port active */ 143#define RC_RTSFLOW 0x0004 /* RTS flow ctl enabled */ 144#define RC_CTSFLOW 0x0008 /* CTS flow ctl enabled */ 145#define RC_DORXFER 0x0010 /* RXFER event planned */ 146#define RC_DOXXFER 0x0020 /* XXFER event planned */ 147#define RC_MODCHG 0x0040 /* Modem status changed */ 148#define RC_OSUSP 0x0080 /* Output suspended */ 149#define RC_OSBUSY 0x0100 /* start() routine in progress */ 150#define RC_WAS_BUFOVFL 0x0200 /* low-level buffer ovferflow */ 151#define RC_WAS_SILOVFL 0x0400 /* silo buffer overflow */ 152#define RC_SEND_RDY 0x0800 /* ready to send */ 153 154/* Table for translation of RCSR status bits to internal form */ 155static int rc_rcsrt[16] = { 156 0, TTY_OE, TTY_FE, 157 TTY_FE|TTY_OE, TTY_PE, TTY_PE|TTY_OE, 158 TTY_PE|TTY_FE, TTY_PE|TTY_FE|TTY_OE, TTY_BI, 159 TTY_BI|TTY_OE, TTY_BI|TTY_FE, TTY_BI|TTY_FE|TTY_OE, 160 TTY_BI|TTY_PE, TTY_BI|TTY_PE|TTY_OE, TTY_BI|TTY_PE|TTY_FE, 161 TTY_BI|TTY_PE|TTY_FE|TTY_OE 162}; 163 164static int rc_ports[] = 165 { 0x220, 0x240, 0x250, 0x260, 0x2a0, 0x2b0, 0x300, 0x320 }; 166static int iobase_addrs[IOBASE_ADDRS] = 167 { 0, 0x400, 0x800, 0xc00, 0x1400, 0x1800, 0x1c00, 0x2000, 168 0x3000, 0x3400, 0x3800, 0x3c00, 0x4000, 0x8000 }; 169 170/**********************************************/ 171 172static int 173rc_probe(device_t dev) 174{ 175 u_int port; 176 int i, found; 177 178 /* 179 * We don't know of any PnP ID's for these cards. 180 */ 181 if (isa_get_logicalid(dev) != 0) 182 return (ENXIO); 183 184 /* 185 * We have to have an IO port hint that is valid. 186 */ 187 port = isa_get_port(dev); 188 if (port == -1) 189 return (ENXIO); 190 found = 0; 191 for (i = 0; i < nitems(rc_ports); i++) 192 if (rc_ports[i] == port) { 193 found = 1; 194 break; 195 } 196 if (!found) 197 return (ENXIO); 198 199 /* 200 * We have to have an IRQ hint. 201 */ 202 if (isa_get_irq(dev) == -1) 203 return (ENXIO); 204 205 device_set_desc(dev, "SDL Riscom/8"); 206 return (0); 207} 208 209static int 210rc_attach(device_t dev) 211{ 212 struct rc_chans *rc; 213 struct tty *tp; 214 struct rc_softc *sc; 215 u_int port; 216 int base, chan, error, i, x; 217 218 sc = device_get_softc(dev); 219 sc->sc_dev = dev; 220 221 /* 222 * We need to have IO ports. Lots of them. We need 223 * the following ranges relative to the base port: 224 * 0x0 - 0x10 225 * 0x400 - 0x410 226 * 0x800 - 0x810 227 * 0xc00 - 0xc10 228 * 0x1400 - 0x1410 229 * 0x1800 - 0x1810 230 * 0x1c00 - 0x1c10 231 * 0x2000 - 0x2010 232 * 0x3000 - 0x3010 233 * 0x3400 - 0x3410 234 * 0x3800 - 0x3810 235 * 0x3c00 - 0x3c10 236 * 0x4000 - 0x4010 237 * 0x8000 - 0x8010 238 */ 239 port = isa_get_port(dev); 240 for (i = 0; i < IOBASE_ADDRS; i++) 241 if (bus_set_resource(dev, SYS_RES_IOPORT, i, 242 port + iobase_addrs[i], 0x10) != 0) 243 return (ENXIO); 244 error = ENOMEM; 245 for (i = 0; i < IOBASE_ADDRS; i++) { 246 x = i; 247 sc->sc_port[i] = bus_alloc_resource_anywhere(dev, 248 SYS_RES_IOPORT, &x, 0x10, RF_ACTIVE); 249 if (x != i) { 250 device_printf(dev, "ioport %d was rid %d\n", i, x); 251 goto fail; 252 } 253 if (sc->sc_port[i] == NULL) { 254 device_printf(dev, "failed to alloc ioports %x-%x\n", 255 port + iobase_addrs[i], 256 port + iobase_addrs[i] + 0x10); 257 goto fail; 258 } 259 } 260 sc->sc_bt = rman_get_bustag(sc->sc_port[0]); 261 sc->sc_bh = rman_get_bushandle(sc->sc_port[0]); 262 263 sc->sc_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->sc_irqrid, 264 RF_ACTIVE); 265 if (sc->sc_irq == NULL) { 266 device_printf(dev, "failed to alloc IRQ\n"); 267 goto fail; 268 } 269 270 /* 271 * Now do some actual tests to make sure it works. 272 */ 273 error = ENXIO; 274 rcout(sc, CD180_PPRL, 0x22); /* Random values to Prescale reg. */ 275 rcout(sc, CD180_PPRH, 0x11); 276 if (rcin(sc, CD180_PPRL) != 0x22 || rcin(sc, CD180_PPRH) != 0x11) 277 goto fail; 278 if (rc_test(sc)) 279 goto fail; 280 281 /* 282 * Ok, start actually hooking things up. 283 */ 284 sc->sc_unit = device_get_unit(dev); 285 /*sc->sc_chipid = 0x10 + device_get_unit(dev);*/ 286 device_printf(dev, "%d chans, firmware rev. %c\n", 287 CD180_NCHAN, (rcin(sc, CD180_GFRCR) & 0xF) + 'A'); 288 rc = sc->sc_channels; 289 base = CD180_NCHAN * sc->sc_unit; 290 for (chan = 0; chan < CD180_NCHAN; chan++, rc++) { 291 rc->rc_rcb = sc; 292 rc->rc_chan = chan; 293 rc->rc_iptr = rc->rc_ibuf; 294 rc->rc_bufend = &rc->rc_ibuf[RC_IBUFSIZE]; 295 rc->rc_hiwat = &rc->rc_ibuf[RC_IHIGHWATER]; 296 rc->rc_optr = rc->rc_obufend = rc->rc_obuf; 297 callout_init(&rc->rc_dtrcallout, 0); 298 tp = rc->rc_tp = ttyalloc(); 299 tp->t_sc = rc; 300 tp->t_oproc = rc_start; 301 tp->t_param = rc_param; 302 tp->t_modem = rc_modem; 303 tp->t_break = rc_break; 304 tp->t_close = rc_close; 305 tp->t_stop = rc_stop; 306 ttycreate(tp, TS_CALLOUT, "m%d", chan + base); 307 } 308 309 error = bus_setup_intr(dev, sc->sc_irq, INTR_TYPE_TTY, NULL, rc_intr, 310 sc, &sc->sc_hwicookie); 311 if (error) { 312 device_printf(dev, "failed to register interrupt handler\n"); 313 goto fail; 314 } 315 316 swi_add(&tty_intr_event, "rc", rc_pollcard, sc, SWI_TTY, 0, 317 &sc->sc_swicookie); 318 return (0); 319 320fail: 321 rc_release_resources(dev); 322 return (error); 323} 324 325static int 326rc_detach(device_t dev) 327{ 328 struct rc_softc *sc; 329 struct rc_chans *rc; 330 int error, i; 331 332 sc = device_get_softc(dev); 333 334 rc = sc->sc_channels; 335 for (i = 0; i < CD180_NCHAN; i++, rc++) 336 ttyfree(rc->rc_tp); 337 338 error = bus_teardown_intr(dev, sc->sc_irq, sc->sc_hwicookie); 339 if (error) 340 device_printf(dev, "failed to deregister interrupt handler\n"); 341 swi_remove(sc->sc_swicookie); 342 rc_release_resources(dev); 343 344 return (0); 345} 346 347static void 348rc_release_resources(device_t dev) 349{ 350 struct rc_softc *sc; 351 int i; 352 353 sc = device_get_softc(dev); 354 if (sc->sc_irq != NULL) { 355 bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irqrid, 356 sc->sc_irq); 357 sc->sc_irq = NULL; 358 } 359 for (i = 0; i < IOBASE_ADDRS; i++) { 360 if (sc->sc_port[i] == NULL) 361 break; 362 bus_release_resource(dev, SYS_RES_IOPORT, i, sc->sc_port[i]); 363 sc->sc_port[i] = NULL; 364 } 365} 366 367/* RC interrupt handling */ 368static void 369rc_intr(void *arg) 370{ 371 struct rc_softc *sc; 372 struct rc_chans *rc; 373 int resid, chan; 374 u_char val, iack, bsr, ucnt, *optr; 375 int good_data, t_state; 376 377 sc = (struct rc_softc *)arg; 378 bsr = ~(rcin(sc, RC_BSR)); 379 if (!(bsr & (RC_BSR_TOUT|RC_BSR_RXINT|RC_BSR_TXINT|RC_BSR_MOINT))) { 380 device_printf(sc->sc_dev, "extra interrupt\n"); 381 rcout(sc, CD180_EOIR, 0); 382 return; 383 } 384 385 while (bsr & (RC_BSR_TOUT|RC_BSR_RXINT|RC_BSR_TXINT|RC_BSR_MOINT)) { 386#ifdef RCDEBUG_DETAILED 387 device_printf(sc->sc_dev, "intr (%p) %s%s%s%s\n", arg, bsr, 388 (bsr & RC_BSR_TOUT)?"TOUT ":"", 389 (bsr & RC_BSR_RXINT)?"RXINT ":"", 390 (bsr & RC_BSR_TXINT)?"TXINT ":"", 391 (bsr & RC_BSR_MOINT)?"MOINT":""); 392#endif 393 if (bsr & RC_BSR_TOUT) { 394 device_printf(sc->sc_dev, 395 "hardware failure, reset board\n"); 396 rcout(sc, RC_CTOUT, 0); 397 rc_reinit(sc); 398 return; 399 } 400 if (bsr & RC_BSR_RXINT) { 401 iack = rcin(sc, RC_PILR_RX); 402 good_data = (iack == (GIVR_IT_RGDI | RC_FAKEID)); 403 if (!good_data && iack != (GIVR_IT_REI | RC_FAKEID)) { 404 device_printf(sc->sc_dev, 405 "fake rxint: %02x\n", iack); 406 goto more_intrs; 407 } 408 chan = ((rcin(sc, CD180_GICR) & GICR_CHAN) >> GICR_LSH); 409 rc = &sc->sc_channels[chan]; 410 t_state = rc->rc_tp->t_state; 411 /* Do RTS flow control stuff */ 412 if ( (rc->rc_flags & RC_RTSFLOW) 413 || !(t_state & TS_ISOPEN) 414 ) { 415 if ( ( !(t_state & TS_ISOPEN) 416 || (t_state & TS_TBLOCK) 417 ) 418 && (rc->rc_msvr & MSVR_RTS) 419 ) 420 rcout(sc, CD180_MSVR, 421 rc->rc_msvr &= ~MSVR_RTS); 422 else if (!(rc->rc_msvr & MSVR_RTS)) 423 rcout(sc, CD180_MSVR, 424 rc->rc_msvr |= MSVR_RTS); 425 } 426 ucnt = rcin(sc, CD180_RDCR) & 0xF; 427 resid = 0; 428 429 if (t_state & TS_ISOPEN) { 430 /* check for input buffer overflow */ 431 if ((rc->rc_iptr + ucnt) >= rc->rc_bufend) { 432 resid = ucnt; 433 ucnt = rc->rc_bufend - rc->rc_iptr; 434 resid -= ucnt; 435 if (!(rc->rc_flags & RC_WAS_BUFOVFL)) { 436 rc->rc_flags |= RC_WAS_BUFOVFL; 437 sc->sc_scheduled_event++; 438 } 439 } 440 optr = rc->rc_iptr; 441 /* check foor good data */ 442 if (good_data) { 443 while (ucnt-- > 0) { 444 val = rcin(sc, CD180_RDR); 445 optr[0] = val; 446 optr[INPUT_FLAGS_SHIFT] = 0; 447 optr++; 448 sc->sc_scheduled_event++; 449 if (val != 0 && val == rc->rc_tp->t_hotchar) 450 swi_sched(sc->sc_swicookie, 0); 451 } 452 } else { 453 /* Store also status data */ 454 while (ucnt-- > 0) { 455 iack = rcin(sc, CD180_RCSR); 456 if (iack & RCSR_Timeout) 457 break; 458 if ( (iack & RCSR_OE) 459 && !(rc->rc_flags & RC_WAS_SILOVFL)) { 460 rc->rc_flags |= RC_WAS_SILOVFL; 461 sc->sc_scheduled_event++; 462 } 463 val = rcin(sc, CD180_RDR); 464 /* 465 Don't store PE if IGNPAR and BREAK if IGNBRK, 466 this hack allows "raw" tty optimization 467 works even if IGN* is set. 468 */ 469 if ( !(iack & (RCSR_PE|RCSR_FE|RCSR_Break)) 470 || ((!(iack & (RCSR_PE|RCSR_FE)) 471 || !(rc->rc_tp->t_iflag & IGNPAR)) 472 && (!(iack & RCSR_Break) 473 || !(rc->rc_tp->t_iflag & IGNBRK)))) { 474 if ( (iack & (RCSR_PE|RCSR_FE)) 475 && (t_state & TS_CAN_BYPASS_L_RINT) 476 && ((iack & RCSR_FE) 477 || ((iack & RCSR_PE) 478 && (rc->rc_tp->t_iflag & INPCK)))) 479 val = 0; 480 else if (val != 0 && val == rc->rc_tp->t_hotchar) 481 swi_sched(sc->sc_swicookie, 0); 482 optr[0] = val; 483 optr[INPUT_FLAGS_SHIFT] = iack; 484 optr++; 485 sc->sc_scheduled_event++; 486 } 487 } 488 } 489 rc->rc_iptr = optr; 490 rc->rc_flags |= RC_DORXFER; 491 } else 492 resid = ucnt; 493 /* Clear FIFO if necessary */ 494 while (resid-- > 0) { 495 if (!good_data) 496 iack = rcin(sc, CD180_RCSR); 497 else 498 iack = 0; 499 if (iack & RCSR_Timeout) 500 break; 501 (void) rcin(sc, CD180_RDR); 502 } 503 goto more_intrs; 504 } 505 if (bsr & RC_BSR_MOINT) { 506 iack = rcin(sc, RC_PILR_MODEM); 507 if (iack != (GIVR_IT_MSCI | RC_FAKEID)) { 508 device_printf(sc->sc_dev, "fake moint: %02x\n", 509 iack); 510 goto more_intrs; 511 } 512 chan = ((rcin(sc, CD180_GICR) & GICR_CHAN) >> GICR_LSH); 513 rc = &sc->sc_channels[chan]; 514 iack = rcin(sc, CD180_MCR); 515 rc->rc_msvr = rcin(sc, CD180_MSVR); 516 rcout(sc, CD180_MCR, 0); 517#ifdef RCDEBUG 518 printrcflags(rc, "moint"); 519#endif 520 if (rc->rc_flags & RC_CTSFLOW) { 521 if (rc->rc_msvr & MSVR_CTS) 522 rc->rc_flags |= RC_SEND_RDY; 523 else 524 rc->rc_flags &= ~RC_SEND_RDY; 525 } else 526 rc->rc_flags |= RC_SEND_RDY; 527 if ((iack & MCR_CDchg) && !(rc->rc_flags & RC_MODCHG)) { 528 sc->sc_scheduled_event += LOTS_OF_EVENTS; 529 rc->rc_flags |= RC_MODCHG; 530 swi_sched(sc->sc_swicookie, 0); 531 } 532 goto more_intrs; 533 } 534 if (bsr & RC_BSR_TXINT) { 535 iack = rcin(sc, RC_PILR_TX); 536 if (iack != (GIVR_IT_TDI | RC_FAKEID)) { 537 device_printf(sc->sc_dev, "fake txint: %02x\n", 538 iack); 539 goto more_intrs; 540 } 541 chan = ((rcin(sc, CD180_GICR) & GICR_CHAN) >> GICR_LSH); 542 rc = &sc->sc_channels[chan]; 543 if ( (rc->rc_flags & RC_OSUSP) 544 || !(rc->rc_flags & RC_SEND_RDY) 545 ) 546 goto more_intrs; 547 /* Handle breaks and other stuff */ 548 if (rc->rc_pendcmd) { 549 rcout(sc, CD180_COR2, rc->rc_cor2 |= COR2_ETC); 550 rcout(sc, CD180_TDR, CD180_C_ESC); 551 rcout(sc, CD180_TDR, rc->rc_pendcmd); 552 rcout(sc, CD180_COR2, rc->rc_cor2 &= ~COR2_ETC); 553 rc->rc_pendcmd = 0; 554 goto more_intrs; 555 } 556 optr = rc->rc_optr; 557 resid = rc->rc_obufend - optr; 558 if (resid > CD180_NFIFO) 559 resid = CD180_NFIFO; 560 while (resid-- > 0) 561 rcout(sc, CD180_TDR, *optr++); 562 rc->rc_optr = optr; 563 564 /* output completed? */ 565 if (optr >= rc->rc_obufend) { 566 rcout(sc, CD180_IER, rc->rc_ier &= ~IER_TxRdy); 567#ifdef RCDEBUG 568 device_printf(sc->sc_dev, 569 "channel %d: output completed\n", 570 rc->rc_chan); 571#endif 572 if (!(rc->rc_flags & RC_DOXXFER)) { 573 sc->sc_scheduled_event += LOTS_OF_EVENTS; 574 rc->rc_flags |= RC_DOXXFER; 575 swi_sched(sc->sc_swicookie, 0); 576 } 577 } 578 } 579 more_intrs: 580 rcout(sc, CD180_EOIR, 0); /* end of interrupt */ 581 rcout(sc, RC_CTOUT, 0); 582 bsr = ~(rcin(sc, RC_BSR)); 583 } 584} 585 586/* Feed characters to output buffer */ 587static void 588rc_start(struct tty *tp) 589{ 590 struct rc_softc *sc; 591 struct rc_chans *rc; 592 int s; 593 594 rc = tp->t_sc; 595 if (rc->rc_flags & RC_OSBUSY) 596 return; 597 sc = rc->rc_rcb; 598 s = spltty(); 599 rc->rc_flags |= RC_OSBUSY; 600 critical_enter(); 601 if (tp->t_state & TS_TTSTOP) 602 rc->rc_flags |= RC_OSUSP; 603 else 604 rc->rc_flags &= ~RC_OSUSP; 605 /* Do RTS flow control stuff */ 606 if ( (rc->rc_flags & RC_RTSFLOW) 607 && (tp->t_state & TS_TBLOCK) 608 && (rc->rc_msvr & MSVR_RTS) 609 ) { 610 rcout(sc, CD180_CAR, rc->rc_chan); 611 rcout(sc, CD180_MSVR, rc->rc_msvr &= ~MSVR_RTS); 612 } else if (!(rc->rc_msvr & MSVR_RTS)) { 613 rcout(sc, CD180_CAR, rc->rc_chan); 614 rcout(sc, CD180_MSVR, rc->rc_msvr |= MSVR_RTS); 615 } 616 critical_exit(); 617 if (tp->t_state & (TS_TIMEOUT|TS_TTSTOP)) 618 goto out; 619#ifdef RCDEBUG 620 printrcflags(rc, "rcstart"); 621#endif 622 ttwwakeup(tp); 623#ifdef RCDEBUG 624 printf("rcstart: outq = %d obuf = %d\n", 625 tp->t_outq.c_cc, rc->rc_obufend - rc->rc_optr); 626#endif 627 if (tp->t_state & TS_BUSY) 628 goto out; /* output still in progress ... */ 629 630 if (tp->t_outq.c_cc > 0) { 631 u_int ocnt; 632 633 tp->t_state |= TS_BUSY; 634 ocnt = q_to_b(&tp->t_outq, rc->rc_obuf, sizeof rc->rc_obuf); 635 critical_enter(); 636 rc->rc_optr = rc->rc_obuf; 637 rc->rc_obufend = rc->rc_optr + ocnt; 638 critical_exit(); 639 if (!(rc->rc_ier & IER_TxRdy)) { 640#ifdef RCDEBUG 641 device_printf(sc->sc_dev, 642 "channel %d: rcstart enable txint\n", rc->rc_chan); 643#endif 644 rcout(sc, CD180_CAR, rc->rc_chan); 645 rcout(sc, CD180_IER, rc->rc_ier |= IER_TxRdy); 646 } 647 } 648out: 649 rc->rc_flags &= ~RC_OSBUSY; 650 (void) splx(s); 651} 652 653/* Handle delayed events. */ 654void 655rc_pollcard(void *arg) 656{ 657 struct rc_softc *sc; 658 struct rc_chans *rc; 659 struct tty *tp; 660 u_char *tptr, *eptr; 661 int chan, icnt; 662 663 sc = (struct rc_softc *)arg; 664 if (sc->sc_scheduled_event == 0) 665 return; 666 do { 667 rc = sc->sc_channels; 668 for (chan = 0; chan < CD180_NCHAN; rc++, chan++) { 669 tp = rc->rc_tp; 670#ifdef RCDEBUG 671 if (rc->rc_flags & (RC_DORXFER|RC_DOXXFER|RC_MODCHG| 672 RC_WAS_BUFOVFL|RC_WAS_SILOVFL)) 673 printrcflags(rc, "rcevent"); 674#endif 675 if (rc->rc_flags & RC_WAS_BUFOVFL) { 676 critical_enter(); 677 rc->rc_flags &= ~RC_WAS_BUFOVFL; 678 sc->sc_scheduled_event--; 679 critical_exit(); 680 device_printf(sc->sc_dev, 681 "channel %d: interrupt-level buffer overflow\n", 682 chan); 683 } 684 if (rc->rc_flags & RC_WAS_SILOVFL) { 685 critical_enter(); 686 rc->rc_flags &= ~RC_WAS_SILOVFL; 687 sc->sc_scheduled_event--; 688 critical_exit(); 689 device_printf(sc->sc_dev, 690 "channel %d: silo overflow\n", chan); 691 } 692 if (rc->rc_flags & RC_MODCHG) { 693 critical_enter(); 694 rc->rc_flags &= ~RC_MODCHG; 695 sc->sc_scheduled_event -= LOTS_OF_EVENTS; 696 critical_exit(); 697 ttyld_modem(tp, !!(rc->rc_msvr & MSVR_CD)); 698 } 699 if (rc->rc_flags & RC_DORXFER) { 700 critical_enter(); 701 rc->rc_flags &= ~RC_DORXFER; 702 eptr = rc->rc_iptr; 703 if (rc->rc_bufend == &rc->rc_ibuf[2 * RC_IBUFSIZE]) 704 tptr = &rc->rc_ibuf[RC_IBUFSIZE]; 705 else 706 tptr = rc->rc_ibuf; 707 icnt = eptr - tptr; 708 if (icnt > 0) { 709 if (rc->rc_bufend == &rc->rc_ibuf[2 * RC_IBUFSIZE]) { 710 rc->rc_iptr = rc->rc_ibuf; 711 rc->rc_bufend = &rc->rc_ibuf[RC_IBUFSIZE]; 712 rc->rc_hiwat = &rc->rc_ibuf[RC_IHIGHWATER]; 713 } else { 714 rc->rc_iptr = &rc->rc_ibuf[RC_IBUFSIZE]; 715 rc->rc_bufend = &rc->rc_ibuf[2 * RC_IBUFSIZE]; 716 rc->rc_hiwat = 717 &rc->rc_ibuf[RC_IBUFSIZE + RC_IHIGHWATER]; 718 } 719 if ( (rc->rc_flags & RC_RTSFLOW) 720 && (tp->t_state & TS_ISOPEN) 721 && !(tp->t_state & TS_TBLOCK) 722 && !(rc->rc_msvr & MSVR_RTS) 723 ) { 724 rcout(sc, CD180_CAR, chan); 725 rcout(sc, CD180_MSVR, 726 rc->rc_msvr |= MSVR_RTS); 727 } 728 sc->sc_scheduled_event -= icnt; 729 } 730 critical_exit(); 731 732 if (icnt <= 0 || !(tp->t_state & TS_ISOPEN)) 733 goto done1; 734 735 if ( (tp->t_state & TS_CAN_BYPASS_L_RINT) 736 && !(tp->t_state & TS_LOCAL)) { 737 if ((tp->t_rawq.c_cc + icnt) >= RB_I_HIGH_WATER 738 && ((rc->rc_flags & RC_RTSFLOW) || (tp->t_iflag & IXOFF)) 739 && !(tp->t_state & TS_TBLOCK)) 740 ttyblock(tp); 741 tk_nin += icnt; 742 tk_rawcc += icnt; 743 tp->t_rawcc += icnt; 744 if (b_to_q(tptr, icnt, &tp->t_rawq)) 745 device_printf(sc->sc_dev, 746 "channel %d: tty-level buffer overflow\n", 747 chan); 748 ttwakeup(tp); 749 if ((tp->t_state & TS_TTSTOP) && ((tp->t_iflag & IXANY) 750 || (tp->t_cc[VSTART] == tp->t_cc[VSTOP]))) { 751 tp->t_state &= ~TS_TTSTOP; 752 tp->t_lflag &= ~FLUSHO; 753 rc_start(tp); 754 } 755 } else { 756 for (; tptr < eptr; tptr++) 757 ttyld_rint(tp, 758 (tptr[0] | 759 rc_rcsrt[tptr[INPUT_FLAGS_SHIFT] & 0xF])); 760 } 761done1: ; 762 } 763 if (rc->rc_flags & RC_DOXXFER) { 764 critical_enter(); 765 sc->sc_scheduled_event -= LOTS_OF_EVENTS; 766 rc->rc_flags &= ~RC_DOXXFER; 767 rc->rc_tp->t_state &= ~TS_BUSY; 768 critical_exit(); 769 ttyld_start(tp); 770 } 771 if (sc->sc_scheduled_event == 0) 772 break; 773 } 774 } while (sc->sc_scheduled_event >= LOTS_OF_EVENTS); 775} 776 777static void 778rc_stop(struct tty *tp, int rw) 779{ 780 struct rc_softc *sc; 781 struct rc_chans *rc; 782 u_char *tptr, *eptr; 783 784 rc = tp->t_sc; 785 sc = rc->rc_rcb; 786#ifdef RCDEBUG 787 device_printf(sc->sc_dev, "channel %d: rc_stop %s%s\n", 788 rc->rc_chan, (rw & FWRITE)?"FWRITE ":"", (rw & FREAD)?"FREAD":""); 789#endif 790 if (rw & FWRITE) 791 rc_discard_output(rc); 792 critical_enter(); 793 if (rw & FREAD) { 794 rc->rc_flags &= ~RC_DORXFER; 795 eptr = rc->rc_iptr; 796 if (rc->rc_bufend == &rc->rc_ibuf[2 * RC_IBUFSIZE]) { 797 tptr = &rc->rc_ibuf[RC_IBUFSIZE]; 798 rc->rc_iptr = &rc->rc_ibuf[RC_IBUFSIZE]; 799 } else { 800 tptr = rc->rc_ibuf; 801 rc->rc_iptr = rc->rc_ibuf; 802 } 803 sc->sc_scheduled_event -= eptr - tptr; 804 } 805 if (tp->t_state & TS_TTSTOP) 806 rc->rc_flags |= RC_OSUSP; 807 else 808 rc->rc_flags &= ~RC_OSUSP; 809 critical_exit(); 810} 811 812static void 813rc_close(struct tty *tp) 814{ 815 struct rc_chans *rc; 816 struct rc_softc *sc; 817 int s; 818 819 rc = tp->t_sc; 820 sc = rc->rc_rcb; 821 s = spltty(); 822 rcout(sc, CD180_CAR, rc->rc_chan); 823 824 /* Disable rx/tx intrs */ 825 rcout(sc, CD180_IER, rc->rc_ier = 0); 826 if ( (tp->t_cflag & HUPCL) 827 || (!(rc->rc_flags & RC_ACTOUT) 828 && !(rc->rc_msvr & MSVR_CD) 829 && !(tp->t_cflag & CLOCAL)) 830 || !(tp->t_state & TS_ISOPEN) 831 ) { 832 CCRCMD(sc, rc->rc_chan, CCR_ResetChan); 833 WAITFORCCR(sc, rc->rc_chan); 834 (void) rc_modem(tp, SER_RTS, 0); 835 ttydtrwaitstart(tp); 836 } 837 rc->rc_flags &= ~RC_ACTOUT; 838 wakeup( &rc->rc_rcb); /* wake bi */ 839 wakeup(TSA_CARR_ON(tp)); 840 (void) splx(s); 841} 842 843/* Reset the bastard */ 844static void 845rc_hwreset(struct rc_softc *sc, u_int chipid) 846{ 847 CCRCMD(sc, -1, CCR_HWRESET); /* Hardware reset */ 848 DELAY(20000); 849 WAITFORCCR(sc, -1); 850 851 rcout(sc, RC_CTOUT, 0); /* Clear timeout */ 852 rcout(sc, CD180_GIVR, chipid); 853 rcout(sc, CD180_GICR, 0); 854 855 /* Set Prescaler Registers (1 msec) */ 856 rcout(sc, CD180_PPRL, ((RC_OSCFREQ + 999) / 1000) & 0xFF); 857 rcout(sc, CD180_PPRH, ((RC_OSCFREQ + 999) / 1000) >> 8); 858 859 /* Initialize Priority Interrupt Level Registers */ 860 rcout(sc, CD180_PILR1, RC_PILR_MODEM); 861 rcout(sc, CD180_PILR2, RC_PILR_TX); 862 rcout(sc, CD180_PILR3, RC_PILR_RX); 863 864 /* Reset DTR */ 865 rcout(sc, RC_DTREG, ~0); 866} 867 868/* Set channel parameters */ 869static int 870rc_param(struct tty *tp, struct termios *ts) 871{ 872 struct rc_softc *sc; 873 struct rc_chans *rc; 874 int idivs, odivs, s, val, cflag, iflag, lflag, inpflow; 875 876 if ( ts->c_ospeed < 0 || ts->c_ospeed > 76800 877 || ts->c_ispeed < 0 || ts->c_ispeed > 76800 878 ) 879 return (EINVAL); 880 if (ts->c_ispeed == 0) 881 ts->c_ispeed = ts->c_ospeed; 882 odivs = RC_BRD(ts->c_ospeed); 883 idivs = RC_BRD(ts->c_ispeed); 884 885 rc = tp->t_sc; 886 sc = rc->rc_rcb; 887 s = spltty(); 888 889 /* Select channel */ 890 rcout(sc, CD180_CAR, rc->rc_chan); 891 892 /* If speed == 0, hangup line */ 893 if (ts->c_ospeed == 0) { 894 CCRCMD(sc, rc->rc_chan, CCR_ResetChan); 895 WAITFORCCR(sc, rc->rc_chan); 896 (void) rc_modem(tp, 0, SER_DTR); 897 } 898 899 tp->t_state &= ~TS_CAN_BYPASS_L_RINT; 900 cflag = ts->c_cflag; 901 iflag = ts->c_iflag; 902 lflag = ts->c_lflag; 903 904 if (idivs > 0) { 905 rcout(sc, CD180_RBPRL, idivs & 0xFF); 906 rcout(sc, CD180_RBPRH, idivs >> 8); 907 } 908 if (odivs > 0) { 909 rcout(sc, CD180_TBPRL, odivs & 0xFF); 910 rcout(sc, CD180_TBPRH, odivs >> 8); 911 } 912 913 /* set timeout value */ 914 if (ts->c_ispeed > 0) { 915 int itm = ts->c_ispeed > 2400 ? 5 : 10000 / ts->c_ispeed + 1; 916 917 if ( !(lflag & ICANON) 918 && ts->c_cc[VMIN] != 0 && ts->c_cc[VTIME] != 0 919 && ts->c_cc[VTIME] * 10 > itm) 920 itm = ts->c_cc[VTIME] * 10; 921 922 rcout(sc, CD180_RTPR, itm <= 255 ? itm : 255); 923 } 924 925 switch (cflag & CSIZE) { 926 case CS5: val = COR1_5BITS; break; 927 case CS6: val = COR1_6BITS; break; 928 case CS7: val = COR1_7BITS; break; 929 default: 930 case CS8: val = COR1_8BITS; break; 931 } 932 if (cflag & PARENB) { 933 val |= COR1_NORMPAR; 934 if (cflag & PARODD) 935 val |= COR1_ODDP; 936 if (!(cflag & INPCK)) 937 val |= COR1_Ignore; 938 } else 939 val |= COR1_Ignore; 940 if (cflag & CSTOPB) 941 val |= COR1_2SB; 942 rcout(sc, CD180_COR1, val); 943 944 /* Set FIFO threshold */ 945 val = ts->c_ospeed <= 4800 ? 1 : CD180_NFIFO / 2; 946 inpflow = 0; 947 if ( (iflag & IXOFF) 948 && ( ts->c_cc[VSTOP] != _POSIX_VDISABLE 949 && ( ts->c_cc[VSTART] != _POSIX_VDISABLE 950 || (iflag & IXANY) 951 ) 952 ) 953 ) { 954 inpflow = 1; 955 val |= COR3_SCDE|COR3_FCT; 956 } 957 rcout(sc, CD180_COR3, val); 958 959 /* Initialize on-chip automatic flow control */ 960 val = 0; 961 rc->rc_flags &= ~(RC_CTSFLOW|RC_SEND_RDY); 962 if (cflag & CCTS_OFLOW) { 963 rc->rc_flags |= RC_CTSFLOW; 964 val |= COR2_CtsAE; 965 } else 966 rc->rc_flags |= RC_SEND_RDY; 967 if (tp->t_state & TS_TTSTOP) 968 rc->rc_flags |= RC_OSUSP; 969 else 970 rc->rc_flags &= ~RC_OSUSP; 971 if (cflag & CRTS_IFLOW) 972 rc->rc_flags |= RC_RTSFLOW; 973 else 974 rc->rc_flags &= ~RC_RTSFLOW; 975 976 if (inpflow) { 977 if (ts->c_cc[VSTART] != _POSIX_VDISABLE) 978 rcout(sc, CD180_SCHR1, ts->c_cc[VSTART]); 979 rcout(sc, CD180_SCHR2, ts->c_cc[VSTOP]); 980 val |= COR2_TxIBE; 981 if (iflag & IXANY) 982 val |= COR2_IXM; 983 } 984 985 rcout(sc, CD180_COR2, rc->rc_cor2 = val); 986 987 CCRCMD(sc, rc->rc_chan, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3); 988 989 ttyldoptim(tp); 990 991 /* modem ctl */ 992 val = cflag & CLOCAL ? 0 : MCOR1_CDzd; 993 if (cflag & CCTS_OFLOW) 994 val |= MCOR1_CTSzd; 995 rcout(sc, CD180_MCOR1, val); 996 997 val = cflag & CLOCAL ? 0 : MCOR2_CDod; 998 if (cflag & CCTS_OFLOW) 999 val |= MCOR2_CTSod; 1000 rcout(sc, CD180_MCOR2, val); 1001 1002 /* enable i/o and interrupts */ 1003 CCRCMD(sc, rc->rc_chan, 1004 CCR_XMTREN | ((cflag & CREAD) ? CCR_RCVREN : CCR_RCVRDIS)); 1005 WAITFORCCR(sc, rc->rc_chan); 1006 1007 rc->rc_ier = cflag & CLOCAL ? 0 : IER_CD; 1008 if (cflag & CCTS_OFLOW) 1009 rc->rc_ier |= IER_CTS; 1010 if (cflag & CREAD) 1011 rc->rc_ier |= IER_RxData; 1012 if (tp->t_state & TS_BUSY) 1013 rc->rc_ier |= IER_TxRdy; 1014 if (ts->c_ospeed != 0) 1015 rc_modem(tp, SER_DTR, 0); 1016 if ((cflag & CCTS_OFLOW) && (rc->rc_msvr & MSVR_CTS)) 1017 rc->rc_flags |= RC_SEND_RDY; 1018 rcout(sc, CD180_IER, rc->rc_ier); 1019 (void) splx(s); 1020 return 0; 1021} 1022 1023/* Re-initialize board after bogus interrupts */ 1024static void 1025rc_reinit(struct rc_softc *sc) 1026{ 1027 struct rc_chans *rc; 1028 int i; 1029 1030 rc_hwreset(sc, RC_FAKEID); 1031 rc = sc->sc_channels; 1032 for (i = 0; i < CD180_NCHAN; i++, rc++) 1033 (void) rc_param(rc->rc_tp, &rc->rc_tp->t_termios); 1034} 1035 1036/* Modem control routines */ 1037 1038static int 1039rc_modem(struct tty *tp, int biton, int bitoff) 1040{ 1041 struct rc_chans *rc; 1042 struct rc_softc *sc; 1043 u_char *dtr; 1044 u_char msvr; 1045 1046 rc = tp->t_sc; 1047 sc = rc->rc_rcb; 1048 dtr = &sc->sc_dtr; 1049 rcout(sc, CD180_CAR, rc->rc_chan); 1050 1051 if (biton == 0 && bitoff == 0) { 1052 msvr = rc->rc_msvr = rcin(sc, CD180_MSVR); 1053 1054 if (msvr & MSVR_RTS) 1055 biton |= SER_RTS; 1056 if (msvr & MSVR_CTS) 1057 biton |= SER_CTS; 1058 if (msvr & MSVR_DSR) 1059 biton |= SER_DSR; 1060 if (msvr & MSVR_DTR) 1061 biton |= SER_DTR; 1062 if (msvr & MSVR_CD) 1063 biton |= SER_DCD; 1064 if (~rcin(sc, RC_RIREG) & (1 << rc->rc_chan)) 1065 biton |= SER_RI; 1066 return biton; 1067 } 1068 if (biton & SER_DTR) 1069 rcout(sc, RC_DTREG, ~(*dtr |= 1 << rc->rc_chan)); 1070 if (bitoff & SER_DTR) 1071 rcout(sc, RC_DTREG, ~(*dtr &= ~(1 << rc->rc_chan))); 1072 msvr = rcin(sc, CD180_MSVR); 1073 if (biton & SER_DTR) 1074 msvr |= MSVR_DTR; 1075 if (bitoff & SER_DTR) 1076 msvr &= ~MSVR_DTR; 1077 if (biton & SER_RTS) 1078 msvr |= MSVR_RTS; 1079 if (bitoff & SER_RTS) 1080 msvr &= ~MSVR_RTS; 1081 rcout(sc, CD180_MSVR, msvr); 1082 return 0; 1083} 1084 1085static void 1086rc_break(struct tty *tp, int brk) 1087{ 1088 struct rc_chans *rc; 1089 1090 rc = tp->t_sc; 1091 1092 if (brk) 1093 rc->rc_pendcmd = CD180_C_SBRK; 1094 else 1095 rc->rc_pendcmd = CD180_C_EBRK; 1096} 1097 1098#define ERR(s) do { \ 1099 device_printf(sc->sc_dev, "%s", ""); \ 1100 printf s ; \ 1101 printf("\n"); \ 1102 (void) splx(old_level); \ 1103 return 1; \ 1104} while (0) 1105 1106/* Test the board. */ 1107int 1108rc_test(struct rc_softc *sc) 1109{ 1110 int chan = 0; 1111 int i = 0, rcnt, old_level; 1112 unsigned int iack, chipid; 1113 unsigned short divs; 1114 static u_char ctest[] = "\377\125\252\045\244\0\377"; 1115#define CTLEN 8 1116 1117 struct rtest { 1118 u_char txbuf[CD180_NFIFO]; /* TX buffer */ 1119 u_char rxbuf[CD180_NFIFO]; /* RX buffer */ 1120 int rxptr; /* RX pointer */ 1121 int txptr; /* TX pointer */ 1122 } tchans[CD180_NCHAN]; 1123 1124 old_level = spltty(); 1125 1126 chipid = RC_FAKEID; 1127 1128 /* First, reset board to initial state */ 1129 rc_hwreset(sc, chipid); 1130 1131 divs = RC_BRD(19200); 1132 1133 /* Initialize channels */ 1134 for (chan = 0; chan < CD180_NCHAN; chan++) { 1135 1136 /* Select and reset channel */ 1137 rcout(sc, CD180_CAR, chan); 1138 CCRCMD(sc, chan, CCR_ResetChan); 1139 WAITFORCCR(sc, chan); 1140 1141 /* Set speed */ 1142 rcout(sc, CD180_RBPRL, divs & 0xFF); 1143 rcout(sc, CD180_RBPRH, divs >> 8); 1144 rcout(sc, CD180_TBPRL, divs & 0xFF); 1145 rcout(sc, CD180_TBPRH, divs >> 8); 1146 1147 /* set timeout value */ 1148 rcout(sc, CD180_RTPR, 0); 1149 1150 /* Establish local loopback */ 1151 rcout(sc, CD180_COR1, COR1_NOPAR | COR1_8BITS | COR1_1SB); 1152 rcout(sc, CD180_COR2, COR2_LLM); 1153 rcout(sc, CD180_COR3, CD180_NFIFO); 1154 CCRCMD(sc, chan, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3); 1155 CCRCMD(sc, chan, CCR_RCVREN | CCR_XMTREN); 1156 WAITFORCCR(sc, chan); 1157 rcout(sc, CD180_MSVR, MSVR_RTS); 1158 1159 /* Fill TXBUF with test data */ 1160 for (i = 0; i < CD180_NFIFO; i++) { 1161 tchans[chan].txbuf[i] = ctest[i]; 1162 tchans[chan].rxbuf[i] = 0; 1163 } 1164 tchans[chan].txptr = tchans[chan].rxptr = 0; 1165 1166 /* Now, start transmit */ 1167 rcout(sc, CD180_IER, IER_TxMpty|IER_RxData); 1168 } 1169 /* Pseudo-interrupt poll stuff */ 1170 for (rcnt = 10000; rcnt-- > 0; rcnt--) { 1171 i = ~(rcin(sc, RC_BSR)); 1172 if (i & RC_BSR_TOUT) 1173 ERR(("BSR timeout bit set\n")); 1174 else if (i & RC_BSR_TXINT) { 1175 iack = rcin(sc, RC_PILR_TX); 1176 if (iack != (GIVR_IT_TDI | chipid)) 1177 ERR(("Bad TX intr ack (%02x != %02x)\n", 1178 iack, GIVR_IT_TDI | chipid)); 1179 chan = (rcin(sc, CD180_GICR) & GICR_CHAN) >> GICR_LSH; 1180 /* If no more data to transmit, disable TX intr */ 1181 if (tchans[chan].txptr >= CD180_NFIFO) { 1182 iack = rcin(sc, CD180_IER); 1183 rcout(sc, CD180_IER, iack & ~IER_TxMpty); 1184 } else { 1185 for (iack = tchans[chan].txptr; 1186 iack < CD180_NFIFO; iack++) 1187 rcout(sc, CD180_TDR, 1188 tchans[chan].txbuf[iack]); 1189 tchans[chan].txptr = iack; 1190 } 1191 rcout(sc, CD180_EOIR, 0); 1192 } else if (i & RC_BSR_RXINT) { 1193 u_char ucnt; 1194 1195 iack = rcin(sc, RC_PILR_RX); 1196 if (iack != (GIVR_IT_RGDI | chipid) && 1197 iack != (GIVR_IT_REI | chipid)) 1198 ERR(("Bad RX intr ack (%02x != %02x)\n", 1199 iack, GIVR_IT_RGDI | chipid)); 1200 chan = (rcin(sc, CD180_GICR) & GICR_CHAN) >> GICR_LSH; 1201 ucnt = rcin(sc, CD180_RDCR) & 0xF; 1202 while (ucnt-- > 0) { 1203 iack = rcin(sc, CD180_RCSR); 1204 if (iack & RCSR_Timeout) 1205 break; 1206 if (iack & 0xF) 1207 ERR(("Bad char chan %d (RCSR = %02X)\n", 1208 chan, iack)); 1209 if (tchans[chan].rxptr > CD180_NFIFO) 1210 ERR(("Got extra chars chan %d\n", 1211 chan)); 1212 tchans[chan].rxbuf[tchans[chan].rxptr++] = 1213 rcin(sc, CD180_RDR); 1214 } 1215 rcout(sc, CD180_EOIR, 0); 1216 } 1217 rcout(sc, RC_CTOUT, 0); 1218 for (iack = chan = 0; chan < CD180_NCHAN; chan++) 1219 if (tchans[chan].rxptr >= CD180_NFIFO) 1220 iack++; 1221 if (iack == CD180_NCHAN) 1222 break; 1223 } 1224 for (chan = 0; chan < CD180_NCHAN; chan++) { 1225 /* Select and reset channel */ 1226 rcout(sc, CD180_CAR, chan); 1227 CCRCMD(sc, chan, CCR_ResetChan); 1228 } 1229 1230 if (!rcnt) 1231 ERR(("looses characters during local loopback\n")); 1232 /* Now, check data */ 1233 for (chan = 0; chan < CD180_NCHAN; chan++) 1234 for (i = 0; i < CD180_NFIFO; i++) 1235 if (ctest[i] != tchans[chan].rxbuf[i]) 1236 ERR(("data mismatch chan %d ptr %d (%d != %d)\n", 1237 chan, i, ctest[i], tchans[chan].rxbuf[i])); 1238 (void) splx(old_level); 1239 return 0; 1240} 1241 1242#ifdef RCDEBUG 1243static void 1244printrcflags(struct rc_chans *rc, char *comment) 1245{ 1246 struct rc_softc *sc; 1247 u_short f = rc->rc_flags; 1248 1249 sc = rc->rc_rcb; 1250 printf("rc%d/%d: %s flags: %s%s%s%s%s%s%s%s%s%s%s%s\n", 1251 rc->rc_rcb->rcb_unit, rc->rc_chan, comment, 1252 (f & RC_DTR_OFF)?"DTR_OFF " :"", 1253 (f & RC_ACTOUT) ?"ACTOUT " :"", 1254 (f & RC_RTSFLOW)?"RTSFLOW " :"", 1255 (f & RC_CTSFLOW)?"CTSFLOW " :"", 1256 (f & RC_DORXFER)?"DORXFER " :"", 1257 (f & RC_DOXXFER)?"DOXXFER " :"", 1258 (f & RC_MODCHG) ?"MODCHG " :"", 1259 (f & RC_OSUSP) ?"OSUSP " :"", 1260 (f & RC_OSBUSY) ?"OSBUSY " :"", 1261 (f & RC_WAS_BUFOVFL) ?"BUFOVFL " :"", 1262 (f & RC_WAS_SILOVFL) ?"SILOVFL " :"", 1263 (f & RC_SEND_RDY) ?"SEND_RDY":""); 1264 1265 rcout(sc, CD180_CAR, rc->rc_chan); 1266 1267 printf("rc%d/%d: msvr %02x ier %02x ccsr %02x\n", 1268 rc->rc_rcb->rcb_unit, rc->rc_chan, 1269 rcin(sc, CD180_MSVR), 1270 rcin(sc, CD180_IER), 1271 rcin(sc, CD180_CCSR)); 1272} 1273#endif /* RCDEBUG */ 1274 1275static void 1276rc_discard_output(struct rc_chans *rc) 1277{ 1278 critical_enter(); 1279 if (rc->rc_flags & RC_DOXXFER) { 1280 rc->rc_rcb->sc_scheduled_event -= LOTS_OF_EVENTS; 1281 rc->rc_flags &= ~RC_DOXXFER; 1282 } 1283 rc->rc_optr = rc->rc_obufend; 1284 rc->rc_tp->t_state &= ~TS_BUSY; 1285 critical_exit(); 1286 ttwwakeup(rc->rc_tp); 1287} 1288 1289static void 1290rc_wait0(struct rc_softc *sc, int chan, int line) 1291{ 1292 int rcnt; 1293 1294 for (rcnt = 50; rcnt && rcin(sc, CD180_CCR); rcnt--) 1295 DELAY(30); 1296 if (rcnt == 0) 1297 device_printf(sc->sc_dev, 1298 "channel %d command timeout, rc.c line: %d\n", chan, line); 1299} 1300 1301static device_method_t rc_methods[] = { 1302 /* Device interface */ 1303 DEVMETHOD(device_probe, rc_probe), 1304 DEVMETHOD(device_attach, rc_attach), 1305 DEVMETHOD(device_detach, rc_detach), 1306 { 0, 0 } 1307}; 1308 1309static driver_t rc_driver = { 1310 "rc", 1311 rc_methods, sizeof(struct rc_softc), 1312}; 1313 1314DRIVER_MODULE(rc, isa, rc_driver, rc_devclass, 0, 0); 1315