ZEDBOARD revision 302915 
1#
2# ZEDBOARD -- Custom configuration for the Xilinx Zynq-7000 based
3#             ZedBoard (www.zedboard.org) and similar Zynq boards.
4#
5# For more information on this file, please read the config(5) manual page,
6# and/or the handbook section on Kernel Configuration Files:
7#
8#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
9#
10# The handbook is also available locally in /usr/share/doc/handbook
11# if you've installed the doc distribution, otherwise always see the
12# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
13# latest information.
14#
15# An exhaustive list of options and more detailed explanations of the
16# device lines is also present in the ../../conf/NOTES and NOTES files.
17# If you are in doubt as to the purpose or necessity of a line, check first
18# in NOTES.
19#
20# $FreeBSD: stable/11/sys/arm/conf/ZEDBOARD 302915 2016-07-15 21:30:19Z ian $
21
22ident		ZEDBOARD
23
24include 	"std.armv6"
25include 	"../xilinx/std.zynq7"
26
27makeoptions	MODULES_EXTRA="dtb/zynq"
28
29options 	SCHED_ULE		# ULE scheduler
30#options 	NFSSD			# Network Filesystem Server
31options 	SMP			# Enable multiple cores
32
33# NFS root from boopt/dhcp
34#options 	BOOTP
35#options 	BOOTP_NFSROOT
36#options 	BOOTP_COMPAT
37#options 	BOOTP_NFSV3
38
39options 	ROOTDEVNAME=\"ufs:mmcsd0s2a\"
40
41# Interrupt controller
42device		gic
43options 	INTRNG
44
45# Cache controller
46device		pl310			# PL310 L2 cache controller
47# ARM MPCore timer
48device		mpcore_timer
49
50device		loop
51device		random
52device		ether
53device		cgem			# Zynq-7000 gig ethernet device
54device		mii
55device		e1000phy
56device		rgephy			# Zybo uses Realtek RTL8211E
57device		pty
58device		uart
59device		gpio
60
61device		md
62device		mmc			# mmc/sd bus
63device		mmcsd			# mmc/sd flash cards
64device		sdhci			# generic sdhci
65device		bpf			# Berkeley packet filter
66
67# USB support
68device		usb
69device		ehci
70device		umass
71device		scbus			# SCSI bus (required for ATA/SCSI)
72device		da			# Direct Access (disks)
73device		axe			# USB-Ethernet
74
75
76# Flattened Device Tree
77options 	FDT			# Configure using FDT/DTB data
78#options 	FDT_DTB_STATIC
79#makeoptions	FDT_DTS_FILE=zedboard.dts
80
81