1/*	$NetBSD: chio.h,v 1.9 1997/09/29 17:32:26 mjacob Exp $	*/
2
3/*-
4 * SPDX-License-Identifier: BSD-4-Clause
5 *
6 * Copyright (c) 1996 Jason R. Thorpe <thorpej@and.com>
7 * All rights reserved.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 *    notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 *    notice, this list of conditions and the following disclaimer in the
16 *    documentation and/or other materials provided with the distribution.
17 * 3. All advertising materials mentioning features or use of this software
18 *    must display the following acknowledgements:
19 *	This product includes software developed by Jason R. Thorpe
20 *	for And Communications, http://www.and.com/
21 * 4. The name of the author may not be used to endorse or promote products
22 *    derived from this software without specific prior written permission.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
25 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
26 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
27 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
28 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
29 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
30 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
31 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
33 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * SUCH DAMAGE.
35 */
36
37#ifndef	_SYS_CHIO_H_
38#define	_SYS_CHIO_H_
39
40#ifndef _KERNEL
41#include <sys/types.h>
42#endif
43#include <sys/ioccom.h>
44
45/*
46 * Element types.  Used as "to" and "from" type indicators in move
47 * and exchange operations.
48 *
49 * Note that code in sys/scsi/ch.c relies on these values (uses them
50 * as offsets in an array, and other evil), so don't muck with them
51 * unless you know what you're doing.
52 */
53#define CHET_MT		0	/* medium transport (picker) */
54#define CHET_ST		1	/* storage transport (slot) */
55#define CHET_IE		2	/* import/export (portal) */
56#define CHET_DT		3	/* data transfer (drive) */
57#define CHET_MAX	CHET_DT
58
59/*
60 * Maximum length of a volume identification string
61 */
62#define CH_VOLTAG_MAXLEN	32
63
64/*
65 * Structure used to execute a MOVE MEDIUM command.
66 */
67struct changer_move {
68	u_int16_t	cm_fromtype;	/* element type to move from */
69	u_int16_t	cm_fromunit;	/* logical unit of from element */
70	u_int16_t	cm_totype;	/* element type to move to */
71	u_int16_t	cm_tounit;	/* logical unit of to element */
72	u_int16_t	cm_flags;	/* misc. flags */
73};
74
75/* cm_flags */
76#define CM_INVERT	0x01	/* invert media */
77
78/*
79 * Structure used to execute an EXCHANGE MEDIUM command.  In an
80 * exchange operation, the following steps occur:
81 *
82 *	- media from source is moved to first destination.
83 *
84 *	- media previously occupying first destination is moved
85 *	  to the second destination.
86 *
87 * The second destination may or may not be the same as the source.
88 * In the case of a simple exchange, the source and second destination
89 * are the same.
90 */
91struct changer_exchange {
92	u_int16_t	ce_srctype;	/* element type of source */
93	u_int16_t	ce_srcunit;	/* logical unit of source */
94	u_int16_t	ce_fdsttype;	/* element type of first destination */
95	u_int16_t	ce_fdstunit;	/* logical unit of first destination */
96	u_int16_t	ce_sdsttype;	/* element type of second destination */
97	u_int16_t	ce_sdstunit;	/* logical unit of second destination */
98	u_int16_t	ce_flags;	/* misc. flags */
99};
100
101/* ce_flags */
102#define CE_INVERT1	0x01	/* invert media 1 */
103#define CE_INVERT2	0x02	/* invert media 2 */
104
105/*
106 * Structure used to execute a POSITION TO ELEMENT command.  This
107 * moves the current picker in front of the specified element.
108 */
109struct changer_position {
110	u_int16_t	cp_type;	/* element type */
111	u_int16_t	cp_unit;	/* logical unit of element */
112	u_int16_t	cp_flags;	/* misc. flags */
113};
114
115/* cp_flags */
116#define CP_INVERT	0x01	/* invert picker */
117
118/*
119 * Data returned by CHIOGPARAMS.
120 */
121struct changer_params {
122	u_int16_t	cp_npickers;	/* number of pickers */
123	u_int16_t	cp_nslots;	/* number of slots */
124	u_int16_t	cp_nportals;	/* number of import/export portals */
125	u_int16_t	cp_ndrives;	/* number of drives */
126};
127
128/*
129 * Command used to get element status.
130 */
131
132struct changer_voltag {
133	u_char		cv_volid[CH_VOLTAG_MAXLEN+1];
134	u_int16_t	cv_serial;
135};
136
137typedef struct changer_voltag changer_voltag_t;
138
139/*
140 * Flags definitions for ces_status
141 * Not all flags have meaning for all element types.
142 */
143typedef enum {
144	CES_STATUS_FULL	  = 0x001,	/* element is full */
145	CES_STATUS_IMPEXP = 0x002,	/* media deposited by operator */
146	CES_STATUS_EXCEPT = 0x004,	/* element in abnormal state */
147	CES_PICKER_MASK	  = 0x005,	/* flags valid for pickers */
148	CES_STATUS_ACCESS = 0x008,	/* media accessible by picker */
149	CES_SLOT_MASK	  = 0x00c,	/* flags valid for slots */
150	CES_DRIVE_MASK	  = 0x00c,	/* flags valid for drives */
151	CES_STATUS_EXENAB = 0x010,	/* element supports exporting */
152	CES_STATUS_INENAB = 0x020,	/* element supports importing */
153	CES_PORTAL_MASK	  = 0x03f,	/* flags valid for portals */
154	CES_INVERT	  = 0x040,	/* invert bit */
155	CES_SOURCE_VALID  = 0x080,	/* source address (ces_source) valid */
156	CES_SCSIID_VALID  = 0x100,	/* ces_scsi_id is valid */
157	CES_LUN_VALID	  = 0x200,	/* ces_scsi_lun is valid */
158	CES_PIV		  = 0x400	/* ces_protocol_id is valid */
159} ces_status_flags;
160
161struct changer_element_status {
162	u_int8_t		ces_type;	  /* element type */
163	u_int16_t		ces_addr;	  /* logical element address */
164	u_int16_t		ces_int_addr;	  /* changer element address */
165	ces_status_flags	ces_flags;	  /*
166						   * see CESTATUS definitions
167						   * below
168						   */
169	u_int8_t		ces_sensecode;	  /*
170						   * additional sense
171						   * code for element */
172	u_int8_t		ces_sensequal;	  /*
173						   * additional sense
174						   * code qualifier
175						   */
176	u_int8_t		ces_source_type;  /*
177						   * element type of
178						   * source address
179						   */
180	u_int16_t		ces_source_addr;  /*
181						   * source address of medium
182						   */
183	changer_voltag_t     	ces_pvoltag;	  /* primary volume tag */
184	changer_voltag_t	ces_avoltag;	  /* alternate volume tag */
185	u_int8_t		ces_scsi_id;	  /* SCSI id of element */
186	u_int8_t		ces_scsi_lun;	  /* SCSI lun of element */
187
188	/*
189	 * Data members for SMC3 and later versions
190	 */
191	u_int8_t		ces_medium_type;
192#define	CES_MEDIUM_TYPE_UNKNOWN		0	/* Medium type unspecified */
193#define	CES_MEDIUM_TYPE_DATA		1	/* Data medium */
194#define	CES_MEDIUM_TYPE_CLEANING	2	/* Cleaning medium */
195#define	CES_MEDIUM_TYPE_DIAGNOSTIC	3	/* Diagnostic medium */
196#define	CES_MEDIUM_TYPE_WORM		4	/* WORM medium */
197#define	CES_MEDIUM_TYPE_MICROCODE	5	/* Microcode image medium */
198
199	u_int8_t		ces_protocol_id;
200#define	CES_PROTOCOL_ID_FCP_4	0	/* Fiber channel */
201#define	CES_PROTOCOL_ID_SPI_5	1	/* Parallel SCSI */
202#define	CES_PROTOCOL_ID_SSA_S3P	2	/* SSA */
203#define	CES_PROTOCOL_ID_SBP_3	3	/* IEEE 1394 */
204#define	CES_PROTOCOL_ID_SRP	4	/* SCSI Remote DMA */
205#define	CES_PROTOCOL_ID_ISCSI	5	/* iSCSI */
206#define	CES_PROTOCOL_ID_SPL	6	/* SAS */
207#define	CES_PROTOCOL_ID_ADT_2	7	/* Automation/Drive Interface */
208#define	CES_PROTOCOL_ID_ACS_2	8	/* ATA */
209
210	u_int8_t		ces_assoc;
211#define	CES_ASSOC_LOGICAL_UNIT	0
212#define	CES_ASSOC_TARGET_PORT	1
213#define	CES_ASSOC_TARGET_DEVICE	2
214
215	u_int8_t		ces_designator_type;
216#define	CES_DESIGNATOR_TYPE_VENDOR_SPECIFIC	0
217#define	CES_DESIGNATOR_TYPE_T10_VENDOR_ID	1
218#define	CES_DESIGNATOR_TYPE_EUI_64		2
219#define	CES_DESIGNATOR_TYPE_NAA			3
220#define	CES_DESIGNATOR_TYPE_TARGET_PORT_ID	4
221#define	CES_DESIGNATOR_TYPE_TARGET_PORT_GRP	5
222#define	CES_DESIGNATOR_TYPE_LOGICAL_UNIT_GRP	6
223#define	CES_DESIGNATOR_TYPE_MD5_LOGICAL_UNIT_ID	7
224#define	CES_DESIGNATOR_TYPE_SCSI_NAME_STRING	8
225
226	u_int8_t		ces_code_set;
227#define	CES_CODE_SET_RESERVED	0
228#define	CES_CODE_SET_BINARY	1
229#define	CES_CODE_SET_ASCII	2
230#define	CES_CODE_SET_UTF_8	3
231
232	u_int8_t		ces_designator_length;
233
234#define	CES_MAX_DESIGNATOR_LENGTH (1 << 8)
235	u_int8_t		ces_designator[CES_MAX_DESIGNATOR_LENGTH + 1];
236};
237
238struct changer_element_status_request {
239	u_int16_t			cesr_element_type;
240	u_int16_t			cesr_element_base;
241	u_int16_t			cesr_element_count;
242
243	u_int16_t			cesr_flags;
244#define	CESR_VOLTAGS	0x01
245
246	struct changer_element_status	*cesr_element_status;
247};
248
249struct changer_set_voltag_request {
250	u_int16_t		csvr_type;
251	u_int16_t		csvr_addr;
252
253	u_int16_t		csvr_flags;
254#define	CSVR_MODE_MASK		0x0f	/* mode mask, acceptable modes below: */
255#define	CSVR_MODE_SET		0x00	/* set volume tag if not set */
256#define	CSVR_MODE_REPLACE	0x01	/* unconditionally replace volume tag */
257#define	CSVR_MODE_CLEAR		0x02	/* clear volume tag */
258
259#define	CSVR_ALTERNATE		0x10	/* set to work with alternate voltag */
260
261	changer_voltag_t     	csvr_voltag;
262};
263
264#define	CESTATUS_BITS	\
265	"\20\6INENAB\5EXENAB\4ACCESS\3EXCEPT\2IMPEXP\1FULL"
266
267#define	CHIOMOVE	_IOW('c', 0x01, struct changer_move)
268#define	CHIOEXCHANGE	_IOW('c', 0x02, struct changer_exchange)
269#define	CHIOPOSITION	_IOW('c', 0x03, struct changer_position)
270#define	CHIOGPICKER	_IOR('c', 0x04, int)
271#define	CHIOSPICKER	_IOW('c', 0x05, int)
272#define	CHIOGPARAMS	_IOR('c', 0x06, struct changer_params)
273#define	CHIOIELEM	_IOW('c', 0x07, u_int32_t)
274#define	OCHIOGSTATUS	_IOW('c', 0x08, struct changer_element_status_request)
275#define	CHIOSETVOLTAG	_IOW('c', 0x09, struct changer_set_voltag_request)
276#define	CHIOGSTATUS	_IOW('c', 0x0A, struct changer_element_status_request)
277
278#endif /* !_SYS_CHIO_H_ */
279