GENERIC revision 40165
1# 2# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks 3# 4# For more information read the handbook part System Administration -> 5# Configuring the FreeBSD Kernel -> The Configuration File. 6# The handbook is available in /usr/share/doc/handbook or online as 7# latest version from the FreeBSD World Wide Web server 8# <URL:http://www.FreeBSD.ORG/> 9# 10# An exhaustive list of options and more detailed explanations of the 11# device lines is present in the ./LINT configuration file. If you are 12# in doubt as to the purpose or necessity of a line, check first in LINT. 13# 14# $Id: GENERIC,v 1.123 1998/10/07 13:51:45 obrien Exp $ 15 16machine "i386" 17cpu "I386_CPU" 18cpu "I486_CPU" 19cpu "I586_CPU" 20cpu "I686_CPU" 21ident GENERIC 22maxusers 32 23 24options MATH_EMULATE #Support for x87 emulation 25options INET #InterNETworking 26options FFS #Berkeley Fast Filesystem 27options FFS_ROOT #FFS usable as root device [keep this!] 28options MFS #Memory Filesystem 29options MFS_ROOT #MFS usable as root device, "MFS" req'ed 30options NFS #Network Filesystem 31options NFS_ROOT #NFS usable as root device, "NFS" req'ed 32options MSDOSFS #MSDOS Filesystem 33options "CD9660" #ISO 9660 Filesystem 34options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed 35options PROCFS #Process filesystem 36options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] 37options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device 38options UCONSOLE #Allow users to grab the console 39options FAILSAFE #Be conservative 40options USERCONFIG #boot -c editor 41options VISUAL_USERCONFIG #visual boot -c editor 42 43config kernel root on wd0 44 45controller isa0 46controller eisa0 47controller pci0 48 49controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr 50disk fd0 at fdc0 drive 0 51disk fd1 at fdc0 drive 1 52# Unless you know very well what you're doing, leave ft0 at drive 2, or 53# remove the line entirely if you don't need it. Trying to configure 54# it on another unit might cause surprises, see PR kern/7176. 55tape ft0 at fdc0 drive 2 56 57options "CMD640" # work around CMD640 chip deficiency 58controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr 59disk wd0 at wdc0 drive 0 60disk wd1 at wdc0 drive 1 61 62controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr 63disk wd2 at wdc1 drive 0 64disk wd3 at wdc1 drive 1 65 66options ATAPI #Enable ATAPI support for IDE bus 67options ATAPI_STATIC #Don't do it as an LKM 68device wcd0 #IDE CD-ROM 69device wfd0 #IDE Floppy (e.g. LS-120) 70 71# A single entry for any of these controllers (ncr, ahb, ahc, amd) is 72# sufficient for any number of installed devices. 73controller ncr0 74#controller amd0 75controller ahb0 76controller ahc0 77controller isp0 78 79# This controller offers a number of configuration options, too many to 80# document here - see the LINT file in this directory and look up the 81# dpt0 entry there for much fuller documentation on this. 82controller dpt0 83 84controller adv0 at isa? port ? cam irq ? 85controller adw0 86controller bt0 at isa? port ? cam irq ? 87controller aha0 at isa? port ? cam irq ? 88#controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr 89#controller aic0 at isa? port 0x340 bio irq 11 vector aicintr 90#controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr 91#controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr 92#controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr 93 94controller scbus0 95 96device da0 97 98device sa0 99 100device pass0 101 102device cd0 #Only need one of these, the code dynamically grows 103 104device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr 105device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr 106 107controller matcd0 at isa? port 0x230 bio 108 109device scd0 at isa? port 0x230 bio 110 111# syscons is the default console driver, resembling an SCO console 112device sc0 at isa? port "IO_KBD" conflicts tty irq 1 vector scintr 113# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver 114#device vt0 at isa? port "IO_KBD" conflicts tty irq 1 vector pcrint 115#options XSERVER # support for X server 116#options FAT_CURSOR # start with block cursor 117# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines 118#options PCVT_SCANSET=2 # IBM keyboards are non-std 119 120device npx0 at isa? port "IO_NPX" irq 13 vector npxintr 121 122# 123# Laptop support (see LINT for more options) 124# 125device apm0 at isa? disable flags 0x31 # Advanced Power Management 126 127# PCCARD (PCMCIA) support 128#controller card0 129#device pcic0 at card? 130#device pcic1 at card? 131 132device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 vector siointr 133device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr 134device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr 135device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr 136 137device lpt0 at isa? port? tty irq 7 vector lptintr 138 139device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr 140 141# Order is important here due to intrusive probes, do *not* alphabetize 142# this list of network interfaces until the probes have been fixed. 143# Right now it appears that the ie0 must be probed before ep0. See 144# revision 1.20 of this file. 145device de0 146device fxp0 147device tl0 148device tx0 149device vx0 150device xl0 151 152device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 vector edintr 153device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr 154device ep0 at isa? port 0x300 net irq 10 vector epintr 155device ex0 at isa? port? net irq? vector exintr 156device fe0 at isa? port 0x300 net irq ? vector feintr 157device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr 158device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr 159device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zeintr 160device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr 161device cs0 at isa? port 0x300 net irq ? vector csintr 162 163pseudo-device loop 164pseudo-device ether 165pseudo-device sl 1 166pseudo-device ppp 1 167pseudo-device tun 1 168pseudo-device pty 16 169pseudo-device gzip # Exec gzipped a.out's 170 171# KTRACE enables the system-call tracing facility ktrace(2). 172# This adds 4 KB bloat to your kernel, and slightly increases 173# the costs of each syscall. 174options KTRACE #kernel tracing 175 176# This provides support for System V shared memory. 177# 178options SYSVSHM 179