GENERIC revision 19219
1# 2# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks 3# 4# For more information read the handbook part System Administration -> 5# Configuring the FreeBSD Kernel -> The Configuration File. 6# The handbook is available in /usr/share/doc/handbook or online as 7# latest version from the FreeBSD World Wide Web server 8# <URL:http://www.FreeBSD.ORG/> 9# 10# An exhaustive list of options and more detailed explanations of the 11# device lines is present in the ./LINT configuration file. If you are 12# in doubt as to the purpose or necessity of a line, check first in LINT. 13# 14# $Id: GENERIC,v 1.76 1996/09/11 19:53:28 phk Exp $ 15 16machine "i386" 17cpu "I386_CPU" 18cpu "I486_CPU" 19cpu "I586_CPU" 20cpu "I686_CPU" 21ident GENERIC 22maxusers 10 23 24options MATH_EMULATE #Support for x87 emulation 25options INET #InterNETworking 26options FFS #Berkeley Fast Filesystem 27options NFS #Network Filesystem 28options MSDOSFS #MSDOS Filesystem 29options "CD9660" #ISO 9660 Filesystem 30options PROCFS #Process filesystem 31options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] 32options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device 33options BOUNCE_BUFFERS #include support for DMA bounce buffers 34options UCONSOLE #Allow users to grab the console 35options FAILSAFE #Be conservative 36options USERCONFIG #boot -c editor 37options VISUAL_USERCONFIG #visual boot -c editor 38 39config kernel root on wd0 40 41controller isa0 42controller eisa0 43controller pci0 44 45controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr 46disk fd0 at fdc0 drive 0 47disk fd1 at fdc0 drive 1 48tape ft0 at fdc0 drive 2 49 50controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr 51disk wd0 at wdc0 drive 0 52disk wd1 at wdc0 drive 1 53 54controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr 55disk wd2 at wdc1 drive 0 56disk wd3 at wdc1 drive 1 57 58options ATAPI #Enable ATAPI support for IDE bus 59options ATAPI_STATIC #Don't do it as an LKM 60device wcd0 #IDE CD-ROM 61 62# A single entry for any of these controllers (ncr, ahb, ahc) is sufficient 63# for any number of installed devices. 64controller ncr0 65controller ahb0 66controller ahc0 67options "AHC_FORCE_PIO" # Some motherboards choke on MemI/O, 68 # so use PIO in the ahc driver in the 69 # generic kernel. 70 71controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr 72controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr 73controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr 74controller aic0 at isa? port 0x340 bio irq 11 vector aicintr 75controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr 76controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr 77controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr 78 79controller scbus0 80 81device sd0 82 83device od0 #See LINT for possible `od' options. 84 85device st0 86 87device cd0 #Only need one of these, the code dynamically grows 88 89device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr 90device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr 91 92controller matcd0 at isa? port 0x230 bio 93 94device scd0 at isa? port 0x230 bio 95 96# syscons is the default console driver, resembling an SCO console 97device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr 98# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver 99#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint 100#options PCVT_FREEBSD=210 # pcvt running on FreeBSD >= 2.0.5 101#options XSERVER # include code for XFree86 102#options FAT_CURSOR # start with block cursor 103# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines 104#options PCVT_SCANSET=2 # IBM keyboards are non-std 105 106# Mandatory, don't remove 107device npx0 at isa? port "IO_NPX" irq 13 vector npxintr 108 109# 110# Laptop support (see LINT for more options) 111# 112device apm0 at isa? disable # Advanced Power Management 113options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS 114# PCCARD (PCMCIA) support 115#controller crd0 116#device pcic0 at crd? 117#device pcic1 at crd? 118 119device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr 120device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr 121device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr 122device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr 123 124device lpt0 at isa? port? tty irq 7 vector lptintr 125device lpt1 at isa? port? tty 126device mse0 at isa? port 0x23c tty irq 5 vector mseintr 127 128device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12 vector psmintr 129 130# Order is important here due to intrusive probes, do *not* alphabetize 131# this list of network interfaces until the probes have been fixed. 132# Right now it appears that the ie0 must be probed before ep0. See 133# revision 1.20 of this file. 134device de0 135device fxp0 136device vx0 137 138device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr 139device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr 140device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr 141device ep0 at isa? port 0x300 net irq 10 vector epintr 142device fe0 at isa? port 0x300 net irq ? vector feintr 143device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr 144device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr 145device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr 146device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr 147device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr 148 149pseudo-device loop 150pseudo-device ether 151pseudo-device log 152pseudo-device sl 1 153# ijppp uses tun instead of ppp device 154#pseudo-device ppp 1 155pseudo-device tun 1 156pseudo-device pty 16 157pseudo-device gzip # Exec gzipped a.out's 158 159# KTRACE enables the system-call tracing facility ktrace(2). 160# This adds 4 KB bloat to your kernel, and slightly increases 161# the costs of each syscall. 162options KTRACE #kernel tracing 163 164