rex.x revision 273188
1/*-
2 * Copyright (c) 2010, Oracle America, Inc.
3 *
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions are
6 * met:
7 *
8 *     * Redistributions of source code must retain the above copyright
9 *       notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above
11 *       copyright notice, this list of conditions and the following
12 *       disclaimer in the documentation and/or other materials
13 *       provided with the distribution.
14 *     * Neither the name of the "Oracle America, Inc." nor the names of its
15 *       contributors may be used to endorse or promote products derived
16 *       from this software without specific prior written permission.
17 *
18 *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
19 *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
20 *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
21 *   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
22 *   COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
23 *   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 *   DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
25 *   GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 *   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
27 *   WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
28 *   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
29 *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 */
31
32/*
33 * Remote execution (rex) protocol specification
34 */
35
36#ifndef RPC_HDR
37%#ifndef lint
38%/*static char sccsid[] = "from: @(#)rex.x 1.3 87/09/18 Copyr 1987 Sun Micro";*/
39%/*static char sccsid[] = "from: @(#)rex.x	2.1 88/08/01 4.0 RPCSRC";*/
40%#endif /* not lint */
41%#include <sys/cdefs.h>
42%__FBSDID("$FreeBSD: releng/10.1/include/rpcsvc/rex.x 273188 2014-10-16 22:00:24Z hrs $");
43#endif
44
45const STRINGSIZE = 1024;
46typedef string rexstring<1024>;
47
48/*
49 * values to pass to REXPROC_SIGNAL
50 */
51const SIGINT = 2;	/* interrupt */
52
53/*
54 * Values for rst_flags, below
55 */
56const REX_INTERACTIVE = 1;	/* interactive mode */
57
58struct rex_start {
59	rexstring rst_cmd<>;	/* list of command and args */
60	rexstring rst_host;	/* working directory host name */
61	rexstring rst_fsname;	/* working directory file system name */
62	rexstring rst_dirwithin;/* working directory within file system */
63	rexstring rst_env<>;	/* list of environment */
64	unsigned int rst_port0;	/* port for stdin */
65	unsigned int rst_port1;	/* port for stdout */
66	unsigned int rst_port2;	/* port for stderr */
67	unsigned int rst_flags;	/* options - see const above */
68};
69
70struct rex_result {
71   	int rlt_stat;		/* integer status code */
72	rexstring rlt_message;	/* string message for human consumption */
73};
74
75
76struct sgttyb {
77	unsigned four;	/* always equals 4 */
78	opaque chars[4];
79	/* chars[0] == input speed */
80	/* chars[1] == output speed */
81	/* chars[2] == kill character */
82	/* chars[3] == erase character */
83	unsigned flags;
84};
85/* values for speeds above (baud rates)  */
86const B0  = 0;
87const B50 = 1;
88const B75 = 2;
89const B110 = 3;
90const B134 = 4;
91const B150 = 5;
92const B200 = 6;
93const B300 = 7;
94const B600 = 8;
95const B1200 = 9;
96const B1800 = 10;
97const B2400 = 11;
98const B4800 = 12;
99const B9600 = 13;
100const B19200 = 14;
101const B38400 = 15;
102
103/* values for flags above */
104const TANDEM = 0x00000001; /* send stopc on out q full */
105const CBREAK = 0x00000002; /* half-cooked mode */
106const LCASE = 0x00000004; /* simulate lower case */
107const ECHO = 0x00000008; /* echo input */
108const CRMOD = 0x00000010; /* map \r to \r\n on output */
109const RAW = 0x00000020; /* no i/o processing */
110const ODDP = 0x00000040; /* get/send odd parity */
111const EVENP = 0x00000080; /* get/send even parity */
112const ANYP = 0x000000c0; /* get any parity/send none */
113const NLDELAY = 0x00000300; /* \n delay */
114const  NL0 = 0x00000000;
115const  NL1 = 0x00000100; /* tty 37 */
116const  NL2 = 0x00000200; /* vt05 */
117const  NL3 = 0x00000300;
118const TBDELAY = 0x00000c00; /* horizontal tab delay */
119const  TAB0 = 0x00000000;
120const  TAB1 = 0x00000400; /* tty 37 */
121const  TAB2 = 0x00000800;
122const XTABS = 0x00000c00; /* expand tabs on output */
123const CRDELAY = 0x00003000; /* \r delay */
124const  CR0 = 0x00000000;
125const  CR1 = 0x00001000; /* tn 300 */
126const  CR2 = 0x00002000; /* tty 37 */
127const  CR3 = 0x00003000; /* concept 100 */
128const VTDELAY = 0x00004000; /* vertical tab delay */
129const  FF0 = 0x00000000;
130const  FF1 = 0x00004000; /* tty 37 */
131const BSDELAY = 0x00008000; /* \b delay */
132const  BS0 = 0x00000000;
133const  BS1 = 0x00008000;
134const CRTBS = 0x00010000; /* do backspacing for crt */
135const PRTERA = 0x00020000; /* \ ... / erase */
136const CRTERA = 0x00040000; /* " \b " to wipe out char */
137const TILDE = 0x00080000; /* hazeltine tilde kludge */
138const MDMBUF = 0x00100000; /* start/stop output on carrier intr */
139const LITOUT = 0x00200000; /* literal output */
140const TOSTOP = 0x00400000; /* SIGTTOU on background output */
141const FLUSHO = 0x00800000; /* flush output to terminal */
142const NOHANG = 0x01000000; /* no SIGHUP on carrier drop */
143const L001000 = 0x02000000;
144const CRTKIL = 0x04000000; /* kill line with " \b " */
145const PASS8 = 0x08000000;
146const CTLECH = 0x10000000; /* echo control chars as ^X */
147const PENDIN = 0x20000000; /* tp->t_rawq needs reread */
148const DECCTQ = 0x40000000; /* only ^Q starts after ^S */
149const NOFLSH = 0x80000000; /* no output flush on signal */
150
151struct tchars {
152	unsigned six;	/* always equals 6 */
153	opaque chars[6];
154	/* chars[0] == interrupt char */
155	/* chars[1] == quit char */
156	/* chars[2] == start output char */
157	/* chars[3] == stop output char */
158	/* chars[4] == end-of-file char */
159	/* chars[5] == input delimeter (like nl) */
160};
161
162struct ltchars {
163	unsigned six;	/* always equals 6 */
164	opaque chars[6];
165	/* chars[0] == stop process signal */
166	/* chars[1] == delayed stop process signal */
167	/* chars[2] == reprint line */
168	/* chars[3] == flush output */
169	/* chars[4] == word erase */
170	/* chars[5] == literal next character */
171	unsigned mode;
172};
173
174struct rex_ttysize {
175	int ts_lines;
176	int ts_cols;
177};
178
179struct rex_ttymode {
180    sgttyb basic;    /* standard unix tty flags */
181    tchars more; /* interrupt, kill characters, etc. */
182    ltchars yetmore; /* special Berkeley characters */
183    unsigned andmore;     /* and Berkeley modes */
184};
185
186/* values for andmore above */
187const LCRTBS = 0x0001;	/* do backspacing for crt */
188const LPRTERA = 0x0002;	/* \ ... / erase */
189const LCRTERA = 0x0004;	/* " \b " to wipe out char */
190const LTILDE = 0x0008;	/* hazeltine tilde kludge */
191const LMDMBUF = 0x0010;	/* start/stop output on carrier intr */
192const LLITOUT = 0x0020;	/* literal output */
193const LTOSTOP = 0x0040;	/* SIGTTOU on background output */
194const LFLUSHO = 0x0080;	/* flush output to terminal */
195const LNOHANG = 0x0100;	/* no SIGHUP on carrier drop */
196const LL001000 = 0x0200;
197const LCRTKIL = 0x0400;	/* kill line with " \b " */
198const LPASS8 = 0x0800;
199const LCTLECH = 0x1000;	/* echo control chars as ^X */
200const LPENDIN = 0x2000;	/* needs reread */
201const LDECCTQ = 0x4000;	/* only ^Q starts after ^S */
202const LNOFLSH = 0x8000;	/* no output flush on signal */
203
204program REXPROG {
205	version REXVERS {
206
207		/*
208		 * Start remote execution
209		 */
210		rex_result
211		REXPROC_START(rex_start) = 1;
212
213		/*
214		 * Wait for remote execution to terminate
215		 */
216		rex_result
217		REXPROC_WAIT(void) = 2;
218
219		/*
220		 * Send tty modes
221		 */
222		void
223		REXPROC_MODES(rex_ttymode) = 3;
224
225		/*
226		 * Send window size change
227		 */
228		void
229		REXPROC_WINCH(rex_ttysize) = 4;
230
231		/*
232		 * Send other signal
233		 */
234		void
235		REXPROC_SIGNAL(int) = 5;
236	} = 1;
237} = 100017;
238