rc revision 114118
1#!/bin/sh 2# 3# Copyright (c) 2000 The FreeBSD Project 4# All rights reserved. 5# 6# Redistribution and use in source and binary forms, with or without 7# modification, are permitted provided that the following conditions 8# are met: 9# 1. Redistributions of source code must retain the above copyright 10# notice, this list of conditions and the following disclaimer. 11# 2. Redistributions in binary form must reproduce the above copyright 12# notice, this list of conditions and the following disclaimer in the 13# documentation and/or other materials provided with the distribution. 14# 15# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25# SUCH DAMAGE. 26# 27# @(#)rc 5.27 (Berkeley) 6/5/91 28# $FreeBSD: head/etc/rc 114118 2003-04-27 07:08:07Z dougb $ 29# 30 31# System startup script run by init on autoboot 32# or after single-user. 33# Output and error are redirected to console by init, 34# and the console is the controlling terminal. 35 36# Note that almost all of the user-configurable behavior is no longer in 37# this file, but rather in /etc/defaults/rc.conf. Please check that file 38# first before contemplating any changes here. If you do need to change 39# this file for some reason, we would like to know about it. 40 41stty status '^T' 42 43# Set shell to ignore SIGINT (2), but not children; 44# shell catches SIGQUIT (3) and returns to single user after fsck. 45# 46trap : 2 47trap : 3 # shouldn't be needed 48 49HOME=/ 50PATH=/sbin:/bin:/usr/sbin:/usr/bin 51export HOME PATH 52 53# check_rcng() is run in a subshell solely to determine the 54# RCNG mode. We do not want to pollute our variable space 55# too soon so the procedure must be run in a subshell. An 56# exit code of 3 indicates RCNG is enabled. 57# 58check_rcng() 59{ 60 if [ -r /etc/defaults/rc.conf ]; then 61 . /etc/defaults/rc.conf 62 source_rc_confs 63 elif [ -r /etc/rc.conf ]; then 64 . /etc/rc.conf 65 fi 66 67 # Diskless setups have to depend on a different mechanism since 68 # their config files haven't been retargeted yet. 69 # 70 [ -e /.rcng_yes ] && rc_ng="YES" 71 case ${rc_ng} in 72 [Yy][Ee][Ss]) 73 exit 3 74 ;; 75 *) 76 exit 0 77 ;; 78 esac 79} 80 81( check_rcng ) 82if [ $? = 3 ]; then 83 rc_ng=YES 84else 85 rc_ng=NO 86 echo -n ; sleep 1 ; echo -n ; sleep 1 ; echo -n 87 echo '' 88 echo '**** The old versions of the rc scripts are deprecated, and' 89 echo ' will soon be removed. Make sure to update /etc and' 90 echo ' check that rc_ng is YES in /etc/defaults/rc.conf.' 91 echo ' Please report any rc problems to freebsd-rc@yahoogroups.com' 92 echo ' and/or freebsd-current@freebsd.org.' 93 echo '' 94 sleep 3 95fi 96 97case ${rc_ng} in 98YES) 99 . /etc/rc.subr 100 101 # Note: the system configuration files are loaded as part of 102 # the RCNG system (rc.d/rccond). Do not load them here as it may 103 # interfere with diskless booting. 104 # 105 if [ "$1" = autoboot ]; then 106 autoboot=yes 107 _boot="faststart" 108 rc_fast=yes # run_rc_command(): do fast booting 109 else 110 autoboot=no 111 _boot="start" 112 fi 113 114 os=`eval ${CMD_OSTYPE}` 115 files=`rcorder -k ${os} -s nostart /etc/rc.d/* 2>/dev/null` 116 117 for _rc_elem in ${files}; do 118 run_rc_script ${_rc_elem} ${_boot} 119 done 120 121 echo '' 122 date 123 exit 0 124 ;; 125*) 126 # fall-through to the old rc scripts 127 ;; 128esac 129 130bootmode=$1 131 132# BOOTP diskless boot. We have to run the rc file early in order to 133# retarget various config files. 134# 135if [ -r /etc/rc.diskless1 ]; then 136 dlv=`/sbin/sysctl -n vfs.nfs.diskless_valid 2> /dev/null` 137 if [ ${dlv:=0} != 0 ]; then 138 . /etc/rc.diskless1 139 fi 140fi 141 142# If there is a global system configuration file, suck it in. 143# 144if [ -r /etc/defaults/rc.conf ]; then 145 . /etc/defaults/rc.conf 146 source_rc_confs 147elif [ -r /etc/rc.conf ]; then 148 . /etc/rc.conf 149fi 150 151# XXX - Deprecated variable name support 152# for rpcbind and ntpd 153# 154[ -n "$portmap_enable" ] && rpcbind_enable="$portmap_enable" 155[ -n "$portmap_program" ] && rpcbind_program="$portmap_program" 156[ -n "$portmap_flags" ] && rpcbind_flags="$portmap_flags" 157[ -n "$single_mountd_enable" ] && mountd_enable="$single_mountd_enable" 158[ -n "$xntpd_enable" ] && ntpd_enable="$xntpd_enable" 159[ -n "$xntpd_program" ] && ntpd_program="$xntpd_program" 160[ -n "$xntpd_flags" ] && ntpd_flags="$xntpd_flags" 161 162feed_dev_random() { 163 if [ -f "${1}" -a -r "${1}" -a -s "${1}" ]; then 164# echo "Using ${1} as an entropy file" 165 cat "${1}" | dd of=/dev/random bs=8k 2>/dev/null 166 fi 167} 168 169chkdepend() { 170 svc=$1 171 svc_var=$2 172 dep=$3 173 dep_var=$4 174 175 eval svc_val=\${$svc_var} 176 eval dep_val=\${$dep_var} 177 178 case ${svc_val} in 179 [Yy][Ee][Ss]) 180 case ${dep_val} in 181 [Yy][Ee][Ss]) 182 ;; 183 *) 184 eval ${dep_var}="YES" 185 echo "DEPENDENCY NOTE: ${dep} will be enabled" \ 186 "to support ${svc}" 187 ;; 188 esac 189 ;; 190 esac 191} 192 193chkdepend amd amd_enable rpcbind rpcbind_enable 194chkdepend amd amd_enable NFS nfs_client_enable 195chkdepend NFS nfs_server_enable rpcbind rpcbind_enable 196chkdepend NIS nis_server_enable rpcbind rpcbind_enable 197chkdepend NIS nis_client_enable rpcbind rpcbind_enable 198 199# Enable dumpdev early so that a crash during the boot process can be caught. 200# 201case ${dumpdev} in 202[Nn][Oo] | '') 203 dumpdev='NO' 204 ;; 205*) 206 /sbin/dumpon -v ${dumpdev} 207 ;; 208esac 209 210# Enable harvesting of entropy via devices. The sooner this happens the 211# better so that we can take advantage of the boot process. 212# 213echo -n 'Entropy harvesting:' 214 215case ${harvest_interrupt} in 216[Nn][Oo]) 217 ;; 218*) 219 if [ -w /dev/random ]; then 220 /sbin/sysctl kern.random.sys.harvest.interrupt=1 >/dev/null 221 echo -n ' interrupts' 222 fi 223 ;; 224esac 225 226case ${harvest_ethernet} in 227[Nn][Oo]) 228 ;; 229*) 230 if [ -w /dev/random ]; then 231 /sbin/sysctl kern.random.sys.harvest.ethernet=1 >/dev/null 232 echo -n ' ethernet' 233 fi 234 ;; 235esac 236 237case ${harvest_p_to_p} in 238[Nn][Oo]) 239 ;; 240*) 241 if [ -w /dev/random ]; then 242 /sbin/sysctl kern.random.sys.harvest.point_to_point=1 >/dev/null 243 echo -n ' point_to_point' 244 fi 245 ;; 246esac 247 248echo '.' 249 250# First pass at reseeding /dev/random. 251# 252case ${entropy_file} in 253[Nn][Oo] | '') 254 ;; 255*) 256 if [ -w /dev/random ]; then 257 feed_dev_random "${entropy_file}" 258 fi 259 ;; 260esac 261 262# XXX temporary until we can get the entropy 263# harvesting rate up 264# Entropy below is not great, 265# but better than nothing. 266( ps -fauxww; sysctl -a; date; df -ib; dmesg; ps -fauxww; ) \ 267 | dd of=/dev/random bs=8k 2>/dev/null 268cat /bin/ls | dd of=/dev/random bs=8k 2>/dev/null 269 270# Configure ccd devices. 271# 272if [ -r /etc/ccd.conf ]; then 273 ccdconfig -C 274fi 275 276case ${start_vinum} in 277[Yy][Ee][Ss]) 278 vinum start 279 ;; 280esac 281 282swapon -a 283 284# Last chance to do things before potentially waiting for 285# operator to do fsck related tasks 286if [ -r /etc/rc.early ]; then 287 . /etc/rc.early 288fi 289 290case ${bootmode} in 291autoboot) 292 echo 'Automatic boot in progress...' 293 case ${background_fsck} in 294 [Yy][Ee][Ss]) 295 fsck -F -p 296 ;; 297 *) 298 fsck -p 299 ;; 300 esac 301 case $? in 302 0) 303 ;; 304 2) 305 exit 1 306 ;; 307 4) 308 reboot 309 echo 'Reboot failed... help!' 310 exit 1 311 ;; 312 8) 313 case ${fsck_y_enable} in 314 [Yy][Ee][Ss]) 315 echo 'File system preen failed, trying fsck -y . . .' 316 fsck -y 317 case $? in 318 0) 319 ;; 320 *) 321 echo 'Automatic filesystem check failed . . . help!' 322 exit 1 323 ;; 324 esac 325 ;; 326 *) 327 echo 'Automatic filesystem check failed . . . help!' 328 exit 1 329 ;; 330 esac 331 ;; 332 12) 333 echo 'Reboot interrupted' 334 exit 1 335 ;; 336 130) 337 # interrupt before catcher installed 338 exit 1 339 ;; 340 *) 341 echo 'Unknown error in reboot' 342 exit 1 343 ;; 344 esac 345 ;; 346*) 347 echo 'Skipping disk checks ...' 348 ;; 349esac 350 351set -T 352trap "echo 'Reboot interrupted'; exit 1" 3 353 354# root normally must be read/write, but if this is a BOOTP NFS 355# diskless boot it does not have to be. 356# 357case ${root_rw_mount} in 358[Nn][Oo] | '') 359 ;; 360*) 361 if ! mount -u -o rw / ; then 362 echo 'Mounting root filesystem rw failed, startup aborted' 363 exit 1 364 fi 365 ;; 366esac 367 368umount -a >/dev/null 2>&1 369 370# Set up the list of network filesystem types for which mounting should be 371# delayed until after network initialization. 372networkfs_types='nfs:NFS smbfs:SMB portalfs:PORTAL' 373case ${extra_netfs_types} in 374[Nn][Oo]) 375 ;; 376*) 377 networkfs_types="${networkfs_types} ${extra_netfs_types}" 378 ;; 379esac 380 381# Mount everything except nfs filesystems. 382mount_excludes='no' 383for i in ${networkfs_types}; do 384 fstype=${i%:*} 385 mount_excludes="${mount_excludes}${fstype}," 386done 387mount_excludes=${mount_excludes%,} 388mount -a -t ${mount_excludes} 389 390case $? in 3910) 392 ;; 393*) 394 echo 'Mounting /etc/fstab filesystems failed, startup aborted' 395 exit 1 396 ;; 397esac 398 399# Run custom disk mounting function here 400# 401if [ -n "${diskless_mount}" -a -r "${diskless_mount}" ]; then 402 sh ${diskless_mount} 403fi 404 405# If we booted a special kernel remove the record so we will boot 406# the default kernel next time 407rm -f /boot/nextboot.conf 408 409# Reseed /dev/random with previously stored entropy. 410case ${entropy_dir} in 411[Nn][Oo]) 412 ;; 413*) 414 entropy_dir=${entropy_dir:-/var/db/entropy} 415 if [ -d "${entropy_dir}" ]; then 416 if [ -w /dev/random ]; then 417 for seedfile in ${entropy_dir}/*; do 418 feed_dev_random "${seedfile}" 419 done 420 fi 421 fi 422 ;; 423esac 424 425case ${entropy_file} in 426[Nn][Oo] | '') 427 ;; 428*) 429 if [ -w /dev/random ]; then 430 feed_dev_random "${entropy_file}" 431 fi 432 ;; 433esac 434 435adjkerntz -i 436 437purgedir() { 438 local dir file 439 440 if [ $# -eq 0 ]; then 441 purgedir . 442 else 443 for dir 444 do 445 ( 446 cd "$dir" && for file in .* * 447 do 448 [ ."$file" = .. -o ."$file" = ... ] && continue 449 if [ -d "$file" -a ! -L "$file" ] 450 then 451 purgedir "$file" 452 else 453 rm -f -- "$file" 454 fi 455 done 456 ) 457 done 458 fi 459} 460 461clean_var() { 462 if [ -d /var/run -a ! -f /var/run/clean_var ]; then 463 purgedir /var/run 464 # Keep a copy of the boot messages around 465 dmesg >/var/run/dmesg.boot 466 # And an initial utmp file 467 (cd /var/run && cp /dev/null utmp && chmod 644 utmp;) 468 >/var/run/clean_var 469 fi 470 if [ -d /var/spool/lock -a ! -f /var/spool/lock/clean_var ]; then 471 purgedir /var/spool/lock 472 >/var/spool/lock/clean_var 473 fi 474 rm -rf /var/spool/uucp/.Temp/* 475} 476 477# network_pass1() *may* end up writing stuff to /var - we don't want to 478# remove it immediately afterwards - *nor* do we want to fail to clean 479# an NFS-mounted /var. 480rm -f /var/run/clean_var /var/spool/lock/clean_var 481clean_var 482 483# Add additional swapfile, if configured. 484# 485case ${swapfile} in 486[Nn][Oo] | '') 487 ;; 488*) 489 if [ -w "${swapfile}" -a -c /dev/mdctl ]; then 490 echo "Adding ${swapfile} as additional swap" 491 mdev=`mdconfig -a -t vnode -f ${swapfile}` && swapon /dev/${mdev} 492 fi 493 ;; 494esac 495 496# Early pass to set the variables we can 497# 498if [ -r /etc/rc.sysctl ]; then 499 sh /etc/rc.sysctl first 500fi 501 502# Configure serial devices 503# 504if [ -r /etc/rc.serial ]; then 505 . /etc/rc.serial 506fi 507 508# Start up PC-card configuration 509# 510if [ -r /etc/rc.pccard ]; then 511 . /etc/rc.pccard 512fi 513 514# Start up the initial network configuration. 515# 516if [ -r /etc/rc.network ]; then 517 . /etc/rc.network # We only need to do this once. 518 network_pass1 519fi 520 521case ${ipv6_enable} in 522[Yy][Ee][Ss]) 523 if [ -r /etc/rc.network6 ]; then 524 . /etc/rc.network6 # We only need to do this once also. 525 network6_pass1 526 fi 527 ;; 528esac 529 530# Mount NFS filesystems if present in /etc/fstab 531# 532# XXX When the vfsload() issues with nfsclient support and related sysctls 533# have been resolved, this block can be removed, and the condition that 534# skips nfs in the following block (for "other network filesystems") can 535# be removed. 536case "`mount -d -a -t nfs 2> /dev/null`" in 537*mount_nfs*) 538 # Handle absent nfs client support 539 nfsclient_in_kernel=0 540 if sysctl vfs.nfs >/dev/null 2>&1; then 541 nfsclient_in_kernel=1 542 else 543 kldload nfsclient && nfsclient_in_kernel=1 544 fi 545 546 case ${nfsclient_in_kernel} in 547 1) 548 echo -n 'Mounting NFS filesystem:' 549 mount -a -t nfs 550 echo '.' 551 ;; 552 *) 553 echo 'Warning: nfs mount requested, but no nfs client in kernel' 554 ;; 555 esac 556 ;; 557esac 558 559# Mount other network filesystems if present in /etc/fstab 560for i in ${networkfs_types}; do 561 fstype=${i%:*} 562 fsdecr=${i#*:} 563 564 if [ "${fstype}" = "nfs" ]; then 565 continue 566 fi 567 case "`mount -d -a -t ${fstype}`" in 568 *mount_${fstype}*) 569 echo -n "Mounting ${fsdecr} filesystems:" 570 mount -a -t ${fstype} 571 echo '.' 572 ;; 573 esac 574done 575 576# Whack the pty perms back into shape. 577# 578if ls /dev/tty[pqrsPQRS]* > /dev/null 2>&1; then 579 chflags 0 /dev/tty[pqrsPQRS]* 580 chmod 666 /dev/tty[pqrsPQRS]* 581 chown root:wheel /dev/tty[pqrsPQRS]* 582fi 583 584# Clean up left-over files 585# 586clean_var # If it hasn't already been done 587rm /var/run/clean_var /var/spool/lock/clean_var 588 589# Clearing /tmp at boot-time seems to have a long tradition. It doesn't 590# help in any way for long-living systems, and it might accidentally 591# clobber files you would rather like to have preserved after a crash 592# (if not using mfs /tmp anyway). 593# 594# See also the example of another cleanup policy in /etc/periodic/daily. 595# 596case ${clear_tmp_enable} in 597[Yy][Ee][Ss]) 598 echo -n 'Clearing /tmp:' 599 # prune quickly with one rm, then use find to clean up /tmp/[lq]* 600 # (not needed with mfs /tmp, but doesn't hurt there...) 601 (cd /tmp && rm -rf [a-km-pr-zA-Z]* && 602 find -d . ! -name . ! -name lost+found ! -name quota.user \ 603 ! -name quota.group -exec rm -rf -- {} \;) 604 echo '.' 605 ;; 606esac 607 608# Remove X lock files, since they will prevent you from restarting X11 609# after a system crash. 610# 611rm -f /tmp/.X*-lock 612rm -fr /tmp/.X11-unix 613mkdir -m 1777 /tmp/.X11-unix 614 615# Snapshot any kernel -c changes back to disk here <someday>. 616# This has changed with ELF and /kernel.config. 617 618# Load LOMAC(4) security if wanted. 619case ${lomac_enable} in 620[Yy][Ee][Ss]) 621 kldload mac_lomac >/dev/null 2>&1 622 ;; 623esac 624 625echo -n 'Additional daemons:' 626 627# Start system logging and name service. Named needs to start before syslogd 628# if you don't have a /etc/resolv.conf. 629# 630case ${syslogd_enable} in 631[Yy][Ee][Ss]) 632 # Transitional symlink (for the next couple of years :) until all 633 # binaries have had a chance to move towards /var/run/log. 634 if [ ! -L /dev/log ]; then 635 # might complain for r/o root f/s 636 ln -sf /var/run/log /dev/log 637 fi 638 639 rm -f /var/run/log 640 echo -n ' syslogd'; 641 ${syslogd_program:-/usr/sbin/syslogd} ${syslogd_flags} 642 ;; 643esac 644 645echo '.' 646 647# Build device name databases if we are not using DEVFS 648# 649if sysctl vfs.devfs.generation > /dev/null 2>&1 ; then 650 rm -f /var/run/dev.db 651else 652 dev_mkdb 653fi 654 655# $dumpdir should be a directory or a symbolic link 656# to the crash directory if core dumps are to be saved. 657# 658if [ "${dumpdev}" != 'NO' ]; then 659 case ${dumpdir} in 660 '') 661 dumpdir='/var/crash' 662 ;; 663 [Nn][Oo]) 664 dumpdir='NO' 665 ;; 666 esac 667 668 if [ "${dumpdir}" != 'NO' ]; then 669 echo -n 'Checking for core dump: ' 670 /sbin/savecore ${savecore_flags} "${dumpdir}" 671 fi 672fi 673 674if [ -n "${network_pass1_done}" ]; then 675 network_pass2 676fi 677 678# Enable/Check the quotas (must be after ypbind if using NIS) 679# 680case ${enable_quotas} in 681[Yy][Ee][Ss]) 682 case ${check_quotas} in 683 [Yy][Ee][Ss]) 684 echo -n 'Checking quotas:' 685 quotacheck -a 686 echo ' done.' 687 ;; 688 esac 689 690 echo -n 'Enabling quotas:' 691 quotaon -a 692 echo ' done.' 693 ;; 694esac 695 696if [ -n "${network_pass2_done}" ]; then 697 network_pass3 698fi 699 700# Check the password temp/lock file 701# 702if [ -e /etc/ptmp ]; then 703 logger -s -p auth.err \ 704 "password file may be incorrect -- /etc/ptmp exists" 705fi 706 707case ${accounting_enable} in 708[Yy][Ee][Ss]) 709 if [ -d /var/account ]; then 710 echo 'Turning on accounting:' 711 if [ ! -e /var/account/acct ]; then 712 touch /var/account/acct 713 fi 714 accton /var/account/acct 715 fi 716 ;; 717esac 718 719# Make shared lib searching a little faster. Leave /usr/lib first if you 720# add your own entries or you may come to grief. 721# 722ldconfig="/sbin/ldconfig" 723case ${ldconfig_insecure} in 724[Yy][Ee][Ss]) 725 ldconfig="${ldconfig} -i" 726 ;; 727esac 728if [ -x /sbin/ldconfig ]; then 729 _LDC=/usr/lib 730 for i in ${ldconfig_paths}; do 731 if [ -d "${i}" ]; then 732 _LDC="${_LDC} ${i}" 733 fi 734 done 735 echo 'ELF ldconfig path:' ${_LDC} 736 ${ldconfig} ${_LDC} 737 738 # Legacy aout support for i386 only 739 case `sysctl -n hw.machine_arch` in 740 i386) 741 # Default the a.out ldconfig path. 742 : ${ldconfig_paths_aout=${ldconfig_paths}} 743 _LDC=/usr/lib/aout 744 for i in ${ldconfig_paths_aout}; do 745 if [ -d "${i}" ]; then 746 _LDC="${_LDC} ${i}" 747 fi 748 done 749 echo 'a.out ldconfig path:' ${_LDC} 750 ${ldconfig} -aout ${_LDC} 751 ;; 752 esac 753fi 754 755# Now start up miscellaneous daemons that don't belong anywhere else 756# 757echo -n 'Starting standard daemons:' 758case ${inetd_enable} in 759[Nn][Oo]) 760 ;; 761*) 762 echo -n ' inetd'; ${inetd_program:-/usr/sbin/inetd} ${inetd_flags} 763 ;; 764esac 765 766case ${cron_enable} in 767[Nn][Oo]) 768 ;; 769*) 770 echo -n ' cron'; ${cron_program:-/usr/sbin/cron} ${cron_flags} 771 ;; 772esac 773 774case ${lpd_enable} in 775[Yy][Ee][Ss]) 776 echo -n ' printer'; ${lpd_program:-/usr/sbin/lpd} ${lpd_flags} 777 ;; 778esac 779 780case ${sshd_enable} in 781[Yy][Ee][Ss]) 782 if [ -x ${sshd_program:-/usr/sbin/sshd} ]; then 783 echo -n ' sshd'; 784 ${sshd_program:-/usr/sbin/sshd} ${sshd_flags} 785 fi 786 ;; 787esac 788 789case ${usbd_enable} in 790[Yy][Ee][Ss]) 791 echo -n ' usbd'; /usr/sbin/usbd ${usbd_flags} 792 ;; 793esac 794 795case ${mta_start_script} in 796/*) 797 if [ -r ${mta_start_script} ]; then 798 sh ${mta_start_script} 799 fi 800 ;; 801esac 802 803echo '.' 804 805# Recover vi editor files. 806find /var/tmp/vi.recover ! -type f -a ! -type d -delete 807vibackup=`echo /var/tmp/vi.recover/vi.*` 808if [ "${vibackup}" != '/var/tmp/vi.recover/vi.*' ]; then 809 echo -n 'Recovering vi editor sessions:' 810 for i in /var/tmp/vi.recover/vi.*; do 811 # Only test files that are readable. 812 if [ ! -r "${i}" ]; then 813 continue 814 fi 815 816 # Unmodified nvi editor backup files either have the 817 # execute bit set or are zero length. Delete them. 818 if [ -x "${i}" -o ! -s "${i}" ]; then 819 rm -f "${i}" 820 fi 821 done 822 823 # It is possible to get incomplete recovery files, if the editor 824 # crashes at the right time. 825 virecovery=`echo /var/tmp/vi.recover/recover.*` 826 if [ "${virecovery}" != "/var/tmp/vi.recover/recover.*" ]; then 827 for i in /var/tmp/vi.recover/recover.*; do 828 # Only test files that are readable. 829 if [ ! -r "${i}" ]; then 830 continue 831 fi 832 833 # Delete any recovery files that are zero length, 834 # corrupted, or that have no corresponding backup file. 835 # Else send mail to the user. 836 recfile=`awk '/^X-vi-recover-path:/{print $2}' < "${i}"` 837 if [ -n "${recfile}" -a -s "${recfile}" ]; then 838 sendmail -t < "${i}" 839 else 840 rm -f "${i}" 841 fi 842 done 843 fi 844 echo '.' 845fi 846 847# Make a bounds file for msgs(1) if there isn't one already 848# 849if [ -d /var/msgs -a ! -f /var/msgs/bounds -a ! -L /var/msgs/bounds ]; then 850 echo 0 > /var/msgs/bounds 851fi 852 853case ${update_motd} in 854[Nn][Oo] | '') 855 ;; 856*) 857 if T=`mktemp /tmp/_motd.XXXXXX`; then 858 uname -v | sed -e 's,^\([^#]*\) #\(.* [1-2][0-9][0-9][0-9]\).*/\([^\]*\) $,\1 (\3) #\2,' > ${T} 859 awk '{if (NR == 1) {if ($1 == "FreeBSD") {next} else {print "\n"$0}} else {print}}' < /etc/motd >> ${T} 860 cmp -s ${T} /etc/motd || { 861 cp ${T} /etc/motd 862 chmod 644 /etc/motd 863 } 864 rm -f ${T} 865 fi 866 ;; 867esac 868 869# Run rc.devfs if readable to customize devfs 870# 871if [ -r /etc/rc.devfs ]; then 872 sh /etc/rc.devfs 873fi 874 875# Configure implementation specific stuff 876# 877arch=`uname -p` 878if [ -r /etc/rc.${arch} ]; then 879 . /etc/rc.${arch} 880fi 881 882# Configure the system console 883# 884if [ -r /etc/rc.syscons ]; then 885 . /etc/rc.syscons 886fi 887 888echo -n 'Additional ABI support:' 889 890# Load the SysV IPC API if requested. 891case ${sysvipc_enable} in 892[Yy][Ee][Ss]) 893 echo -n ' sysvipc' 894 kldload sysvmsg >/dev/null 2>&1 895 kldload sysvsem >/dev/null 2>&1 896 kldload sysvshm >/dev/null 2>&1 897 ;; 898esac 899 900# Start the Linux binary compatibility if requested. 901# 902case ${linux_enable} in 903[Yy][Ee][Ss]) 904 echo -n ' linux' 905 if ! kldstat -v | grep -E 'linux(aout|elf)' > /dev/null; then 906 kldload linux > /dev/null 2>&1 907 fi 908 if [ -x /compat/linux/sbin/ldconfig ]; then 909 /compat/linux/sbin/ldconfig 910 fi 911 ;; 912esac 913 914# Start the SysVR4 binary emulation if requested. 915# 916case ${svr4_enable} in 917[Yy][Ee][Ss]) 918 echo -n ' svr4'; kldload svr4 > /dev/null 2>&1 919 ;; 920esac 921 922echo '.' 923 924# Do traditional (but rather obsolete) rc.local file if it exists. If you 925# use this file and want to make it programmatic, source /etc/defaults/rc.conf 926# in /etc/rc.local and add your custom variables to /etc/rc.conf, as 927# shown below. Please do not put local extensions into /etc/rc itself. 928# Use /etc/rc.local 929# 930# ---- rc.local ---- 931# if [ -r /etc/defaults/rc.conf ]; then 932# . /etc/defaults/rc.conf 933# source_rc_confs 934# elif [ -r /etc/rc.conf ]; then 935# . /etc/rc.conf 936# fi 937# 938# ... additional startup conditionals ... 939# ---- rc.local ---- 940# 941if [ -r /etc/rc.local ]; then 942 echo -n 'Starting local daemons:' 943 sh /etc/rc.local 944 echo '.' 945fi 946 947# For each valid dir in $local_startup, search for init scripts matching *.sh 948# 949case ${local_startup} in 950[Nn][Oo] | '') 951 ;; 952*) 953 echo -n 'Local package initialization:' 954 slist="" 955 if [ -z "${script_name_sep}" ]; then 956 script_name_sep=" " 957 fi 958 for dir in ${local_startup}; do 959 if [ -d "${dir}" ]; then 960 for script in ${dir}/*.sh; do 961 slist="${slist}${script_name_sep}${script}" 962 done 963 fi 964 done 965 script_save_sep="$IFS" 966 IFS="${script_name_sep}" 967 for script in ${slist}; do 968 if [ -x "${script}" ]; then 969 (set -T 970 trap 'exit 1' 2 971 ${script} start) 972 elif [ -f "${script}" -o -L "${script}" ]; then 973 echo -n " (skipping ${script##*/}, not executable)" 974 fi 975 done 976 IFS="${script_save_sep}" 977 echo '.' 978 ;; 979esac 980 981if [ -n "${network_pass3_done}" ]; then 982 network_pass4 983fi 984 985# Late pass to set variables we missed the first time 986# 987if [ -r /etc/rc.sysctl ]; then 988 sh /etc/rc.sysctl last 989fi 990 991# Raise kernel security level. This should be done only after `fsck' has 992# repaired local filesystems if you want the securelevel to be greater than 1. 993# 994case ${kern_securelevel_enable} in 995[Yy][Ee][Ss]) 996 if [ "${kern_securelevel}" -ge 0 ]; then 997 echo 'Raising kernel security level: ' 998 sysctl kern.securelevel=${kern_securelevel} 999 fi 1000 ;; 1001esac 1002 1003# Start background fsck checks if necessary 1004case ${background_fsck} in 1005[Yy][Ee][Ss]) 1006 bgfsck_msg='Starting background file system checks' 1007 if [ ${background_fsck_delay:=0} -gt 0 ]; then 1008 bgfsck_msg="${bgfsck_msg} in ${background_fsck_delay} seconds" 1009 fi 1010 echo "${bgfsck_msg}." 1011 1012 (sleep ${background_fsck_delay}; nice -4 fsck -B -p) 2>&1 | \ 1013 logger -p daemon.notice -t fsck & 1014 ;; 1015esac 1016 1017echo '' 1018 1019date 1020 1021exit 0 1022 1023