gettytab revision 29610 
1#	from: @(#)gettytab	5.14 (Berkeley) 3/27/91
2#
3# Most of the table entries here are just copies of the old getty table,
4# it is by no means certain, or even likely, that any of them are optimal
5# for any purpose whatever.  Nor is it likely that more than a couple are
6# even correct.
7#
8# The default gettytab entry, used to set defaults for all other
9# entries, and in cases where getty is called with no table name.
10#
11# cb, ce and ck are desirable on most crt's.  The non-crt entries need to
12# be changed to turn them off (:cb@:ce@:ck@:).
13#
14# lc should always be on; it's a remainder of some stone age when there
15# have been terminals around not being able of handling lower-case
16# characters. Those terminals aren't supported any longer, but getty is
17# `smart' about them by default.
18#
19# Parity defaults to even, but the Pc entry and all the `std' entries
20# specify no parity.   The different parities are:
21#     (none): same as even except -inpck instead of inpck for login.
22#     ep:     getty will use raw mode (cs8 -parenb) (unless rw is set) and
23#             fake parity.  login will use even parity (cs7 parenb -parodd).
24#     op:     same as ep except odd parity (cs7 parenb parodd) for login.
25#             op overrides ep.
26#     ap:     same as ep except -inpck instead of inpck for login.
27#             ap overrides op and ep.
28#     np:     1. don't fake parity in getty.  The fake parity garbles
29#                characters on non-terminals (like pccons) that don't
30#                support parity.  It would probably better for getty not to
31#                try to fake parity.  It could just use cbreak mode so as
32#                not to force cs8 and let the hardware handle the parity.
33#                login has to be rely on the hardware anyway.
34#             2. set PASS8, giving cs8 -parenb -istrip -inpck.
35#     np:ep:  same as np except inpck.
36#     np:op:  same as np:ep except for parodd (but parodd is overridden).
37#     np:ap:  same as np except istrip.
38#
39default:\
40	:cb:ce:ck:lc:fd#1000:im=\r\nFreeBSD (%h) (%t)\r\n\r\n:sp#1200:
41
42#
43# Fixed speed entries
44#
45#	The "std.NNN" names are known to the special case
46#	portselector code in getty, however they can
47#	be assigned to any table desired.
48#	The "NNN-baud" names are known to the special case
49#	autobaud code in getty, and likewise can
50#	be assigned to any table desired (hopefully the same speed).
51#
52a|std.110|110-baud:\
53	:np:nd#1:cd#1:uc:sp#110:
54b|std.134|134.5-baud:\
55	:np:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl:
561|std.150|150-baud:\
57	:np:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 :
58c|std.300|300-baud:\
59	:np:nd#1:cd#1:sp#300:
60d|std.600|600-baud:\
61	:np:nd#1:cd#1:sp#600:
62f|std.1200|1200-baud:\
63	:np:fd#1:sp#1200:
646|std.2400|2400-baud:\
65	:np:sp#2400:
667|std.4800|4800-baud:\
67	:np:sp#4800:
682|std.9600|9600-baud:\
69	:np:sp#9600:
70g|std.19200|19200-baud:\
71	:np:sp#19200:
72std.38400|38400-baud:\
73	:np:sp#38400:
74std.57600|57600-baud:\
75	:np:sp#57600:
76std.115200|115200-baud:\
77	:np:sp#115200:
78
79#
80# Entry specifying explicit device settings.  See termios(4) and
81# /usr/include/termios.h, too.  The entry forces the tty into
82# CLOCAL mode (so no DCD is required), and uses Xon/Xoff flow control.
83#
84# cflags: CLOCAL | HUPCL | CREAD | CS8
85# oflags: OPOST | ONLCR | OXTABS
86# iflags: IXOFF | IXON | ICRNL | IGNPAR
87# lflags: IEXTEN | ICANON | ISIG | ECHOCTL | ECHO | ECHOK | ECHOE | ECHOKE
88#
89# The `0' flags don't have input enabled.  The `1' flags don't echo.
90# (Echoing is done inside getty itself.)
91#
92local.9600|CLOCAL tty @ 9600 Bd:\
93	:c0#0x0000c300:c1#0x0000cb00:c2#0x0000cb00:\
94	:o0#0x00000007:o1#0x00000002:o2#0x00000007:\
95	:i0#0x00000704:i1#0x00000000:i2#0x00000704:\
96	:l0#0x000005cf:l1#0x00000000:l2#0x000005cf:\
97	:sp#9600:
98
99#
100# Dial in rotary tables, speed selection via 'break'
101#
1020|d300|Dial-300:\
103	:nx=d1200:cd#2:sp#300:
104d1200|Dial-1200:\
105	:nx=d150:fd#1:sp#1200:
106d150|Dial-150:\
107	:nx=d110:lm@:tc=150-baud:
108d110|Dial-110:\
109	:nx=d300:tc=300-baud:
110
111#
112# Fast dialup terminals, 2400/1200/300 rotary (can start either way)
113#
114D2400|d2400|Fast-Dial-2400:\
115	:nx=D1200:tc=2400-baud:
1163|D1200|Fast-Dial-1200:\
117	:nx=D300:tc=1200-baud:
1185|D300|Fast-Dial-300:\
119	:nx=D2400:tc=300-baud:
120
121#
122#telebit (19200)
123#
124t19200:\
125	:nx=t2400:tc=19200-baud:
126t2400:\
127	:nx=t1200:tc=2400-baud:
128t1200:\
129	:nx=t19200:tc=1200-baud:
130
131#
132#telebit (9600)
133#
134t9600:\
135	:nx=t2400a:tc=9600-baud:
136t2400a:\
137	:nx=t1200a:tc=2400-baud:
138t1200a:\
139	:nx=t9600:tc=1200-baud:
140
141#
142# Odd special case terminals
143#
144-|tty33|asr33|Pity the poor user of this beast:\
145	:tc=110-baud:
146
1474|Console|Console Decwriter II:\
148	:nd@:cd@:rw:tc=300-baud:
149
150e|Console-1200|Console Decwriter III:\
151	:fd@:nd@:cd@:rw:tc=1200-baud:
152
153i|Interdata console:\
154	:uc:sp#0:
155
156l|lsi chess terminal:\
157	:sp#300:
158
159X|Xwindow|X window system:\
160	:fd@:nd@:cd@:rw:sp#9600:
161
162P|Pc|Pc console:\
163	:ht:np:sp#115200:
164
165#
166# Wierdo special case for fast crt's with hardcopy devices
167#
1688|T9600|CRT with hardcopy:\
169	:nx=T300:tc=9600-baud:
1709|T300|CRT with hardcopy (300):\
171	:nx=T9600:tc=300-baud:
172
173#
174# Plugboard, and misc other terminals
175#
176plug-9600|Plugboard-9600:\
177	:pf#1:tc=9600-baud:
178p|P9600|Plugboard-9600-rotary:\
179	:pf#1:nx=P300:tc=9600-baud:
180q|P300|Plugboard-300:\
181	:pf#1:nx=P1200:tc=300-baud:
182r|P1200|Plugboard-1200:\
183	:pf#1:nx=P9600:tc=1200-baud:
184
185#
186# XXXX Port selector
187#
188s|DSW|Port Selector:\
189	:ps:sp#2400:
190
191#
192# Auto-baud speed detect entry for Micom 600.
193# Special code in getty will switch this out
194# to one of the NNN-baud entries.
195#
196A|Auto-baud:\
197	:ab:sp#2400:f0#040:
198