gettytab revision 61513 
1# $FreeBSD: head/etc/gettytab 61513 2000-06-10 19:49:16Z phk $
2#	from: @(#)gettytab	5.14 (Berkeley) 3/27/91
3#
4# Most of the table entries here are just copies of the old getty table,
5# it is by no means certain, or even likely, that any of them are optimal
6# for any purpose whatever.  Nor is it likely that more than a couple are
7# even correct.
8#
9# The default gettytab entry, used to set defaults for all other
10# entries, and in cases where getty is called with no table name.
11#
12# cb, ce and ck are desirable on most crt's.  The non-crt entries need to
13# be changed to turn them off (:cb@:ce@:ck@:).
14#
15# lc should always be on; it's a remainder of some stone age when there
16# have been terminals around not being able of handling lower-case
17# characters. Those terminals aren't supported any longer, but getty is
18# `smart' about them by default.
19#
20# Parity defaults to even, but the Pc entry and all the `std' entries
21# specify no parity.   The different parities are:
22#     (none): same as even except -inpck instead of inpck for login.
23#     ep:     getty will use raw mode (cs8 -parenb) (unless rw is set) and
24#             fake parity.  login will use even parity (cs7 parenb -parodd).
25#     op:     same as ep except odd parity (cs7 parenb parodd) for login.
26#             op overrides ep.
27#     ap:     same as ep except -inpck instead of inpck for login.
28#             ap overrides op and ep.
29#     np:     1. don't fake parity in getty.  The fake parity garbles
30#                characters on non-terminals (like pccons) that don't
31#                support parity.  It would probably better for getty not to
32#                try to fake parity.  It could just use cbreak mode so as
33#                not to force cs8 and let the hardware handle the parity.
34#                login has to be rely on the hardware anyway.
35#             2. set PASS8, giving cs8 -parenb -istrip -inpck.
36#     np:ep:  same as np except inpck.
37#     np:op:  same as np:ep except for parodd (but parodd is overridden).
38#     np:ap:  same as np except istrip.
39#
40default:\
41	:cb:ce:ck:lc:fd#1000:im=\r\n%s/%m (%h) (%t)\r\n\r\n:sp#1200:
42
43#
44# Fixed speed entries
45#
46#	The "std.NNN" names are known to the special case
47#	portselector code in getty, however they can
48#	be assigned to any table desired.
49#	The "NNN-baud" names are known to the special case
50#	autobaud code in getty, and likewise can
51#	be assigned to any table desired (hopefully the same speed).
52#
53a|std.110|110-baud:\
54	:np:nd#1:cd#1:uc:sp#110:
55b|std.134|134.5-baud:\
56	:np:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl:
571|std.150|150-baud:\
58	:np:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 :
59c|std.300|300-baud:\
60	:np:nd#1:cd#1:sp#300:
61d|std.600|600-baud:\
62	:np:nd#1:cd#1:sp#600:
63f|std.1200|1200-baud:\
64	:np:fd#1:sp#1200:
656|std.2400|2400-baud:\
66	:np:sp#2400:
677|std.4800|4800-baud:\
68	:np:sp#4800:
692|std.9600|9600-baud:\
70	:np:sp#9600:
71g|std.19200|19200-baud:\
72	:np:sp#19200:
73std.38400|38400-baud:\
74	:np:sp#38400:
75std.57600|57600-baud:\
76	:np:sp#57600:
77std.115200|115200-baud:\
78	:np:sp#115200:
79std.230400|230400-baud:\
80	:np:sp#230400:
81
82#
83# Entry specifying explicit device settings.  See termios(4) and
84# /usr/include/termios.h, too.  The entry forces the tty into
85# CLOCAL mode (so no DCD is required), and uses Xon/Xoff flow control.
86#
87# cflags: CLOCAL | HUPCL | CREAD | CS8
88# oflags: OPOST | ONLCR | OXTABS
89# iflags: IXOFF | IXON | ICRNL | IGNPAR
90# lflags: IEXTEN | ICANON | ISIG | ECHOCTL | ECHO | ECHOK | ECHOE | ECHOKE
91#
92# The `0' flags don't have input enabled.  The `1' flags don't echo.
93# (Echoing is done inside getty itself.)
94#
95local.9600|CLOCAL tty @ 9600 Bd:\
96	:c0#0x0000c300:c1#0x0000cb00:c2#0x0000cb00:\
97	:o0#0x00000007:o1#0x00000002:o2#0x00000007:\
98	:i0#0x00000704:i1#0x00000000:i2#0x00000704:\
99	:l0#0x000005cf:l1#0x00000000:l2#0x000005cf:\
100	:sp#9600:
101
102#
103# Dial in rotary tables, speed selection via 'break'
104#
1050|d300|Dial-300:\
106	:nx=d1200:cd#2:sp#300:
107d1200|Dial-1200:\
108	:nx=d150:fd#1:sp#1200:
109d150|Dial-150:\
110	:nx=d110:lm@:tc=150-baud:
111d110|Dial-110:\
112	:nx=d300:tc=300-baud:
113
114#
115# Fast dialup terminals, 2400/1200/300 rotary (can start either way)
116#
117D2400|d2400|Fast-Dial-2400:\
118	:nx=D1200:tc=2400-baud:
1193|D1200|Fast-Dial-1200:\
120	:nx=D300:tc=1200-baud:
1215|D300|Fast-Dial-300:\
122	:nx=D2400:tc=300-baud:
123
124#
125#telebit (19200)
126#
127t19200:\
128	:nx=t2400:tc=19200-baud:
129t2400:\
130	:nx=t1200:tc=2400-baud:
131t1200:\
132	:nx=t19200:tc=1200-baud:
133
134#
135#telebit (9600)
136#
137t9600:\
138	:nx=t2400a:tc=9600-baud:
139t2400a:\
140	:nx=t1200a:tc=2400-baud:
141t1200a:\
142	:nx=t9600:tc=1200-baud:
143
144#
145# Odd special case terminals
146#
147-|tty33|asr33|Pity the poor user of this beast:\
148	:tc=110-baud:
149
1504|Console|Console Decwriter II:\
151	:nd@:cd@:rw:tc=300-baud:
152
153e|Console-1200|Console Decwriter III:\
154	:fd@:nd@:cd@:rw:tc=1200-baud:
155
156i|Interdata console:\
157	:uc:sp#0:
158
159l|lsi chess terminal:\
160	:sp#300:
161
162X|Xwindow|X window system:\
163	:fd@:nd@:cd@:rw:sp#9600:
164
165P|Pc|Pc console:\
166	:ht:np:sp#115200:
167
168#
169# Wierdo special case for fast crt's with hardcopy devices
170#
1718|T9600|CRT with hardcopy:\
172	:nx=T300:tc=9600-baud:
1739|T300|CRT with hardcopy (300):\
174	:nx=T9600:tc=300-baud:
175
176#
177# Plugboard, and misc other terminals
178#
179plug-9600|Plugboard-9600:\
180	:pf#1:tc=9600-baud:
181p|P9600|Plugboard-9600-rotary:\
182	:pf#1:nx=P300:tc=9600-baud:
183q|P300|Plugboard-300:\
184	:pf#1:nx=P1200:tc=300-baud:
185r|P1200|Plugboard-1200:\
186	:pf#1:nx=P9600:tc=1200-baud:
187
188#
189# XXXX Port selector
190#
191s|DSW|Port Selector:\
192	:ps:sp#2400:
193
194#
195# Auto-baud speed detect entry for Micom 600.
196# Special code in getty will switch this out
197# to one of the NNN-baud entries.
198#
199A|Auto-baud:\
200	:ab:sp#2400:f0#040:
201
202#
203# autologin - automatically log in as root
204#
205
206autologin|al.9600:\
207	:al=root:tc=std.9600:
208