Makefile.inc1 revision 125261
1# 2# $FreeBSD: head/Makefile.inc1 125261 2004-01-31 08:15:57Z ru $ 3# 4# Make command line options: 5# -DNO_DYNAMICROOT do not link /bin and /sbin dynamically 6# -DNO_KERBEROS Do not build Heimdal (Kerberos 5) 7# -DNO_RESCUE do not build rescue binaries 8# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir 9# -DNOCLEAN do not clean at all 10# -DNOCRYPT will prevent building of crypt versions 11# -DNOMAN do not build the manual pages 12# -DNOPROFILE do not build profiled libraries 13# -DNOGAMES do not go into games subdir 14# -DNOSHARE do not go into share subdir 15# -DNOINFO do not make or install info files 16# -DNOLIBC_R do not build libc_r. 17# -DNO_FORTRAN do not build g77 and related libraries. 18# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel 19# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel 20# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel 21# -DNO_PORTSUPDATE do not update ports in ${MAKE} update 22# -DNO_DOCUPDATE do not update doc in ${MAKE} update 23# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list 24# TARGET_ARCH="arch" to crossbuild world to a different arch 25 26# 27# The intended user-driven targets are: 28# buildworld - rebuild *everything*, including glue to help do upgrades 29# installworld- install everything built by "buildworld" 30# update - convenient way to update your source tree (eg: sup/cvs) 31# 32# Standard targets (not defined here) are documented in the makefiles in 33# /usr/share/mk. These include: 34# obj depend all install clean cleandepend cleanobj 35 36# Put initial settings here. 37SUBDIR= 38 39# We must do share/info early so that installation of info `dir' 40# entries works correctly. Do it first since it is less likely to 41# grow dependencies on include and lib than vice versa. 42.if exists(${.CURDIR}/share/info) 43SUBDIR+= share/info 44.endif 45 46.if exists(${.CURDIR}/include) 47SUBDIR+= include 48.endif 49 50# We must do lib and libexec before bin, because if installworld 51# installs a new /bin/sh, the 'make' command will *immediately* 52# use that new version. And the new (dynamically-linked) /bin/sh 53# will expect to find appropriate libraries in /lib and /libexec. 54.if exists(${.CURDIR}/lib) 55SUBDIR+= lib 56.endif 57.if exists(${.CURDIR}/libexec) 58SUBDIR+= libexec 59.endif 60 61.if exists(${.CURDIR}/bin) 62SUBDIR+= bin 63.endif 64.if exists(${.CURDIR}/games) && !defined(NOGAMES) 65SUBDIR+= games 66.endif 67.if exists(${.CURDIR}/gnu) 68SUBDIR+= gnu 69.endif 70.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 71 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 72SUBDIR+= kerberos5 73.endif 74.if exists(${.CURDIR}/rescue) && !defined(NO_RESCUE) 75SUBDIR+= rescue 76.endif 77.if exists(${.CURDIR}/sbin) 78SUBDIR+= sbin 79.endif 80.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) 81SUBDIR+= secure 82.endif 83.if exists(${.CURDIR}/share) && !defined(NOSHARE) 84SUBDIR+= share 85.endif 86.if exists(${.CURDIR}/sys) 87SUBDIR+= sys 88.endif 89.if exists(${.CURDIR}/usr.bin) 90SUBDIR+= usr.bin 91.endif 92.if exists(${.CURDIR}/usr.sbin) 93SUBDIR+= usr.sbin 94.endif 95 96# etc must be last for install/distribute to work 97.if exists(${.CURDIR}/etc) 98SUBDIR+= etc 99.endif 100 101# These are last, since it is nice to at least get the base system 102# rebuilt before you do them. 103.if defined(LOCAL_DIRS) 104.for _DIR in ${LOCAL_DIRS} 105.if exists(${.CURDIR}/${_DIR}) && exists(${.CURDIR}/${_DIR}/Makefile) 106SUBDIR+= ${_DIR} 107.endif 108.endfor 109.endif 110 111.if defined(SUBDIR_OVERRIDE) 112SUBDIR= ${SUBDIR_OVERRIDE} 113.endif 114 115.if defined(NOCLEANDIR) 116CLEANDIR= clean cleandepend 117.else 118CLEANDIR= cleandir 119.endif 120 121CVS?= cvs 122SUP?= /usr/local/bin/cvsup 123SUPFLAGS?= -g -L 2 -P - 124.if defined(SUPHOST) 125SUPFLAGS+= -h ${SUPHOST} 126.endif 127 128MAKEOBJDIRPREFIX?= /usr/obj 129.if !defined(OSRELDATE) 130.if exists(/usr/include/osreldate.h) 131OSRELDATE!= awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \ 132 /usr/include/osreldate.h 133.else 134OSRELDATE= 0 135.endif 136.endif 137TARGET_ARCH?= ${MACHINE_ARCH} 138.if ${TARGET_ARCH} == ${MACHINE_ARCH} 139TARGET?= ${MACHINE} 140TARGET_CPUTYPE?=${CPUTYPE} 141.else 142TARGET?= ${TARGET_ARCH} 143TARGET_CPUTYPE?= 144.endif 145.if !empty(TARGET_CPUTYPE) 146_TARGET_CPUTYPE=${TARGET_CPUTYPE} 147.else 148_TARGET_CPUTYPE=dummy 149.endif 150_CPUTYPE!= ${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \ 151 CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE 152.if ${_CPUTYPE} != ${_TARGET_CPUTYPE} 153.error CPUTYPE global should be set with ?=. 154.endif 155.if make(buildworld) 156BUILD_ARCH!= sysctl -n hw.machine_arch 157.if ${MACHINE_ARCH} != ${BUILD_ARCH} 158.error To cross-build, set TARGET_ARCH. 159.endif 160.endif 161.if ${MACHINE} == ${TARGET} 162OBJTREE= ${MAKEOBJDIRPREFIX} 163.else 164OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET} 165.endif 166WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH} 167# /usr/games added for fortune which depend on strfile 168BPATH= ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games 169XPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games 170STRICTTMPPATH= ${BPATH}:${XPATH} 171TMPPATH= ${STRICTTMPPATH}:${PATH} 172 173INSTALLTMP!= /usr/bin/mktemp -d -u -t install 174 175# 176# Building a world goes through the following stages 177# 178# 1. legacy stage [BMAKE] 179# This stage is responsible for creating compatibility 180# shims that are needed by the bootstrap-tools, 181# build-tools and cross-tools stages. 182# 1. bootstrap-tools stage [BMAKE] 183# This stage is responsible for creating programs that 184# are needed for backward compatibility reasons. They 185# are not built as cross-tools. 186# 2. build-tools stage [TMAKE] 187# This stage is responsible for creating the object 188# tree and building any tools that are needed during 189# the build process. 190# 3. cross-tools stage [XMAKE] 191# This stage is responsible for creating any tools that 192# are needed for cross-builds. A cross-compiler is one 193# of them. 194# 4. world stage [WMAKE] 195# This stage actually builds the world. 196# 5. install stage (optional) [IMAKE] 197# This stage installs a previously built world. 198# 199 200BOOTSTRAPPING?= 0 201 202# Common environment for world related stages 203CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \ 204 MACHINE_ARCH=${TARGET_ARCH} \ 205 MACHINE=${TARGET} \ 206 CPUTYPE=${TARGET_CPUTYPE} \ 207 GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \ 208 GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \ 209 GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac 210 211# bootstrap-tools stage 212BMAKEENV= DESTDIR= \ 213 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 214 PATH=${BPATH}:${PATH} \ 215 WORLDTMP=${WORLDTMP} \ 216 MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}" 217BMAKE= MAKEOBJDIRPREFIX=${WORLDTMP} \ 218 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 219 BOOTSTRAPPING=${OSRELDATE} \ 220 -DNOHTML -DNOINFO -DNOLINT -DNOMAN -DNOPIC -DNOPROFILE \ 221 -DNOSHARED -DNO_CPU_CFLAGS -DNO_WARNS 222 223# build-tools stage 224TMAKE= MAKEOBJDIRPREFIX=${OBJTREE} \ 225 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 226 BOOTSTRAPPING=${OSRELDATE} -DNOLINT -DNO_CPU_CFLAGS -DNO_WARNS 227 228# cross-tools stage 229XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB 230 231# world stage 232WMAKEENV= ${CROSSENV} \ 233 DESTDIR=${WORLDTMP} \ 234 _SHLIBDIRPREFIX=${WORLDTMP} \ 235 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 236 PATH=${TMPPATH} 237WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 238 239# install stage 240IMAKEENV= ${CROSSENV} \ 241 PATH=${STRICTTMPPATH}:${INSTALLTMP} 242IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 243 244# kernel stage 245KMAKEENV= ${WMAKEENV} 246 247# 248# buildworld 249# 250# Attempt to rebuild the entire system, with reasonable chance of 251# success, regardless of how old your existing system is. 252# 253_worldtmp: 254.if ${.CURDIR:C/[^,]//g} != "" 255# The m4 build of sendmail files doesn't like it if ',' is used 256# anywhere in the path of it's files. 257 @echo 258 @echo "*** Error: path to source tree contains a comma ','" 259 @echo 260 @false 261.endif 262 @echo 263 @echo "--------------------------------------------------------------" 264 @echo ">>> Rebuilding the temporary build tree" 265 @echo "--------------------------------------------------------------" 266.if !defined(NOCLEAN) 267 rm -rf ${WORLDTMP} 268.else 269 rm -rf ${WORLDTMP}/legacy/usr/include 270 # XXX - These two can depend on any header file. 271 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 272 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 273.endif 274.for _dir in \ 275 usr/bin usr/games usr/include/c++/3.3 usr/include/sys usr/lib \ 276 usr/libexec usr/sbin usr/share/dict \ 277 usr/share/groff_font/devX100 \ 278 usr/share/groff_font/devX100-12 \ 279 usr/share/groff_font/devX75 \ 280 usr/share/groff_font/devX75-12 \ 281 usr/share/groff_font/devascii \ 282 usr/share/groff_font/devcp1047 \ 283 usr/share/groff_font/devdvi \ 284 usr/share/groff_font/devhtml \ 285 usr/share/groff_font/devkoi8-r \ 286 usr/share/groff_font/devlatin1 \ 287 usr/share/groff_font/devlbp \ 288 usr/share/groff_font/devlj4 \ 289 usr/share/groff_font/devps \ 290 usr/share/groff_font/devutf8 \ 291 usr/share/tmac/mdoc usr/share/tmac/mm 292 mkdir -p ${WORLDTMP}/legacy/${_dir} 293.endfor 294.for _dir in \ 295 lib usr/bin usr/include usr/lib/compat/aout usr/libdata/ldscripts \ 296 usr/libexec usr/share/misc usr/share/bsnmp/defs usr/share/bsnmp/mibs 297 mkdir -p ${WORLDTMP}/${_dir} 298.endfor 299 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ 300 -p ${WORLDTMP}/usr/include 301 ln -sf ${.CURDIR}/sys ${WORLDTMP} 302_legacy: 303 @echo 304 @echo "--------------------------------------------------------------" 305 @echo ">>> stage 1.1: legacy release compatibility shims" 306 @echo "--------------------------------------------------------------" 307 cd ${.CURDIR}; ${BMAKE} legacy 308_bootstrap-tools: 309 @echo 310 @echo "--------------------------------------------------------------" 311 @echo ">>> stage 1.2: bootstrap tools" 312 @echo "--------------------------------------------------------------" 313 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 314_cleanobj: 315.if !defined(NOCLEAN) 316 @echo 317 @echo "--------------------------------------------------------------" 318 @echo ">>> stage 2.1: cleaning up the object tree" 319 @echo "--------------------------------------------------------------" 320 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 321.endif 322_obj: 323 @echo 324 @echo "--------------------------------------------------------------" 325 @echo ">>> stage 2.2: rebuilding the object tree" 326 @echo "--------------------------------------------------------------" 327 cd ${.CURDIR}; ${WMAKE} par-obj 328_build-tools: 329 @echo 330 @echo "--------------------------------------------------------------" 331 @echo ">>> stage 2.3: build tools" 332 @echo "--------------------------------------------------------------" 333 cd ${.CURDIR}; ${TMAKE} build-tools 334_cross-tools: 335 @echo 336 @echo "--------------------------------------------------------------" 337 @echo ">>> stage 3: cross tools" 338 @echo "--------------------------------------------------------------" 339 cd ${.CURDIR}; ${XMAKE} cross-tools 340_includes: 341 @echo 342 @echo "--------------------------------------------------------------" 343 @echo ">>> stage 4.1: building includes" 344 @echo "--------------------------------------------------------------" 345 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 346_libraries: 347 @echo 348 @echo "--------------------------------------------------------------" 349 @echo ">>> stage 4.2: building libraries" 350 @echo "--------------------------------------------------------------" 351 cd ${.CURDIR}; \ 352 ${WMAKE} -DNOFSCHG -DNOHTML -DNOINFO -DNOLINT -DNOMAN -DNOPROFILE \ 353 libraries 354_depend: 355 @echo 356 @echo "--------------------------------------------------------------" 357 @echo ">>> stage 4.3: make dependencies" 358 @echo "--------------------------------------------------------------" 359 cd ${.CURDIR}; ${WMAKE} par-depend 360everything: 361 @echo 362 @echo "--------------------------------------------------------------" 363 @echo ">>> stage 4.4: building everything.." 364 @echo "--------------------------------------------------------------" 365 cd ${.CURDIR}; ${WMAKE} par-all 366 367 368WMAKE_TGTS= 369.if !defined(SUBDIR_OVERRIDE) 370WMAKE_TGTS+= _worldtmp _legacy _bootstrap-tools 371.endif 372WMAKE_TGTS+= _cleanobj _obj _build-tools 373.if !defined(SUBDIR_OVERRIDE) 374WMAKE_TGTS+= _cross-tools 375.endif 376WMAKE_TGTS+= _includes _libraries _depend everything 377 378buildworld: ${WMAKE_TGTS} 379.ORDER: ${WMAKE_TGTS} 380 381# 382# installcheck 383# 384# Checks to be sure system is ready for installworld 385# 386installcheck: 387.if !defined(NO_SENDMAIL) 388 @if ! `id -u smmsp > /dev/null`; then \ 389 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \ 390 false; \ 391 fi 392 @if ! `id -g smmsp > /dev/null`; then \ 393 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \ 394 false; \ 395 fi 396.endif 397 398# 399# distributeworld 400# 401# Distributes everything compiled by a `buildworld'. 402# 403# installworld 404# 405# Installs everything compiled by a 'buildworld'. 406# 407distributeworld installworld: installcheck 408 mkdir -p ${INSTALLTMP} 409 for prog in [ awk cap_mkdb cat chflags chmod chown \ 410 date echo egrep find grep \ 411 ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \ 412 test true uname wc zic; do \ 413 cp `which $$prog` ${INSTALLTMP}; \ 414 done 415 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 416 rm -rf ${INSTALLTMP} 417 418# 419# reinstall 420# 421# If you have a build server, you can NFS mount the source and obj directories 422# and do a 'make reinstall' on the *client* to install new binaries from the 423# most recent server build. 424# 425reinstall: 426 @echo "--------------------------------------------------------------" 427 @echo ">>> Making hierarchy" 428 @echo "--------------------------------------------------------------" 429 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 430 @echo 431 @echo "--------------------------------------------------------------" 432 @echo ">>> Installing everything.." 433 @echo "--------------------------------------------------------------" 434 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 435 436redistribute: 437 @echo "--------------------------------------------------------------" 438 @echo ">>> Distributing everything.." 439 @echo "--------------------------------------------------------------" 440 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute 441 442# 443# buildkernel and installkernel 444# 445# Which kernels to build and/or install is specified by setting 446# KERNCONF. If not defined a GENERIC kernel is built/installed. 447# Only the existing (depending TARGET) config files are used 448# for building kernels and only the first of these is designated 449# as the one being installed. 450# 451# Note that we have to use TARGET instead of TARGET_ARCH when 452# we're in kernel-land. Since only TARGET_ARCH is (expected) to 453# be set to cross-build, we have to make sure TARGET is set 454# properly. 455 456.if !defined(KERNCONF) && defined(KERNEL) 457KERNCONF= ${KERNEL} 458KERNWARN= yes 459.else 460KERNCONF?= GENERIC 461.endif 462INSTKERNNAME?= kernel 463 464KERNSRCDIR?= ${.CURDIR}/sys 465KRNLCONFDIR= ${KERNSRCDIR}/${TARGET}/conf 466KRNLOBJDIR= ${OBJTREE}${KERNSRCDIR} 467KERNCONFDIR?= ${KRNLCONFDIR} 468 469BUILDKERNELS= 470INSTALLKERNEL= 471.for _kernel in ${KERNCONF} 472.if exists(${KERNCONFDIR}/${_kernel}) 473BUILDKERNELS+= ${_kernel} 474.if empty(INSTALLKERNEL) 475INSTALLKERNEL= ${_kernel} 476.endif 477.endif 478.endfor 479 480# 481# buildkernel 482# 483# Builds all kernels defined by BUILDKERNELS. 484# 485buildkernel: 486.if empty(BUILDKERNELS) 487 @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF})."; 488 @false 489.endif 490.if defined(KERNWARN) 491 @echo "--------------------------------------------------------------" 492 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 493 @echo "--------------------------------------------------------------" 494 @sleep 3 495.endif 496 @echo 497.for _kernel in ${BUILDKERNELS} 498 @echo "--------------------------------------------------------------" 499 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 500 @echo "--------------------------------------------------------------" 501 @echo "===> ${_kernel}" 502 mkdir -p ${KRNLOBJDIR} 503.if !defined(NO_KERNELCONFIG) 504 cd ${KRNLCONFDIR}; \ 505 PATH=${TMPPATH} \ 506 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 507 ${KERNCONFDIR}/${_kernel} 508.endif 509.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 510 cd ${KRNLOBJDIR}/${_kernel}; \ 511 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${CLEANDIR} 512.endif 513 cd ${KRNLOBJDIR}/${_kernel}; \ 514 MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \ 515 ${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile 516 cd ${KRNLOBJDIR}/${_kernel}; \ 517 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} obj 518# XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case. 519.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules) 520.for target in obj depend all 521 cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \ 522 MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \ 523 ${MAKE} -DNO_CPU_CFLAGS ${target} 524.endfor 525.endif 526.if !defined(NO_KERNELDEPEND) 527 cd ${KRNLOBJDIR}/${_kernel}; \ 528 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ 529.endif 530 cd ${KRNLOBJDIR}/${_kernel}; \ 531 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ 532 @echo "--------------------------------------------------------------" 533 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 534 @echo "--------------------------------------------------------------" 535.endfor 536 537# 538# installkernel 539# 540# Install the kernel defined by INSTALLKERNEL 541# 542installkernel reinstallkernel installkernel.debug reinstallkernel.debug: 543.if empty(INSTALLKERNEL) 544 @echo "ERROR: No kernel \"${KERNCONF}\" to install." 545 @false 546.endif 547 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 548 ${CROSSENV} PATH=${TMPPATH} \ 549 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel//} 550 551# 552# update 553# 554# Update the source tree, by running sup and/or running cvs to update to the 555# latest copy. 556# 557update: 558.if defined(SUP_UPDATE) 559 @echo "--------------------------------------------------------------" 560 @echo ">>> Running ${SUP}" 561 @echo "--------------------------------------------------------------" 562.if defined(SUPFILE) 563 @${SUP} ${SUPFLAGS} ${SUPFILE} 564.endif 565.if defined(SUPFILE1) 566 @${SUP} ${SUPFLAGS} ${SUPFILE1} 567.endif 568.if defined(SUPFILE2) 569 @${SUP} ${SUPFLAGS} ${SUPFILE2} 570.endif 571.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE) 572 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE} 573.endif 574.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE) 575 @${SUP} ${SUPFLAGS} ${DOCSUPFILE} 576.endif 577.endif 578.if defined(CVS_UPDATE) 579 @echo "--------------------------------------------------------------" 580 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT} 581 @echo "--------------------------------------------------------------" 582 cd ${.CURDIR}; ${CVS} -R -q update -A -P -d 583.endif 584 585# 586# ------------------------------------------------------------------------ 587# 588# From here onwards are utility targets used by the 'make world' and 589# related targets. If your 'world' breaks, you may like to try to fix 590# the problem and manually run the following targets to attempt to 591# complete the build. Beware, this is *not* guaranteed to work, you 592# need to have a pretty good grip on the current state of the system 593# to attempt to manually finish it. If in doubt, 'make world' again. 594# 595 596# 597# legacy: Build compatibility shims for the next three targets 598# 599legacy: 600.for _tool in tools/build 601 @${ECHODIR} "===> ${_tool}"; \ 602 cd ${.CURDIR}/${_tool}; \ 603 ${MAKE} DIRPRFX=${_tool}/ obj; \ 604 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \ 605 ${MAKE} DIRPRFX=${_tool}/ depend; \ 606 ${MAKE} DIRPRFX=${_tool}/ all; \ 607 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install 608.endfor 609 610# 611# bootstrap-tools: Build tools needed for compatibility 612# 613.if exists(${.CURDIR}/games) && !defined(NOGAMES) 614_strfile= games/fortune/strfile 615.endif 616 617.if !defined(NO_CXX) 618_gperf= gnu/usr.bin/gperf 619.if ${BOOTSTRAPPING} < 500113 620_groff= gnu/usr.bin/groff 621.else 622_groff= gnu/usr.bin/groff/tmac 623.endif 624.endif 625 626.if ${BOOTSTRAPPING} < 502102 627_lex= usr.bin/lex 628.endif 629 630.if ${BOOTSTRAPPING} < 450005 || \ 631 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500034 632_uudecode= usr.bin/uudecode 633.endif 634 635.if ${BOOTSTRAPPING} < 430002 || \ 636 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500019 637_xargs= usr.bin/xargs 638.endif 639 640.if ${BOOTSTRAPPING} < 430002 || \ 641 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500018 642_yacc= usr.bin/yacc 643.endif 644 645.if !defined(NO_RESCUE) && \ 646 ${BOOTSTRAPPING} < 501100 647_crunchgen= usr.sbin/crunch/crunchgen 648.endif 649 650.if ${BOOTSTRAPPING} < 501114 651_gensnmptree= usr.sbin/bsnmpd/gensnmptree 652.endif 653 654.if ${BOOTSTRAPPING} < 500019 655_kbdcontrol= usr.sbin/kbdcontrol 656.endif 657 658bootstrap-tools: 659.for _tool in \ 660 ${_strfile} \ 661 ${_gperf} \ 662 ${_groff} \ 663 gnu/usr.bin/texinfo \ 664 usr.bin/colldef \ 665 ${_lex} \ 666 usr.bin/makewhatis \ 667 usr.bin/rpcgen \ 668 ${_uudecode} \ 669 ${_xargs} \ 670 usr.bin/xinstall \ 671 ${_yacc} \ 672 usr.sbin/config \ 673 ${_crunchgen} \ 674 ${_gensnmptree} \ 675 ${_kbdcontrol} 676 @${ECHODIR} "===> ${_tool}"; \ 677 cd ${.CURDIR}/${_tool}; \ 678 ${MAKE} DIRPRFX=${_tool}/ obj; \ 679 ${MAKE} DIRPRFX=${_tool}/ depend; \ 680 ${MAKE} DIRPRFX=${_tool}/ all; \ 681 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install 682.endfor 683 684# 685# build-tools: Build special purpose build tools 686# 687.if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules) 688_aicasm= sys/modules/aic7xxx/aicasm 689.endif 690 691.if exists(${.CURDIR}/share) && !defined(NOSHARE) 692_share= share/syscons/scrnmaps 693.endif 694 695.if !defined(NO_FORTRAN) 696_fortran= gnu/usr.bin/cc/f771 697.endif 698 699.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 700 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 701_kerberos5_tools= kerberos5/tools 702.endif 703 704.if exists(${.CURDIR}/rescue) && !defined(NO_RESCUE) 705_rescue= rescue/rescue 706.endif 707 708build-tools: 709.for _tool in \ 710 bin/csh \ 711 bin/sh \ 712 ${_rescue} \ 713 gnu/usr.bin/cc/cc_tools \ 714 ${_fortran} \ 715 lib/libncurses \ 716 ${_share} \ 717 ${_aicasm} \ 718 usr.bin/awk \ 719 usr.bin/file \ 720 usr.sbin/sysinstall 721 @${ECHODIR} "===> ${_tool}"; \ 722 cd ${.CURDIR}/${_tool}; \ 723 ${MAKE} DIRPRFX=${_tool}/ obj; \ 724 ${MAKE} DIRPRFX=${_tool}/ build-tools 725.endfor 726.for _tool in \ 727 ${_kerberos5_tools} 728 @${ECHODIR} "===> ${_tool}"; \ 729 cd ${.CURDIR}/${_tool}; \ 730 ${MAKE} DIRPRFX=${_tool}/ obj; \ 731 ${MAKE} DIRPRFX=${_tool}/ depend; \ 732 ${MAKE} DIRPRFX=${_tool}/ all 733.endfor 734 735# 736# cross-tools: Build cross-building tools 737# 738.if ${TARGET_ARCH} == "sparc64" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \ 739 ${BOOTSTRAPPING} < 500037 740_elf2aout= usr.bin/elf2aout 741.endif 742 743.if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} 744_btxld= usr.sbin/btxld 745.endif 746 747.if (!defined(NO_RESCUE) || \ 748 defined(RELEASEDIR)) && \ 749 (${TARGET_ARCH} != ${MACHINE_ARCH} || ${BOOTSTRAPPING} < 501101) 750_crunchide= usr.sbin/crunch/crunchide 751.endif 752 753.if ${TARGET_ARCH} == "alpha" && ${TARGET_ARCH} != ${MACHINE_ARCH} 754_elf2exe= usr.sbin/elf2exe 755.endif 756 757.if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \ 758 defined(RELEASEDIR) 759_kgzip= usr.sbin/kgzip 760.endif 761 762cross-tools: 763.for _tool in \ 764 gnu/usr.bin/binutils \ 765 gnu/usr.bin/cc \ 766 ${_elf2aout} \ 767 usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint \ 768 ${_btxld} \ 769 ${_crunchide} \ 770 ${_elf2exe} \ 771 ${_kgzip} 772 @${ECHODIR} "===> ${_tool}"; \ 773 cd ${.CURDIR}/${_tool}; \ 774 ${MAKE} DIRPRFX=${_tool}/ obj; \ 775 ${MAKE} DIRPRFX=${_tool}/ depend; \ 776 ${MAKE} DIRPRFX=${_tool}/ all; \ 777 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 778.endfor 779 780# 781# hierarchy - ensure that all the needed directories are present 782# 783hierarchy: 784 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 785 786# 787# libraries - build all libraries, and install them under ${DESTDIR}. 788# 789# The list of libraries with dependents (${_prebuild_libs}) and their 790# interdependencies (__L) are built automatically by the 791# ${.CURDIR}/tools/make_libdeps.sh script. 792# 793libraries: 794 cd ${.CURDIR}; \ 795 ${MAKE} -f Makefile.inc1 _startup_libs; \ 796 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 797 ${MAKE} -f Makefile.inc1 _generic_libs; 798 799# These dependencies are not automatically generated: 800# 801# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all 802# shared libraries for ELF. 803# 804_startup_libs= gnu/lib/csu gnu/lib/libgcc 805.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf) 806_startup_libs+= lib/csu/${MACHINE_ARCH}-elf 807.else 808_startup_libs+= lib/csu/${MACHINE_ARCH} 809.endif 810 811_prebuild_libs= 812 813_generic_libs= gnu/lib 814 815.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 816 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 817_prebuild_libs+= kerberos5/lib/libasn1 818_prebuild_libs+= kerberos5/lib/libgssapi 819_prebuild_libs+= kerberos5/lib/libkrb5 820_prebuild_libs+= kerberos5/lib/libroken 821_generic_libs+= kerberos5/lib 822.endif 823 824_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libexpat \ 825 lib/libkvm lib/libmd \ 826 lib/libncurses lib/libnetgraph lib/libopie lib/libpam \ 827 lib/libradius lib/librpcsvc \ 828 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \ 829 lib/libz lib/msun 830 831lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 832lib/libypclnt__L: lib/librpcsvc__L 833 834_generic_libs+= lib 835 836.if !defined(NOCRYPT) 837.if !defined(NO_OPENSSL) 838_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl 839.if !defined(NO_OPENSSH) 840_prebuild_libs+= secure/lib/libssh 841secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L 842.endif 843.endif 844_generic_libs+= secure/lib 845.endif 846 847_generic_libs+= usr.bin/lex/lib 848 849.if ${MACHINE_ARCH} == "i386" 850_generic_libs+= usr.sbin/pcvt/keycap 851.endif 852 853.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs} 854${_lib}__L: .PHONY 855.if exists(${.CURDIR}/${_lib}) 856 @${ECHODIR} "===> ${_lib}"; \ 857 cd ${.CURDIR}/${_lib}; \ 858 ${MAKE} DIRPRFX=${_lib}/ depend; \ 859 ${MAKE} DIRPRFX=${_lib}/ all; \ 860 ${MAKE} DIRPRFX=${_lib}/ install 861.endif 862.endfor 863 864# libpam is special: we need to build static PAM modules before 865# static PAM library, and dynamic PAM library before dynamic PAM 866# modules. 867lib/libpam__L: .PHONY 868 @${ECHODIR} "===> lib/libpam"; \ 869 cd ${.CURDIR}/lib/libpam; \ 870 ${MAKE} DIRPRFX=lib/libpam/ depend; \ 871 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \ 872 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install 873 874_startup_libs: ${_startup_libs:S/$/__L/} 875_prebuild_libs: ${_prebuild_libs:S/$/__L/} 876_generic_libs: ${_generic_libs:S/$/__L/} 877 878.for __target in all clean cleandepend cleandir depend includes obj 879.for entry in ${SUBDIR} 880${entry}.${__target}__D: .PHONY 881 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 882 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 883 edir=${entry}.${MACHINE_ARCH}; \ 884 cd ${.CURDIR}/$${edir}; \ 885 else \ 886 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 887 edir=${entry}; \ 888 cd ${.CURDIR}/$${edir}; \ 889 fi; \ 890 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 891.endfor 892par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 893.endfor 894 895.include <bsd.subdir.mk> 896