Makefile.inc1 revision 119846
1# 2# $FreeBSD: head/Makefile.inc1 119846 2003-09-07 14:15:40Z ru $ 3# 4# Make command line options: 5# -DNO_KERBEROS Do not build Heimdal (Kerberos 5) 6# -DNO_RESCUE do not build rescue binaries 7# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir 8# -DNOCLEAN do not clean at all 9# -DNOCRYPT will prevent building of crypt versions 10# -DNOMAN do not build the manual pages 11# -DNOPROFILE do not build profiled libraries 12# -DNOGAMES do not go into games subdir 13# -DNOSHARE do not go into share subdir 14# -DNOINFO do not make or install info files 15# -DNOLIBC_R do not build libc_r. 16# -DNO_FORTRAN do not build g77 and related libraries. 17# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel 18# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel 19# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel 20# -DNO_PORTSUPDATE do not update ports in ${MAKE} update 21# -DNO_DOCUPDATE do not update doc in ${MAKE} update 22# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list 23# TARGET_ARCH="arch" to crossbuild world to a different arch 24 25# 26# The intended user-driven targets are: 27# buildworld - rebuild *everything*, including glue to help do upgrades 28# installworld- install everything built by "buildworld" 29# update - convenient way to update your source tree (eg: sup/cvs) 30# most - build user commands, no libraries or include files 31# installmost - install user commands, no libraries or include files 32# 33# Standard targets (not defined here) are documented in the makefiles in 34# /usr/share/mk. These include: 35# obj depend all install clean cleandepend cleanobj 36 37# Put initial settings here. 38SUBDIR= 39 40# We must do share/info early so that installation of info `dir' 41# entries works correctly. Do it first since it is less likely to 42# grow dependencies on include and lib than vice versa. 43.if exists(${.CURDIR}/share/info) 44SUBDIR+= share/info 45.endif 46 47.if exists(${.CURDIR}/include) 48SUBDIR+= include 49.endif 50.if exists(${.CURDIR}/lib) 51SUBDIR+= lib 52.endif 53 54.if exists(${.CURDIR}/bin) 55SUBDIR+= bin 56.endif 57.if exists(${.CURDIR}/games) && !defined(NOGAMES) 58SUBDIR+= games 59.endif 60.if exists(${.CURDIR}/gnu) 61SUBDIR+= gnu 62.endif 63.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 64 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 65SUBDIR+= kerberos5 66.endif 67.if exists(${.CURDIR}/libexec) 68SUBDIR+= libexec 69.endif 70.if exists(${.CURDIR}/rescue) && !defined(NO_RESCUE) 71SUBDIR+= rescue 72.endif 73.if exists(${.CURDIR}/sbin) 74SUBDIR+= sbin 75.endif 76.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) 77SUBDIR+= secure 78.endif 79.if exists(${.CURDIR}/share) && !defined(NOSHARE) 80SUBDIR+= share 81.endif 82.if exists(${.CURDIR}/sys) 83SUBDIR+= sys 84.endif 85.if exists(${.CURDIR}/usr.bin) 86SUBDIR+= usr.bin 87.endif 88.if exists(${.CURDIR}/usr.sbin) 89SUBDIR+= usr.sbin 90.endif 91 92# etc must be last for "distribute" to work 93.if exists(${.CURDIR}/etc) 94SUBDIR+= etc 95.endif 96 97# These are last, since it is nice to at least get the base system 98# rebuilt before you do them. 99.if defined(LOCAL_DIRS) 100.for _DIR in ${LOCAL_DIRS} 101.if exists(${.CURDIR}/${_DIR}) && exists(${.CURDIR}/${_DIR}/Makefile) 102SUBDIR+= ${_DIR} 103.endif 104.endfor 105.endif 106 107.if defined(SUBDIR_OVERRIDE) 108SUBDIR= ${SUBDIR_OVERRIDE} 109.endif 110 111.if defined(NOCLEANDIR) 112CLEANDIR= clean cleandepend 113.else 114CLEANDIR= cleandir 115.endif 116 117CVS?= cvs 118SUP?= /usr/local/bin/cvsup 119SUPFLAGS?= -g -L 2 -P - 120.if defined(SUPHOST) 121SUPFLAGS+= -h ${SUPHOST} 122.endif 123 124MAKEOBJDIRPREFIX?= /usr/obj 125.if !defined(OSRELDATE) 126.if exists(/usr/include/osreldate.h) 127OSRELDATE!= awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \ 128 /usr/include/osreldate.h 129.else 130OSRELDATE= 0 131.endif 132.endif 133TARGET_ARCH?= ${MACHINE_ARCH} 134.if ${TARGET_ARCH} == ${MACHINE_ARCH} 135TARGET?= ${MACHINE} 136TARGET_CPUTYPE?=${CPUTYPE} 137.else 138TARGET?= ${TARGET_ARCH} 139TARGET_CPUTYPE?= 140.endif 141.if !empty(TARGET_CPUTYPE) 142_TARGET_CPUTYPE=${TARGET_CPUTYPE} 143.else 144_TARGET_CPUTYPE=dummy 145.endif 146_CPUTYPE!= ${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \ 147 CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE 148.if ${_CPUTYPE} != ${_TARGET_CPUTYPE} 149.error CPUTYPE global should be set with ?=. 150.endif 151.if make(buildworld) 152BUILD_ARCH!= sysctl -n hw.machine_arch 153.if ${MACHINE_ARCH} != ${BUILD_ARCH} 154.error To cross-build, set TARGET_ARCH. 155.endif 156.endif 157.if ${MACHINE} == ${TARGET} 158OBJTREE= ${MAKEOBJDIRPREFIX} 159.else 160OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET} 161.endif 162WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH} 163# /usr/games added for fortune which depend on strfile 164BPATH= ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games 165XPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games 166STRICTTMPPATH= ${BPATH}:${XPATH} 167TMPPATH= ${STRICTTMPPATH}:${PATH} 168 169INSTALLTMP!= /usr/bin/mktemp -d -u -t install 170 171# 172# Building a world goes through the following stages 173# 174# 1. legacy stage [BMAKE] 175# This stage is responsible for creating compatibility 176# shims that are needed by the bootstrap-tools, 177# build-tools and cross-tools stages. 178# 1. bootstrap-tools stage [BMAKE] 179# This stage is responsible for creating programs that 180# are needed for backward compatibility reasons. They 181# are not built as cross-tools. 182# 2. build-tools stage [TMAKE] 183# This stage is responsible for creating the object 184# tree and building any tools that are needed during 185# the build process. 186# 3. cross-tools stage [XMAKE] 187# This stage is responsible for creating any tools that 188# are needed for cross-builds. A cross-compiler is one 189# of them. 190# 4. world stage [WMAKE] 191# This stage actually builds the world. 192# 5. install stage (optional) [IMAKE] 193# This stage installs a previously built world. 194# 195 196BOOTSTRAPPING?= 0 197 198# Common environment for world related stages 199CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \ 200 MACHINE_ARCH=${TARGET_ARCH} \ 201 MACHINE=${TARGET} \ 202 CPUTYPE=${TARGET_CPUTYPE} \ 203 GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \ 204 GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \ 205 GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac 206 207# bootstrap-tools stage 208BMAKEENV= DESTDIR= \ 209 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 210 PATH=${BPATH}:${PATH} \ 211 WORLDTMP=${WORLDTMP} \ 212 MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}" 213BMAKE= MAKEOBJDIRPREFIX=${WORLDTMP} \ 214 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 215 BOOTSTRAPPING=${OSRELDATE} \ 216 -DNOHTML -DNOINFO -DNOLINT -DNOMAN -DNOPIC -DNOPROFILE \ 217 -DNOSHARED -DNO_CPU_CFLAGS -DNO_WARNS 218 219# build-tools stage 220TMAKE= MAKEOBJDIRPREFIX=${OBJTREE} \ 221 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 222 BOOTSTRAPPING=${OSRELDATE} -DNOLINT -DNO_CPU_CFLAGS -DNO_WARNS 223 224# cross-tools stage 225XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB 226 227# world stage 228WMAKEENV= ${CROSSENV} \ 229 DESTDIR=${WORLDTMP} \ 230 _SHLIBDIRPREFIX=${WORLDTMP} \ 231 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 232 PATH=${TMPPATH} 233WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 234 235# install stage 236IMAKEENV= ${CROSSENV} \ 237 PATH=${STRICTTMPPATH}:${INSTALLTMP} 238IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 239 240# kernel stage 241KMAKEENV= ${WMAKEENV} 242 243# 244# buildworld 245# 246# Attempt to rebuild the entire system, with reasonable chance of 247# success, regardless of how old your existing system is. 248# 249_worldtmp: 250.if ${.CURDIR:C/[^,]//g} != "" 251# The m4 build of sendmail files doesn't like it if ',' is used 252# anywhere in the path of it's files. 253 @echo 254 @echo "*** Error: path to source tree contains a comma ','" 255 @echo 256 @false 257.endif 258 @echo 259 @echo "--------------------------------------------------------------" 260 @echo ">>> Rebuilding the temporary build tree" 261 @echo "--------------------------------------------------------------" 262.if !defined(NOCLEAN) 263 rm -rf ${WORLDTMP} 264.else 265 rm -rf ${WORLDTMP}/legacy/usr/include 266 # XXX - These two can depend on any header file. 267 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 268 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 269.endif 270.for _dir in \ 271 usr/bin usr/games usr/include/sys usr/lib \ 272 usr/libexec usr/sbin usr/share/dict \ 273 usr/share/groff_font/devX100 \ 274 usr/share/groff_font/devX100-12 \ 275 usr/share/groff_font/devX75 \ 276 usr/share/groff_font/devX75-12 \ 277 usr/share/groff_font/devascii \ 278 usr/share/groff_font/devcp1047 \ 279 usr/share/groff_font/devdvi \ 280 usr/share/groff_font/devhtml \ 281 usr/share/groff_font/devkoi8-r \ 282 usr/share/groff_font/devlatin1 \ 283 usr/share/groff_font/devlbp \ 284 usr/share/groff_font/devlj4 \ 285 usr/share/groff_font/devps \ 286 usr/share/groff_font/devutf8 \ 287 usr/share/tmac/mdoc usr/share/tmac/mm 288 mkdir -p ${WORLDTMP}/legacy/${_dir} 289.endfor 290.for _dir in \ 291 lib usr/bin usr/include usr/lib/compat/aout usr/libdata/ldscripts \ 292 usr/libexec usr/share/misc 293 mkdir -p ${WORLDTMP}/${_dir} 294.endfor 295 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ 296 -p ${WORLDTMP}/usr/include 297 ln -sf ${.CURDIR}/sys ${WORLDTMP} 298_legacy: 299 @echo 300 @echo "--------------------------------------------------------------" 301 @echo ">>> stage 1.1: legacy release compatibility shims" 302 @echo "--------------------------------------------------------------" 303 cd ${.CURDIR}; ${BMAKE} legacy 304_bootstrap-tools: 305 @echo 306 @echo "--------------------------------------------------------------" 307 @echo ">>> stage 1.2: bootstrap tools" 308 @echo "--------------------------------------------------------------" 309 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 310_cleanobj: 311.if !defined(NOCLEAN) 312 @echo 313 @echo "--------------------------------------------------------------" 314 @echo ">>> stage 2.1: cleaning up the object tree" 315 @echo "--------------------------------------------------------------" 316 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 317.endif 318_obj: 319 @echo 320 @echo "--------------------------------------------------------------" 321 @echo ">>> stage 2.2: rebuilding the object tree" 322 @echo "--------------------------------------------------------------" 323 cd ${.CURDIR}; ${WMAKE} par-obj 324_build-tools: 325 @echo 326 @echo "--------------------------------------------------------------" 327 @echo ">>> stage 2.3: build tools" 328 @echo "--------------------------------------------------------------" 329 cd ${.CURDIR}; ${TMAKE} build-tools 330_cross-tools: 331 @echo 332 @echo "--------------------------------------------------------------" 333 @echo ">>> stage 3: cross tools" 334 @echo "--------------------------------------------------------------" 335 cd ${.CURDIR}; ${XMAKE} cross-tools 336_includes: 337 @echo 338 @echo "--------------------------------------------------------------" 339 @echo ">>> stage 4.1: populating ${WORLDTMP}/usr/include" 340 @echo "--------------------------------------------------------------" 341 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 342_libraries: 343 @echo 344 @echo "--------------------------------------------------------------" 345 @echo ">>> stage 4.2: building libraries" 346 @echo "--------------------------------------------------------------" 347 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG -DNOLINT \ 348 libraries 349_depend: 350 @echo 351 @echo "--------------------------------------------------------------" 352 @echo ">>> stage 4.3: make dependencies" 353 @echo "--------------------------------------------------------------" 354 cd ${.CURDIR}; ${WMAKE} par-depend 355everything: 356 @echo 357 @echo "--------------------------------------------------------------" 358 @echo ">>> stage 4.4: building everything.." 359 @echo "--------------------------------------------------------------" 360 cd ${.CURDIR}; ${WMAKE} par-all 361 362 363WMAKE_TGTS= 364.if !defined(SUBDIR_OVERRIDE) 365WMAKE_TGTS+= _worldtmp _legacy _bootstrap-tools 366.endif 367WMAKE_TGTS+= _cleanobj _obj _build-tools 368.if !defined(SUBDIR_OVERRIDE) 369WMAKE_TGTS+= _cross-tools 370.endif 371WMAKE_TGTS+= _includes _libraries _depend everything 372 373buildworld: ${WMAKE_TGTS} 374.ORDER: ${WMAKE_TGTS} 375 376# 377# installcheck 378# 379# Checks to be sure system is ready for installworld 380# 381installcheck: 382.if !defined(NO_SENDMAIL) 383 @if ! `id -u smmsp > /dev/null`; then \ 384 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \ 385 false; \ 386 fi 387 @if ! `id -g smmsp > /dev/null`; then \ 388 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \ 389 false; \ 390 fi 391.endif 392 393# 394# distributeworld 395# 396# Distributes everything compiled by a `buildworld'. 397# 398# installworld 399# 400# Installs everything compiled by a 'buildworld'. 401# 402distributeworld installworld: installcheck 403 mkdir -p ${INSTALLTMP} 404 for prog in [ awk cap_mkdb cat chflags chmod chown \ 405 date echo egrep find grep \ 406 ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \ 407 test true uname wc zic; do \ 408 cp `which $$prog` ${INSTALLTMP}; \ 409 done 410 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 411 rm -rf ${INSTALLTMP} 412 413# 414# reinstall 415# 416# If you have a build server, you can NFS mount the source and obj directories 417# and do a 'make reinstall' on the *client* to install new binaries from the 418# most recent server build. 419# 420reinstall: 421 @echo "--------------------------------------------------------------" 422 @echo ">>> Making hierarchy" 423 @echo "--------------------------------------------------------------" 424 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 425 @echo 426 @echo "--------------------------------------------------------------" 427 @echo ">>> Installing everything.." 428 @echo "--------------------------------------------------------------" 429 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 430.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN) 431 @echo 432 @echo "--------------------------------------------------------------" 433 @echo ">>> Rebuilding man page indices" 434 @echo "--------------------------------------------------------------" 435 cd ${.CURDIR}/share/man; ${MAKE} makedb 436.endif 437 438redistribute: 439 @echo "--------------------------------------------------------------" 440 @echo ">>> Distributing everything.." 441 @echo "--------------------------------------------------------------" 442 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute 443 444# 445# buildkernel and installkernel 446# 447# Which kernels to build and/or install is specified by setting 448# KERNCONF. If not defined a GENERIC kernel is built/installed. 449# Only the existing (depending TARGET) config files are used 450# for building kernels and only the first of these is designated 451# as the one being installed. 452# 453# Note that we have to use TARGET instead of TARGET_ARCH when 454# we're in kernel-land. Since only TARGET_ARCH is (expected) to 455# be set to cross-build, we have to make sure TARGET is set 456# properly. 457 458.if !defined(KERNCONF) && defined(KERNEL) 459KERNCONF= ${KERNEL} 460KERNWARN= yes 461.else 462KERNCONF?= GENERIC 463.endif 464INSTKERNNAME?= kernel 465 466KERNSRCDIR?= ${.CURDIR}/sys 467KRNLCONFDIR= ${KERNSRCDIR}/${TARGET}/conf 468KRNLOBJDIR= ${OBJTREE}${KERNSRCDIR} 469KERNCONFDIR?= ${KRNLCONFDIR} 470 471BUILDKERNELS= 472INSTALLKERNEL= 473.for _kernel in ${KERNCONF} 474.if exists(${KERNCONFDIR}/${_kernel}) 475BUILDKERNELS+= ${_kernel} 476.if empty(INSTALLKERNEL) 477INSTALLKERNEL= ${_kernel} 478.endif 479.endif 480.endfor 481 482# 483# buildkernel 484# 485# Builds all kernels defined by BUILDKERNELS. 486# 487buildkernel: 488.if empty(BUILDKERNELS) 489 @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF})."; 490 @false 491.endif 492.if defined(KERNWARN) 493 @echo "--------------------------------------------------------------" 494 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 495 @echo "--------------------------------------------------------------" 496 @sleep 3 497.endif 498 @echo 499.for _kernel in ${BUILDKERNELS} 500 @echo "--------------------------------------------------------------" 501 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 502 @echo "--------------------------------------------------------------" 503 @echo "===> ${_kernel}" 504 mkdir -p ${KRNLOBJDIR} 505.if !defined(NO_KERNELCONFIG) 506 cd ${KRNLCONFDIR}; \ 507 PATH=${TMPPATH} \ 508 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 509 ${KERNCONFDIR}/${_kernel} 510.endif 511.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 512 cd ${KRNLOBJDIR}/${_kernel}; \ 513 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${CLEANDIR} 514.endif 515 cd ${KRNLOBJDIR}/${_kernel}; \ 516 MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \ 517 ${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile 518 cd ${KRNLOBJDIR}/${_kernel}; \ 519 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} obj 520# XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case. 521.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules) 522.for target in obj depend all 523 cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \ 524 MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \ 525 ${MAKE} -DNO_CPU_CFLAGS ${target} 526.endfor 527.endif 528.if !defined(NO_KERNELDEPEND) 529 cd ${KRNLOBJDIR}/${_kernel}; \ 530 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ 531.endif 532 cd ${KRNLOBJDIR}/${_kernel}; \ 533 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ 534 @echo "--------------------------------------------------------------" 535 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 536 @echo "--------------------------------------------------------------" 537.endfor 538 539# 540# installkernel 541# 542# Install the kernel defined by INSTALLKERNEL 543# 544installkernel reinstallkernel installkernel.debug reinstallkernel.debug: 545.if empty(INSTALLKERNEL) 546 @echo "ERROR: No kernel \"${KERNCONF}\" to install." 547 @false 548.endif 549 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 550 ${CROSSENV} PATH=${TMPPATH} \ 551 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel//} 552 553# 554# update 555# 556# Update the source tree, by running sup and/or running cvs to update to the 557# latest copy. 558# 559update: 560.if defined(SUP_UPDATE) 561 @echo "--------------------------------------------------------------" 562 @echo ">>> Running ${SUP}" 563 @echo "--------------------------------------------------------------" 564.if defined(SUPFILE) 565 @${SUP} ${SUPFLAGS} ${SUPFILE} 566.endif 567.if defined(SUPFILE1) 568 @${SUP} ${SUPFLAGS} ${SUPFILE1} 569.endif 570.if defined(SUPFILE2) 571 @${SUP} ${SUPFLAGS} ${SUPFILE2} 572.endif 573.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE) 574 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE} 575.endif 576.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE) 577 @${SUP} ${SUPFLAGS} ${DOCSUPFILE} 578.endif 579.endif 580.if defined(CVS_UPDATE) 581 @echo "--------------------------------------------------------------" 582 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT} 583 @echo "--------------------------------------------------------------" 584 cd ${.CURDIR}; ${CVS} -R -q update -A -P -d 585.endif 586 587# 588# most 589# 590# Build most of the user binaries on the existing system libs and includes. 591# 592most: 593 @echo "--------------------------------------------------------------" 594 @echo ">>> Building programs only" 595 @echo "--------------------------------------------------------------" 596.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 597 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all 598.endfor 599 600# 601# installmost 602# 603# Install the binaries built by the 'most' target. This does not include 604# libraries or include files. 605# 606installmost: 607 @echo "--------------------------------------------------------------" 608 @echo ">>> Installing programs only" 609 @echo "--------------------------------------------------------------" 610.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 611 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install 612.endfor 613 614# 615# ------------------------------------------------------------------------ 616# 617# From here onwards are utility targets used by the 'make world' and 618# related targets. If your 'world' breaks, you may like to try to fix 619# the problem and manually run the following targets to attempt to 620# complete the build. Beware, this is *not* guaranteed to work, you 621# need to have a pretty good grip on the current state of the system 622# to attempt to manually finish it. If in doubt, 'make world' again. 623# 624 625# 626# legacy: Build compatibility shims for the next three targets 627# 628legacy: 629.for _tool in tools/build 630 @${ECHODIR} "===> ${_tool}"; \ 631 cd ${.CURDIR}/${_tool}; \ 632 ${MAKE} DIRPRFX=${_tool}/ obj; \ 633 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \ 634 ${MAKE} DIRPRFX=${_tool}/ depend; \ 635 ${MAKE} DIRPRFX=${_tool}/ all; \ 636 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install 637.endfor 638 639# 640# bootstrap-tools: Build tools needed for compatibility 641# 642.if exists(${.CURDIR}/games) && !defined(NOGAMES) 643_strfile= games/fortune/strfile 644.endif 645 646.if !defined(NO_CXX) 647_gperf= gnu/usr.bin/gperf 648.if ${BOOTSTRAPPING} < 500113 649_groff= gnu/usr.bin/groff 650.else 651_groff= gnu/usr.bin/groff/tmac 652.endif 653.endif 654 655.if ${BOOTSTRAPPING} < 450005 || \ 656 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500034 657_uudecode= usr.bin/uudecode 658.endif 659 660.if ${BOOTSTRAPPING} < 430002 || \ 661 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500019 662_xargs= usr.bin/xargs 663.endif 664 665.if ${BOOTSTRAPPING} < 430002 || \ 666 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500018 667_yacc= usr.bin/yacc 668.endif 669 670.if !defined(NO_RESCUE) && \ 671 ${BOOTSTRAPPING} < 501100 672_crunchgen= usr.sbin/crunch/crunchgen 673.endif 674 675.if ${BOOTSTRAPPING} < 500019 676_kbdcontrol= usr.sbin/kbdcontrol 677.endif 678 679bootstrap-tools: 680.for _tool in \ 681 ${_strfile} \ 682 ${_gperf} \ 683 ${_groff} \ 684 gnu/usr.bin/texinfo \ 685 usr.bin/colldef \ 686 usr.bin/makewhatis \ 687 usr.bin/rpcgen \ 688 ${_uudecode} \ 689 ${_xargs} \ 690 usr.bin/xinstall \ 691 ${_yacc} \ 692 usr.sbin/config \ 693 ${_crunchgen} \ 694 ${_kbdcontrol} 695 @${ECHODIR} "===> ${_tool}"; \ 696 cd ${.CURDIR}/${_tool}; \ 697 ${MAKE} DIRPRFX=${_tool}/ obj; \ 698 ${MAKE} DIRPRFX=${_tool}/ depend; \ 699 ${MAKE} DIRPRFX=${_tool}/ all; \ 700 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install 701.endfor 702 703# 704# build-tools: Build special purpose build tools 705# 706.if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules) 707_aicasm= sys/modules/aic7xxx/aicasm 708.endif 709 710.if exists(${.CURDIR}/share) && !defined(NOSHARE) 711_share= share/syscons/scrnmaps 712.endif 713 714.if !defined(NO_FORTRAN) 715_fortran= gnu/usr.bin/cc/f771 716.endif 717 718.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 719 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 720_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \ 721 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl 722.endif 723 724.if exists(${.CURDIR}/rescue) && !defined(NO_RESCUE) 725_rescue= rescue/rescue 726.endif 727 728build-tools: 729.for _tool in \ 730 bin/csh \ 731 bin/sh \ 732 ${_rescue} \ 733 gnu/usr.bin/cc/cc_tools \ 734 ${_fortran} \ 735 ${_libkrb5} \ 736 lib/libncurses \ 737 ${_share} \ 738 ${_aicasm} \ 739 usr.bin/awk \ 740 usr.bin/file \ 741 usr.sbin/sysinstall 742 @${ECHODIR} "===> ${_tool}"; \ 743 cd ${.CURDIR}/${_tool}; \ 744 ${MAKE} DIRPRFX=${_tool}/ obj; \ 745 ${MAKE} DIRPRFX=${_tool}/ build-tools 746.endfor 747 748# 749# cross-tools: Build cross-building tools 750# 751.if ${TARGET_ARCH} == "sparc64" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \ 752 ${BOOTSTRAPPING} < 500037 753_elf2aout= usr.bin/elf2aout 754.endif 755 756.if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} 757_btxld= usr.sbin/btxld 758.endif 759 760.if (!defined(NO_RESCUE) || \ 761 defined(RELEASEDIR)) && \ 762 (${TARGET_ARCH} != ${MACHINE_ARCH} || ${BOOTSTRAPPING} < 501101) 763_crunchide= usr.sbin/crunch/crunchide 764.endif 765 766.if ${TARGET_ARCH} == "alpha" && ${TARGET_ARCH} != ${MACHINE_ARCH} 767_elf2exe= usr.sbin/elf2exe 768.endif 769 770.if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \ 771 defined(RELEASEDIR) 772_kgzip= usr.sbin/kgzip 773.endif 774 775cross-tools: 776.for _tool in \ 777 gnu/usr.bin/binutils \ 778 gnu/usr.bin/cc \ 779 ${_elf2aout} \ 780 usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint \ 781 ${_btxld} \ 782 ${_crunchide} \ 783 ${_elf2exe} \ 784 ${_kgzip} 785 @${ECHODIR} "===> ${_tool}"; \ 786 cd ${.CURDIR}/${_tool}; \ 787 ${MAKE} DIRPRFX=${_tool}/ obj; \ 788 ${MAKE} DIRPRFX=${_tool}/ depend; \ 789 ${MAKE} DIRPRFX=${_tool}/ all; \ 790 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 791.endfor 792 793# 794# hierarchy - ensure that all the needed directories are present 795# 796hierarchy: 797 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 798 799# 800# libraries - build all libraries, and install them under ${DESTDIR}. 801# 802# The list of libraries with dependents (${_prebuild_libs}) and their 803# interdependencies (__L) are built automatically by the 804# ${.CURDIR}/tools/make_libdeps.sh script. 805# 806libraries: 807 cd ${.CURDIR}; \ 808 ${MAKE} -f Makefile.inc1 _startup_libs; \ 809 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 810 ${MAKE} -f Makefile.inc1 _generic_libs; 811 812# These dependencies are not automatically generated: 813# 814# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all 815# shared libraries for ELF. 816# 817# lib/libc (libc_pic.a) must be built before lib/libpthread. 818# 819_startup_libs= gnu/lib/csu gnu/lib/libgcc 820.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf) 821_startup_libs+= lib/csu/${MACHINE_ARCH}-elf 822.else 823_startup_libs+= lib/csu/${MACHINE_ARCH} 824.endif 825 826_prebuild_libs= 827_generic_libs= gnu/lib 828 829.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 830 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 831_prebuild_libs+= kerberos5/lib/libasn1 832_prebuild_libs+= kerberos5/lib/libgssapi 833_prebuild_libs+= kerberos5/lib/libkrb5 834_prebuild_libs+= kerberos5/lib/libroken 835_generic_libs+= kerberos5/lib 836.endif 837 838.if !defined(NOLIBPTHREAD) 839_prebuild_libs+= lib/libc 840.endif 841_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libexpat \ 842 lib/libkvm lib/libmd \ 843 lib/libncurses lib/libopie lib/libpam lib/libradius \ 844 lib/librpcsvc \ 845 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \ 846 lib/libz lib/msun 847 848lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 849lib/libypclnt__L: lib/librpcsvc__L 850 851_generic_libs+= lib 852 853.if !defined(NOCRYPT) 854.if !defined(NO_OPENSSL) 855_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl 856.if !defined(NO_OPENSSH) 857_prebuild_libs+= secure/lib/libssh 858secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L 859.endif 860.endif 861_generic_libs+= secure/lib 862.endif 863 864_generic_libs+= usr.bin/lex/lib 865 866.if ${MACHINE_ARCH} == "i386" 867_generic_libs+= usr.sbin/pcvt/keycap 868.endif 869 870.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs} 871${_lib}__L: .PHONY 872.if exists(${.CURDIR}/${_lib}) 873 @${ECHODIR} "===> ${_lib}"; \ 874 cd ${.CURDIR}/${_lib}; \ 875 ${MAKE} DIRPRFX=${_lib}/ depend; \ 876 ${MAKE} DIRPRFX=${_lib}/ all; \ 877 ${MAKE} DIRPRFX=${_lib}/ install 878.endif 879.endfor 880 881# libpam is special: we need to build static PAM modules before 882# static PAM library, and dynamic PAM library before dynamic PAM 883# modules. 884lib/libpam__L: .PHONY 885 @${ECHODIR} "===> lib/libpam"; \ 886 cd ${.CURDIR}/lib/libpam; \ 887 ${MAKE} DIRPRFX=lib/libpam/ depend; \ 888 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \ 889 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install 890 891_startup_libs: ${_startup_libs:S/$/__L/} 892_prebuild_libs: ${_prebuild_libs:S/$/__L/} 893_generic_libs: ${_generic_libs:S/$/__L/} 894 895.for __target in all clean cleandepend cleandir depend includes obj 896.for entry in ${SUBDIR} 897${entry}.${__target}__D: .PHONY 898 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 899 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 900 edir=${entry}.${MACHINE_ARCH}; \ 901 cd ${.CURDIR}/$${edir}; \ 902 else \ 903 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 904 edir=${entry}; \ 905 cd ${.CURDIR}/$${edir}; \ 906 fi; \ 907 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 908.endfor 909par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 910.endfor 911 912.include <bsd.subdir.mk> 913