Makefile.inc1 revision 119537
1# 2# $FreeBSD: head/Makefile.inc1 119537 2003-08-28 20:13:34Z marcel $ 3# 4# Make command line options: 5# -DNO_KERBEROS Do not build Heimdal (Kerberos 5) 6# -DNO_RESCUE do not build rescue binaries 7# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir 8# -DNOCLEAN do not clean at all 9# -DNOCRYPT will prevent building of crypt versions 10# -DNOMAN do not build the manual pages 11# -DNOPROFILE do not build profiled libraries 12# -DNOGAMES do not go into games subdir 13# -DNOSHARE do not go into share subdir 14# -DNOINFO do not make or install info files 15# -DNOLIBC_R do not build libc_r. 16# -DNO_FORTRAN do not build g77 and related libraries. 17# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel 18# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel 19# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel 20# -DNO_PORTSUPDATE do not update ports in ${MAKE} update 21# -DNO_DOCUPDATE do not update doc in ${MAKE} update 22# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list 23# TARGET_ARCH="arch" to crossbuild world to a different arch 24 25# 26# The intended user-driven targets are: 27# buildworld - rebuild *everything*, including glue to help do upgrades 28# installworld- install everything built by "buildworld" 29# update - convenient way to update your source tree (eg: sup/cvs) 30# most - build user commands, no libraries or include files 31# installmost - install user commands, no libraries or include files 32# 33# Standard targets (not defined here) are documented in the makefiles in 34# /usr/share/mk. These include: 35# obj depend all install clean cleandepend cleanobj 36 37# Put initial settings here. 38SUBDIR= 39 40# We must do share/info early so that installation of info `dir' 41# entries works correctly. Do it first since it is less likely to 42# grow dependencies on include and lib than vice versa. 43.if exists(${.CURDIR}/share/info) 44SUBDIR+= share/info 45.endif 46 47.if exists(${.CURDIR}/include) 48SUBDIR+= include 49.endif 50.if exists(${.CURDIR}/lib) 51SUBDIR+= lib 52.endif 53 54.if exists(${.CURDIR}/bin) 55SUBDIR+= bin 56.endif 57.if exists(${.CURDIR}/games) && !defined(NOGAMES) 58SUBDIR+= games 59.endif 60.if exists(${.CURDIR}/gnu) 61SUBDIR+= gnu 62.endif 63.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 64 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 65SUBDIR+= kerberos5 66.endif 67.if exists(${.CURDIR}/libexec) 68SUBDIR+= libexec 69.endif 70.if exists(${.CURDIR}/rescue) && !defined(NO_RESCUE) 71SUBDIR+= rescue 72.endif 73.if exists(${.CURDIR}/sbin) 74SUBDIR+= sbin 75.endif 76.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) 77SUBDIR+= secure 78.endif 79.if exists(${.CURDIR}/share) && !defined(NOSHARE) 80SUBDIR+= share 81.endif 82.if exists(${.CURDIR}/sys) 83SUBDIR+= sys 84.endif 85.if exists(${.CURDIR}/usr.bin) 86SUBDIR+= usr.bin 87.endif 88.if exists(${.CURDIR}/usr.sbin) 89SUBDIR+= usr.sbin 90.endif 91 92# etc must be last for "distribute" to work 93.if exists(${.CURDIR}/etc) 94SUBDIR+= etc 95.endif 96 97# These are last, since it is nice to at least get the base system 98# rebuilt before you do them. 99.if defined(LOCAL_DIRS) 100.for _DIR in ${LOCAL_DIRS} 101.if exists(${.CURDIR}/${_DIR}) && exists(${.CURDIR}/${_DIR}/Makefile) 102SUBDIR+= ${_DIR} 103.endif 104.endfor 105.endif 106 107.if defined(SUBDIR_OVERRIDE) 108SUBDIR= ${SUBDIR_OVERRIDE} 109.endif 110 111.if defined(NOCLEANDIR) 112CLEANDIR= clean cleandepend 113.else 114CLEANDIR= cleandir 115.endif 116 117CVS?= cvs 118SUP?= /usr/local/bin/cvsup 119SUPFLAGS?= -g -L 2 -P - 120.if defined(SUPHOST) 121SUPFLAGS+= -h ${SUPHOST} 122.endif 123 124MAKEOBJDIRPREFIX?= /usr/obj 125.if !defined(OSRELDATE) 126.if exists(/usr/include/osreldate.h) 127OSRELDATE!= awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \ 128 /usr/include/osreldate.h 129.else 130OSRELDATE= 0 131.endif 132.endif 133TARGET_ARCH?= ${MACHINE_ARCH} 134.if ${TARGET_ARCH} == ${MACHINE_ARCH} 135TARGET?= ${MACHINE} 136TARGET_CPUTYPE?=${CPUTYPE} 137.else 138TARGET?= ${TARGET_ARCH} 139TARGET_CPUTYPE?= 140.endif 141.if !empty(TARGET_CPUTYPE) 142_TARGET_CPUTYPE=${TARGET_CPUTYPE} 143.else 144_TARGET_CPUTYPE=dummy 145.endif 146_CPUTYPE!= ${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \ 147 CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE 148.if ${_CPUTYPE} != ${_TARGET_CPUTYPE} 149.error CPUTYPE global should be set with ?=. 150.endif 151.if make(buildworld) 152BUILD_ARCH!= sysctl -n hw.machine_arch 153.if ${MACHINE_ARCH} != ${BUILD_ARCH} 154.error To cross-build, set TARGET_ARCH. 155.endif 156.endif 157.if ${MACHINE} == ${TARGET} 158OBJTREE= ${MAKEOBJDIRPREFIX} 159.else 160OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET} 161.endif 162WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH} 163# /usr/games added for fortune which depend on strfile 164BPATH= ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games 165XPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games 166STRICTTMPPATH= ${BPATH}:${XPATH} 167TMPPATH= ${STRICTTMPPATH}:${PATH} 168 169INSTALLTMP!= /usr/bin/mktemp -d -u -t install 170 171# 172# Building a world goes through the following stages 173# 174# 1. legacy stage [BMAKE] 175# This stage is responsible for creating compatibility 176# shims that are needed by the bootstrap-tools, 177# build-tools and cross-tools stages. 178# 1. bootstrap-tools stage [BMAKE] 179# This stage is responsible for creating programs that 180# are needed for backward compatibility reasons. They 181# are not built as cross-tools. 182# 2. build-tools stage [TMAKE] 183# This stage is responsible for creating the object 184# tree and building any tools that are needed during 185# the build process. 186# 3. cross-tools stage [XMAKE] 187# This stage is responsible for creating any tools that 188# are needed for cross-builds. A cross-compiler is one 189# of them. 190# 4. world stage [WMAKE] 191# This stage actually builds the world. 192# 5. install stage (optional) [IMAKE] 193# This stage installs a previously built world. 194# 195 196BOOTSTRAPPING?= 0 197 198# Common environment for world related stages 199CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \ 200 MACHINE_ARCH=${TARGET_ARCH} \ 201 MACHINE=${TARGET} \ 202 CPUTYPE=${TARGET_CPUTYPE} \ 203 GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \ 204 GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \ 205 GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac 206 207# bootstrap-tools stage 208BMAKEENV= DESTDIR= \ 209 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 210 PATH=${BPATH}:${PATH} \ 211 WORLDTMP=${WORLDTMP} \ 212 MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}" 213BMAKE= MAKEOBJDIRPREFIX=${WORLDTMP} \ 214 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 215 BOOTSTRAPPING=${OSRELDATE} \ 216 -DNOHTML -DNOINFO -DNOLINT -DNOMAN -DNOPIC -DNOPROFILE \ 217 -DNOSHARED -DNO_CPU_CFLAGS -DNO_WARNS 218 219# build-tools stage 220TMAKE= MAKEOBJDIRPREFIX=${OBJTREE} \ 221 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 222 BOOTSTRAPPING=${OSRELDATE} -DNOLINT -DNO_CPU_CFLAGS -DNO_WARNS 223 224# cross-tools stage 225XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB 226 227# world stage 228WMAKEENV= ${CROSSENV} \ 229 DESTDIR=${WORLDTMP} \ 230 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 231 PATH=${TMPPATH} 232WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 233 234# install stage 235IMAKEENV= ${CROSSENV} \ 236 PATH=${STRICTTMPPATH}:${INSTALLTMP} 237IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 238 239# kernel stage 240KMAKEENV= ${WMAKEENV} 241 242# 243# buildworld 244# 245# Attempt to rebuild the entire system, with reasonable chance of 246# success, regardless of how old your existing system is. 247# 248_worldtmp: 249.if ${.CURDIR:C/[^,]//g} != "" 250# The m4 build of sendmail files doesn't like it if ',' is used 251# anywhere in the path of it's files. 252 @echo 253 @echo "*** Error: path to source tree contains a comma ','" 254 @echo 255 @false 256.endif 257 @echo 258 @echo "--------------------------------------------------------------" 259 @echo ">>> Rebuilding the temporary build tree" 260 @echo "--------------------------------------------------------------" 261.if !defined(NOCLEAN) 262 rm -rf ${WORLDTMP} 263.else 264 rm -rf ${WORLDTMP}/legacy/usr/include 265 # XXX - These two can depend on any header file. 266 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 267 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 268.endif 269.for _dir in \ 270 usr/bin usr/games usr/include/sys usr/lib \ 271 usr/libexec usr/sbin usr/share/dict \ 272 usr/share/groff_font/devX100 \ 273 usr/share/groff_font/devX100-12 \ 274 usr/share/groff_font/devX75 \ 275 usr/share/groff_font/devX75-12 \ 276 usr/share/groff_font/devascii \ 277 usr/share/groff_font/devcp1047 \ 278 usr/share/groff_font/devdvi \ 279 usr/share/groff_font/devhtml \ 280 usr/share/groff_font/devkoi8-r \ 281 usr/share/groff_font/devlatin1 \ 282 usr/share/groff_font/devlbp \ 283 usr/share/groff_font/devlj4 \ 284 usr/share/groff_font/devps \ 285 usr/share/groff_font/devutf8 \ 286 usr/share/tmac/mdoc usr/share/tmac/mm 287 mkdir -p ${WORLDTMP}/legacy/${_dir} 288.endfor 289.for _dir in \ 290 lib usr/bin usr/include usr/lib/compat/aout usr/libdata/ldscripts \ 291 usr/libexec usr/share/misc 292 mkdir -p ${WORLDTMP}/${_dir} 293.endfor 294 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ 295 -p ${WORLDTMP}/usr/include 296 ln -sf ${.CURDIR}/sys ${WORLDTMP} 297_legacy: 298 @echo 299 @echo "--------------------------------------------------------------" 300 @echo ">>> stage 1: legacy release compatibility shims" 301 @echo "--------------------------------------------------------------" 302 cd ${.CURDIR}; ${BMAKE} legacy 303_bootstrap-tools: 304 @echo 305 @echo "--------------------------------------------------------------" 306 @echo ">>> stage 1: bootstrap tools" 307 @echo "--------------------------------------------------------------" 308 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 309_cleanobj: 310.if !defined(NOCLEAN) 311 @echo 312 @echo "--------------------------------------------------------------" 313 @echo ">>> stage 2: cleaning up the object tree" 314 @echo "--------------------------------------------------------------" 315 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 316.endif 317_obj: 318 @echo 319 @echo "--------------------------------------------------------------" 320 @echo ">>> stage 2: rebuilding the object tree" 321 @echo "--------------------------------------------------------------" 322 cd ${.CURDIR}; ${WMAKE} par-obj 323_build-tools: 324 @echo 325 @echo "--------------------------------------------------------------" 326 @echo ">>> stage 2: build tools" 327 @echo "--------------------------------------------------------------" 328 cd ${.CURDIR}; ${TMAKE} build-tools 329_cross-tools: 330 @echo 331 @echo "--------------------------------------------------------------" 332 @echo ">>> stage 3: cross tools" 333 @echo "--------------------------------------------------------------" 334 cd ${.CURDIR}; ${XMAKE} cross-tools 335_includes: 336 @echo 337 @echo "--------------------------------------------------------------" 338 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include" 339 @echo "--------------------------------------------------------------" 340 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 341_libraries: 342 @echo 343 @echo "--------------------------------------------------------------" 344 @echo ">>> stage 4: building libraries" 345 @echo "--------------------------------------------------------------" 346 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG -DNOLINT \ 347 libraries 348_depend: 349 @echo 350 @echo "--------------------------------------------------------------" 351 @echo ">>> stage 4: make dependencies" 352 @echo "--------------------------------------------------------------" 353 cd ${.CURDIR}; ${WMAKE} par-depend 354everything: 355 @echo 356 @echo "--------------------------------------------------------------" 357 @echo ">>> stage 4: building everything.." 358 @echo "--------------------------------------------------------------" 359 cd ${.CURDIR}; ${WMAKE} par-all 360 361 362WMAKE_TGTS= 363.if !defined(SUBDIR_OVERRIDE) 364WMAKE_TGTS+= _worldtmp _legacy _bootstrap-tools 365.endif 366WMAKE_TGTS+= _cleanobj _obj _build-tools 367.if !defined(SUBDIR_OVERRIDE) 368WMAKE_TGTS+= _cross-tools 369.endif 370WMAKE_TGTS+= _includes _libraries _depend everything 371 372buildworld: ${WMAKE_TGTS} 373.ORDER: ${WMAKE_TGTS} 374 375# 376# installcheck 377# 378# Checks to be sure system is ready for installworld 379# 380installcheck: 381.if !defined(NO_SENDMAIL) 382 @if ! `id -u smmsp > /dev/null`; then \ 383 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \ 384 false; \ 385 fi 386 @if ! `id -g smmsp > /dev/null`; then \ 387 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \ 388 false; \ 389 fi 390.endif 391 392# 393# distributeworld 394# 395# Distributes everything compiled by a `buildworld'. 396# 397# installworld 398# 399# Installs everything compiled by a 'buildworld'. 400# 401distributeworld installworld: installcheck 402 mkdir -p ${INSTALLTMP} 403 for prog in [ awk cap_mkdb cat chflags chmod chown \ 404 date echo egrep find grep \ 405 ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \ 406 test true uname wc zic; do \ 407 cp `which $$prog` ${INSTALLTMP}; \ 408 done 409 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 410 rm -rf ${INSTALLTMP} 411 412# 413# reinstall 414# 415# If you have a build server, you can NFS mount the source and obj directories 416# and do a 'make reinstall' on the *client* to install new binaries from the 417# most recent server build. 418# 419reinstall: 420 @echo "--------------------------------------------------------------" 421 @echo ">>> Making hierarchy" 422 @echo "--------------------------------------------------------------" 423 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 424 @echo 425 @echo "--------------------------------------------------------------" 426 @echo ">>> Installing everything.." 427 @echo "--------------------------------------------------------------" 428 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 429.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN) 430 @echo 431 @echo "--------------------------------------------------------------" 432 @echo ">>> Rebuilding man page indices" 433 @echo "--------------------------------------------------------------" 434 cd ${.CURDIR}/share/man; ${MAKE} makedb 435.endif 436 437redistribute: 438 @echo "--------------------------------------------------------------" 439 @echo ">>> Distributing everything.." 440 @echo "--------------------------------------------------------------" 441 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute 442 443# 444# buildkernel and installkernel 445# 446# Which kernels to build and/or install is specified by setting 447# KERNCONF. If not defined a GENERIC kernel is built/installed. 448# Only the existing (depending TARGET) config files are used 449# for building kernels and only the first of these is designated 450# as the one being installed. 451# 452# Note that we have to use TARGET instead of TARGET_ARCH when 453# we're in kernel-land. Since only TARGET_ARCH is (expected) to 454# be set to cross-build, we have to make sure TARGET is set 455# properly. 456 457.if !defined(KERNCONF) && defined(KERNEL) 458KERNCONF= ${KERNEL} 459KERNWARN= yes 460.else 461KERNCONF?= GENERIC 462.endif 463INSTKERNNAME?= kernel 464 465KERNSRCDIR?= ${.CURDIR}/sys 466KRNLCONFDIR= ${KERNSRCDIR}/${TARGET}/conf 467KRNLOBJDIR= ${OBJTREE}${KERNSRCDIR} 468KERNCONFDIR?= ${KRNLCONFDIR} 469 470BUILDKERNELS= 471INSTALLKERNEL= 472.for _kernel in ${KERNCONF} 473.if exists(${KERNCONFDIR}/${_kernel}) 474BUILDKERNELS+= ${_kernel} 475.if empty(INSTALLKERNEL) 476INSTALLKERNEL= ${_kernel} 477.endif 478.endif 479.endfor 480 481# 482# buildkernel 483# 484# Builds all kernels defined by BUILDKERNELS. 485# 486buildkernel: 487.if empty(BUILDKERNELS) 488 @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF})."; 489 @false 490.endif 491.if defined(KERNWARN) 492 @echo "--------------------------------------------------------------" 493 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 494 @echo "--------------------------------------------------------------" 495 @sleep 3 496.endif 497 @echo 498.for _kernel in ${BUILDKERNELS} 499 @echo "--------------------------------------------------------------" 500 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 501 @echo "--------------------------------------------------------------" 502 @echo "===> ${_kernel}" 503 mkdir -p ${KRNLOBJDIR} 504.if !defined(NO_KERNELCONFIG) 505 cd ${KRNLCONFDIR}; \ 506 PATH=${TMPPATH} \ 507 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 508 ${KERNCONFDIR}/${_kernel} 509.endif 510.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 511 cd ${KRNLOBJDIR}/${_kernel}; \ 512 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${CLEANDIR} 513.endif 514 cd ${KRNLOBJDIR}/${_kernel}; \ 515 MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \ 516 ${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile 517 cd ${KRNLOBJDIR}/${_kernel}; \ 518 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} obj 519# XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case. 520.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules) 521.for target in obj depend all 522 cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \ 523 MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \ 524 ${MAKE} -DNO_CPU_CFLAGS ${target} 525.endfor 526.endif 527.if !defined(NO_KERNELDEPEND) 528 cd ${KRNLOBJDIR}/${_kernel}; \ 529 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ 530.endif 531 cd ${KRNLOBJDIR}/${_kernel}; \ 532 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ 533 @echo "--------------------------------------------------------------" 534 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 535 @echo "--------------------------------------------------------------" 536.endfor 537 538# 539# installkernel 540# 541# Install the kernel defined by INSTALLKERNEL 542# 543installkernel reinstallkernel installkernel.debug reinstallkernel.debug: 544.if empty(INSTALLKERNEL) 545 @echo "ERROR: No kernel \"${KERNCONF}\" to install." 546 @false 547.endif 548 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 549 ${CROSSENV} PATH=${TMPPATH} \ 550 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel//} 551 552# 553# update 554# 555# Update the source tree, by running sup and/or running cvs to update to the 556# latest copy. 557# 558update: 559.if defined(SUP_UPDATE) 560 @echo "--------------------------------------------------------------" 561 @echo ">>> Running ${SUP}" 562 @echo "--------------------------------------------------------------" 563.if defined(SUPFILE) 564 @${SUP} ${SUPFLAGS} ${SUPFILE} 565.endif 566.if defined(SUPFILE1) 567 @${SUP} ${SUPFLAGS} ${SUPFILE1} 568.endif 569.if defined(SUPFILE2) 570 @${SUP} ${SUPFLAGS} ${SUPFILE2} 571.endif 572.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE) 573 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE} 574.endif 575.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE) 576 @${SUP} ${SUPFLAGS} ${DOCSUPFILE} 577.endif 578.endif 579.if defined(CVS_UPDATE) 580 @echo "--------------------------------------------------------------" 581 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT} 582 @echo "--------------------------------------------------------------" 583 cd ${.CURDIR}; ${CVS} -R -q update -A -P -d 584.endif 585 586# 587# most 588# 589# Build most of the user binaries on the existing system libs and includes. 590# 591most: 592 @echo "--------------------------------------------------------------" 593 @echo ">>> Building programs only" 594 @echo "--------------------------------------------------------------" 595.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 596 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all 597.endfor 598 599# 600# installmost 601# 602# Install the binaries built by the 'most' target. This does not include 603# libraries or include files. 604# 605installmost: 606 @echo "--------------------------------------------------------------" 607 @echo ">>> Installing programs only" 608 @echo "--------------------------------------------------------------" 609.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 610 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install 611.endfor 612 613# 614# ------------------------------------------------------------------------ 615# 616# From here onwards are utility targets used by the 'make world' and 617# related targets. If your 'world' breaks, you may like to try to fix 618# the problem and manually run the following targets to attempt to 619# complete the build. Beware, this is *not* guaranteed to work, you 620# need to have a pretty good grip on the current state of the system 621# to attempt to manually finish it. If in doubt, 'make world' again. 622# 623 624# 625# legacy: Build compatibility shims for the next three targets 626# 627legacy: 628.for _tool in tools/build 629 @${ECHODIR} "===> ${_tool}"; \ 630 cd ${.CURDIR}/${_tool}; \ 631 ${MAKE} DIRPRFX=${_tool}/ obj; \ 632 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \ 633 ${MAKE} DIRPRFX=${_tool}/ depend; \ 634 ${MAKE} DIRPRFX=${_tool}/ all; \ 635 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install 636.endfor 637 638# 639# bootstrap-tools: Build tools needed for compatibility 640# 641.if exists(${.CURDIR}/games) && !defined(NOGAMES) 642_strfile= games/fortune/strfile 643.endif 644 645.if !defined(NO_CXX) 646_gperf= gnu/usr.bin/gperf 647.if ${BOOTSTRAPPING} < 500113 648_groff= gnu/usr.bin/groff 649.else 650_groff= gnu/usr.bin/groff/tmac 651.endif 652.endif 653 654.if ${BOOTSTRAPPING} < 450005 || \ 655 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500034 656_uudecode= usr.bin/uudecode 657.endif 658 659.if ${BOOTSTRAPPING} < 430002 || \ 660 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500019 661_xargs= usr.bin/xargs 662.endif 663 664.if ${BOOTSTRAPPING} < 430002 || \ 665 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500018 666_yacc= usr.bin/yacc 667.endif 668 669.if !defined(NO_RESCUE) && \ 670 ${BOOTSTRAPPING} < 501100 671_crunchgen= usr.sbin/crunch/crunchgen 672.endif 673 674.if ${BOOTSTRAPPING} < 500019 675_kbdcontrol= usr.sbin/kbdcontrol 676.endif 677 678bootstrap-tools: 679.for _tool in \ 680 ${_strfile} \ 681 ${_gperf} \ 682 ${_groff} \ 683 gnu/usr.bin/texinfo \ 684 usr.bin/colldef \ 685 usr.bin/makewhatis \ 686 usr.bin/rpcgen \ 687 ${_uudecode} \ 688 ${_xargs} \ 689 usr.bin/xinstall \ 690 ${_yacc} \ 691 usr.sbin/config \ 692 ${_crunchgen} \ 693 ${_kbdcontrol} 694 @${ECHODIR} "===> ${_tool}"; \ 695 cd ${.CURDIR}/${_tool}; \ 696 ${MAKE} DIRPRFX=${_tool}/ obj; \ 697 ${MAKE} DIRPRFX=${_tool}/ depend; \ 698 ${MAKE} DIRPRFX=${_tool}/ all; \ 699 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install 700.endfor 701 702# 703# build-tools: Build special purpose build tools 704# 705.if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules) 706_aicasm= sys/modules/aic7xxx/aicasm 707.endif 708 709.if exists(${.CURDIR}/share) && !defined(NOSHARE) 710_share= share/syscons/scrnmaps 711.endif 712 713.if !defined(NO_FORTRAN) 714_fortran= gnu/usr.bin/cc/f771 715.endif 716 717.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 718 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 719_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \ 720 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl 721.endif 722 723.if exists(${.CURDIR}/rescue) && !defined(NO_RESCUE) 724_rescue= rescue/rescue 725.endif 726 727build-tools: 728.for _tool in \ 729 bin/csh \ 730 bin/sh \ 731 ${_rescue} \ 732 gnu/usr.bin/cc/cc_tools \ 733 ${_fortran} \ 734 ${_libkrb5} \ 735 lib/libncurses \ 736 ${_share} \ 737 ${_aicasm} \ 738 usr.bin/awk \ 739 usr.bin/file \ 740 usr.sbin/sysinstall 741 @${ECHODIR} "===> ${_tool}"; \ 742 cd ${.CURDIR}/${_tool}; \ 743 ${MAKE} DIRPRFX=${_tool}/ obj; \ 744 ${MAKE} DIRPRFX=${_tool}/ build-tools 745.endfor 746 747# 748# cross-tools: Build cross-building tools 749# 750.if ${TARGET_ARCH} == "sparc64" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \ 751 ${BOOTSTRAPPING} < 500037 752_elf2aout= usr.bin/elf2aout 753.endif 754 755.if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} 756_btxld= usr.sbin/btxld 757.endif 758 759.if (!defined(NO_RESCUE) || \ 760 defined(RELEASEDIR)) && \ 761 ( ${TARGET_ARCH} != ${MACHINE_ARCH} || ${BOOTSTRAPPING} < 501101 ) 762_crunchide= usr.sbin/crunch/crunchide 763.endif 764 765.if ${TARGET_ARCH} == "alpha" && ${TARGET_ARCH} != ${MACHINE_ARCH} 766_elf2exe= usr.sbin/elf2exe 767.endif 768 769.if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \ 770 defined(RELEASEDIR) 771_kgzip= usr.sbin/kgzip 772.endif 773 774cross-tools: 775.for _tool in \ 776 gnu/usr.bin/binutils \ 777 gnu/usr.bin/cc \ 778 ${_elf2aout} \ 779 usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint \ 780 ${_btxld} \ 781 ${_crunchide} \ 782 ${_elf2exe} \ 783 ${_kgzip} 784 @${ECHODIR} "===> ${_tool}"; \ 785 cd ${.CURDIR}/${_tool}; \ 786 ${MAKE} DIRPRFX=${_tool}/ obj; \ 787 ${MAKE} DIRPRFX=${_tool}/ depend; \ 788 ${MAKE} DIRPRFX=${_tool}/ all; \ 789 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 790.endfor 791 792# 793# hierarchy - ensure that all the needed directories are present 794# 795hierarchy: 796 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 797 798# 799# libraries - build all libraries, and install them under ${DESTDIR}. 800# 801# The list of libraries with dependents (${_prebuild_libs}) and their 802# interdependencies (__L) are built automatically by the 803# ${.CURDIR}/tools/make_libdeps.sh script. 804# 805libraries: 806 cd ${.CURDIR}; \ 807 ${MAKE} -f Makefile.inc1 _startup_libs; \ 808 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 809 ${MAKE} -f Makefile.inc1 _generic_libs; 810 811# These dependencies are not automatically generated: 812# 813# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all 814# shared libraries for ELF. 815# 816# lib/libc (libc_pic.a) must be built before lib/libpthread. 817# 818_startup_libs= gnu/lib/csu gnu/lib/libgcc 819.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf) 820_startup_libs+= lib/csu/${MACHINE_ARCH}-elf 821.else 822_startup_libs+= lib/csu/${MACHINE_ARCH} 823.endif 824 825_prebuild_libs= 826_generic_libs= gnu/lib 827 828.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 829 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 830_prebuild_libs+= kerberos5/lib/libasn1 831_prebuild_libs+= kerberos5/lib/libgssapi 832_prebuild_libs+= kerberos5/lib/libkrb5 833_prebuild_libs+= kerberos5/lib/libroken 834_generic_libs+= kerberos5/lib 835.endif 836 837.if !defined(NOLIBPTHREAD) 838_prebuild_libs+= lib/libc 839.endif 840_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libexpat \ 841 lib/libkvm lib/libmd \ 842 lib/libncurses lib/libopie lib/libpam lib/libradius \ 843 lib/librpcsvc \ 844 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \ 845 lib/libz lib/msun 846 847lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 848lib/libypclnt__L: lib/librpcsvc__L 849 850_generic_libs+= lib 851 852.if !defined(NOCRYPT) 853.if !defined(NO_OPENSSL) 854_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl 855.if !defined(NO_OPENSSH) 856_prebuild_libs+= secure/lib/libssh 857secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L 858.endif 859.endif 860_generic_libs+= secure/lib 861.endif 862 863_generic_libs+= usr.bin/lex/lib 864 865.if ${MACHINE_ARCH} == "i386" 866_generic_libs+= usr.sbin/pcvt/keycap 867.endif 868 869.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs} 870${_lib}__L: .PHONY 871.if exists(${.CURDIR}/${_lib}) 872 @${ECHODIR} "===> ${_lib}"; \ 873 cd ${.CURDIR}/${_lib}; \ 874 ${MAKE} DIRPRFX=${_lib}/ depend; \ 875 ${MAKE} DIRPRFX=${_lib}/ all; \ 876 ${MAKE} DIRPRFX=${_lib}/ install 877.endif 878.endfor 879 880# libpam is special: we need to build static PAM modules before 881# static PAM library, and dynamic PAM library before dynamic PAM 882# modules. 883lib/libpam__L: .PHONY 884 @${ECHODIR} "===> lib/libpam"; \ 885 cd ${.CURDIR}/lib/libpam; \ 886 ${MAKE} DIRPRFX=lib/libpam/ depend; \ 887 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \ 888 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install 889 890_startup_libs: ${_startup_libs:S/$/__L/} 891_prebuild_libs: ${_prebuild_libs:S/$/__L/} 892_generic_libs: ${_generic_libs:S/$/__L/} 893 894.for __target in all clean cleandepend cleandir depend includes obj 895.for entry in ${SUBDIR} 896${entry}.${__target}__D: .PHONY 897 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 898 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 899 edir=${entry}.${MACHINE_ARCH}; \ 900 cd ${.CURDIR}/$${edir}; \ 901 else \ 902 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 903 edir=${entry}; \ 904 cd ${.CURDIR}/$${edir}; \ 905 fi; \ 906 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 907.endfor 908par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 909.endfor 910 911.include <bsd.subdir.mk> 912