Makefile.inc1 revision 117976
1# 2# $FreeBSD: head/Makefile.inc1 117976 2003-07-24 18:14:29Z markm $ 3# 4# Make command line options: 5# -DNO_KERBEROS Do not build Heimdal (Kerberos 5) 6# -DNO_RESCUE do not build rescue binaries 7# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir 8# -DNOCLEAN do not clean at all 9# -DNOCRYPT will prevent building of crypt versions 10# -DNOMAN do not build the manual pages 11# -DNOPROFILE do not build profiled libraries 12# -DNOGAMES do not go into games subdir 13# -DNOSHARE do not go into share subdir 14# -DNOINFO do not make or install info files 15# -DNOLIBC_R do not build libc_r. 16# -DNO_FORTRAN do not build g77 and related libraries. 17# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel 18# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel 19# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel 20# -DNO_PORTSUPDATE do not update ports in ${MAKE} update 21# -DNO_DOCUPDATE do not update doc in ${MAKE} update 22# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list 23# TARGET_ARCH="arch" to crossbuild world to a different arch 24 25# 26# The intended user-driven targets are: 27# buildworld - rebuild *everything*, including glue to help do upgrades 28# installworld- install everything built by "buildworld" 29# update - convenient way to update your source tree (eg: sup/cvs) 30# most - build user commands, no libraries or include files 31# installmost - install user commands, no libraries or include files 32# 33# Standard targets (not defined here) are documented in the makefiles in 34# /usr/share/mk. These include: 35# obj depend all install clean cleandepend cleanobj 36 37# Put initial settings here. 38SUBDIR= 39 40# We must do share/info early so that installation of info `dir' 41# entries works correctly. Do it first since it is less likely to 42# grow dependencies on include and lib than vice versa. 43.if exists(${.CURDIR}/share/info) 44SUBDIR+= share/info 45.endif 46 47.if exists(${.CURDIR}/include) 48SUBDIR+= include 49.endif 50.if exists(${.CURDIR}/lib) 51SUBDIR+= lib 52.endif 53 54.if exists(${.CURDIR}/bin) 55SUBDIR+= bin 56.endif 57.if exists(${.CURDIR}/games) && !defined(NOGAMES) 58SUBDIR+= games 59.endif 60.if exists(${.CURDIR}/gnu) 61SUBDIR+= gnu 62.endif 63.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 64 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 65SUBDIR+= kerberos5 66.endif 67.if exists(${.CURDIR}/libexec) 68SUBDIR+= libexec 69.endif 70.if exists(${.CURDIR}/rescue) && !defined(NO_RESCUE) 71SUBDIR+= rescue 72.endif 73.if exists(${.CURDIR}/sbin) 74SUBDIR+= sbin 75.endif 76.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) 77SUBDIR+= secure 78.endif 79.if exists(${.CURDIR}/share) && !defined(NOSHARE) 80SUBDIR+= share 81.endif 82.if exists(${.CURDIR}/sys) 83SUBDIR+= sys 84.endif 85.if exists(${.CURDIR}/usr.bin) 86SUBDIR+= usr.bin 87.endif 88.if exists(${.CURDIR}/usr.sbin) 89SUBDIR+= usr.sbin 90.endif 91 92# etc must be last for "distribute" to work 93.if exists(${.CURDIR}/etc) 94SUBDIR+= etc 95.endif 96 97# These are last, since it is nice to at least get the base system 98# rebuilt before you do them. 99.if defined(LOCAL_DIRS) 100.for _DIR in ${LOCAL_DIRS} 101.if exists(${.CURDIR}/${_DIR}) && exists(${.CURDIR}/${_DIR}/Makefile) 102SUBDIR+= ${_DIR} 103.endif 104.endfor 105.endif 106 107.if defined(SUBDIR_OVERRIDE) 108SUBDIR= ${SUBDIR_OVERRIDE} 109.endif 110 111.if defined(NOCLEANDIR) 112CLEANDIR= clean cleandepend 113.else 114CLEANDIR= cleandir 115.endif 116 117CVS?= cvs 118SUP?= /usr/local/bin/cvsup 119SUPFLAGS?= -g -L 2 -P - 120.if defined(SUPHOST) 121SUPFLAGS+= -h ${SUPHOST} 122.endif 123 124MAKEOBJDIRPREFIX?= /usr/obj 125.if !defined(OSRELDATE) 126OSRELDATE!= awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \ 127 /usr/include/osreldate.h 128.endif 129TARGET_ARCH?= ${MACHINE_ARCH} 130.if ${TARGET_ARCH} == ${MACHINE_ARCH} 131TARGET?= ${MACHINE} 132TARGET_CPUTYPE?=${CPUTYPE} 133.else 134TARGET?= ${TARGET_ARCH} 135TARGET_CPUTYPE?= 136.endif 137.if !empty(TARGET_CPUTYPE) 138_TARGET_CPUTYPE=${TARGET_CPUTYPE} 139.else 140_TARGET_CPUTYPE=dummy 141.endif 142_CPUTYPE!= ${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \ 143 CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE 144.if ${_CPUTYPE} != ${_TARGET_CPUTYPE} 145.error CPUTYPE global should be set with ?=. 146.endif 147.if make(buildworld) 148BUILD_ARCH!= sysctl -n hw.machine_arch 149.if ${MACHINE_ARCH} != ${BUILD_ARCH} 150.error To cross-build, set TARGET_ARCH. 151.endif 152.endif 153.if ${MACHINE} == ${TARGET} 154OBJTREE= ${MAKEOBJDIRPREFIX} 155.else 156OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET} 157.endif 158WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH} 159# /usr/games added for fortune which depend on strfile 160BPATH= ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games 161XPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games 162STRICTTMPPATH= ${BPATH}:${XPATH} 163TMPPATH= ${STRICTTMPPATH}:${PATH} 164 165INSTALLTMP!= /usr/bin/mktemp -d -u -t install 166 167# 168# Building a world goes through the following stages 169# 170# 1. legacy stage [BMAKE] 171# This stage is responsible for creating compatibility 172# shims that are needed by the bootstrap-tools, 173# build-tools and cross-tools stages. 174# 1. bootstrap-tools stage [BMAKE] 175# This stage is responsible for creating programs that 176# are needed for backward compatibility reasons. They 177# are not built as cross-tools. 178# 2. build-tools stage [TMAKE] 179# This stage is responsible for creating the object 180# tree and building any tools that are needed during 181# the build process. 182# 3. cross-tools stage [XMAKE] 183# This stage is responsible for creating any tools that 184# are needed for cross-builds. A cross-compiler is one 185# of them. 186# 4. world stage [WMAKE] 187# This stage actually builds the world. 188# 5. install stage (optional) [IMAKE] 189# This stage installs a previously built world. 190# 191 192BOOTSTRAPPING?= 0 193 194# Common environment for world related stages 195CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \ 196 MACHINE_ARCH=${TARGET_ARCH} \ 197 MACHINE=${TARGET} \ 198 CPUTYPE=${TARGET_CPUTYPE} \ 199 GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \ 200 GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \ 201 GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac 202 203# bootstrap-tools stage 204BMAKEENV= DESTDIR= \ 205 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 206 PATH=${BPATH}:${PATH} \ 207 WORLDTMP=${WORLDTMP} \ 208 MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}" 209BMAKE= MAKEOBJDIRPREFIX=${WORLDTMP} \ 210 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 211 BOOTSTRAPPING=${OSRELDATE} \ 212 -DNOHTML -DNOINFO -DNOLINT -DNOMAN -DNOPIC -DNOPROFILE \ 213 -DNOSHARED -DNO_CPU_CFLAGS -DNO_WARNS 214 215# build-tools stage 216TMAKE= MAKEOBJDIRPREFIX=${OBJTREE} \ 217 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 218 BOOTSTRAPPING=${OSRELDATE} -DNOLINT -DNO_CPU_CFLAGS -DNO_WARNS 219 220# cross-tools stage 221XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB 222 223# world stage 224WMAKEENV= ${CROSSENV} \ 225 DESTDIR=${WORLDTMP} \ 226 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 227 PATH=${TMPPATH} 228WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 229 230# install stage 231IMAKEENV= ${CROSSENV} \ 232 PATH=${STRICTTMPPATH}:${INSTALLTMP} 233IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 234 235# kernel stage 236KMAKEENV= ${WMAKEENV} 237 238# 239# buildworld 240# 241# Attempt to rebuild the entire system, with reasonable chance of 242# success, regardless of how old your existing system is. 243# 244_worldtmp: 245.if ${.CURDIR:C/[^,]//g} != "" 246# The m4 build of sendmail files doesn't like it if ',' is used 247# anywhere in the path of it's files. 248 @echo 249 @echo "*** Error: path to source tree contains a comma ','" 250 @echo 251 @false 252.endif 253 @echo 254 @echo "--------------------------------------------------------------" 255 @echo ">>> Rebuilding the temporary build tree" 256 @echo "--------------------------------------------------------------" 257.if !defined(NOCLEAN) 258 rm -rf ${WORLDTMP} 259.else 260 rm -rf ${WORLDTMP}/legacy/usr/include 261 # XXX - These two can depend on any header file. 262 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 263 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 264.endif 265.for _dir in \ 266 usr/bin usr/games usr/include/sys usr/lib \ 267 usr/libexec usr/sbin usr/share/dict \ 268 usr/share/groff_font/devX100 \ 269 usr/share/groff_font/devX100-12 \ 270 usr/share/groff_font/devX75 \ 271 usr/share/groff_font/devX75-12 \ 272 usr/share/groff_font/devascii \ 273 usr/share/groff_font/devcp1047 \ 274 usr/share/groff_font/devdvi \ 275 usr/share/groff_font/devhtml \ 276 usr/share/groff_font/devkoi8-r \ 277 usr/share/groff_font/devlatin1 \ 278 usr/share/groff_font/devlbp \ 279 usr/share/groff_font/devlj4 \ 280 usr/share/groff_font/devps \ 281 usr/share/groff_font/devutf8 \ 282 usr/share/tmac/mdoc usr/share/tmac/mm 283 mkdir -p ${WORLDTMP}/legacy/${_dir} 284.endfor 285.for _dir in \ 286 usr/bin usr/include usr/lib/compat/aout usr/libdata/ldscripts \ 287 usr/libexec usr/share/misc 288 mkdir -p ${WORLDTMP}/${_dir} 289.endfor 290 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ 291 -p ${WORLDTMP}/usr/include 292 ln -sf ${.CURDIR}/sys ${WORLDTMP} 293_legacy: 294 @echo 295 @echo "--------------------------------------------------------------" 296 @echo ">>> stage 1: legacy release compatibility shims" 297 @echo "--------------------------------------------------------------" 298 cd ${.CURDIR}; ${BMAKE} legacy 299_bootstrap-tools: 300 @echo 301 @echo "--------------------------------------------------------------" 302 @echo ">>> stage 1: bootstrap tools" 303 @echo "--------------------------------------------------------------" 304 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 305_cleanobj: 306.if !defined(NOCLEAN) 307 @echo 308 @echo "--------------------------------------------------------------" 309 @echo ">>> stage 2: cleaning up the object tree" 310 @echo "--------------------------------------------------------------" 311 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 312.endif 313_obj: 314 @echo 315 @echo "--------------------------------------------------------------" 316 @echo ">>> stage 2: rebuilding the object tree" 317 @echo "--------------------------------------------------------------" 318 cd ${.CURDIR}; ${WMAKE} par-obj 319_build-tools: 320 @echo 321 @echo "--------------------------------------------------------------" 322 @echo ">>> stage 2: build tools" 323 @echo "--------------------------------------------------------------" 324 cd ${.CURDIR}; ${TMAKE} build-tools 325_cross-tools: 326 @echo 327 @echo "--------------------------------------------------------------" 328 @echo ">>> stage 3: cross tools" 329 @echo "--------------------------------------------------------------" 330 cd ${.CURDIR}; ${XMAKE} cross-tools 331_includes: 332 @echo 333 @echo "--------------------------------------------------------------" 334 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include" 335 @echo "--------------------------------------------------------------" 336 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 337_libraries: 338 @echo 339 @echo "--------------------------------------------------------------" 340 @echo ">>> stage 4: building libraries" 341 @echo "--------------------------------------------------------------" 342 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG -DNOLINT \ 343 libraries 344_depend: 345 @echo 346 @echo "--------------------------------------------------------------" 347 @echo ">>> stage 4: make dependencies" 348 @echo "--------------------------------------------------------------" 349 cd ${.CURDIR}; ${WMAKE} par-depend 350everything: 351 @echo 352 @echo "--------------------------------------------------------------" 353 @echo ">>> stage 4: building everything.." 354 @echo "--------------------------------------------------------------" 355 cd ${.CURDIR}; ${WMAKE} par-all 356 357 358WMAKE_TGTS= 359.if !defined(SUBDIR_OVERRIDE) 360WMAKE_TGTS+= _worldtmp _legacy _bootstrap-tools 361.endif 362WMAKE_TGTS+= _cleanobj _obj _build-tools 363.if !defined(SUBDIR_OVERRIDE) 364WMAKE_TGTS+= _cross-tools 365.endif 366WMAKE_TGTS+= _includes _libraries _depend everything 367 368buildworld: ${WMAKE_TGTS} 369.ORDER: ${WMAKE_TGTS} 370 371# 372# installcheck 373# 374# Checks to be sure system is ready for installworld 375# 376installcheck: 377.if !defined(NO_SENDMAIL) 378 @if ! `id -u smmsp > /dev/null`; then \ 379 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \ 380 false; \ 381 fi 382 @if ! `id -g smmsp > /dev/null`; then \ 383 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \ 384 false; \ 385 fi 386.endif 387.if ${TARGET_ARCH} == ${MACHINE_ARCH} && !defined(DISTDIR) && \ 388 (!defined(DESTDIR) || empty(DESTDIR) || ${DESTDIR} == "/") 389 @echo "Checking to see if your booted kernel is fresh enough.." 390 ${.OBJDIR}/bin/sh/sh -c \ 391 'echo "Testing installed kernel for new sigaction(2) syscall"' 392 @echo "Seems ok.." 393.endif 394 395# 396# distributeworld 397# 398# Distributes everything compiled by a `buildworld'. 399# 400# installworld 401# 402# Installs everything compiled by a 'buildworld'. 403# 404distributeworld installworld: installcheck 405 mkdir -p ${INSTALLTMP} 406 for prog in [ awk cap_mkdb cat chflags chmod chown \ 407 date echo egrep find grep \ 408 ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \ 409 test true uname wc zic; do \ 410 cp `which $$prog` ${INSTALLTMP}; \ 411 done 412 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 413 rm -rf ${INSTALLTMP} 414 415# 416# reinstall 417# 418# If you have a build server, you can NFS mount the source and obj directories 419# and do a 'make reinstall' on the *client* to install new binaries from the 420# most recent server build. 421# 422reinstall: 423 @echo "--------------------------------------------------------------" 424 @echo ">>> Making hierarchy" 425 @echo "--------------------------------------------------------------" 426 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 427 @echo 428 @echo "--------------------------------------------------------------" 429 @echo ">>> Installing everything.." 430 @echo "--------------------------------------------------------------" 431 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 432.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN) 433 @echo 434 @echo "--------------------------------------------------------------" 435 @echo ">>> Rebuilding man page indices" 436 @echo "--------------------------------------------------------------" 437 cd ${.CURDIR}/share/man; ${MAKE} makedb 438.endif 439 440redistribute: 441 @echo "--------------------------------------------------------------" 442 @echo ">>> Distributing everything.." 443 @echo "--------------------------------------------------------------" 444 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute 445 446# 447# buildkernel and installkernel 448# 449# Which kernels to build and/or install is specified by setting 450# KERNCONF. If not defined a GENERIC kernel is built/installed. 451# Only the existing (depending TARGET) config files are used 452# for building kernels and only the first of these is designated 453# as the one being installed. 454# 455# Note that we have to use TARGET instead of TARGET_ARCH when 456# we're in kernel-land. Since only TARGET_ARCH is (expected) to 457# be set to cross-build, we have to make sure TARGET is set 458# properly. 459 460.if !defined(KERNCONF) && defined(KERNEL) 461KERNCONF= ${KERNEL} 462KERNWARN= yes 463.else 464KERNCONF?= GENERIC 465.endif 466INSTKERNNAME?= kernel 467 468KERNSRCDIR?= ${.CURDIR}/sys 469KRNLCONFDIR= ${KERNSRCDIR}/${TARGET}/conf 470KRNLOBJDIR= ${OBJTREE}${KERNSRCDIR} 471KERNCONFDIR?= ${KRNLCONFDIR} 472 473BUILDKERNELS= 474INSTALLKERNEL= 475.for _kernel in ${KERNCONF} 476.if exists(${KERNCONFDIR}/${_kernel}) 477BUILDKERNELS+= ${_kernel} 478.if empty(INSTALLKERNEL) 479INSTALLKERNEL= ${_kernel} 480.endif 481.endif 482.endfor 483 484# 485# buildkernel 486# 487# Builds all kernels defined by BUILDKERNELS. 488# 489buildkernel: 490.if empty(BUILDKERNELS) 491 @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF})."; 492 @false 493.endif 494.if defined(KERNWARN) 495 @echo "--------------------------------------------------------------" 496 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 497 @echo "--------------------------------------------------------------" 498 @sleep 3 499.endif 500 @echo 501.for _kernel in ${BUILDKERNELS} 502 @echo "--------------------------------------------------------------" 503 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 504 @echo "--------------------------------------------------------------" 505 @echo "===> ${_kernel}" 506 mkdir -p ${KRNLOBJDIR} 507.if !defined(NO_KERNELCONFIG) 508 cd ${KRNLCONFDIR}; \ 509 PATH=${TMPPATH} \ 510 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 511 ${KERNCONFDIR}/${_kernel} 512.endif 513.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 514 cd ${KRNLOBJDIR}/${_kernel}; \ 515 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${CLEANDIR} 516.endif 517 cd ${KRNLOBJDIR}/${_kernel}; \ 518 MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \ 519 ${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile 520 cd ${KRNLOBJDIR}/${_kernel}; \ 521 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} obj 522# XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case. 523.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules) 524.for target in obj depend all 525 cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \ 526 MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \ 527 ${MAKE} -DNO_CPU_CFLAGS ${target} 528.endfor 529.endif 530.if !defined(NO_KERNELDEPEND) 531 cd ${KRNLOBJDIR}/${_kernel}; \ 532 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ 533.endif 534 cd ${KRNLOBJDIR}/${_kernel}; \ 535 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ 536 @echo "--------------------------------------------------------------" 537 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 538 @echo "--------------------------------------------------------------" 539.endfor 540 541# 542# installkernel 543# 544# Install the kernel defined by INSTALLKERNEL 545# 546installkernel reinstallkernel installkernel.debug reinstallkernel.debug: 547.if empty(INSTALLKERNEL) 548 @echo "ERROR: No kernel \"${KERNCONF}\" to install." 549 @false 550.endif 551 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 552 ${CROSSENV} PATH=${TMPPATH} \ 553 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel//} 554 555# 556# update 557# 558# Update the source tree, by running sup and/or running cvs to update to the 559# latest copy. 560# 561update: 562.if defined(SUP_UPDATE) 563 @echo "--------------------------------------------------------------" 564 @echo ">>> Running ${SUP}" 565 @echo "--------------------------------------------------------------" 566.if defined(SUPFILE) 567 @${SUP} ${SUPFLAGS} ${SUPFILE} 568.endif 569.if defined(SUPFILE1) 570 @${SUP} ${SUPFLAGS} ${SUPFILE1} 571.endif 572.if defined(SUPFILE2) 573 @${SUP} ${SUPFLAGS} ${SUPFILE2} 574.endif 575.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE) 576 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE} 577.endif 578.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE) 579 @${SUP} ${SUPFLAGS} ${DOCSUPFILE} 580.endif 581.endif 582.if defined(CVS_UPDATE) 583 @echo "--------------------------------------------------------------" 584 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT} 585 @echo "--------------------------------------------------------------" 586 cd ${.CURDIR}; ${CVS} -R -q update -A -P -d 587.endif 588 589# 590# most 591# 592# Build most of the user binaries on the existing system libs and includes. 593# 594most: 595 @echo "--------------------------------------------------------------" 596 @echo ">>> Building programs only" 597 @echo "--------------------------------------------------------------" 598.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 599 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all 600.endfor 601 602# 603# installmost 604# 605# Install the binaries built by the 'most' target. This does not include 606# libraries or include files. 607# 608installmost: 609 @echo "--------------------------------------------------------------" 610 @echo ">>> Installing programs only" 611 @echo "--------------------------------------------------------------" 612.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 613 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install 614.endfor 615 616# 617# ------------------------------------------------------------------------ 618# 619# From here onwards are utility targets used by the 'make world' and 620# related targets. If your 'world' breaks, you may like to try to fix 621# the problem and manually run the following targets to attempt to 622# complete the build. Beware, this is *not* guaranteed to work, you 623# need to have a pretty good grip on the current state of the system 624# to attempt to manually finish it. If in doubt, 'make world' again. 625# 626 627# 628# legacy: Build compatibility shims for the next three targets 629# 630legacy: 631.for _tool in tools/build 632 @${ECHODIR} "===> ${_tool}"; \ 633 cd ${.CURDIR}/${_tool}; \ 634 ${MAKE} DIRPRFX=${_tool}/ obj; \ 635 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \ 636 ${MAKE} DIRPRFX=${_tool}/ depend; \ 637 ${MAKE} DIRPRFX=${_tool}/ all; \ 638 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install 639.endfor 640 641# 642# bootstrap-tools: Build tools needed for compatibility 643# 644.if exists(${.CURDIR}/games) && !defined(NOGAMES) 645_strfile= games/fortune/strfile 646.endif 647 648.if !defined(NO_CXX) 649_gperf= gnu/usr.bin/gperf 650.if ${BOOTSTRAPPING} < 500113 651_groff= gnu/usr.bin/groff 652.else 653_groff= gnu/usr.bin/groff/tmac 654.endif 655.endif 656 657.if ${BOOTSTRAPPING} < 450005 || \ 658 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500034 659_uudecode= usr.bin/uudecode 660.endif 661 662.if ${BOOTSTRAPPING} < 430002 || \ 663 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500019 664_xargs= usr.bin/xargs 665.endif 666 667.if ${BOOTSTRAPPING} < 430002 || \ 668 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500018 669_yacc= usr.bin/yacc 670.endif 671 672.if !defined(NO_RESCUE) && \ 673 ${BOOTSTRAPPING} < 501100 674_crunchgen= usr.sbin/crunch/crunchgen 675.endif 676 677.if ${BOOTSTRAPPING} < 500019 678_kbdcontrol= usr.sbin/kbdcontrol 679.endif 680 681bootstrap-tools: 682.for _tool in \ 683 ${_strfile} \ 684 ${_gperf} \ 685 ${_groff} \ 686 gnu/usr.bin/texinfo \ 687 usr.bin/colldef \ 688 usr.bin/makewhatis \ 689 usr.bin/rpcgen \ 690 ${_uudecode} \ 691 ${_xargs} \ 692 usr.bin/xinstall \ 693 ${_yacc} \ 694 usr.sbin/config \ 695 ${_crunchgen} \ 696 ${_kbdcontrol} 697 @${ECHODIR} "===> ${_tool}"; \ 698 cd ${.CURDIR}/${_tool}; \ 699 ${MAKE} DIRPRFX=${_tool}/ obj; \ 700 ${MAKE} DIRPRFX=${_tool}/ depend; \ 701 ${MAKE} DIRPRFX=${_tool}/ all; \ 702 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install 703.endfor 704 705# 706# build-tools: Build special purpose build tools 707# 708.if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules) 709_aicasm= sys/modules/aic7xxx/aicasm 710.endif 711 712.if exists(${.CURDIR}/share) && !defined(NOSHARE) 713_share= share/syscons/scrnmaps 714.endif 715 716.if !defined(NO_FORTRAN) 717_fortran= gnu/usr.bin/cc/f771 718.endif 719 720.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 721 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 722_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \ 723 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl 724.endif 725 726.if exists(${.CURDIR}/rescue) && !defined(NO_RESCUE) 727_rescue= rescue/rescue 728.endif 729 730build-tools: 731.for _tool in \ 732 bin/csh \ 733 bin/sh \ 734 ${_rescue} \ 735 gnu/usr.bin/cc/cc_tools \ 736 ${_fortran} \ 737 ${_libkrb5} \ 738 lib/libncurses \ 739 ${_share} \ 740 ${_aicasm} \ 741 usr.bin/awk \ 742 usr.bin/file \ 743 usr.sbin/sysinstall 744 @${ECHODIR} "===> ${_tool}"; \ 745 cd ${.CURDIR}/${_tool}; \ 746 ${MAKE} DIRPRFX=${_tool}/ obj; \ 747 ${MAKE} DIRPRFX=${_tool}/ build-tools 748.endfor 749 750# 751# cross-tools: Build cross-building tools 752# 753.if ${TARGET_ARCH} == "sparc64" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \ 754 ${BOOTSTRAPPING} < 500037 755_elf2aout= usr.bin/elf2aout 756.endif 757 758.if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} 759_btxld= usr.sbin/btxld 760.endif 761 762.if (!defined(NO_RESCUE) || \ 763 defined(RELEASEDIR)) && \ 764 ( ${TARGET_ARCH} != ${MACHINE_ARCH} || ${BOOTSTRAPPING} < 501101 ) 765_crunchide= usr.sbin/crunch/crunchide 766.endif 767 768.if ${TARGET_ARCH} == "alpha" && ${TARGET_ARCH} != ${MACHINE_ARCH} 769_elf2exe= usr.sbin/elf2exe 770.endif 771 772.if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \ 773 defined(RELEASEDIR) 774_kgzip= usr.sbin/kgzip 775.endif 776 777cross-tools: 778.for _tool in \ 779 gnu/usr.bin/binutils \ 780 gnu/usr.bin/cc \ 781 ${_elf2aout} \ 782 usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint \ 783 ${_btxld} \ 784 ${_crunchide} \ 785 ${_elf2exe} \ 786 ${_kgzip} 787 @${ECHODIR} "===> ${_tool}"; \ 788 cd ${.CURDIR}/${_tool}; \ 789 ${MAKE} DIRPRFX=${_tool}/ obj; \ 790 ${MAKE} DIRPRFX=${_tool}/ depend; \ 791 ${MAKE} DIRPRFX=${_tool}/ all; \ 792 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 793.endfor 794 795# 796# hierarchy - ensure that all the needed directories are present 797# 798hierarchy: 799 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 800 801# 802# libraries - build all libraries, and install them under ${DESTDIR}. 803# 804# The list of libraries with dependents (${_prebuild_libs}) and their 805# interdependencies (__L) are built automatically by the 806# ${.CURDIR}/tools/make_libdeps.sh script. 807# 808libraries: 809 cd ${.CURDIR}; \ 810 ${MAKE} -f Makefile.inc1 _startup_libs; \ 811 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 812 ${MAKE} -f Makefile.inc1 _generic_libs; 813 814# These dependencies are not automatically generated: 815# 816# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all 817# shared libraries for ELF. 818# 819# lib/libc (libc_pic.a) must be built before lib/libpthread. 820# 821_startup_libs= gnu/lib/csu gnu/lib/libgcc 822.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf) 823_startup_libs+= lib/csu/${MACHINE_ARCH}-elf 824.else 825_startup_libs+= lib/csu/${MACHINE_ARCH} 826.endif 827 828_prebuild_libs= 829_generic_libs= gnu/lib 830 831.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 832 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 833_prebuild_libs+= kerberos5/lib/libasn1 834_prebuild_libs+= kerberos5/lib/libgssapi 835_prebuild_libs+= kerberos5/lib/libkrb5 836_prebuild_libs+= kerberos5/lib/libroken 837_generic_libs+= kerberos5/lib 838.endif 839 840.if !defined(NOLIBPTHREAD) 841_prebuild_libs+= lib/libc 842.endif 843_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libexpat \ 844 lib/libkvm lib/libmd \ 845 lib/libncurses lib/libopie lib/libpam lib/libradius \ 846 lib/librpcsvc \ 847 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \ 848 lib/libz lib/msun 849 850lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 851lib/libypclnt__L: lib/librpcsvc__L 852 853_generic_libs+= lib 854 855.if !defined(NOCRYPT) 856.if !defined(NO_OPENSSL) 857_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl 858.if !defined(NO_OPENSSH) 859_prebuild_libs+= secure/lib/libssh 860secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L 861.endif 862.endif 863_generic_libs+= secure/lib 864.endif 865 866_generic_libs+= usr.bin/lex/lib 867 868.if ${MACHINE_ARCH} == "i386" 869_generic_libs+= usr.sbin/pcvt/keycap 870.endif 871 872.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs} 873${_lib}__L: .PHONY 874.if exists(${.CURDIR}/${_lib}) 875 @${ECHODIR} "===> ${_lib}"; \ 876 cd ${.CURDIR}/${_lib}; \ 877 ${MAKE} DIRPRFX=${_lib}/ depend; \ 878 ${MAKE} DIRPRFX=${_lib}/ all; \ 879 ${MAKE} DIRPRFX=${_lib}/ install 880.endif 881.endfor 882 883# libpam is special: we need to build static PAM modules before 884# static PAM library, and dynamic PAM library before dynamic PAM 885# modules. 886lib/libpam__L: .PHONY 887 @${ECHODIR} "===> lib/libpam"; \ 888 cd ${.CURDIR}/lib/libpam; \ 889 ${MAKE} DIRPRFX=lib/libpam/ depend; \ 890 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \ 891 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install 892 893_startup_libs: ${_startup_libs:S/$/__L/} 894_prebuild_libs: ${_prebuild_libs:S/$/__L/} 895_generic_libs: ${_generic_libs:S/$/__L/} 896 897.for __target in all clean cleandepend cleandir depend includes obj 898.for entry in ${SUBDIR} 899${entry}.${__target}__D: .PHONY 900 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 901 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 902 edir=${entry}.${MACHINE_ARCH}; \ 903 cd ${.CURDIR}/$${edir}; \ 904 else \ 905 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 906 edir=${entry}; \ 907 cd ${.CURDIR}/$${edir}; \ 908 fi; \ 909 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 910.endfor 911par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 912.endfor 913 914.include <bsd.subdir.mk> 915