Makefile.inc1 revision 117449
1# 2# $FreeBSD: head/Makefile.inc1 117449 2003-07-11 16:57:43Z gordon $ 3# 4# Make command line options: 5# -DNO_KERBEROS Do not build Heimdal (Kerberos 5) 6# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir 7# -DNOCLEAN do not clean at all 8# -DNOCRYPT will prevent building of crypt versions 9# -DNOMAN do not build the manual pages 10# -DNOPROFILE do not build profiled libraries 11# -DNORESCUE do not build rescue binaries 12# -DNOGAMES do not go into games subdir 13# -DNOSHARE do not go into share subdir 14# -DNOINFO do not make or install info files 15# -DNOLIBC_R do not build libc_r. 16# -DNO_FORTRAN do not build g77 and related libraries. 17# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel 18# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel 19# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel 20# -DNO_PORTSUPDATE do not update ports in ${MAKE} update 21# -DNO_DOCUPDATE do not update doc in ${MAKE} update 22# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list 23# TARGET_ARCH="arch" to crossbuild world to a different arch 24 25# 26# The intended user-driven targets are: 27# buildworld - rebuild *everything*, including glue to help do upgrades 28# installworld- install everything built by "buildworld" 29# update - convenient way to update your source tree (eg: sup/cvs) 30# most - build user commands, no libraries or include files 31# installmost - install user commands, no libraries or include files 32# 33# Standard targets (not defined here) are documented in the makefiles in 34# /usr/share/mk. These include: 35# obj depend all install clean cleandepend cleanobj 36 37# Put initial settings here. 38SUBDIR= 39 40# We must do share/info early so that installation of info `dir' 41# entries works correctly. Do it first since it is less likely to 42# grow dependencies on include and lib than vice versa. 43.if exists(${.CURDIR}/share/info) 44SUBDIR+= share/info 45.endif 46 47.if exists(${.CURDIR}/include) 48SUBDIR+= include 49.endif 50.if exists(${.CURDIR}/lib) 51SUBDIR+= lib 52.endif 53 54.if exists(${.CURDIR}/bin) 55SUBDIR+= bin 56.endif 57.if exists(${.CURDIR}/games) && !defined(NOGAMES) 58SUBDIR+= games 59.endif 60.if exists(${.CURDIR}/gnu) 61SUBDIR+= gnu 62.endif 63.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 64 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 65SUBDIR+= kerberos5 66.endif 67.if exists(${.CURDIR}/libexec) 68SUBDIR+= libexec 69.endif 70.if exists(${.CURDIR}/rescue) && !defined(NORESCUE) 71SUBDIR+= rescue 72.endif 73.if exists(${.CURDIR}/sbin) 74SUBDIR+= sbin 75.endif 76.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) 77SUBDIR+= secure 78.endif 79.if exists(${.CURDIR}/share) && !defined(NOSHARE) 80SUBDIR+= share 81.endif 82.if exists(${.CURDIR}/sys) 83SUBDIR+= sys 84.endif 85.if exists(${.CURDIR}/usr.bin) 86SUBDIR+= usr.bin 87.endif 88.if exists(${.CURDIR}/usr.sbin) 89SUBDIR+= usr.sbin 90.endif 91 92# etc must be last for "distribute" to work 93.if exists(${.CURDIR}/etc) 94SUBDIR+= etc 95.endif 96 97# These are last, since it is nice to at least get the base system 98# rebuilt before you do them. 99.if defined(LOCAL_DIRS) 100.for _DIR in ${LOCAL_DIRS} 101.if exists(${.CURDIR}/${_DIR}) && exists(${.CURDIR}/${_DIR}/Makefile) 102SUBDIR+= ${_DIR} 103.endif 104.endfor 105.endif 106 107.if defined(SUBDIR_OVERRIDE) 108SUBDIR= ${SUBDIR_OVERRIDE} 109.endif 110 111.if defined(NOCLEANDIR) 112CLEANDIR= clean cleandepend 113.else 114CLEANDIR= cleandir 115.endif 116 117CVS?= cvs 118SUP?= /usr/local/bin/cvsup 119SUPFLAGS?= -g -L 2 -P - 120.if defined(SUPHOST) 121SUPFLAGS+= -h ${SUPHOST} 122.endif 123 124MAKEOBJDIRPREFIX?= /usr/obj 125.if !defined(OSRELDATE) 126OSRELDATE!= awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \ 127 /usr/include/osreldate.h 128.endif 129TARGET_ARCH?= ${MACHINE_ARCH} 130.if ${TARGET_ARCH} == ${MACHINE_ARCH} 131TARGET?= ${MACHINE} 132TARGET_CPUTYPE?=${CPUTYPE} 133.else 134TARGET?= ${TARGET_ARCH} 135TARGET_CPUTYPE?= 136.endif 137.if !empty(TARGET_CPUTYPE) 138_TARGET_CPUTYPE=${TARGET_CPUTYPE} 139.else 140_TARGET_CPUTYPE=dummy 141.endif 142_CPUTYPE!= ${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \ 143 CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE 144.if ${_CPUTYPE} != ${_TARGET_CPUTYPE} 145.error CPUTYPE global should be set with ?=. 146.endif 147.if make(buildworld) 148BUILD_ARCH!= sysctl -n hw.machine_arch 149.if ${MACHINE_ARCH} != ${BUILD_ARCH} 150.error To cross-build, set TARGET_ARCH. 151.endif 152.endif 153.if ${MACHINE} == ${TARGET} 154OBJTREE= ${MAKEOBJDIRPREFIX} 155.else 156OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET} 157.endif 158WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH} 159# /usr/games added for fortune which depend on strfile 160BPATH= ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games 161XPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games 162STRICTTMPPATH= ${BPATH}:${XPATH} 163TMPPATH= ${STRICTTMPPATH}:${PATH} 164 165INSTALLTMP!= /usr/bin/mktemp -d -u -t install 166 167# 168# Building a world goes through the following stages 169# 170# 1. legacy stage [BMAKE] 171# This stage is responsible for creating compatibility 172# shims that are needed by the bootstrap-tools, 173# build-tools and cross-tools stages. 174# 1. bootstrap-tools stage [BMAKE] 175# This stage is responsible for creating programs that 176# are needed for backward compatibility reasons. They 177# are not built as cross-tools. 178# 2. build-tools stage [TMAKE] 179# This stage is responsible for creating the object 180# tree and building any tools that are needed during 181# the build process. 182# 3. cross-tools stage [XMAKE] 183# This stage is responsible for creating any tools that 184# are needed for cross-builds. A cross-compiler is one 185# of them. 186# 4. world stage [WMAKE] 187# This stage actually builds the world. 188# 5. install stage (optional) [IMAKE] 189# This stage installs a previously built world. 190# 191 192BOOTSTRAPPING?= 0 193 194# Common environment for world related stages 195CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \ 196 MACHINE_ARCH=${TARGET_ARCH} \ 197 MACHINE=${TARGET} \ 198 CPUTYPE=${TARGET_CPUTYPE} \ 199 GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \ 200 GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \ 201 GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac 202 203# bootstrap-tools stage 204BMAKEENV= DESTDIR= \ 205 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 206 PATH=${BPATH}:${PATH} \ 207 WORLDTMP=${WORLDTMP} \ 208 MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}" 209BMAKE= MAKEOBJDIRPREFIX=${WORLDTMP} \ 210 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 211 BOOTSTRAPPING=${OSRELDATE} \ 212 -DNOHTML -DNOINFO -DNOLINT -DNOMAN -DNOPIC -DNOPROFILE \ 213 -DNOSHARED -DNO_CPU_CFLAGS -DNO_WARNS 214 215# build-tools stage 216TMAKE= MAKEOBJDIRPREFIX=${OBJTREE} \ 217 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 218 BOOTSTRAPPING=${OSRELDATE} -DNOLINT -DNO_CPU_CFLAGS -DNO_WARNS 219 220# cross-tools stage 221XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB 222 223# world stage 224WMAKEENV= ${CROSSENV} \ 225 DESTDIR=${WORLDTMP} \ 226 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 227 PATH=${TMPPATH} 228WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 229 230# install stage 231IMAKEENV= ${CROSSENV} \ 232 PATH=${STRICTTMPPATH}:${INSTALLTMP} 233IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 234 235# kernel stage 236KMAKEENV= ${WMAKEENV} 237 238# 239# buildworld 240# 241# Attempt to rebuild the entire system, with reasonable chance of 242# success, regardless of how old your existing system is. 243# 244_worldtmp: 245.if ${.CURDIR:C/[^,]//g} != "" 246# The m4 build of sendmail files doesn't like it if ',' is used 247# anywhere in the path of it's files. 248 @echo 249 @echo "*** Error: path to source tree contains a comma ','" 250 @echo 251 @false 252.endif 253 @echo 254 @echo "--------------------------------------------------------------" 255 @echo ">>> Rebuilding the temporary build tree" 256 @echo "--------------------------------------------------------------" 257.if !defined(NOCLEAN) 258 rm -rf ${WORLDTMP} 259.else 260 rm -rf ${WORLDTMP}/legacy/usr/include 261 # XXX - These two can depend on any header file. 262 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 263 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 264.endif 265.for _dir in \ 266 usr/bin usr/games usr/include/sys usr/lib \ 267 usr/libexec usr/sbin usr/share/dict \ 268 usr/share/groff_font/devX100 \ 269 usr/share/groff_font/devX100-12 \ 270 usr/share/groff_font/devX75 \ 271 usr/share/groff_font/devX75-12 \ 272 usr/share/groff_font/devascii \ 273 usr/share/groff_font/devcp1047 \ 274 usr/share/groff_font/devdvi \ 275 usr/share/groff_font/devhtml \ 276 usr/share/groff_font/devkoi8-r \ 277 usr/share/groff_font/devlatin1 \ 278 usr/share/groff_font/devlbp \ 279 usr/share/groff_font/devlj4 \ 280 usr/share/groff_font/devps \ 281 usr/share/groff_font/devutf8 \ 282 usr/share/tmac/mdoc usr/share/tmac/mm 283 mkdir -p ${WORLDTMP}/legacy/${_dir} 284.endfor 285.for _dir in \ 286 usr/bin usr/include usr/lib/compat/aout usr/libdata/ldscripts \ 287 usr/libexec usr/share/misc 288 mkdir -p ${WORLDTMP}/${_dir} 289.endfor 290 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ 291 -p ${WORLDTMP}/usr/include 292 ln -sf ${.CURDIR}/sys ${WORLDTMP} 293_legacy: 294 @echo 295 @echo "--------------------------------------------------------------" 296 @echo ">>> stage 1: legacy release compatibility shims" 297 @echo "--------------------------------------------------------------" 298 cd ${.CURDIR}; ${BMAKE} legacy 299_bootstrap-tools: 300 @echo 301 @echo "--------------------------------------------------------------" 302 @echo ">>> stage 1: bootstrap tools" 303 @echo "--------------------------------------------------------------" 304 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 305_cleanobj: 306.if !defined(NOCLEAN) 307 @echo 308 @echo "--------------------------------------------------------------" 309 @echo ">>> stage 2: cleaning up the object tree" 310 @echo "--------------------------------------------------------------" 311 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 312.endif 313_obj: 314 @echo 315 @echo "--------------------------------------------------------------" 316 @echo ">>> stage 2: rebuilding the object tree" 317 @echo "--------------------------------------------------------------" 318 cd ${.CURDIR}; ${WMAKE} par-obj 319_build-tools: 320 @echo 321 @echo "--------------------------------------------------------------" 322 @echo ">>> stage 2: build tools" 323 @echo "--------------------------------------------------------------" 324 cd ${.CURDIR}; ${TMAKE} build-tools 325_cross-tools: 326 @echo 327 @echo "--------------------------------------------------------------" 328 @echo ">>> stage 3: cross tools" 329 @echo "--------------------------------------------------------------" 330 cd ${.CURDIR}; ${XMAKE} cross-tools 331_includes: 332 @echo 333 @echo "--------------------------------------------------------------" 334 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include" 335 @echo "--------------------------------------------------------------" 336 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 337_libraries: 338 @echo 339 @echo "--------------------------------------------------------------" 340 @echo ">>> stage 4: building libraries" 341 @echo "--------------------------------------------------------------" 342 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries 343_depend: 344 @echo 345 @echo "--------------------------------------------------------------" 346 @echo ">>> stage 4: make dependencies" 347 @echo "--------------------------------------------------------------" 348 cd ${.CURDIR}; ${WMAKE} par-depend 349everything: 350 @echo 351 @echo "--------------------------------------------------------------" 352 @echo ">>> stage 4: building everything.." 353 @echo "--------------------------------------------------------------" 354 cd ${.CURDIR}; ${WMAKE} par-all 355 356 357WMAKE_TGTS= 358.if !defined(SUBDIR_OVERRIDE) 359WMAKE_TGTS+= _worldtmp _legacy _bootstrap-tools 360.endif 361WMAKE_TGTS+= _cleanobj _obj _build-tools 362.if !defined(SUBDIR_OVERRIDE) 363WMAKE_TGTS+= _cross-tools 364.endif 365WMAKE_TGTS+= _includes _libraries _depend everything 366 367buildworld: ${WMAKE_TGTS} 368.ORDER: ${WMAKE_TGTS} 369 370# 371# installcheck 372# 373# Checks to be sure system is ready for installworld 374# 375installcheck: 376.if !defined(NO_SENDMAIL) 377 @if ! `id -u smmsp > /dev/null`; then \ 378 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \ 379 false; \ 380 fi 381 @if ! `id -g smmsp > /dev/null`; then \ 382 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \ 383 false; \ 384 fi 385.endif 386.if ${TARGET_ARCH} == ${MACHINE_ARCH} && !defined(DISTDIR) && \ 387 (!defined(DESTDIR) || empty(DESTDIR) || ${DESTDIR} == "/") 388 @echo "Checking to see if your booted kernel is fresh enough.." 389 ${.OBJDIR}/bin/sh/sh -c \ 390 'echo "Testing installed kernel for new sigaction(2) syscall"' 391 @echo "Seems ok.." 392.endif 393 394# 395# distributeworld 396# 397# Distributes everything compiled by a `buildworld'. 398# 399# installworld 400# 401# Installs everything compiled by a 'buildworld'. 402# 403distributeworld installworld: installcheck 404 mkdir -p ${INSTALLTMP} 405 for prog in [ awk cap_mkdb cat chflags chmod chown \ 406 date echo egrep find grep \ 407 ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \ 408 test true uname wc zic; do \ 409 cp `which $$prog` ${INSTALLTMP}; \ 410 done 411 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 412 rm -rf ${INSTALLTMP} 413 414# 415# reinstall 416# 417# If you have a build server, you can NFS mount the source and obj directories 418# and do a 'make reinstall' on the *client* to install new binaries from the 419# most recent server build. 420# 421reinstall: 422 @echo "--------------------------------------------------------------" 423 @echo ">>> Making hierarchy" 424 @echo "--------------------------------------------------------------" 425 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 426 @echo 427 @echo "--------------------------------------------------------------" 428 @echo ">>> Installing everything.." 429 @echo "--------------------------------------------------------------" 430 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 431.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN) 432 @echo 433 @echo "--------------------------------------------------------------" 434 @echo ">>> Rebuilding man page indices" 435 @echo "--------------------------------------------------------------" 436 cd ${.CURDIR}/share/man; ${MAKE} makedb 437.endif 438 439redistribute: 440 @echo "--------------------------------------------------------------" 441 @echo ">>> Distributing everything.." 442 @echo "--------------------------------------------------------------" 443 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute 444 445# 446# buildkernel and installkernel 447# 448# Which kernels to build and/or install is specified by setting 449# KERNCONF. If not defined a GENERIC kernel is built/installed. 450# Only the existing (depending TARGET) config files are used 451# for building kernels and only the first of these is designated 452# as the one being installed. 453# 454# Note that we have to use TARGET instead of TARGET_ARCH when 455# we're in kernel-land. Since only TARGET_ARCH is (expected) to 456# be set to cross-build, we have to make sure TARGET is set 457# properly. 458 459.if !defined(KERNCONF) && defined(KERNEL) 460KERNCONF= ${KERNEL} 461KERNWARN= yes 462.else 463KERNCONF?= GENERIC 464.endif 465INSTKERNNAME?= kernel 466 467KERNSRCDIR?= ${.CURDIR}/sys 468KRNLCONFDIR= ${KERNSRCDIR}/${TARGET}/conf 469KRNLOBJDIR= ${OBJTREE}${KERNSRCDIR} 470KERNCONFDIR?= ${KRNLCONFDIR} 471 472BUILDKERNELS= 473INSTALLKERNEL= 474.for _kernel in ${KERNCONF} 475.if exists(${KERNCONFDIR}/${_kernel}) 476BUILDKERNELS+= ${_kernel} 477.if empty(INSTALLKERNEL) 478INSTALLKERNEL= ${_kernel} 479.endif 480.endif 481.endfor 482 483# 484# buildkernel 485# 486# Builds all kernels defined by BUILDKERNELS. 487# 488buildkernel: 489.if empty(BUILDKERNELS) 490 @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF})."; 491 @false 492.endif 493.if defined(KERNWARN) 494 @echo "--------------------------------------------------------------" 495 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 496 @echo "--------------------------------------------------------------" 497 @sleep 3 498.endif 499 @echo 500.for _kernel in ${BUILDKERNELS} 501 @echo "--------------------------------------------------------------" 502 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 503 @echo "--------------------------------------------------------------" 504 @echo "===> ${_kernel}" 505 mkdir -p ${KRNLOBJDIR} 506.if !defined(NO_KERNELCONFIG) 507 cd ${KRNLCONFDIR}; \ 508 PATH=${TMPPATH} \ 509 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 510 ${KERNCONFDIR}/${_kernel} 511.endif 512.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 513 cd ${KRNLOBJDIR}/${_kernel}; \ 514 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${CLEANDIR} 515.endif 516 cd ${KRNLOBJDIR}/${_kernel}; \ 517 MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \ 518 ${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile 519 cd ${KRNLOBJDIR}/${_kernel}; \ 520 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} obj 521# XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case. 522.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules) 523.for target in obj depend all 524 cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \ 525 MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \ 526 ${MAKE} -DNO_CPU_CFLAGS ${target} 527.endfor 528.endif 529.if !defined(NO_KERNELDEPEND) 530 cd ${KRNLOBJDIR}/${_kernel}; \ 531 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ 532.endif 533 cd ${KRNLOBJDIR}/${_kernel}; \ 534 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ 535 @echo "--------------------------------------------------------------" 536 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 537 @echo "--------------------------------------------------------------" 538.endfor 539 540# 541# installkernel 542# 543# Install the kernel defined by INSTALLKERNEL 544# 545installkernel reinstallkernel installkernel.debug reinstallkernel.debug: 546.if empty(INSTALLKERNEL) 547 @echo "ERROR: No kernel \"${KERNCONF}\" to install." 548 @false 549.endif 550 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 551 ${CROSSENV} PATH=${TMPPATH} \ 552 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel//} 553 554# 555# update 556# 557# Update the source tree, by running sup and/or running cvs to update to the 558# latest copy. 559# 560update: 561.if defined(SUP_UPDATE) 562 @echo "--------------------------------------------------------------" 563 @echo ">>> Running ${SUP}" 564 @echo "--------------------------------------------------------------" 565.if defined(SUPFILE) 566 @${SUP} ${SUPFLAGS} ${SUPFILE} 567.endif 568.if defined(SUPFILE1) 569 @${SUP} ${SUPFLAGS} ${SUPFILE1} 570.endif 571.if defined(SUPFILE2) 572 @${SUP} ${SUPFLAGS} ${SUPFILE2} 573.endif 574.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE) 575 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE} 576.endif 577.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE) 578 @${SUP} ${SUPFLAGS} ${DOCSUPFILE} 579.endif 580.endif 581.if defined(CVS_UPDATE) 582 @echo "--------------------------------------------------------------" 583 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT} 584 @echo "--------------------------------------------------------------" 585 cd ${.CURDIR}; ${CVS} -R -q update -A -P -d 586.endif 587 588# 589# most 590# 591# Build most of the user binaries on the existing system libs and includes. 592# 593most: 594 @echo "--------------------------------------------------------------" 595 @echo ">>> Building programs only" 596 @echo "--------------------------------------------------------------" 597.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 598 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all 599.endfor 600 601# 602# installmost 603# 604# Install the binaries built by the 'most' target. This does not include 605# libraries or include files. 606# 607installmost: 608 @echo "--------------------------------------------------------------" 609 @echo ">>> Installing programs only" 610 @echo "--------------------------------------------------------------" 611.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 612 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install 613.endfor 614 615# 616# ------------------------------------------------------------------------ 617# 618# From here onwards are utility targets used by the 'make world' and 619# related targets. If your 'world' breaks, you may like to try to fix 620# the problem and manually run the following targets to attempt to 621# complete the build. Beware, this is *not* guaranteed to work, you 622# need to have a pretty good grip on the current state of the system 623# to attempt to manually finish it. If in doubt, 'make world' again. 624# 625 626# 627# legacy: Build compatibility shims for the next three targets 628# 629legacy: 630.for _tool in tools/build 631 @${ECHODIR} "===> ${_tool}"; \ 632 cd ${.CURDIR}/${_tool}; \ 633 ${MAKE} DIRPRFX=${_tool}/ obj; \ 634 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \ 635 ${MAKE} DIRPRFX=${_tool}/ depend; \ 636 ${MAKE} DIRPRFX=${_tool}/ all; \ 637 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install 638.endfor 639 640# 641# bootstrap-tools: Build tools needed for compatibility 642# 643.if exists(${.CURDIR}/games) && !defined(NOGAMES) 644_strfile= games/fortune/strfile 645.endif 646 647.if !defined(NO_CXX) 648_gperf= gnu/usr.bin/gperf 649.if ${BOOTSTRAPPING} < 500113 650_groff= gnu/usr.bin/groff 651.else 652_groff= gnu/usr.bin/groff/tmac 653.endif 654.endif 655 656.if ${BOOTSTRAPPING} < 450005 || \ 657 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500034 658_uudecode= usr.bin/uudecode 659.endif 660 661.if ${BOOTSTRAPPING} < 430002 || \ 662 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500019 663_xargs= usr.bin/xargs 664.endif 665 666.if ${BOOTSTRAPPING} < 430002 || \ 667 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500018 668_yacc= usr.bin/yacc 669.endif 670 671.if !defined(NORESCUE) && \ 672 ${BOOTSTRAPPING} < 501100 673_crunchgen= usr.sbin/crunch/crunchgen 674.endif 675 676.if ${BOOTSTRAPPING} < 500019 677_kbdcontrol= usr.sbin/kbdcontrol 678.endif 679 680bootstrap-tools: 681.for _tool in \ 682 ${_strfile} \ 683 ${_gperf} \ 684 ${_groff} \ 685 gnu/usr.bin/texinfo \ 686 usr.bin/colldef \ 687 usr.bin/makewhatis \ 688 usr.bin/rpcgen \ 689 ${_uudecode} \ 690 ${_xargs} \ 691 usr.bin/xinstall \ 692 ${_yacc} \ 693 usr.sbin/config \ 694 ${_crunchgen} \ 695 ${_kbdcontrol} 696 @${ECHODIR} "===> ${_tool}"; \ 697 cd ${.CURDIR}/${_tool}; \ 698 ${MAKE} DIRPRFX=${_tool}/ obj; \ 699 ${MAKE} DIRPRFX=${_tool}/ depend; \ 700 ${MAKE} DIRPRFX=${_tool}/ all; \ 701 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install 702.endfor 703 704# 705# build-tools: Build special purpose build tools 706# 707.if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules) 708_aicasm= sys/modules/aic7xxx/aicasm 709.endif 710 711.if exists(${.CURDIR}/share) && !defined(NOSHARE) 712_share= share/syscons/scrnmaps 713.endif 714 715.if !defined(NO_FORTRAN) 716_fortran= gnu/usr.bin/cc/f771 717.endif 718 719.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 720 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 721_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \ 722 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl 723.endif 724 725build-tools: 726.for _tool in \ 727 bin/csh \ 728 bin/sh \ 729 rescue/rescue \ 730 gnu/usr.bin/cc/cc_tools \ 731 ${_fortran} \ 732 ${_libkrb5} \ 733 lib/libncurses \ 734 ${_share} \ 735 ${_aicasm} \ 736 usr.bin/awk \ 737 usr.bin/file \ 738 usr.sbin/sysinstall 739 @${ECHODIR} "===> ${_tool}"; \ 740 cd ${.CURDIR}/${_tool}; \ 741 ${MAKE} DIRPRFX=${_tool}/ obj; \ 742 ${MAKE} DIRPRFX=${_tool}/ build-tools 743.endfor 744 745# 746# cross-tools: Build cross-building tools 747# 748.if ${TARGET_ARCH} == "sparc64" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \ 749 ${BOOTSTRAPPING} < 500037 750_elf2aout= usr.bin/elf2aout 751.endif 752 753.if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} 754_btxld= usr.sbin/btxld 755.endif 756 757.if (!defined(NORESCUE) || \ 758 defined(RELEASEDIR)) && \ 759 ( ${TARGET_ARCH} != ${MACHINE_ARCH} || ${BOOTSTRAPPING} < 501101 ) 760_crunchide= usr.sbin/crunch/crunchide 761.endif 762 763.if ${TARGET_ARCH} == "alpha" && ${TARGET_ARCH} != ${MACHINE_ARCH} 764_elf2exe= usr.sbin/elf2exe 765.endif 766 767.if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \ 768 defined(RELEASEDIR) 769_kgzip= usr.sbin/kgzip 770.endif 771 772cross-tools: 773.for _tool in \ 774 gnu/usr.bin/binutils \ 775 gnu/usr.bin/cc \ 776 ${_elf2aout} \ 777 usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint \ 778 ${_btxld} \ 779 ${_crunchide} \ 780 ${_elf2exe} \ 781 ${_kgzip} 782 @${ECHODIR} "===> ${_tool}"; \ 783 cd ${.CURDIR}/${_tool}; \ 784 ${MAKE} DIRPRFX=${_tool}/ obj; \ 785 ${MAKE} DIRPRFX=${_tool}/ depend; \ 786 ${MAKE} DIRPRFX=${_tool}/ all; \ 787 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 788.endfor 789 790# 791# hierarchy - ensure that all the needed directories are present 792# 793hierarchy: 794 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 795 796# 797# libraries - build all libraries, and install them under ${DESTDIR}. 798# 799# The list of libraries with dependents (${_prebuild_libs}) and their 800# interdependencies (__L) are built automatically by the 801# ${.CURDIR}/tools/make_libdeps.sh script. 802# 803libraries: 804 cd ${.CURDIR}; \ 805 ${MAKE} -f Makefile.inc1 _startup_libs; \ 806 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 807 ${MAKE} -f Makefile.inc1 _generic_libs; 808 809# These dependencies are not automatically generated: 810# 811# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all 812# shared libraries for ELF. 813# 814# lib/libc (libc_pic.a) must be built before lib/libpthread. 815# 816_startup_libs= gnu/lib/csu gnu/lib/libgcc 817.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf) 818_startup_libs+= lib/csu/${MACHINE_ARCH}-elf 819.else 820_startup_libs+= lib/csu/${MACHINE_ARCH} 821.endif 822 823_prebuild_libs= 824_generic_libs= gnu/lib 825 826.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 827 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 828_prebuild_libs+= kerberos5/lib/libasn1 829_prebuild_libs+= kerberos5/lib/libgssapi 830_prebuild_libs+= kerberos5/lib/libkrb5 831_prebuild_libs+= kerberos5/lib/libroken 832_generic_libs+= kerberos5/lib 833.endif 834 835.if !defined(NOLIBPTHREAD) 836_prebuild_libs+= lib/libc 837.endif 838_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libexpat \ 839 lib/libkvm lib/libmd \ 840 lib/libncurses lib/libopie lib/libpam lib/libradius \ 841 lib/librpcsvc \ 842 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \ 843 lib/libz lib/msun 844 845lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 846lib/libypclnt__L: lib/librpcsvc__L 847 848_generic_libs+= lib 849 850.if !defined(NOCRYPT) 851.if !defined(NO_OPENSSL) 852_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl 853.if !defined(NO_OPENSSH) 854_prebuild_libs+= secure/lib/libssh 855secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L 856.endif 857.endif 858_generic_libs+= secure/lib 859.endif 860 861_generic_libs+= usr.bin/lex/lib 862 863.if ${MACHINE_ARCH} == "i386" 864_generic_libs+= usr.sbin/pcvt/keycap 865.endif 866 867.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs} 868${_lib}__L: .PHONY 869.if exists(${.CURDIR}/${_lib}) 870 @${ECHODIR} "===> ${_lib}"; \ 871 cd ${.CURDIR}/${_lib}; \ 872 ${MAKE} DIRPRFX=${_lib}/ depend; \ 873 ${MAKE} DIRPRFX=${_lib}/ all; \ 874 ${MAKE} DIRPRFX=${_lib}/ install 875.endif 876.endfor 877 878# libpam is special: we need to build static PAM modules before 879# static PAM library, and dynamic PAM library before dynamic PAM 880# modules. 881lib/libpam__L: .PHONY 882 @${ECHODIR} "===> lib/libpam"; \ 883 cd ${.CURDIR}/lib/libpam; \ 884 ${MAKE} DIRPRFX=lib/libpam/ depend; \ 885 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \ 886 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install 887 888_startup_libs: ${_startup_libs:S/$/__L/} 889_prebuild_libs: ${_prebuild_libs:S/$/__L/} 890_generic_libs: ${_generic_libs:S/$/__L/} 891 892.for __target in all clean cleandepend cleandir depend includes obj 893.for entry in ${SUBDIR} 894${entry}.${__target}__D: .PHONY 895 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 896 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 897 edir=${entry}.${MACHINE_ARCH}; \ 898 cd ${.CURDIR}/$${edir}; \ 899 else \ 900 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 901 edir=${entry}; \ 902 cd ${.CURDIR}/$${edir}; \ 903 fi; \ 904 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 905.endfor 906par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 907.endfor 908 909.include <bsd.subdir.mk> 910